2 # SPDX-License-Identifier: GPL-2.0+
12 # To see a list of typical targets execute "make help"
13 # More info can be located in ./README
14 # Comments in this file are targeted only to the developer, do not
15 # expect to learn how to build the kernel reading this file.
17 # o Do not use make's built-in rules and variables
18 # (this increases performance and avoids hard-to-debug behaviour);
19 # o Look for make include files relative to root of kernel src
20 MAKEFLAGS
+= -rR
--include-dir
=$(CURDIR
)
22 # Avoid funny character set dependencies
26 export LC_COLLATE LC_NUMERIC
28 # Avoid interference with shell env settings
31 # We are using a recursive build, so we need to do a little thinking
32 # to get the ordering right.
34 # Most importantly: sub-Makefiles should only ever modify files in
35 # their own directory. If in some directory we have a dependency on
36 # a file in another dir (which doesn't happen often, but it's often
37 # unavoidable when linking the built-in.o targets which finally
38 # turn into vmlinux), we will call a sub make in that other dir, and
39 # after that we are sure that everything which is in that other dir
42 # The only cases where we need to modify files which have global
43 # effects are thus separated out and done before the recursive
44 # descending is started. They are now explicitly listed as the
48 # ---------------------------------------------------------------------------
50 # Normally, we echo the whole command before executing it. By making
51 # that echo $($(quiet)$(cmd)), we now have the possibility to set
52 # $(quiet) to choose other forms of output instead, e.g.
54 # quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
55 # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
57 # If $(quiet) is empty, the whole command will be printed.
58 # If it is set to "quiet_", only the short version will be printed.
59 # If it is set to "silent_", nothing will be printed at all, since
60 # the variable $(silent_cmd_cc_o_c) doesn't exist.
62 # A simple variant is to prefix commands with $(Q) - that's useful
63 # for commands that shall be hidden in non-verbose mode.
67 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
68 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
70 # To put more focus on warnings, be less verbose as default
71 # Use 'make V=1' to see the full commands
73 ifeq ("$(origin V)", "command line")
80 ifeq ($(KBUILD_VERBOSE
),1)
88 # If the user is running make -s (silent mode), suppress echoing of
91 ifneq ($(filter 4.
%,$(MAKE_VERSION
)),) # make-4
92 ifneq ($(filter %s
,$(firstword x
$(MAKEFLAGS
))),)
96 ifneq ($(filter s
% -s
%,$(MAKEFLAGS
)),)
101 export quiet Q KBUILD_VERBOSE
103 # kbuild supports saving output files in a separate directory.
104 # To locate output files in a separate directory two syntaxes are supported.
105 # In both cases the working directory must be the root of the kernel src.
107 # Use "make O=dir/to/store/output/files/"
109 # 2) Set KBUILD_OUTPUT
110 # Set the environment variable KBUILD_OUTPUT to point to the directory
111 # where the output files shall be placed.
112 # export KBUILD_OUTPUT=dir/to/store/output/files/
115 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
118 # KBUILD_SRC is set on invocation of make in OBJ directory
119 # KBUILD_SRC is not intended to be used by the regular user (for now)
120 ifeq ($(KBUILD_SRC
),)
122 # OK, Make called in directory where kernel src resides
123 # Do we want to locate output files in a separate directory?
124 ifeq ("$(origin O)", "command line")
125 KBUILD_OUTPUT
:= $(O
)
128 # That's our default target when none is given on the command line
132 # Cancel implicit rules on top Makefile
133 $(CURDIR
)/Makefile Makefile
: ;
135 ifneq ($(KBUILD_OUTPUT
),)
136 # Invoke a second make in the output directory, passing relevant variables
137 # check that the output directory actually exists
138 saved-output
:= $(KBUILD_OUTPUT
)
139 KBUILD_OUTPUT
:= $(shell mkdir
-p
$(KBUILD_OUTPUT
) && cd
$(KBUILD_OUTPUT
) \
141 $(if
$(KBUILD_OUTPUT
),, \
142 $(error failed to create output directory
"$(saved-output)"))
144 PHONY
+= $(MAKECMDGOALS
) sub-make
146 $(filter-out _all sub-make
$(CURDIR
)/Makefile
, $(MAKECMDGOALS
)) _all
: sub-make
150 $(Q
)$(MAKE
) -C
$(KBUILD_OUTPUT
) KBUILD_SRC
=$(CURDIR
) \
151 -f
$(CURDIR
)/Makefile
$(filter-out _all sub-make
,$(MAKECMDGOALS
))
153 # Leave processing to above invocation of make
155 endif # ifneq ($(KBUILD_OUTPUT),)
156 endif # ifeq ($(KBUILD_SRC),)
158 # We process the rest of the Makefile if this is the final invocation of make
159 ifeq ($(skip-makefile
),)
161 # Do not print "Entering directory ...",
162 # but we want to display it when entering to the output directory
163 # so that IDEs/editors are able to understand relative filenames.
164 MAKEFLAGS
+= --no-print-directory
166 # Call a source code checker (by default, "sparse") as part of the
169 # Use 'make C=1' to enable checking of only re-compiled files.
170 # Use 'make C=2' to enable checking of *all* source files, regardless
171 # of whether they are re-compiled or not.
173 # See the file "Documentation/sparse.txt" for more details, including
174 # where to get the "sparse" utility.
176 ifeq ("$(origin C)", "command line")
177 KBUILD_CHECKSRC
= $(C
)
179 ifndef KBUILD_CHECKSRC
183 # Use make M=dir to specify directory of external module to build
184 # Old syntax make ... SUBDIRS=$PWD is still supported
185 # Setting the environment variable KBUILD_EXTMOD take precedence
187 KBUILD_EXTMOD ?
= $(SUBDIRS
)
190 ifeq ("$(origin M)", "command line")
191 KBUILD_EXTMOD
:= $(M
)
194 # If building an external module we do not care about the all: rule
195 # but instead _all depend on modules
197 ifeq ($(KBUILD_EXTMOD
),)
203 ifeq ($(KBUILD_SRC
),)
204 # building in the source tree
207 ifeq ($(KBUILD_SRC
)/,$(dir $(CURDIR
)))
208 # building in a subdirectory of the source tree
211 srctree
:= $(KBUILD_SRC
)
218 VPATH
:= $(srctree
)$(if
$(KBUILD_EXTMOD
),:$(KBUILD_EXTMOD
))
220 export srctree objtree VPATH
222 # Make sure CDPATH settings don't interfere
225 #########################################################################
227 HOSTARCH
:= $(shell uname
-m | \
229 -e s
/sun4u
/sparc64
/ \
232 -e s
/ppc64
/powerpc
/ \
234 -e s
/macppc
/powerpc
/\
237 HOSTOS
:= $(shell uname
-s | tr
'[:upper:]' '[:lower:]' | \
238 sed
-e
's/\(cygwin\).*/cygwin/')
240 export HOSTARCH HOSTOS
242 #########################################################################
244 # set default to nothing for native builds
245 ifeq ($(HOSTARCH
),$(ARCH
))
249 KCONFIG_CONFIG ?
= .config
250 export KCONFIG_CONFIG
252 # SHELL used by kbuild
253 CONFIG_SHELL
:= $(shell if
[ -x
"$$BASH" ]; then echo
$$BASH; \
254 else if
[ -x
/bin
/bash
]; then echo
/bin
/bash
; \
255 else echo sh
; fi
; fi
)
259 HOSTCFLAGS
= -Wall
-Wstrict-prototypes
-O2
-fomit-frame-pointer
262 ifeq ($(HOSTOS
),cygwin
)
266 # Mac OS X / Darwin's C preprocessor is Apple specific. It
267 # generates numerous errors and warnings. We want to bypass it
268 # and use GNU C's cpp. To do this we pass the -traditional-cpp
269 # option to the compiler. Note that the -traditional-cpp flag
270 # DOES NOT have the same semantics as GNU C's flag, all it does
271 # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
273 # Apple's linker is similar, thanks to the new 2 stage linking
274 # multiple symbol definitions are treated as errors, hence the
275 # -multiply_defined suppress option to turn off this error.
277 ifeq ($(HOSTOS
),darwin
)
278 # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
279 DARWIN_MAJOR_VERSION
= $(shell sw_vers
-productVersion | cut
-f
1 -d
'.')
280 DARWIN_MINOR_VERSION
= $(shell sw_vers
-productVersion | cut
-f
2 -d
'.')
282 os_x_before
= $(shell if
[ $(DARWIN_MAJOR_VERSION
) -le
$(1) -a \
283 $(DARWIN_MINOR_VERSION
) -le
$(2) ] ; then echo
"$(3)"; else echo
"$(4)"; fi
;)
285 # Snow Leopards build environment has no longer restrictions as described above
286 HOSTCC
= $(call os_x_before
, 10, 5, "cc", "gcc")
287 HOSTCFLAGS
+= $(call os_x_before
, 10, 4, "-traditional-cpp")
288 HOSTLDFLAGS
+= $(call os_x_before
, 10, 5, "-multiply_defined suppress")
290 # since Lion (10.7) ASLR is on by default, but we use linker generated lists
291 # in some host tools which is a problem then ... so disable ASLR for these
293 HOSTLDFLAGS
+= $(call os_x_before
, 10, 7, "", "-Xlinker -no_pie")
296 # Decide whether to build built-in, modular, or both.
297 # Normally, just do built-in.
302 # If we have only "make modules", don't compile built-in objects.
303 # When we're building modules with modversions, we need to consider
304 # the built-in objects during the descend as well, in order to
305 # make sure the checksums are up to date before we record them.
307 ifeq ($(MAKECMDGOALS
),modules
)
308 KBUILD_BUILTIN
:= $(if
$(CONFIG_MODVERSIONS
),1)
311 # If we have "make <whatever> modules", compile modules
312 # in addition to whatever we do anyway.
313 # Just "make" or "make all" shall build modules as well
315 # U-Boot does not need modules
316 #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
317 # KBUILD_MODULES := 1
320 #ifeq ($(MAKECMDGOALS),)
321 # KBUILD_MODULES := 1
324 export KBUILD_MODULES KBUILD_BUILTIN
325 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
327 # We need some generic definitions (do not try to remake the file).
328 scripts
/Kbuild.
include: ;
329 include scripts
/Kbuild.
include
331 # Make variables (CC, etc...)
333 AS
= $(CROSS_COMPILE
)as
335 ifneq ($(shell $(CROSS_COMPILE
)ld.bfd
-v
2> /dev
/null
),)
336 LD
= $(CROSS_COMPILE
)ld.bfd
338 LD
= $(CROSS_COMPILE
)ld
340 CC
= $(CROSS_COMPILE
)gcc
342 AR
= $(CROSS_COMPILE
)ar
343 NM
= $(CROSS_COMPILE
)nm
344 LDR
= $(CROSS_COMPILE
)ldr
345 STRIP
= $(CROSS_COMPILE
)strip
346 OBJCOPY
= $(CROSS_COMPILE
)objcopy
347 OBJDUMP
= $(CROSS_COMPILE
)objdump
354 CHECKFLAGS
:= -D__linux__
-Dlinux
-D__STDC__
-Dunix
-D__unix__ \
355 -Wbitwise
-Wno-return-void
-D__CHECK_ENDIAN__
$(CF
)
357 KBUILD_CPPFLAGS
:= -D__KERNEL__
-D__UBOOT__
359 KBUILD_CFLAGS
:= -Wall
-Wstrict-prototypes \
360 -Wno-format-security \
361 -fno-builtin
-ffreestanding
362 KBUILD_AFLAGS
:= -D__ASSEMBLY__
364 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
365 UBOOTRELEASE
= $(shell cat
include/config
/uboot.release
2> /dev
/null
)
366 UBOOTVERSION
= $(VERSION
)$(if
$(PATCHLEVEL
),.
$(PATCHLEVEL
)$(if
$(SUBLEVEL
),.
$(SUBLEVEL
)))$(EXTRAVERSION
)
368 export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
369 export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
370 export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
371 export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
372 export MAKE AWK PERL PYTHON
373 export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
375 export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
376 export KBUILD_CFLAGS KBUILD_AFLAGS
378 # When compiling out-of-tree modules, put MODVERDIR in the module
379 # tree rather than in the kernel tree. The kernel tree might
381 export MODVERDIR
:= $(if
$(KBUILD_EXTMOD
),$(firstword $(KBUILD_EXTMOD
))/).tmp_versions
383 # Files to ignore in find ... statements
385 export RCS_FIND_IGNORE
:= \
( -name SCCS
-o
-name BitKeeper
-o
-name .svn
-o \
386 -name CVS
-o
-name .
pc -o
-name .hg
-o
-name .git \
) \
388 export RCS_TAR_IGNORE
:= --exclude SCCS
--exclude BitKeeper
--exclude .svn \
389 --exclude CVS
--exclude .
pc --exclude .hg
--exclude .git
391 # ===========================================================================
392 # Rules shared between *config targets and build targets
394 # Basic helpers built in scripts/
395 PHONY
+= scripts_basic
397 $(Q
)$(MAKE
) $(build
)=scripts
/basic
398 $(Q
)rm -f .tmp_quiet_recordmcount
400 # To avoid any implicit rule to kick in, define an empty command.
401 scripts
/basic
/%: scripts_basic
;
403 PHONY
+= outputmakefile
404 # outputmakefile generates a Makefile in the output directory, if using a
405 # separate output directory. This allows convenient use of make in the
408 ifneq ($(KBUILD_SRC
),)
409 $(Q
)ln
-fsn
$(srctree
) source
410 $(Q
)$(CONFIG_SHELL
) $(srctree
)/scripts
/mkmakefile \
411 $(srctree
) $(objtree
) $(VERSION
) $(PATCHLEVEL
)
414 # To make sure we do not include .config for any of the *config targets
415 # catch them early, and hand them over to scripts/kconfig/Makefile
416 # It is allowed to specify more targets when calling make, including
417 # mixing *config targets and build targets.
418 # For example 'make oldconfig all'.
419 # Detect when mixed targets is specified, and make a second invocation
420 # of make so .config is not included in this case either (for *config).
422 version_h
:= include/generated
/version_autogenerated.h
423 timestamp_h
:= include/generated
/timestamp_autogenerated.h
425 no-dot-config-targets
:= clean clobber mrproper
distclean \
426 help
%docs
check% coccicheck \
433 ifneq ($(filter $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
434 ifeq ($(filter-out $(no-dot-config-targets
), $(MAKECMDGOALS
)),)
439 ifeq ($(KBUILD_EXTMOD
),)
440 ifneq ($(filter config
%config
,$(MAKECMDGOALS
)),)
442 ifneq ($(words $(MAKECMDGOALS
)),1)
448 ifeq ($(mixed-targets
),1)
449 # ===========================================================================
450 # We're called with mixed targets (*config and build targets).
451 # Handle them one by one.
453 PHONY
+= $(MAKECMDGOALS
) __build_one_by_one
455 $(filter-out __build_one_by_one
, $(MAKECMDGOALS
)): __build_one_by_one
460 for i in
$(MAKECMDGOALS
); do \
461 $(MAKE
) -f
$(srctree
)/Makefile
$$i; \
465 ifeq ($(config-targets
),1)
466 # ===========================================================================
467 # *config targets only - make sure prerequisites are updated, and descend
468 # in scripts/kconfig to make the *config target
470 KBUILD_DEFCONFIG
:= sandbox_defconfig
471 export KBUILD_DEFCONFIG KBUILD_KCONFIG
473 config
: scripts_basic outputmakefile FORCE
474 $(Q
)$(MAKE
) $(build
)=scripts
/kconfig
$@
476 %config
: scripts_basic outputmakefile FORCE
477 $(Q
)$(MAKE
) $(build
)=scripts
/kconfig
$@
480 # ===========================================================================
481 # Build targets only - this includes vmlinux, arch specific targets, clean
482 # targets and others. In general all targets except *config targets.
484 ifeq ($(dot-config
),1)
486 -include include/config
/auto.conf
488 # Read in dependencies to all Kconfig* files, make sure to run
489 # oldconfig if changes are detected.
490 -include include/config
/auto.conf.cmd
492 # To avoid any implicit rule to kick in, define an empty command
493 $(KCONFIG_CONFIG
) include/config
/auto.conf.cmd
: ;
495 # If .config is newer than include/config/auto.conf, someone tinkered
496 # with it and forgot to run make oldconfig.
497 # if auto.conf.cmd is missing then we are probably in a cleaned tree so
498 # we execute the config step to be sure to catch updated Kconfig files
499 include/config
/%.conf
: $(KCONFIG_CONFIG
) include/config
/auto.conf.cmd
500 $(Q
)$(MAKE
) -f
$(srctree
)/Makefile silentoldconfig
501 @
# If the following part fails, include/config/auto.conf should be
502 @
# deleted so "make silentoldconfig" will be re-run on the next build.
503 $(Q
)$(MAKE
) -f
$(srctree
)/scripts
/Makefile.autoconf || \
504 { rm -f
include/config
/auto.conf
; false
; }
505 @
# include/config.h has been updated after "make silentoldconfig".
506 @
# We need to touch include/config/auto.conf so it gets newer
507 @
# than include/config.h.
508 @
# Otherwise, 'make silentoldconfig' would be invoked twice.
509 $(Q
)touch
include/config
/auto.conf
511 -include include/autoconf.mk
512 -include include/autoconf.mk.dep
514 # We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf
515 # is up-to-date. When we switch to a different board configuration, old CONFIG
516 # macros are still remaining in include/config/auto.conf. Without the following
517 # gimmick, wrong config.mk would be included leading nasty warnings/errors.
518 ifneq ($(wildcard $(KCONFIG_CONFIG
)),)
519 ifneq ($(wildcard include/config
/auto.conf
),)
520 autoconf_is_old
:= $(shell find .
-path .
/$(KCONFIG_CONFIG
) -newer \
521 include/config
/auto.conf
)
522 ifeq ($(autoconf_is_old
),)
524 include arch
/$(ARCH
)/Makefile
529 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
530 # that (or fail if absent). Otherwise, search for a linker script in a
534 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
535 ifdef CONFIG_SYS_LDSCRIPT
536 # need to strip off double quotes
537 LDSCRIPT
:= $(srctree
)/$(CONFIG_SYS_LDSCRIPT
:"%"=%)
541 # If there is no specified link script, we look in a number of places for it
543 ifeq ($(wildcard $(LDSCRIPT
)),)
544 LDSCRIPT
:= $(srctree
)/board
/$(BOARDDIR
)/u-boot.lds
546 ifeq ($(wildcard $(LDSCRIPT
)),)
547 LDSCRIPT
:= $(srctree
)/$(CPUDIR
)/u-boot.lds
549 ifeq ($(wildcard $(LDSCRIPT
)),)
550 LDSCRIPT
:= $(srctree
)/arch
/$(ARCH
)/cpu
/u-boot.lds
555 # Dummy target needed, because used as prerequisite
556 include/config
/auto.conf
: ;
557 endif # $(dot-config)
559 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
566 KBUILD_CFLAGS
+= -DBUILD_TAG
='"$(BUILD_TAG)"'
569 KBUILD_CFLAGS
+= $(call cc-option
,-fno-stack-protector
)
570 KBUILD_CFLAGS
+= $(call cc-option
,-fno-delete-null-pointer-checks
)
573 # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
574 # option to the assembler.
577 # Report stack usage if supported
578 ifeq ($(shell $(CONFIG_SHELL
) $(srctree
)/scripts
/gcc-stack-usage.sh
$(CC
)),y
)
579 KBUILD_CFLAGS
+= -fstack-usage
582 KBUILD_CFLAGS
+= $(call cc-option
,-Wno-format-nonliteral
)
584 # turn jbsr into jsr for m68k
586 ifeq ($(findstring 3.4,$(shell $(CC
) --version
)),3.4)
587 KBUILD_AFLAGS
+= -Wa
,-gstabs
,-S
591 # Prohibit date/time macros, which would make the build non-deterministic
592 KBUILD_CFLAGS
+= $(call cc-option
,-Werror
=date-time
)
594 include scripts
/Makefile.extrawarn
596 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
597 KBUILD_CPPFLAGS
+= $(KCPPFLAGS
)
598 KBUILD_AFLAGS
+= $(KAFLAGS
)
599 KBUILD_CFLAGS
+= $(KCFLAGS
)
601 # Use UBOOTINCLUDE when you must reference the include/ directory.
602 # Needed to be compatible with the O= option
605 $(if
$(KBUILD_SRC
), -I
$(srctree
)/include) \
606 $(if
$(CONFIG_SYS_THUMB_BUILD
), $(if
$(CONFIG_HAS_THUMB2
),, \
607 -I
$(srctree
)/arch
/$(ARCH
)/thumb1
/include),) \
608 -I
$(srctree
)/arch
/$(ARCH
)/include \
609 -include $(srctree
)/include/linux
/kconfig.h
611 NOSTDINC_FLAGS
+= -nostdinc
-isystem
$(shell $(CC
) -print-file-name
=include)
612 CHECKFLAGS
+= $(NOSTDINC_FLAGS
)
615 cpp_flags
:= $(KBUILD_CPPFLAGS
) $(PLATFORM_CPPFLAGS
) $(UBOOTINCLUDE
) \
617 c_flags
:= $(KBUILD_CFLAGS
) $(cpp_flags
)
619 #########################################################################
620 # U-Boot objects....order is important (i.e. start must be first)
622 HAVE_VENDOR_COMMON_LIB
= $(if
$(wildcard $(srctree
)/board
/$(VENDOR
)/common
/Makefile
),y
,n
)
625 libs-
$(HAVE_VENDOR_COMMON_LIB
) += board
/$(VENDOR
)/common
/
626 libs-
$(CONFIG_OF_EMBED
) += dts
/
631 libs-y
+= drivers
/dma
/
632 libs-y
+= drivers
/gpio
/
633 libs-y
+= drivers
/i2c
/
634 libs-y
+= drivers
/mmc
/
635 libs-y
+= drivers
/mtd
/
636 libs-
$(CONFIG_CMD_NAND
) += drivers
/mtd
/nand
/
637 libs-y
+= drivers
/mtd
/onenand
/
638 libs-
$(CONFIG_CMD_UBI
) += drivers
/mtd
/ubi
/
639 libs-y
+= drivers
/mtd
/spi
/
640 libs-y
+= drivers
/net
/
641 libs-y
+= drivers
/net
/phy
/
642 libs-y
+= drivers
/pci
/
643 libs-y
+= drivers
/power
/ \
644 drivers
/power
/fuel_gauge
/ \
646 drivers
/power
/pmic
/ \
647 drivers
/power
/battery
/ \
648 drivers
/power
/regulator
/
649 libs-y
+= drivers
/spi
/
650 libs-
$(CONFIG_FMAN_ENET
) += drivers
/net
/fm
/
651 libs-
$(CONFIG_SYS_FSL_DDR
) += drivers
/ddr
/fsl
/
652 libs-
$(CONFIG_ALTERA_SDRAM
) += drivers
/ddr
/altera
/
653 libs-y
+= drivers
/serial
/
654 libs-y
+= drivers
/usb
/dwc3
/
655 libs-y
+= drivers
/usb
/emul
/
656 libs-y
+= drivers
/usb
/eth
/
657 libs-y
+= drivers
/usb
/gadget
/
658 libs-y
+= drivers
/usb
/gadget
/udc
/
659 libs-y
+= drivers
/usb
/host
/
660 libs-y
+= drivers
/usb
/musb
/
661 libs-y
+= drivers
/usb
/musb-new
/
662 libs-y
+= drivers
/usb
/phy
/
663 libs-y
+= drivers
/usb
/ulpi
/
666 libs-
$(CONFIG_API
) += api
/
667 libs-
$(CONFIG_HAS_POST
) += post
/
670 libs-
$(CONFIG_UT_ENV
) += test/env
/
672 libs-y
+= $(if
$(BOARDDIR
),board
/$(BOARDDIR
)/)
674 libs-y
:= $(sort $(libs-y
))
676 u-boot-dirs
:= $(patsubst %/,%,$(filter %/, $(libs-y
))) tools examples
678 u-boot-alldirs
:= $(sort $(u-boot-dirs
) $(patsubst %/,%,$(filter %/, $(libs-
))))
680 libs-y
:= $(patsubst %/, %/built-in.o
, $(libs-y
))
682 u-boot-init
:= $(head-y
)
683 u-boot-main
:= $(libs-y
)
687 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC
),y
)
688 PLATFORM_LIBGCC
= arch
/$(ARCH
)/lib
/lib.a
690 PLATFORM_LIBGCC
:= -L
$(shell dirname
`$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
692 PLATFORM_LIBS
+= $(PLATFORM_LIBGCC
)
694 export PLATFORM_LIBGCC
696 # Special flags for CPP when processing the linker script.
697 # Pass the version down so we can handle backwards compatibility
700 -include $(srctree
)/include/u-boot
/u-boot.lds.h \
702 $(shell $(LD
) --version | \
703 sed
-ne
's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
705 #########################################################################
706 #########################################################################
708 ifneq ($(CONFIG_BOARD_SIZE_LIMIT
),)
710 @actual
=`wc -c $@ | awk '{print $$1}'`; \
711 limit
=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
712 if
test $$actual -gt
$$limit; then \
713 echo
"$@ exceeds file size limit:" >&2 ; \
714 echo
" limit: $$limit bytes" >&2 ; \
715 echo
" actual: $$actual bytes" >&2 ; \
716 echo
" excess: $$((actual - limit)) bytes" >&2; \
723 # Statically apply RELA-style relocations (currently arm64 only)
724 ifneq ($(CONFIG_STATIC_RELA
),)
725 # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
727 start
=$$($(NM
) $(1) | grep __rel_dyn_start | cut
-f
1 -d
' '); \
728 end
=$$($(NM
) $(1) | grep __rel_dyn_end | cut
-f
1 -d
' '); \
729 tools
/relocate-rela
$(2) $(3) $$start $$end
734 # Always append ALL so that arch config.mk's can add custom ones
735 ALL-y
+= u-boot.srec u-boot.bin System.map u-boot.cfg binary_size_check
737 ALL-
$(CONFIG_ONENAND_U_BOOT
) += u-boot-onenand.bin
738 ifeq ($(CONFIG_SPL_FSL_PBL
),y
)
739 ALL-
$(CONFIG_RAMBOOT_PBL
) += u-boot-with-spl-pbl.bin
741 ifneq ($(CONFIG_SECURE_BOOT
), y
)
742 # For Secure Boot The Image needs to be signed and Header must also
743 # be included. So The image has to be built explicitly
744 ALL-
$(CONFIG_RAMBOOT_PBL
) += u-boot.pbl
747 ALL-
$(CONFIG_SPL
) += spl
/u-boot-spl.bin
748 ALL-
$(CONFIG_SPL_FRAMEWORK
) += u-boot.img
749 ALL-
$(CONFIG_TPL
) += tpl
/u-boot-tpl.bin
750 ALL-
$(CONFIG_OF_SEPARATE
) += u-boot.dtb u-boot-dtb.bin
751 ifeq ($(CONFIG_SPL_FRAMEWORK
),y
)
752 ALL-
$(CONFIG_OF_SEPARATE
) += u-boot-dtb.img
754 ALL-
$(CONFIG_OF_HOSTFILE
) += u-boot.dtb
755 ifneq ($(CONFIG_SPL_TARGET
),)
756 ALL-
$(CONFIG_SPL
) += $(CONFIG_SPL_TARGET
:"%"=%)
758 ALL-
$(CONFIG_REMAKE_ELF
) += u-boot.elf
759 ALL-
$(CONFIG_EFI_APP
) += u-boot-app.efi
760 ALL-
$(CONFIG_EFI_STUB
) += u-boot-payload.efi
762 ifneq ($(BUILD_ROM
),)
763 ALL-
$(CONFIG_X86_RESET_VECTOR
) += u-boot.rom
766 # enable combined SPL/u-boot/dtb rules for tegra
767 ifneq ($(CONFIG_TEGRA
),)
768 ifeq ($(CONFIG_SPL
),y
)
769 ifeq ($(CONFIG_OF_SEPARATE
),y
)
770 ALL-y
+= u-boot-dtb-tegra.bin
772 ALL-y
+= u-boot-nodtb-tegra.bin
777 # Add optional build target if defined in board/cpu/soc headers
778 ifneq ($(CONFIG_BUILD_TARGET
),)
779 ALL-y
+= $(CONFIG_BUILD_TARGET
:"%"=%)
782 LDFLAGS_u-boot
+= $(LDFLAGS_FINAL
)
783 ifneq ($(CONFIG_SYS_TEXT_BASE
),)
784 LDFLAGS_u-boot
+= -Ttext
$(CONFIG_SYS_TEXT_BASE
)
787 # Normally we fill empty space with 0xff
788 quiet_cmd_objcopy
= OBJCOPY
$@
789 cmd_objcopy
= $(OBJCOPY
) --gap-fill
=0xff $(OBJCOPYFLAGS
) \
790 $(OBJCOPYFLAGS_
$(@F
)) $< $@
792 # Provide a version which does not do this, for use by EFI
793 quiet_cmd_zobjcopy
= OBJCOPY
$@
794 cmd_zobjcopy
= $(OBJCOPY
) $(OBJCOPYFLAGS
) $(OBJCOPYFLAGS_
$(@F
)) $< $@
796 quiet_cmd_efipayload
= OBJCOPY
$@
797 cmd_efipayload
= $(OBJCOPY
) -I binary
-O
$(EFIPAYLOAD_BFDTARGET
) -B
$(EFIPAYLOAD_BFDARCH
) $< $@
799 quiet_cmd_mkimage
= MKIMAGE
$@
800 cmd_mkimage
= $(objtree
)/tools
/mkimage
$(MKIMAGEFLAGS_
$(@F
)) -d
$< $@ \
801 $(if
$(KBUILD_VERBOSE
:1=), >/dev
/null
)
803 quiet_cmd_cat
= CAT
$@
804 cmd_cat
= cat
$(filter-out $(PHONY
), $^
) > $@
806 append
= cat
$(filter-out $< $(PHONY
), $^
) >> $@
808 quiet_cmd_pad_cat
= CAT
$@
809 cmd_pad_cat
= $(cmd_objcopy
) && $(append
) ||
rm -f
$@
812 ifneq ($(CONFIG_SYS_GENERIC_BOARD
),y
)
813 @echo
"===================== WARNING ======================"
814 @echo
"Please convert this board to generic board."
815 @echo
"Otherwise it will be removed by the end of 2014."
816 @echo
"See doc/README.generic-board for further information"
817 @echo
"===================================================="
819 ifeq ($(CONFIG_DM_I2C_COMPAT
),y
)
820 @echo
"===================== WARNING ======================"
821 @echo
"This board uses CONFIG_DM_I2C_COMPAT. Please remove"
822 @echo
"(possibly in a subsequent patch in your series)"
823 @echo
"before sending patches to the mailing list."
824 @echo
"===================================================="
828 dtbs dts
/dt.dtb
: checkdtc u-boot
829 $(Q
)$(MAKE
) $(build
)=dts dtbs
831 u-boot-dtb.bin
: u-boot.bin dts
/dt.dtb FORCE
832 $(call if_changed
,cat
)
835 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
837 quiet_cmd_copy
= COPY
$@
840 u-boot.dtb
: dts
/dt.dtb
843 OBJCOPYFLAGS_u-boot.hex
:= -O ihex
845 OBJCOPYFLAGS_u-boot.srec
:= -O srec
847 u-boot.hex u-boot.srec
: u-boot FORCE
848 $(call if_changed
,objcopy
)
850 OBJCOPYFLAGS_u-boot.bin
:= -O binary \
851 $(if
$(CONFIG_X86_RESET_VECTOR
),-R .start16
-R .resetvec
)
853 binary_size_check
: u-boot.bin FORCE
854 @file_size
=$(shell wc
-c u-boot.bin | awk
'{print $$1}') ; \
855 map_size
=$(shell cat u-boot.map | \
856 awk
'/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
859 if
[ "" != "$$map_size" ]; then \
860 if
test $$map_size -ne
$$file_size; then \
861 echo
"u-boot.map shows a binary size of $$map_size" >&2 ; \
862 echo
" but u-boot.bin shows $$file_size" >&2 ; \
867 u-boot.bin
: u-boot FORCE
868 $(call if_changed
,objcopy
)
869 $(call DO_STATIC_RELA
,$<,$@
,$(CONFIG_SYS_TEXT_BASE
))
874 $(LDR
) -T
$(CONFIG_CPU
) -c
$@
$< $(LDR_FLAGS
)
877 OBJCOPYFLAGS_u-boot.ldr.hex
:= -I binary
-O ihex
879 OBJCOPYFLAGS_u-boot.ldr.srec
:= -I binary
-O srec
881 u-boot.ldr.hex u-boot.ldr.srec
: u-boot.ldr FORCE
882 $(call if_changed
,objcopy
)
885 # U-Boot entry point, needed for booting of full-blown U-Boot
886 # from the SPL U-Boot version.
888 ifndef CONFIG_SYS_UBOOT_START
889 CONFIG_SYS_UBOOT_START
:= 0
892 # Create a file containing the configuration options the image was built with
893 quiet_cmd_cpp_cfg
= CFG
$@
894 cmd_cpp_cfg
= $(CPP
) -Wp
,-MD
,$(depfile
) $(cpp_flags
) $(LDPPFLAGS
) -ansi \
895 -DDO_DEPS_ONLY
-D__ASSEMBLY__
-x assembler-with-cpp
-P
-dM
-E
-o
$@
$<
897 MKIMAGEFLAGS_u-boot.img
= -A
$(ARCH
) -T firmware
-C none
-O u-boot \
898 -a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_UBOOT_START
) \
899 -n
"U-Boot $(UBOOTRELEASE) for $(BOARD) board"
901 MKIMAGEFLAGS_u-boot.kwb
= -n
$(srctree
)/$(CONFIG_SYS_KWD_CONFIG
:"%"=%) \
902 -T kwbimage
-a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_TEXT_BASE
)
904 MKIMAGEFLAGS_u-boot-spl.kwb
= -n
$(srctree
)/$(CONFIG_SYS_KWD_CONFIG
:"%"=%) \
905 -T kwbimage
-a
$(CONFIG_SYS_TEXT_BASE
) -e
$(CONFIG_SYS_TEXT_BASE
)
907 MKIMAGEFLAGS_u-boot.pbl
= -n
$(srctree
)/$(CONFIG_SYS_FSL_PBL_RCW
:"%"=%) \
908 -R
$(srctree
)/$(CONFIG_SYS_FSL_PBL_PBI
:"%"=%) -T pblimage
910 u-boot.img u-boot.kwb u-boot.pbl
: u-boot.bin FORCE
911 $(call if_changed
,mkimage
)
913 u-boot-spl.kwb
: u-boot-dtb.img spl
/u-boot-spl.bin FORCE
914 $(call if_changed
,mkimage
)
916 MKIMAGEFLAGS_u-boot-dtb.img
= $(MKIMAGEFLAGS_u-boot.img
)
918 u-boot-dtb.img
: u-boot-dtb.bin FORCE
919 $(call if_changed
,mkimage
)
921 u-boot.sha1
: u-boot.bin
922 tools
/ubsha1 u-boot.bin
925 $(OBJDUMP
) -d
$< > $@
927 u-boot.cfg
: include/config.h
928 $(call if_changed
,cpp_cfg
)
931 SPL_PAYLOAD
:= tpl
/u-boot-with-tpl.bin
933 SPL_PAYLOAD
:= u-boot.bin
936 OBJCOPYFLAGS_u-boot-with-spl.bin
= -I binary
-O binary \
937 --pad-to
=$(CONFIG_SPL_PAD_TO
)
938 u-boot-with-spl.bin
: spl
/u-boot-spl.bin
$(SPL_PAYLOAD
) FORCE
939 $(call if_changed
,pad_cat
)
941 MKIMAGEFLAGS_lpc32xx-spl.img
= -T lpc32xximage
-a
$(CONFIG_SPL_TEXT_BASE
)
943 lpc32xx-spl.img
: spl
/u-boot-spl.bin FORCE
944 $(call if_changed
,mkimage
)
946 OBJCOPYFLAGS_lpc32xx-boot-0.bin
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
)
948 lpc32xx-boot-0.bin
: lpc32xx-spl.img
949 $(call if_changed
,objcopy
)
951 OBJCOPYFLAGS_lpc32xx-boot-1.bin
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
)
953 lpc32xx-boot-1.bin
: lpc32xx-spl.img
954 $(call if_changed
,objcopy
)
956 lpc32xx-full.bin
: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img
957 $(call if_changed
,cat
)
959 CLEAN_FILES
+= lpc32xx-
*
961 OBJCOPYFLAGS_u-boot-with-tpl.bin
= -I binary
-O binary \
962 --pad-to
=$(CONFIG_TPL_PAD_TO
)
963 tpl
/u-boot-with-tpl.bin
: tpl
/u-boot-tpl.bin u-boot.bin FORCE
964 $(call if_changed
,pad_cat
)
966 SPL
: spl
/u-boot-spl.bin FORCE
967 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
969 u-boot-with-spl.imx u-boot-with-nand-spl.imx
: SPL u-boot.bin FORCE
970 $(Q
)$(MAKE
) $(build
)=arch
/arm
/imx-common
$@
972 MKIMAGEFLAGS_u-boot.ubl
= -n
$(UBL_CONFIG
) -T ublimage
-e
$(CONFIG_SYS_TEXT_BASE
)
974 u-boot.ubl
: u-boot-with-spl.bin FORCE
975 $(call if_changed
,mkimage
)
977 MKIMAGEFLAGS_u-boot-spl.ais
= -s
-n
$(if
$(CONFIG_AIS_CONFIG_FILE
), \
978 $(srctree
)/$(CONFIG_AIS_CONFIG_FILE
:"%"=%),"/dev/null") \
979 -T aisimage
-e
$(CONFIG_SPL_TEXT_BASE
)
980 spl
/u-boot-spl.ais
: spl
/u-boot-spl.bin FORCE
981 $(call if_changed
,mkimage
)
983 OBJCOPYFLAGS_u-boot.ais
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
)
984 u-boot.ais
: spl
/u-boot-spl.ais u-boot.img FORCE
985 $(call if_changed
,pad_cat
)
987 u-boot-signed.sb
: u-boot.bin spl
/u-boot-spl.bin
988 $(Q
)$(MAKE
) $(build
)=arch
/arm
/cpu
/arm926ejs
/mxs u-boot-signed.sb
989 u-boot.sb
: u-boot.bin spl
/u-boot-spl.bin
990 $(Q
)$(MAKE
) $(build
)=arch
/arm
/cpu
/arm926ejs
/mxs u-boot.sb
992 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
993 # Both images are created using mkimage (crc etc), so that the ROM
994 # bootloader can check its integrity. Padding needs to be done to the
995 # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
996 # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
997 # The resulting image containing both U-Boot images is called u-boot.spr
998 MKIMAGEFLAGS_u-boot-spl.img
= -A
$(ARCH
) -T firmware
-C none \
999 -a
$(CONFIG_SPL_TEXT_BASE
) -e
$(CONFIG_SPL_TEXT_BASE
) -n XLOADER
1000 spl
/u-boot-spl.img
: spl
/u-boot-spl.bin FORCE
1001 $(call if_changed
,mkimage
)
1003 OBJCOPYFLAGS_u-boot.spr
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
1005 u-boot.spr
: spl
/u-boot-spl.img u-boot.img FORCE
1006 $(call if_changed
,pad_cat
)
1008 ifneq ($(CONFIG_ARCH_SOCFPGA
),)
1009 quiet_cmd_socboot
= SOCBOOT
$@
1010 cmd_socboot
= cat spl
/u-boot-spl-dtb.sfp spl
/u-boot-spl-dtb.sfp \
1011 spl
/u-boot-spl-dtb.sfp spl
/u-boot-spl-dtb.sfp \
1012 u-boot-dtb.img
> $@ ||
rm -f
$@
1013 u-boot-with-spl-dtb.sfp
: spl
/u-boot-spl-dtb.sfp u-boot-dtb.img FORCE
1014 $(call if_changed
,socboot
)
1017 # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
1018 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
1020 ifneq ($(CONFIG_X86_RESET_VECTOR
),)
1021 rom
: u-boot.rom FORCE
1023 IFDTOOL
=$(objtree
)/tools
/ifdtool
1024 IFDTOOL_FLAGS
= -f
0:$(objtree
)/u-boot.dtb
1025 IFDTOOL_FLAGS
+= -m
0x
$(shell $(NM
) u-boot |grep _dt_ucode_base_size |cut
-d
' ' -f1
)
1026 IFDTOOL_FLAGS
+= -U
$(CONFIG_SYS_TEXT_BASE
):$(objtree
)/u-boot.bin
1027 IFDTOOL_FLAGS
+= -w
$(CONFIG_SYS_X86_START16
):$(objtree
)/u-boot-x86-16bit.bin
1030 ifneq ($(CONFIG_HAVE_INTEL_ME
),)
1031 IFDTOOL_ME_FLAGS
= -D
$(srctree
)/board
/$(BOARDDIR
)/descriptor.bin
1032 IFDTOOL_ME_FLAGS
+= -i ME
:$(srctree
)/board
/$(BOARDDIR
)/me.bin
1035 ifneq ($(CONFIG_HAVE_MRC
),)
1036 IFDTOOL_FLAGS
+= -w
$(CONFIG_X86_MRC_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/mrc.bin
1039 ifneq ($(CONFIG_HAVE_FSP
),)
1040 IFDTOOL_FLAGS
+= -w
$(CONFIG_FSP_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/$(CONFIG_FSP_FILE
)
1043 ifneq ($(CONFIG_HAVE_CMC
),)
1044 IFDTOOL_FLAGS
+= -w
$(CONFIG_CMC_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/$(CONFIG_CMC_FILE
)
1047 ifneq ($(CONFIG_HAVE_VGA_BIOS
),)
1048 IFDTOOL_FLAGS
+= -w
$(CONFIG_VGA_BIOS_ADDR
):$(srctree
)/board
/$(BOARDDIR
)/$(CONFIG_VGA_BIOS_FILE
)
1051 quiet_cmd_ifdtool
= IFDTOOL
$@
1052 cmd_ifdtool
= $(IFDTOOL
) -c
-r
$(CONFIG_ROM_SIZE
) u-boot.tmp
;
1053 ifneq ($(CONFIG_HAVE_INTEL_ME
),)
1054 cmd_ifdtool
+= $(IFDTOOL
) $(IFDTOOL_ME_FLAGS
) u-boot.tmp
;
1056 cmd_ifdtool
+= $(IFDTOOL
) $(IFDTOOL_FLAGS
) u-boot.tmp
;
1057 cmd_ifdtool
+= mv u-boot.tmp
$@
1059 u-boot.rom
: u-boot-x86-16bit.bin u-boot-dtb.bin
1060 $(call if_changed
,ifdtool
)
1062 OBJCOPYFLAGS_u-boot-x86-16bit.bin
:= -O binary
-j .start16
-j .resetvec
1063 u-boot-x86-16bit.bin
: u-boot FORCE
1064 $(call if_changed
,objcopy
)
1067 ifneq ($(CONFIG_SUNXI
),)
1068 OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin
= -I binary
-O binary \
1069 --pad-to
=$(CONFIG_SPL_PAD_TO
) --gap-fill
=0xff
1070 u-boot-sunxi-with-spl.bin
: spl
/sunxi-spl.bin \
1071 u-boot
$(if
$(CONFIG_OF_CONTROL
),-dtb
,).img FORCE
1072 $(call if_changed
,pad_cat
)
1075 ifneq ($(CONFIG_TEGRA
),)
1076 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin
= -O binary
--pad-to
=$(CONFIG_SYS_TEXT_BASE
)
1077 u-boot-nodtb-tegra.bin
: spl
/u-boot-spl u-boot.bin FORCE
1078 $(call if_changed
,pad_cat
)
1080 ifeq ($(CONFIG_OF_SEPARATE
),y
)
1081 u-boot-dtb-tegra.bin
: u-boot-nodtb-tegra.bin dts
/dt.dtb FORCE
1082 $(call if_changed
,cat
)
1086 OBJCOPYFLAGS_u-boot-app.efi
:= $(OBJCOPYFLAGS_EFI
)
1087 u-boot-app.efi
: u-boot FORCE
1088 $(call if_changed
,zobjcopy
)
1090 u-boot-dtb.bin.o
: u-boot-dtb.bin FORCE
1091 $(call if_changed
,efipayload
)
1093 u-boot-payload.lds
: $(LDSCRIPT_EFI
) FORCE
1094 $(call if_changed_dep
,cpp_lds
)
1096 # Rule to link the EFI payload which contains a stub and a U-Boot binary
1097 quiet_cmd_u-boot_payload ?
= LD
$@
1098 cmd_u-boot_payload ?
= $(LD
) $(LDFLAGS_EFI_PAYLOAD
) -o
$@ \
1099 -T u-boot-payload.lds arch
/x86
/cpu
/call32.o \
1100 lib
/efi
/efi.o lib
/efi
/efi_stub.o u-boot-dtb.bin.o \
1101 $(addprefix arch
/$(ARCH
)/lib
/efi
/,$(EFISTUB
))
1103 u-boot-payload
: u-boot-dtb.bin.o u-boot-payload.lds FORCE
1104 $(call if_changed
,u-boot_payload
)
1106 OBJCOPYFLAGS_u-boot-payload.efi
:= $(OBJCOPYFLAGS_EFI
)
1107 u-boot-payload.efi
: u-boot-payload FORCE
1108 $(call if_changed
,zobjcopy
)
1110 u-boot-img.bin
: spl
/u-boot-spl.bin u-boot.img FORCE
1111 $(call if_changed
,cat
)
1113 #Add a target to create boot binary having SPL binary in PBI format
1114 #concatenated with u-boot binary. It is need by PowerPC SoC having
1115 #internal SRAM <= 512KB.
1116 MKIMAGEFLAGS_u-boot-spl.pbl
= -n
$(srctree
)/$(CONFIG_SYS_FSL_PBL_RCW
:"%"=%) \
1117 -R
$(srctree
)/$(CONFIG_SYS_FSL_PBL_PBI
:"%"=%) -T pblimage \
1118 -A
$(ARCH
) -a
$(CONFIG_SPL_TEXT_BASE
)
1120 spl
/u-boot-spl.pbl
: spl
/u-boot-spl.bin FORCE
1121 $(call if_changed
,mkimage
)
1124 ifdef CONFIG_OF_CONTROL
1125 UBOOT_BINLOAD
:= u-boot-dtb.img
1127 UBOOT_BINLOAD
:= u-boot.img
1130 UBOOT_BINLOAD
:= u-boot.bin
1133 OBJCOPYFLAGS_u-boot-with-spl-pbl.bin
= -I binary
-O binary
--pad-to
=$(CONFIG_SPL_PAD_TO
) \
1136 u-boot-with-spl-pbl.bin
: spl
/u-boot-spl.pbl
$(UBOOT_BINLOAD
) FORCE
1137 $(call if_changed
,pad_cat
)
1139 # PPC4xx needs the SPL at the end of the image, since the reset vector
1140 # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
1141 # and need to introduce a new build target with the full blown U-Boot
1142 # at the start padded up to the start of the SPL image. And then concat
1143 # the SPL image to the end.
1145 OBJCOPYFLAGS_u-boot-img-spl-at-end.bin
:= -I binary
-O binary \
1146 --pad-to
=$(CONFIG_UBOOT_PAD_TO
) --gap-fill
=0xff
1147 u-boot-img-spl-at-end.bin
: u-boot.img spl
/u-boot-spl.bin FORCE
1148 $(call if_changed
,pad_cat
)
1150 # Create a new ELF from a raw binary file. This is useful for arm64
1151 # where static relocation needs to be performed on the raw binary,
1152 # but certain simulators only accept an ELF file (but don't do the
1154 # FIXME refactor dts/Makefile to share target/arch detection
1155 u-boot.elf
: u-boot.bin
1156 @
$(OBJCOPY
) -B aarch64
-I binary
-O elf64-littleaarch64 \
1158 @
$(LD
) u-boot-elf.o
-o
$@ \
1159 --defsym
=_start
=$(CONFIG_SYS_TEXT_BASE
) \
1160 -Ttext
=$(CONFIG_SYS_TEXT_BASE
)
1162 # Rule to link u-boot
1163 # May be overridden by arch/$(ARCH)/config.mk
1164 quiet_cmd_u-boot__ ?
= LD
$@
1165 cmd_u-boot__ ?
= $(LD
) $(LDFLAGS
) $(LDFLAGS_u-boot
) -o
$@ \
1166 -T u-boot.lds
$(u-boot-init
) \
1167 --start-group
$(u-boot-main
) --end-group \
1168 $(PLATFORM_LIBS
) -Map u-boot.map
1170 quiet_cmd_smap
= GEN common
/system_map.o
1172 smap
=`$(call SYSTEM_MAP,u-boot) | \
1173 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
1174 $(CC
) $(c_flags
) -DSYSTEM_MAP
="\"$${smap}\"" \
1175 -c
$(srctree
)/common
/system_map.c
-o common
/system_map.o
1177 u-boot
: $(u-boot-init
) $(u-boot-main
) u-boot.lds
1178 $(call if_changed
,u-boot__
)
1179 ifeq ($(CONFIG_KALLSYMS
),y
)
1181 $(call cmd
,u-boot__
) common
/system_map.o
1184 # The actual objects are generated when descending,
1185 # make sure no implicit rule kicks in
1186 $(sort $(u-boot-init
) $(u-boot-main
)): $(u-boot-dirs
) ;
1188 # Handle descending into subdirectories listed in $(vmlinux-dirs)
1189 # Preset locale variables to speed up the build process. Limit locale
1190 # tweaks to this spot to avoid wrong language settings when running
1191 # make menuconfig etc.
1192 # Error messages still appears in the original language
1194 PHONY
+= $(u-boot-dirs
)
1195 $(u-boot-dirs
): prepare scripts
1196 $(Q
)$(MAKE
) $(build
)=$@
1199 # The "tools" are needed early
1200 $(filter-out tools
, $(u-boot-dirs
)): tools
1201 # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1202 # is "yes"), so compile examples after U-Boot is compiled.
1203 examples
: $(filter-out examples
, $(u-boot-dirs
))
1205 define filechk_uboot.release
1206 echo
"$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1209 # Store (new) UBOOTRELEASE string in include/config/uboot.release
1210 include/config
/uboot.release
: include/config
/auto.conf FORCE
1211 $(call filechk
,uboot.release
)
1214 # Things we need to do before we recursively start building the kernel
1215 # or the modules are listed in "prepare".
1216 # A multi level approach is used. prepareN is processed before prepareN-1.
1217 # archprepare is used in arch Makefiles and when processed asm symlink,
1218 # version.h and scripts_basic is processed / created.
1220 # Listed in dependency order
1221 PHONY
+= prepare archprepare prepare0 prepare1 prepare2 prepare3
1223 # prepare3 is used to check if we are building in a separate output directory,
1225 # 1) Check that make has not been executed in the kernel src $(srctree)
1226 prepare3
: include/config
/uboot.release
1227 ifneq ($(KBUILD_SRC
),)
1228 @
$(kecho
) ' Using $(srctree) as source for U-Boot'
1229 $(Q
)if
[ -f
$(srctree
)/.config
-o
-d
$(srctree
)/include/config
]; then \
1230 echo
>&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1231 echo
>&2 " in the '$(srctree)' directory.";\
1236 # prepare2 creates a makefile if using a separate output directory
1237 prepare2
: prepare3 outputmakefile
1239 prepare1
: prepare2
$(version_h
) $(timestamp_h
) \
1240 include/config
/auto.conf
1241 ifeq ($(CONFIG_HAVE_GENERIC_BOARD
),)
1242 ifeq ($(CONFIG_SYS_GENERIC_BOARD
),y
)
1243 @echo
>&2 " Your architecture does not support generic board."
1244 @echo
>&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
1248 ifeq ($(wildcard $(LDSCRIPT
)),)
1249 @echo
>&2 " Could not find linker script."
1253 archprepare
: prepare1 scripts_basic
1255 prepare0
: archprepare FORCE
1256 $(Q
)$(MAKE
) $(build
)=.
1258 # All the preparing..
1261 # Generate some files
1262 # ---------------------------------------------------------------------------
1264 define filechk_version.h
1265 (echo \
#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1266 echo \
#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1267 echo \
#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
1268 echo \
#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
1271 # The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
1272 # The BSD date on the other hand behaves different and would produce errors
1273 # with the misused '-d' switch. Respect that and search a working date with
1274 # well known pre- and suffixes for the GNU variant of date.
1275 define filechk_timestamp.h
1276 (if
test -n
"$${SOURCE_DATE_EPOCH}"; then \
1277 SOURCE_DATE
="@$${SOURCE_DATE_EPOCH}"; \
1279 for date in gdate date.gnu date
; do \
1280 $${date} -u
-d
"$${SOURCE_DATE}" >/dev
/null
2>&1 && DATE
="$${date}"; \
1282 if
test -n
"$${DATE}"; then \
1283 LC_ALL
=C
$${DATE} -u
-d
"$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
1284 LC_ALL
=C
$${DATE} -u
-d
"$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
1285 LC_ALL
=C
$${DATE} -u
-d
"$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
1286 LC_ALL
=C
$${DATE} -u
-d
"$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1291 LC_ALL
=C date
+'#define U_BOOT_DATE "%b %d %C%y"'; \
1292 LC_ALL
=C date
+'#define U_BOOT_TIME "%T"'; \
1293 LC_ALL
=C date
+'#define U_BOOT_TZ "%z"'; \
1294 LC_ALL
=C date
+'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
1298 $(version_h
): include/config
/uboot.release FORCE
1299 $(call filechk
,version.h
)
1301 $(timestamp_h
): $(srctree
)/Makefile FORCE
1302 $(call filechk
,timestamp.h
)
1304 # ---------------------------------------------------------------------------
1305 quiet_cmd_cpp_lds
= LDS
$@
1306 cmd_cpp_lds
= $(CPP
) -Wp
,-MD
,$(depfile
) $(cpp_flags
) $(LDPPFLAGS
) -ansi \
1307 -D__ASSEMBLY__
-x assembler-with-cpp
-P
-o
$@
$<
1309 u-boot.lds
: $(LDSCRIPT
) prepare FORCE
1310 $(call if_changed_dep
,cpp_lds
)
1312 spl
/u-boot-spl.bin
: spl
/u-boot-spl
1314 spl
/u-boot-spl
: tools prepare
$(if
$(CONFIG_OF_SEPARATE
),dts
/dt.dtb
)
1315 $(Q
)$(MAKE
) obj
=spl
-f
$(srctree
)/scripts
/Makefile.spl
all
1317 spl
/sunxi-spl.bin
: spl
/u-boot-spl
1320 spl
/u-boot-spl-dtb.sfp
: spl
/u-boot-spl
1323 spl
/boot.bin
: spl
/u-boot-spl
1326 tpl
/u-boot-tpl.bin
: tools prepare
1327 $(Q
)$(MAKE
) obj
=tpl
-f
$(srctree
)/scripts
/Makefile.spl
all
1329 TAG_SUBDIRS
:= $(patsubst %,$(srctree
)/%,$(u-boot-dirs
) include)
1335 ctags
-w
-o ctags
`$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1336 -name '*.[chS]' -print`
1340 etags
-a
-o etags
`$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1341 -name '*.[chS]' -print`
1343 $(FIND
) $(FINDFLAGS
) $(TAG_SUBDIRS
) -name
'*.[chS]' -print > \
1349 grep
-v
'\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1352 @
$(call SYSTEM_MAP
,$<) > $@
1355 @if
test $(call dtc-version
) -lt
0104; then \
1356 echo
'*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1360 #########################################################################
1362 # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1363 # R_AARCH64_RELATIVE (64-bit).
1364 checkarmreloc
: u-boot
1365 @RELOC
="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1366 grep R_A | sort -u`"; \
1367 if
test "$$RELOC" != "R_ARM_RELATIVE" -a \
1368 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1369 echo
"$< contains unexpected relocations: $$RELOC"; \
1374 $(Q
)$(MAKE
) $(build
)=tools
/$@
1376 tools-only
: scripts_basic
$(version_h
) $(timestamp_h
)
1377 $(Q
)$(MAKE
) $(build
)=tools
1379 tools-all
: export HOST_TOOLS_ALL
=y
1380 tools-all
: env tools
;
1382 cross_tools
: export CROSS_BUILD_TOOLS
=y
1383 cross_tools
: tools
;
1387 git log
--no-merges U-Boot-1_1_5.. | \
1388 unexpand
-a | sed
-e
's/\s\s*$$//' > $@
1390 include/license.h
: tools
/bin2header COPYING
1391 cat COPYING | gzip
-9 -c | .
/tools
/bin2header license_gzip
> include/license.h
1392 #########################################################################
1395 # Cleaning is done on three levels.
1396 # make clean Delete most generated files
1397 # Leave enough to build external modules
1398 # make mrproper Delete the current configuration, and all generated files
1399 # make distclean Remove editor backup files, patch leftover files and the like
1401 # Directories & files removed with 'make clean'
1402 CLEAN_DIRS
+= $(MODVERDIR
) \
1403 $(foreach d
, spl tpl
, $(patsubst %,$d/%, \
1404 $(filter-out include, $(shell ls
-1 $d 2>/dev
/null
))))
1406 CLEAN_FILES
+= include/bmp_logo.h
include/bmp_logo_data.h \
1407 boot
* u-boot
* MLO
* SPL System.map
1409 # Directories & files removed with 'make mrproper'
1410 MRPROPER_DIRS
+= include/config
include/generated spl tpl \
1412 MRPROPER_FILES
+= .config .config.old
include/autoconf.mk
* include/config.h \
1413 ctags etags TAGS cscope
* GPATH GTAGS GRTAGS GSYMS
1415 # clean - Delete most, but leave enough to build external modules
1417 clean: rm-dirs
:= $(CLEAN_DIRS
)
1418 clean: rm-files
:= $(CLEAN_FILES
)
1420 clean-dirs
:= $(foreach f
,$(u-boot-alldirs
),$(if
$(wildcard $(srctree
)/$f/Makefile
),$f))
1422 clean-dirs
:= $(addprefix _clean_
, $(clean-dirs
) doc
/DocBook
)
1424 PHONY
+= $(clean-dirs
) clean archclean
1426 $(Q
)$(MAKE
) $(clean)=$(patsubst _clean_
%,%,$@
)
1428 # TODO: Do not use *.cfgtmp
1429 clean: $(clean-dirs
)
1432 @find
$(if
$(KBUILD_EXTMOD
), $(KBUILD_EXTMOD
), .
) $(RCS_FIND_IGNORE
) \
1433 \
( -name
'*.[oas]' -o
-name
'*.ko' -o
-name
'.*.cmd' \
1434 -o
-name
'*.ko.*' -o
-name
'*.su' -o
-name
'*.cfgtmp' \
1435 -o
-name
'.*.d' -o
-name
'.*.tmp' -o
-name
'*.mod.c' \
1436 -o
-name
'*.symtypes' -o
-name
'modules.order' \
1437 -o
-name modules.builtin
-o
-name
'.tmp_*.o.*' \
1438 -o
-name
'*.gcno' \
) -type f
-print | xargs
rm -f
1440 # mrproper - Delete all generated files, including .config
1442 mrproper
: rm-dirs
:= $(wildcard $(MRPROPER_DIRS
))
1443 mrproper
: rm-files
:= $(wildcard $(MRPROPER_FILES
))
1444 mrproper-dirs
:= $(addprefix _mrproper_
,scripts
)
1446 PHONY
+= $(mrproper-dirs
) mrproper archmrproper
1448 $(Q
)$(MAKE
) $(clean)=$(patsubst _mrproper_
%,%,$@
)
1450 mrproper
: clean $(mrproper-dirs
)
1453 @
rm -f arch
/*/include/asm
/arch
1460 @find
$(srctree
) $(RCS_FIND_IGNORE
) \
1461 \
( -name
'*.orig' -o
-name
'*.rej' -o
-name
'*~' \
1462 -o
-name
'*.bak' -o
-name
'#*#' -o
-name
'.*.orig' \
1463 -o
-name
'.*.rej' -o
-name
'*%' -o
-name
'core' \
1464 -o
-name
'*.pyc' \
) \
1465 -type f
-print | xargs
rm -f
1469 F
=`basename $(srctree)` ; cd ..
; \
1470 gtar
--force-local
-zcvf
`LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1473 @echo
'Cleaning targets:'
1474 @echo
' clean - Remove most generated files but keep the config'
1475 @echo
' mrproper - Remove all generated files + config + various backup files'
1476 @echo
' distclean - mrproper + remove editor backup and patch files'
1478 @echo
'Configuration targets:'
1479 @
$(MAKE
) -f
$(srctree
)/scripts
/kconfig
/Makefile help
1481 @echo
'Other generic targets:'
1482 @echo
' all - Build all necessary images depending on configuration'
1483 @echo
'* u-boot - Build the bare u-boot'
1484 @echo
' dir/ - Build all files in dir and below'
1485 @echo
' dir/file.[oisS] - Build specified target only'
1486 @echo
' dir/file.lst - Build specified mixed source/assembly target only'
1487 @echo
' (requires a recent binutils and recent build (System.map))'
1488 @echo
' tags/ctags - Generate ctags file for editors'
1489 @echo
' etags - Generate etags file for editors'
1490 @echo
' cscope - Generate cscope index'
1491 @echo
' ubootrelease - Output the release version string (use with make -s)'
1492 @echo
' ubootversion - Output the version stored in Makefile (use with make -s)'
1494 @echo
'Static analysers'
1495 @echo
' checkstack - Generate a list of stack hogs'
1497 @echo
'Documentation targets:'
1498 @
$(MAKE
) -f
$(srctree
)/doc
/DocBook
/Makefile dochelp
1500 @echo
' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1501 @echo
' make V=2 [targets] 2 => give reason for rebuild of target'
1502 @echo
' make O=dir [targets] Locate all output files in "dir", including .config'
1503 @echo
' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1504 @echo
' make C=2 [targets] Force check of all c source with $$CHECK'
1505 @echo
' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1506 @echo
' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1507 @echo
' 1: warnings which may be relevant and do not occur too often'
1508 @echo
' 2: warnings which occur quite often but may still be relevant'
1509 @echo
' 3: more obscure warnings, can most likely be ignored'
1510 @echo
' Multiple levels can be combined with W=12 or W=123'
1512 @echo
'Execute "make" or "make all" to build all targets marked with [*] '
1513 @echo
'For further info see the ./README file'
1516 # Documentation targets
1517 # ---------------------------------------------------------------------------
1518 %docs
: scripts_basic FORCE
1519 $(Q
)$(MAKE
) $(build
)=scripts build_docproc
1520 $(Q
)$(MAKE
) $(build
)=doc
/DocBook
$@
1523 PHONY
+= prepare scripts
1527 endif #ifeq ($(config-targets),1)
1528 endif #ifeq ($(mixed-targets),1)
1530 PHONY
+= checkstack ubootrelease ubootversion
1533 $(OBJDUMP
) -d u-boot
$$(find .
-name u-boot-spl
) | \
1534 $(PERL
) $(src
)/scripts
/checkstack.pl
$(ARCH
)
1537 @echo
"$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1540 @echo
$(UBOOTVERSION
)
1543 # ---------------------------------------------------------------------------
1544 # Single targets are compatible with:
1545 # - build with mixed source and output
1546 # - build with separate output dir 'make O=...'
1547 # - external modules
1549 # target-dir => where to store outputfile
1550 # build-dir => directory in kernel source tree to use
1552 ifeq ($(KBUILD_EXTMOD
),)
1553 build-dir
= $(patsubst %/,%,$(dir $@
))
1554 target-dir
= $(dir $@
)
1556 zap-slash
=$(filter-out .
,$(patsubst %/,%,$(dir $@
)))
1557 build-dir
= $(KBUILD_EXTMOD
)$(if
$(zap-slash
),/$(zap-slash
))
1558 target-dir
= $(if
$(KBUILD_EXTMOD
),$(dir $<),$(dir $@
))
1561 %.s
: %.c prepare scripts FORCE
1562 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1563 %.i
: %.c prepare scripts FORCE
1564 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1565 %.o
: %.c prepare scripts FORCE
1566 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1567 %.lst
: %.c prepare scripts FORCE
1568 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1569 %.s
: %.S prepare scripts FORCE
1570 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1571 %.o
: %.S prepare scripts FORCE
1572 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1573 %.symtypes
: %.c prepare scripts FORCE
1574 $(Q
)$(MAKE
) $(build
)=$(build-dir
) $(target-dir
)$(notdir $@
)
1577 /: prepare scripts FORCE
1579 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1580 $(build
)=$(build-dir
)
1581 %/: prepare scripts FORCE
1583 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1584 $(build
)=$(build-dir
)
1585 %.ko
: prepare scripts FORCE
1587 $(Q
)$(MAKE
) KBUILD_MODULES
=$(if
$(CONFIG_MODULES
),1) \
1588 $(build
)=$(build-dir
) $(@
:.ko
=.o
)
1589 $(Q
)$(MAKE
) -f
$(srctree
)/scripts
/Makefile.modpost
1591 # FIXME Should go into a make.lib or something
1592 # ===========================================================================
1594 quiet_cmd_rmdirs
= $(if
$(wildcard $(rm-dirs
)),CLEAN
$(wildcard $(rm-dirs
)))
1595 cmd_rmdirs
= rm -rf
$(rm-dirs
)
1597 quiet_cmd_rmfiles
= $(if
$(wildcard $(rm-files
)),CLEAN
$(wildcard $(rm-files
)))
1598 cmd_rmfiles
= rm -f
$(rm-files
)
1600 # read all saved command lines
1602 targets
:= $(wildcard $(sort $(targets
)))
1603 cmd_files
:= $(wildcard .
*.cmd
$(foreach f
,$(targets
),$(dir $(f
)).
$(notdir $(f
)).cmd
))
1605 ifneq ($(cmd_files
),)
1606 $(cmd_files
): ; # Do not try to update included dependency files
1607 include $(cmd_files
)
1610 endif # skip-makefile
1615 # Declare the contents of the .PHONY variable as phony. We keep that
1616 # information in a variable so we can use it in if_changed and friends.