Makefile

   1 #
   2 # (C) Copyright 2000-2009
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # See file CREDITS for list of people who contributed to this
   6 # project.
   7 #
   8 # This program is free software; you can redistribute it and/or
   9 # modify it under the terms of the GNU General Public License as
  10 # published by the Free Software Foundatio; either version 2 of
  11 # the License, or (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 # GNU General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21 # MA 02111-1307 USA
  22 #
  23
  24 VERSION = 2009
  25 PATCHLEVEL = 11
  26 SUBLEVEL =
  27 EXTRAVERSION =
  28 ifneq "$(SUBLEVEL)" ""
  29 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
  30 else
  31 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
  32 endif
  33 TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
  34 VERSION_FILE = $(obj)include/version_autogenerated.h
  35
  36 HOSTARCH := $(shell uname -m | \
  37         sed -e s/i.86/i386/ \
  38             -e s/sun4u/sparc64/ \
  39             -e s/arm.*/arm/ \
  40             -e s/sa110/arm/ \
  41             -e s/powerpc/ppc/ \
  42             -e s/ppc64/ppc/ \
  43             -e s/macppc/ppc/)
  44
  45 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
  46             sed -e 's/\(cygwin\).*/cygwin/')
  47
  48 # Set shell to bash if possible, otherwise fall back to sh
  49 SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  50         else if [ -x /bin/bash ]; then echo /bin/bash; \
  51         else echo sh; fi; fi)
  52
  53 export  HOSTARCH HOSTOS SHELL
  54
  55 # Deal with colliding definitions from tcsh etc.
  56 VENDOR=
  57
  58 #########################################################################
  59 # Allow for silent builds
  60 ifeq (,$(findstring s,$(MAKEFLAGS)))
  61 XECHO = echo
  62 else
  63 XECHO = :
  64 endif
  65
  66 #########################################################################
  67 #
  68 # U-boot build supports producing a object files to the separate external
  69 # directory. Two use cases are supported:
  70 #
  71 # 1) Add O= to the make command line
  72 # 'make O=/tmp/build all'
  73 #
  74 # 2) Set environement variable BUILD_DIR to point to the desired location
  75 # 'export BUILD_DIR=/tmp/build'
  76 # 'make'
  77 #
  78 # The second approach can also be used with a MAKEALL script
  79 # 'export BUILD_DIR=/tmp/build'
  80 # './MAKEALL'
  81 #
  82 # Command line 'O=' setting overrides BUILD_DIR environent variable.
  83 #
  84 # When none of the above methods is used the local build is performed and
  85 # the object files are placed in the source directory.
  86 #
  87
  88 ifdef O
  89 ifeq ("$(origin O)", "command line")
  90 BUILD_DIR := $(O)
  91 endif
  92 endif
  93
  94 ifneq ($(BUILD_DIR),)
  95 saved-output := $(BUILD_DIR)
  96
  97 # Attempt to create a output directory.
  98 $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
  99
 100 # Verify if it was successful.
 101 BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
 102 $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
 103 endif # ifneq ($(BUILD_DIR),)
 104
 105 OBJTREE         := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
 106 SRCTREE         := $(CURDIR)
 107 TOPDIR          := $(SRCTREE)
 108 LNDIR           := $(OBJTREE)
 109 export  TOPDIR SRCTREE OBJTREE
 110
 111 MKCONFIG        := $(SRCTREE)/mkconfig
 112 export MKCONFIG
 113
 114 ifneq ($(OBJTREE),$(SRCTREE))
 115 REMOTE_BUILD    := 1
 116 export REMOTE_BUILD
 117 endif
 118
 119 # $(obj) and (src) are defined in config.mk but here in main Makefile
 120 # we also need them before config.mk is included which is the case for
 121 # some targets like unconfig, clean, clobber, distclean, etc.
 122 ifneq ($(OBJTREE),$(SRCTREE))
 123 obj := $(OBJTREE)/
 124 src := $(SRCTREE)/
 125 else
 126 obj :=
 127 src :=
 128 endif
 129 export obj src
 130
 131 # Make sure CDPATH settings don't interfere
 132 unexport CDPATH
 133
 134 #########################################################################
 135
 136 ifeq ($(ARCH),powerpc)
 137 ARCH = ppc
 138 endif
 139
 140 # The "tools" are needed early, so put this first
 141 # Don't include stuff already done in $(LIBS)
 142 SUBDIRS = tools \
 143           examples/standalone \
 144           examples/api
 145
 146 .PHONY : $(SUBDIRS)
 147
 148 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 149
 150 # Include autoconf.mk before config.mk so that the config options are available
 151 # to all top level build files.  We need the dummy all: target to prevent the
 152 # dependency target in autoconf.mk.dep from being the default.
 153 all:
 154 sinclude $(obj)include/autoconf.mk.dep
 155 sinclude $(obj)include/autoconf.mk
 156
 157 # load ARCH, BOARD, and CPU configuration
 158 include $(obj)include/config.mk
 159 export  ARCH CPU BOARD VENDOR SOC
 160
 161 # set default to nothing for native builds
 162 ifeq ($(HOSTARCH),$(ARCH))
 163 CROSS_COMPILE ?=
 164 endif
 165
 166 # load other configuration
 167 include $(TOPDIR)/config.mk
 168
 169 #########################################################################
 170 # U-Boot objects....order is important (i.e. start must be first)
 171
 172 OBJS  = cpu/$(CPU)/start.o
 173 ifeq ($(CPU),i386)
 174 OBJS += cpu/$(CPU)/start16.o
 175 OBJS += cpu/$(CPU)/resetvec.o
 176 endif
 177 ifeq ($(CPU),ppc4xx)
 178 OBJS += cpu/$(CPU)/resetvec.o
 179 endif
 180 ifeq ($(CPU),mpc85xx)
 181 OBJS += cpu/$(CPU)/resetvec.o
 182 endif
 183
 184 OBJS := $(addprefix $(obj),$(OBJS))
 185
 186 LIBS  = lib_generic/libgeneric.a
 187 LIBS += lib_generic/lzma/liblzma.a
 188 LIBS += lib_generic/lzo/liblzo.a
 189 LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
 190         "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 191 LIBS += cpu/$(CPU)/lib$(CPU).a
 192 ifdef SOC
 193 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 194 endif
 195 ifeq ($(CPU),ixp)
 196 LIBS += cpu/ixp/npe/libnpe.a
 197 endif
 198 LIBS += lib_$(ARCH)/lib$(ARCH).a
 199 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
 200         fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
 201         fs/ubifs/libubifs.a
 202 LIBS += net/libnet.a
 203 LIBS += disk/libdisk.a
 204 LIBS += drivers/bios_emulator/libatibiosemu.a
 205 LIBS += drivers/block/libblock.a
 206 LIBS += drivers/dma/libdma.a
 207 LIBS += drivers/fpga/libfpga.a
 208 LIBS += drivers/gpio/libgpio.a
 209 LIBS += drivers/hwmon/libhwmon.a
 210 LIBS += drivers/i2c/libi2c.a
 211 LIBS += drivers/input/libinput.a
 212 LIBS += drivers/misc/libmisc.a
 213 LIBS += drivers/mmc/libmmc.a
 214 LIBS += drivers/mtd/libmtd.a
 215 LIBS += drivers/mtd/nand/libnand.a
 216 LIBS += drivers/mtd/onenand/libonenand.a
 217 LIBS += drivers/mtd/ubi/libubi.a
 218 LIBS += drivers/mtd/spi/libspi_flash.a
 219 LIBS += drivers/net/libnet.a
 220 LIBS += drivers/net/phy/libphy.a
 221 LIBS += drivers/net/sk98lin/libsk98lin.a
 222 LIBS += drivers/pci/libpci.a
 223 LIBS += drivers/pcmcia/libpcmcia.a
 224 LIBS += drivers/power/libpower.a
 225 LIBS += drivers/spi/libspi.a
 226 ifeq ($(CPU),mpc83xx)
 227 LIBS += drivers/qe/qe.a
 228 endif
 229 ifeq ($(CPU),mpc85xx)
 230 LIBS += drivers/qe/qe.a
 231 LIBS += cpu/mpc8xxx/ddr/libddr.a
 232 LIBS += cpu/mpc8xxx/lib8xxx.a
 233 TAG_SUBDIRS += cpu/mpc8xxx
 234 endif
 235 ifeq ($(CPU),mpc86xx)
 236 LIBS += cpu/mpc8xxx/ddr/libddr.a
 237 LIBS += cpu/mpc8xxx/lib8xxx.a
 238 TAG_SUBDIRS += cpu/mpc8xxx
 239 endif
 240 LIBS += drivers/rtc/librtc.a
 241 LIBS += drivers/serial/libserial.a
 242 LIBS += drivers/twserial/libtws.a
 243 LIBS += drivers/usb/gadget/libusb_gadget.a
 244 LIBS += drivers/usb/host/libusb_host.a
 245 LIBS += drivers/usb/musb/libusb_musb.a
 246 LIBS += drivers/usb/phy/libusb_phy.a
 247 LIBS += drivers/video/libvideo.a
 248 LIBS += drivers/watchdog/libwatchdog.a
 249 LIBS += common/libcommon.a
 250 LIBS += libfdt/libfdt.a
 251 LIBS += api/libapi.a
 252 LIBS += post/libpost.a
 253
 254 LIBS := $(addprefix $(obj),$(LIBS))
 255 .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)
 256
 257 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
 258 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
 259
 260 # Add GCC lib
 261 ifdef USE_PRIVATE_LIBGCC
 262 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
 263 PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc
 264 else
 265 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
 266 endif
 267 else
 268 PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 269 endif
 270 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 271 export PLATFORM_LIBS
 272
 273 # Special flags for CPP when processing the linker script.
 274 # Pass the version down so we can handle backwards compatibility
 275 # on the fly.
 276 LDPPFLAGS += \
 277         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 278         $(shell $(LD) --version | \
 279           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 280
 281 ifeq ($(CONFIG_NAND_U_BOOT),y)
 282 NAND_SPL = nand_spl
 283 U_BOOT_NAND = $(obj)u-boot-nand.bin
 284 endif
 285
 286 ifeq ($(CONFIG_ONENAND_U_BOOT),y)
 287 ONENAND_IPL = onenand_ipl
 288 U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
 289 ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
 290 endif
 291
 292 __OBJS := $(subst $(obj),,$(OBJS))
 293 __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 294
 295 #########################################################################
 296 #########################################################################
 297
 298 # Always append ALL so that arch config.mk's can add custom ones
 299 ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
 300
 301 all:            $(ALL)
 302
 303 $(obj)u-boot.hex:       $(obj)u-boot
 304                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
 305
 306 $(obj)u-boot.srec:      $(obj)u-boot
 307                 $(OBJCOPY) -O srec $< $@
 308
 309 $(obj)u-boot.bin:       $(obj)u-boot
 310                 $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 311
 312 $(obj)u-boot.ldr:       $(obj)u-boot
 313                 $(obj)tools/envcrc --binary > $(obj)env-ldr.o
 314                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
 315
 316 $(obj)u-boot.ldr.hex:   $(obj)u-boot.ldr
 317                 $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
 318
 319 $(obj)u-boot.ldr.srec:  $(obj)u-boot.ldr
 320                 $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 321
 322 $(obj)u-boot.img:       $(obj)u-boot.bin
 323                 ./tools/mkimage -A $(ARCH) -T firmware -C none \
 324                 -a $(TEXT_BASE) -e 0 \
 325                 -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 326                         sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
 327                 -d $< $@
 328
 329 $(obj)u-boot.kwb:       $(obj)u-boot.bin
 330                 $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
 331                 -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
 332
 333 $(obj)u-boot.sha1:      $(obj)u-boot.bin
 334                 $(obj)tools/ubsha1 $(obj)u-boot.bin
 335
 336 $(obj)u-boot.dis:       $(obj)u-boot
 337                 $(OBJDUMP) -d $< > $@
 338
 339 GEN_UBOOT = \
 340                 UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
 341                 sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 342                 cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
 343                         --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 344                         -Map u-boot.map -o u-boot
 345 $(obj)u-boot:   depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 346                 $(GEN_UBOOT)
 347 ifeq ($(CONFIG_KALLSYMS),y)
 348                 smap=`$(call SYSTEM_MAP,u-boot) | \
 349                         awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 350                 $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
 351                         -c common/system_map.c -o $(obj)common/system_map.o
 352                 $(GEN_UBOOT) $(obj)common/system_map.o
 353 endif
 354
 355 $(OBJS):        depend
 356                 $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 357
 358 $(LIBS):        depend $(SUBDIRS)
 359                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 360
 361 $(LIBBOARD):    depend $(LIBS)
 362                 $(MAKE) -C $(dir $(subst $(obj),,$@))
 363
 364 $(SUBDIRS):     depend
 365                 $(MAKE) -C $@ all
 366
 367 $(LDSCRIPT):    depend
 368                 $(MAKE) -C $(dir $@) $(notdir $@)
 369
 370 $(obj)u-boot.lds: $(LDSCRIPT)
 371                 $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
 372
 373 $(NAND_SPL):    $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 374                 $(MAKE) -C nand_spl/board/$(BOARDDIR) all
 375
 376 $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
 377                 cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 378
 379 $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 380                 $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 381
 382 $(U_BOOT_ONENAND):      $(ONENAND_IPL) $(obj)u-boot.bin
 383                 cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
 384
 385 $(VERSION_FILE):
 386                 @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \
 387                  '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp
 388                 @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 389
 390 $(TIMESTAMP_FILE):
 391                 @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
 392                 @date +'#define U_BOOT_TIME "%T"' >> $@
 393
 394 gdbtools:
 395                 $(MAKE) -C tools/gdb all || exit 1
 396
 397 updater:
 398                 $(MAKE) -C tools/updater all || exit 1
 399
 400 env:
 401                 $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
 402
 403 depend dep:     $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk
 404                 for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 405
 406 TAG_SUBDIRS += include
 407 TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
 408 TAG_SUBDIRS += cpu/$(CPU)
 409 TAG_SUBDIRS += lib_$(ARCH)
 410 TAG_SUBDIRS += fs/cramfs
 411 TAG_SUBDIRS += fs/fat
 412 TAG_SUBDIRS += fs/fdos
 413 TAG_SUBDIRS += fs/jffs2
 414 TAG_SUBDIRS += fs/yaffs2
 415 TAG_SUBDIRS += net
 416 TAG_SUBDIRS += disk
 417 TAG_SUBDIRS += common
 418 TAG_SUBDIRS += drivers/bios_emulator
 419 TAG_SUBDIRS += drivers/block
 420 TAG_SUBDIRS += drivers/gpio
 421 TAG_SUBDIRS += drivers/hwmon
 422 TAG_SUBDIRS += drivers/i2c
 423 TAG_SUBDIRS += drivers/input
 424 TAG_SUBDIRS += drivers/misc
 425 TAG_SUBDIRS += drivers/mmc
 426 TAG_SUBDIRS += drivers/mtd
 427 TAG_SUBDIRS += drivers/mtd/nand
 428 TAG_SUBDIRS += drivers/mtd/onenand
 429 TAG_SUBDIRS += drivers/mtd/spi
 430 TAG_SUBDIRS += drivers/net
 431 TAG_SUBDIRS += drivers/net/sk98lin
 432 TAG_SUBDIRS += drivers/pci
 433 TAG_SUBDIRS += drivers/pcmcia
 434 TAG_SUBDIRS += drivers/qe
 435 TAG_SUBDIRS += drivers/rtc
 436 TAG_SUBDIRS += drivers/serial
 437 TAG_SUBDIRS += drivers/spi
 438 TAG_SUBDIRS += drivers/usb
 439 TAG_SUBDIRS += drivers/video
 440
 441 tags ctags:
 442                 ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
 443                                                 -name '*.[ch]' -print`
 444
 445 etags:
 446                 etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
 447                                                 -name '*.[ch]' -print`
 448 cscope:
 449                 find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \
 450                                                 > cscope.files
 451                 cscope -b -q -k
 452
 453 SYSTEM_MAP = \
 454                 $(NM) $1 | \
 455                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 456                 LC_ALL=C sort
 457 $(obj)System.map:       $(obj)u-boot
 458                 @$(call SYSTEM_MAP,$<) > $(obj)System.map
 459
 460 #
 461 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 462 #
 463 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 464 # the dep file is only include in this top level makefile to determine when
 465 # to regenerate the autoconf.mk file.
 466 $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
 467         @$(XECHO) Generating $@ ; \
 468         set -e ; \
 469         : Generate the dependancies ; \
 470         $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
 471                 -MQ $(obj)include/autoconf.mk include/common.h > $@
 472
 473 $(obj)include/autoconf.mk: $(obj)include/config.h
 474         @$(XECHO) Generating $@ ; \
 475         set -e ; \
 476         : Extract the config macros ; \
 477         $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
 478                 sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
 479         mv $@.tmp $@
 480
 481 #########################################################################
 482 else    # !config.mk
 483 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 484 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
 485 $(SUBDIRS) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools updater env depend \
 486 dep tags ctags etags cscope $(obj)System.map:
 487         @echo "System not configured - see README" >&2
 488         @ exit 1
 489 endif   # config.mk
 490
 491 .PHONY : CHANGELOG
 492 CHANGELOG:
 493         git log --no-merges U-Boot-1_1_5.. | \
 494         unexpand -a | sed -e 's/\s\s*$$//' > $@
 495
 496 include/license.h: tools/bin2header COPYING
 497          cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
 498 #########################################################################
 499
 500 unconfig:
 501         @rm -f $(obj)include/config.h $(obj)include/config.mk \
 502                 $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
 503                 $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 504
 505 %: %_config
 506         $(MAKE)
 507
 508 #========================================================================
 509 # PowerPC
 510 #========================================================================
 511
 512 #########################################################################
 513 ## MPC5xx Systems
 514 #########################################################################
 515
 516 canmb_config:   unconfig
 517         @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
 518
 519 cmi_mpc5xx_config:      unconfig
 520         @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
 521
 522 PATI_config:            unconfig
 523         @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
 524
 525 #########################################################################
 526 ## MPC5xxx Systems
 527 #########################################################################
 528
 529 aev_config: unconfig
 530         @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc
 531
 532 BC3450_config:  unconfig
 533         @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
 534
 535 cm5200_config:  unconfig
 536         @$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
 537
 538 cpci5200_config:  unconfig
 539         @$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
 540
 541 digsy_mtc_config \
 542 digsy_mtc_LOWBOOT_config        \
 543 digsy_mtc_RAMBOOT_config:       unconfig
 544         @mkdir -p $(obj)include
 545         @mkdir -p $(obj)board/digsy_mtc
 546         @ >$(obj)include/config.h
 547         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 548                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
 549                   echo "... with LOWBOOT configuration" ; \
 550                 }
 551         @[ -z "$(findstring RAMBOOT_,$@)" ] || \
 552                 { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
 553                   echo "... with RAMBOOT configuration" ; \
 554                 }
 555         @$(MKCONFIG) -a digsy_mtc  ppc mpc5xxx digsy_mtc
 556
 557 galaxy5200_LOWBOOT_config \
 558 galaxy5200_config:      unconfig
 559         @mkdir -p $(obj)include
 560         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 561         @$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200
 562
 563 hmi1001_config: unconfig
 564         @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 565
 566 Lite5200_config                         \
 567 Lite5200_LOWBOOT_config                 \
 568 Lite5200_LOWBOOT08_config               \
 569 icecube_5200_config                     \
 570 icecube_5200_LOWBOOT_config             \
 571 icecube_5200_LOWBOOT08_config           \
 572 icecube_5200_DDR_config                 \
 573 icecube_5200_DDR_LOWBOOT_config         \
 574 icecube_5200_DDR_LOWBOOT08_config       \
 575 icecube_5100_config:                    unconfig
 576         @mkdir -p $(obj)include
 577         @mkdir -p $(obj)board/icecube
 578         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 579                 { if [ "$(findstring DDR,$@)" ] ; \
 580                         then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 581                         else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 582                   fi ; \
 583                   $(XECHO) "... with LOWBOOT configuration" ; \
 584                 }
 585         @[ -z "$(findstring LOWBOOT08,$@)" ] || \
 586                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
 587                   echo "... with 8 MB flash only" ; \
 588                   $(XECHO) "... with LOWBOOT configuration" ; \
 589                 }
 590         @[ -z "$(findstring DDR,$@)" ] || \
 591                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 592                   $(XECHO) "... DDR memory revision" ; \
 593                 }
 594         @[ -z "$(findstring 5200,$@)" ] || \
 595                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 596                   $(XECHO) "... with MPC5200 processor" ; \
 597                 }
 598         @[ -z "$(findstring 5100,$@)" ] || \
 599                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 600                   $(XECHO) "... with MGT5100 processor" ; \
 601                 }
 602         @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 603
 604 jupiter_config: unconfig
 605         @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 606
 607 inka4x0_config: unconfig
 608         @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 609
 610 ipek01_config: unconfig
 611         @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01
 612
 613 lite5200b_config        \
 614 lite5200b_PM_config     \
 615 lite5200b_LOWBOOT_config:       unconfig
 616         @mkdir -p $(obj)include
 617         @mkdir -p $(obj)board/icecube
 618         @ echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h
 619         @ $(XECHO) "... DDR memory revision"
 620         @ echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h
 621         @ echo "#define CONFIG_LITE5200B"       >>$(obj)include/config.h
 622         @[ -z "$(findstring _PM_,$@)" ] || \
 623                 { echo "#define CONFIG_LITE5200B_PM"    >>$(obj)include/config.h ; \
 624                   $(XECHO) "... with power management (low-power mode) support" ; \
 625                 }
 626         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 627                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 628                   $(XECHO) "... with LOWBOOT configuration" ; \
 629                 }
 630         @ $(XECHO) "... with MPC5200B processor"
 631         @$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube
 632
 633 mcc200_config   \
 634 mcc200_SDRAM_config     \
 635 mcc200_highboot_config  \
 636 mcc200_COM12_config     \
 637 mcc200_COM12_SDRAM_config       \
 638 mcc200_COM12_highboot_config    \
 639 mcc200_COM12_highboot_SDRAM_config      \
 640 mcc200_highboot_SDRAM_config    \
 641 prs200_config   \
 642 prs200_DDR_config       \
 643 prs200_highboot_config  \
 644 prs200_highboot_DDR_config:     unconfig
 645         @mkdir -p $(obj)include
 646         @mkdir -p $(obj)board/mcc200
 647         @[ -n "$(findstring highboot,$@)" ] || \
 648                 { $(XECHO) "... with lowboot configuration" ; \
 649                 }
 650         @[ -z "$(findstring highboot,$@)" ] || \
 651                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
 652                   $(XECHO) "... with highboot configuration" ; \
 653                 }
 654         @[ -n "$(findstring _SDRAM,$@)" ] || \
 655                 { if [ -n "$(findstring mcc200,$@)" ]; \
 656                   then \
 657                         $(XECHO) "... with DDR" ; \
 658                   else \
 659                         if [ -n "$(findstring _DDR,$@)" ];\
 660                         then \
 661                                 $(XECHO) "... with DDR" ; \
 662                         else \
 663                                 echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
 664                                 $(XECHO) "... with SDRAM" ; \
 665                         fi; \
 666                   fi; \
 667                 }
 668         @[ -z "$(findstring _SDRAM,$@)" ] || \
 669                 { echo "#define CONFIG_MCC200_SDRAM"    >>$(obj)include/config.h ; \
 670                   $(XECHO) "... with SDRAM" ; \
 671                 }
 672         @[ -z "$(findstring COM12,$@)" ] || \
 673                 { echo "#define CONFIG_CONSOLE_COM12"   >>$(obj)include/config.h ; \
 674                   $(XECHO) "... with console on COM12" ; \
 675                 }
 676         @[ -z "$(findstring prs200,$@)" ] || \
 677                 { echo "#define CONFIG_PRS200"  >>$(obj)include/config.h ;\
 678                 }
 679         @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
 680
 681 mecp5200_config:  unconfig
 682         @$(MKCONFIG) mecp5200  ppc mpc5xxx mecp5200 esd
 683
 684 motionpro_config:       unconfig
 685         @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
 686
 687 mucmc52_config:         unconfig
 688         @$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52
 689
 690 munices_config: unconfig
 691         @$(MKCONFIG) munices ppc mpc5xxx munices
 692
 693 MVBC_P_config: unconfig
 694         @mkdir -p $(obj)include
 695         @mkdir -p $(obj)board/mvbc_p
 696         @ >$(obj)include/config.h
 697         @[ -z "$(findstring MVBC_P,$@)" ] || \
 698         {       echo "#define CONFIG_MVBC_P"    >>$(obj)include/config.h; }
 699         @$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision
 700
 701 o2dnt_config:   unconfig
 702         @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
 703
 704 pcm030_config \
 705 pcm030_LOWBOOT_config:  unconfig
 706         @mkdir -p $(obj)include $(obj)board/phytec/pcm030
 707         @ >$(obj)include/config.h
 708         @[ -z "$(findstring LOWBOOT_,$@)" ] || \
 709                 { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
 710                   echo "... with LOWBOOT configuration" ; \
 711                 }
 712         @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
 713
 714 pf5200_config:  unconfig
 715         @$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd
 716
 717 PM520_config \
 718 PM520_DDR_config \
 719 PM520_ROMBOOT_config \
 720 PM520_ROMBOOT_DDR_config:       unconfig
 721         @mkdir -p $(obj)include
 722         @[ -z "$(findstring DDR,$@)" ] || \
 723                 { echo "#define CONFIG_MPC5200_DDR"     >>$(obj)include/config.h ; \
 724                   $(XECHO) "... DDR memory revision" ; \
 725                 }
 726         @[ -z "$(findstring ROMBOOT,$@)" ] || \
 727                 { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
 728                   $(XECHO) "... booting from 8-bit flash" ; \
 729                 }
 730         @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
 731
 732 smmaco4_config: unconfig
 733         @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc
 734
 735 spieval_config: unconfig
 736         @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc
 737
 738 TB5200_B_config \
 739 TB5200_config:  unconfig
 740         @mkdir -p $(obj)include
 741         @[ -z "$(findstring _B,$@)" ] || \
 742                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 743                   $(XECHO) "... with MPC5200B processor" ; \
 744                 }
 745         @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc
 746
 747 MINI5200_config \
 748 EVAL5200_config \
 749 TOP5200_config: unconfig
 750         @mkdir -p $(obj)include
 751         @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
 752         @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
 753
 754 Total5100_config                \
 755 Total5200_config                \
 756 Total5200_lowboot_config        \
 757 Total5200_Rev2_config           \
 758 Total5200_Rev2_lowboot_config:  unconfig
 759         @mkdir -p $(obj)include
 760         @mkdir -p $(obj)board/total5200
 761         @[ -z "$(findstring 5100,$@)" ] || \
 762                 { echo "#define CONFIG_MGT5100"         >>$(obj)include/config.h ; \
 763                   $(XECHO) "... with MGT5100 processor" ; \
 764                 }
 765         @[ -z "$(findstring 5200,$@)" ] || \
 766                 { echo "#define CONFIG_MPC5200"         >>$(obj)include/config.h ; \
 767                   $(XECHO) "... with MPC5200 processor" ; \
 768                 }
 769         @[ -n "$(findstring Rev,$@)" ] || \
 770                 { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
 771                   $(XECHO) "... revision 1 board" ; \
 772                 }
 773         @[ -z "$(findstring Rev2_,$@)" ] || \
 774                 { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
 775                   $(XECHO) "... revision 2 board" ; \
 776                 }
 777         @[ -z "$(findstring lowboot_,$@)" ] || \
 778                 { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
 779                   $(XECHO) "... with lowboot configuration" ; \
 780                 }
 781         @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
 782
 783 cam5200_config \
 784 cam5200_niosflash_config \
 785 fo300_config \
 786 MiniFAP_config \
 787 TQM5200S_config \
 788 TQM5200S_HIGHBOOT_config \
 789 TQM5200_B_config \
 790 TQM5200_B_HIGHBOOT_config \
 791 TQM5200_config  \
 792 TQM5200_STK100_config:  unconfig
 793         @mkdir -p $(obj)include
 794         @mkdir -p $(obj)board/tqc/tqm5200
 795         @[ -z "$(findstring cam5200,$@)" ] || \
 796                 { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
 797                   echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 798                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 799                   $(XECHO) "... TQM5200S on Cam5200" ; \
 800                 }
 801         @[ -z "$(findstring niosflash,$@)" ] || \
 802                 { echo "#define CONFIG_CAM5200_NIOSFLASH"       >>$(obj)include/config.h ; \
 803                   $(XECHO) "... with NIOS flash driver" ; \
 804                 }
 805         @[ -z "$(findstring fo300,$@)" ] || \
 806                 { echo "#define CONFIG_FO300"   >>$(obj)include/config.h ; \
 807                   $(XECHO) "... TQM5200 on FO300" ; \
 808                 }
 809         @[ -z "$(findstring MiniFAP,$@)" ] || \
 810                 { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
 811                   $(XECHO) "... TQM5200_AC on MiniFAP" ; \
 812                 }
 813         @[ -z "$(findstring STK100,$@)" ] || \
 814                 { echo "#define CONFIG_STK52XX_REV100"  >>$(obj)include/config.h ; \
 815                   $(XECHO) "... on a STK52XX.100 base board" ; \
 816                 }
 817         @[ -z "$(findstring TQM5200_B,$@)" ] || \
 818                 { echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 819                 }
 820         @[ -z "$(findstring TQM5200S,$@)" ] || \
 821                 { echo "#define CONFIG_TQM5200S"        >>$(obj)include/config.h ; \
 822                   echo "#define CONFIG_TQM5200_B"       >>$(obj)include/config.h ; \
 823                 }
 824         @[ -z "$(findstring HIGHBOOT,$@)" ] || \
 825                 { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
 826                 }
 827         @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc
 828
 829 uc101_config:           unconfig
 830         @$(MKCONFIG) uc101 ppc mpc5xxx uc101
 831
 832 v38b_config: unconfig
 833         @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 834
 835 #########################################################################
 836 ## MPC512x Systems
 837 #########################################################################
 838
 839 aria_config:    unconfig
 840         @$(MKCONFIG) -a aria ppc mpc512x aria davedenx
 841
 842 mecp5123_config:        unconfig
 843         @$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd
 844
 845 mpc5121ads_config \
 846 mpc5121ads_rev2_config  \
 847         : unconfig
 848         @mkdir -p $(obj)include
 849         @if [ "$(findstring rev2,$@)" ] ; then \
 850                 echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 851         fi
 852         @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale
 853
 854 #########################################################################
 855 ## MPC8xx Systems
 856 #########################################################################
 857
 858 Adder_config    \
 859 Adder87x_config \
 860 AdderII_config  \
 861         :               unconfig
 862         @mkdir -p $(obj)include
 863         $(if $(findstring AdderII,$@), \
 864         @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
 865         @$(MKCONFIG) -a Adder ppc mpc8xx adder
 866
 867 AdderUSB_config:        unconfig
 868         @$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
 869
 870 ADS860_config     \
 871 FADS823_config    \
 872 FADS850SAR_config \
 873 MPC86xADS_config  \
 874 MPC885ADS_config  \
 875 FADS860T_config:        unconfig
 876         @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
 877
 878 AMX860_config   :       unconfig
 879         @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
 880
 881 c2mon_config:           unconfig
 882         @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
 883
 884 CCM_config:             unconfig
 885         @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
 886
 887 cogent_mpc8xx_config:   unconfig
 888         @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
 889
 890 ELPT860_config:         unconfig
 891         @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
 892
 893 EP88x_config:           unconfig
 894         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
 895
 896 ESTEEM192E_config:      unconfig
 897         @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
 898
 899 ETX094_config   :       unconfig
 900         @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
 901
 902 FLAGADM_config: unconfig
 903         @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
 904
 905 xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
 906
 907 GEN860T_SC_config       \
 908 GEN860T_config: unconfig
 909         @mkdir -p $(obj)include
 910         @[ -z "$(findstring _SC,$@)" ] || \
 911                 { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
 912                   $(XECHO) "With reduced H/W feature set (SC)..." ; \
 913                 }
 914         @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
 915
 916 GENIETV_config: unconfig
 917         @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
 918
 919 GTH_config:     unconfig
 920         @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
 921
 922 hermes_config   :       unconfig
 923         @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
 924
 925 HMI10_config    :       unconfig
 926         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
 927
 928 IAD210_config: unconfig
 929         @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
 930
 931 xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
 932
 933 ICU862_100MHz_config    \
 934 ICU862_config: unconfig
 935         @mkdir -p $(obj)include
 936         @[ -z "$(findstring _100MHz,$@)" ] || \
 937                 { echo "#define CONFIG_100MHz"  >>$(obj)include/config.h ; \
 938                   $(XECHO) "... with 100MHz system clock" ; \
 939                 }
 940         @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
 941
 942 IP860_config    :       unconfig
 943         @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
 944
 945 IVML24_256_config \
 946 IVML24_128_config \
 947 IVML24_config:  unconfig
 948         @mkdir -p $(obj)include
 949         @[ -z "$(findstring IVML24_config,$@)" ] || \
 950                  { echo "#define CONFIG_IVML24_16M"     >>$(obj)include/config.h ; \
 951                  }
 952         @[ -z "$(findstring IVML24_128_config,$@)" ] || \
 953                  { echo "#define CONFIG_IVML24_32M"     >>$(obj)include/config.h ; \
 954                  }
 955         @[ -z "$(findstring IVML24_256_config,$@)" ] || \
 956                  { echo "#define CONFIG_IVML24_64M"     >>$(obj)include/config.h ; \
 957                  }
 958         @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
 959
 960 IVMS8_256_config \
 961 IVMS8_128_config \
 962 IVMS8_config:   unconfig
 963         @mkdir -p $(obj)include
 964         @[ -z "$(findstring IVMS8_config,$@)" ] || \
 965                  { echo "#define CONFIG_IVMS8_16M"      >>$(obj)include/config.h ; \
 966                  }
 967         @[ -z "$(findstring IVMS8_128_config,$@)" ] || \
 968                  { echo "#define CONFIG_IVMS8_32M"      >>$(obj)include/config.h ; \
 969                  }
 970         @[ -z "$(findstring IVMS8_256_config,$@)" ] || \
 971                  { echo "#define CONFIG_IVMS8_64M"      >>$(obj)include/config.h ; \
 972                  }
 973         @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
 974
 975 kmsupx4_config:         unconfig
 976         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 977
 978 KUP4K_config    :       unconfig
 979         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
 980
 981 KUP4X_config    :       unconfig
 982         @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
 983
 984 LANTEC_config   :       unconfig
 985         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
 986
 987 lwmon_config:           unconfig
 988         @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
 989
 990 MBX_config      \
 991 MBX860T_config: unconfig
 992         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
 993
 994 mgsuvd_config:          unconfig
 995         @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
 996
 997 MHPC_config:            unconfig
 998         @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
 999
1000 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
1001
1002 NETVIA_V2_config \
1003 NETVIA_config:          unconfig
1004         @mkdir -p $(obj)include
1005         @[ -z "$(findstring NETVIA_config,$@)" ] || \
1006                  { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
1007                   $(XECHO) "... Version 1" ; \
1008                  }
1009         @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
1010                  { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
1011                   $(XECHO) "... Version 2" ; \
1012                  }
1013         @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
1014
1015 xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
1016
1017 NETPHONE_V2_config \
1018 NETPHONE_config:        unconfig
1019         @mkdir -p $(obj)include
1020         @[ -z "$(findstring NETPHONE_config,$@)" ] || \
1021                  { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
1022                  }
1023         @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
1024                  { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
1025                  }
1026         @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
1027
1028 xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
1029
1030 NETTA_ISDN_6412_SWAPHOOK_config \
1031 NETTA_ISDN_SWAPHOOK_config \
1032 NETTA_6412_SWAPHOOK_config \
1033 NETTA_SWAPHOOK_config \
1034 NETTA_ISDN_6412_config \
1035 NETTA_ISDN_config \
1036 NETTA_6412_config \
1037 NETTA_config:           unconfig
1038         @mkdir -p $(obj)include
1039         @[ -z "$(findstring ISDN_,$@)" ] || \
1040                  { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
1041                  }
1042         @[ -n "$(findstring ISDN_,$@)" ] || \
1043                  { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
1044                  }
1045         @[ -z "$(findstring 6412_,$@)" ] || \
1046                  { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
1047                  }
1048         @[ -n "$(findstring 6412_,$@)" ] || \
1049                  { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
1050                  }
1051         @[ -z "$(findstring SWAPHOOK_,$@)" ] || \
1052                  { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
1053                  }
1054         @[ -n "$(findstring SWAPHOOK_,$@)" ] || \
1055                  { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
1056                  }
1057         @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
1058
1059 xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
1060
1061 NETTA2_V2_config \
1062 NETTA2_config:          unconfig
1063         @mkdir -p $(obj)include
1064         @[ -z "$(findstring NETTA2_config,$@)" ] || \
1065                  { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
1066                  }
1067         @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
1068                  { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
1069                  }
1070         @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
1071
1072 NC650_Rev1_config \
1073 NC650_Rev2_config \
1074 CP850_config:   unconfig
1075         @mkdir -p $(obj)include
1076         @[ -z "$(findstring CP850,$@)" ] || \
1077                  { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
1078                    echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1079                  }
1080         @[ -z "$(findstring Rev1,$@)" ] || \
1081                  { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
1082                  }
1083         @[ -z "$(findstring Rev2,$@)" ] || \
1084                  { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
1085                  }
1086         @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
1087
1088 NX823_config:           unconfig
1089         @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
1090
1091 pcu_e_config:           unconfig
1092         @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
1093
1094 QS850_config:   unconfig
1095         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1096
1097 QS823_config:   unconfig
1098         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
1099
1100 QS860T_config:  unconfig
1101         @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
1102
1103 quantum_config: unconfig
1104         @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
1105
1106 R360MPI_config: unconfig
1107         @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
1108
1109 RBC823_config:  unconfig
1110         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
1111
1112 RPXClassic_config:      unconfig
1113         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
1114
1115 RPXlite_config:         unconfig
1116         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
1117
1118 RPXlite_DW_64_config            \
1119 RPXlite_DW_LCD_config           \
1120 RPXlite_DW_64_LCD_config        \
1121 RPXlite_DW_NVRAM_config         \
1122 RPXlite_DW_NVRAM_64_config      \
1123 RPXlite_DW_NVRAM_LCD_config     \
1124 RPXlite_DW_NVRAM_64_LCD_config  \
1125 RPXlite_DW_config:      unconfig
1126         @mkdir -p $(obj)include
1127         @[ -z "$(findstring _64,$@)" ] || \
1128                 { echo "#define RPXlite_64MHz"          >>$(obj)include/config.h ; \
1129                   $(XECHO) "... with 64MHz system clock ..."; \
1130                 }
1131         @[ -z "$(findstring _LCD,$@)" ] || \
1132                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1133                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1134                   $(XECHO) "... with LCD display ..."; \
1135                 }
1136         @[ -z "$(findstring _NVRAM,$@)" ] || \
1137                 { echo "#define  CONFIG_ENV_IS_IN_NVRAM"        >>$(obj)include/config.h ; \
1138                   $(XECHO) "... with ENV in NVRAM ..."; \
1139                 }
1140         @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
1141
1142 rmu_config:     unconfig
1143         @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
1144
1145 RRvision_config:        unconfig
1146         @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
1147
1148 RRvision_LCD_config:    unconfig
1149         @mkdir -p $(obj)include
1150         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1151         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1152         @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
1153
1154 SM850_config    :       unconfig
1155         @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc
1156
1157 spc1920_config:         unconfig
1158         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
1159
1160 SPD823TS_config:        unconfig
1161         @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
1162
1163 stxxtc_config:  unconfig
1164         @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc stx
1165
1166 svm_sc8xx_config:       unconfig
1167         @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
1168
1169 SXNI855T_config:        unconfig
1170         @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
1171
1172 # EMK MPC8xx based modules
1173 TOP860_config:          unconfig
1174         @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
1175
1176 # Play some tricks for configuration selection
1177 # Only 855 and 860 boards may come with FEC
1178 # and only 823 boards may have LCD support
1179 xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
1180
1181 FPS850L_config          \
1182 FPS860L_config          \
1183 NSCU_config             \
1184 TQM823L_config          \
1185 TQM823L_LCD_config      \
1186 TQM850L_config          \
1187 TQM855L_config          \
1188 TQM860L_config          \
1189 TQM862L_config          \
1190 TQM823M_config          \
1191 TQM850M_config          \
1192 TQM855M_config          \
1193 TQM860M_config          \
1194 TQM862M_config          \
1195 TQM866M_config          \
1196 TQM885D_config          \
1197 TK885D_config           \
1198 virtlab2_config:        unconfig
1199         @mkdir -p $(obj)include
1200         @[ -z "$(findstring _LCD,$@)" ] || \
1201                 { echo "#define CONFIG_LCD"             >>$(obj)include/config.h ; \
1202                   echo "#define CONFIG_NEC_NL6448BC20"  >>$(obj)include/config.h ; \
1203                   $(XECHO) "... with LCD display" ; \
1204                 }
1205         @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx tqc
1206
1207 TTTech_config:  unconfig
1208         @mkdir -p $(obj)include
1209         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1210         @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
1211         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1212
1213 uc100_config    :       unconfig
1214         @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
1215
1216 v37_config:     unconfig
1217         @mkdir -p $(obj)include
1218         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1219         @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
1220         @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
1221
1222 wtk_config:     unconfig
1223         @mkdir -p $(obj)include
1224         @echo "#define CONFIG_LCD" >$(obj)include/config.h
1225         @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
1226         @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx tqc
1227
1228 #########################################################################
1229 ## PPC4xx Systems
1230 #########################################################################
1231 xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
1232
1233 acadia_config:  unconfig
1234         @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
1235
1236 acadia_nand_config:     unconfig
1237         @mkdir -p $(obj)include $(obj)board/amcc/acadia
1238         @mkdir -p $(obj)nand_spl/board/amcc/acadia
1239         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1240         @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
1241         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
1242         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1243
1244 ADCIOP_config:  unconfig
1245         @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
1246
1247 alpr_config:    unconfig
1248         @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
1249
1250 AP1000_config:unconfig
1251         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
1252
1253 APC405_config:  unconfig
1254         @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
1255
1256 AR405_config:   unconfig
1257         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
1258
1259 ASH405_config:  unconfig
1260         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
1261
1262 bamboo_config:  unconfig
1263         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
1264
1265 bamboo_nand_config:     unconfig
1266         @mkdir -p $(obj)include $(obj)board/amcc/bamboo
1267         @mkdir -p $(obj)nand_spl/board/amcc/bamboo
1268         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1269         @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
1270         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
1271         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1272
1273 bubinga_config: unconfig
1274         @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
1275
1276 CANBT_config:   unconfig
1277         @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
1278
1279 # Arches, Canyonlands & Glacier use different U-Boot images
1280 arches_config \
1281 canyonlands_config \
1282 glacier_config: unconfig
1283         @mkdir -p $(obj)include
1284         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1285                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1286         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1287
1288 canyonlands_nand_config \
1289 glacier_nand_config:    unconfig
1290         @mkdir -p $(obj)include $(obj)board/amcc/canyonlands
1291         @mkdir -p $(obj)nand_spl/board/amcc/canyonlands
1292         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1293         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
1294                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1295         @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
1296         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
1297         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1298
1299 CATcenter_config        \
1300 CATcenter_25_config     \
1301 CATcenter_33_config:    unconfig
1302         @mkdir -p $(obj)include
1303         @ echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
1304         @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
1305         @[ -z "$(findstring _25,$@)" ] || \
1306                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
1307                   $(XECHO) "SysClk = 25MHz" ; \
1308                 }
1309         @[ -z "$(findstring _33,$@)" ] || \
1310                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
1311                   $(XECHO) "SysClk = 33MHz" ; \
1312                 }
1313         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1314
1315 CMS700_config:  unconfig
1316         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
1317
1318 CPCI2DP_config: unconfig
1319         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
1320
1321 CPCI405_config          \
1322 CPCI4052_config         \
1323 CPCI405DT_config        \
1324 CPCI405AB_config:       unconfig
1325         @mkdir -p $(obj)board/esd/cpci405
1326         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
1327
1328 CPCIISER4_config:       unconfig
1329         @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
1330
1331 CRAYL1_config:  unconfig
1332         @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
1333
1334 csb272_config:  unconfig
1335         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
1336
1337 csb472_config:  unconfig
1338         @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
1339
1340 DASA_SIM_config: unconfig
1341         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
1342
1343 dlvision_config: unconfig
1344         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
1345
1346 DP405_config:   unconfig
1347         @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
1348
1349 DU405_config:   unconfig
1350         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
1351
1352 DU440_config:   unconfig
1353         @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
1354
1355 ebony_config:   unconfig
1356         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
1357
1358 ERIC_config:    unconfig
1359         @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
1360
1361 EXBITGEN_config:        unconfig
1362         @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
1363
1364 fx12mm_flash_config: unconfig
1365         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1366         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1367         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1368                 > $(obj)board/avnet/fx12mm/config.tmp
1369         @echo "TEXT_BASE := 0xFFCB0000" \
1370                 >> $(obj)board/avnet/fx12mm/config.tmp
1371         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1372
1373 fx12mm_config: unconfig
1374         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1375         @mkdir -p $(obj)include $(obj)board/avnet/fx12mm
1376         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1377                 > $(obj)board/avnet/fx12mm/config.tmp
1378         @echo "TEXT_BASE := 0x03000000" \
1379                 >> $(obj)board/avnet/fx12mm/config.tmp
1380         @$(MKCONFIG) fx12mm ppc ppc4xx fx12mm avnet
1381
1382 G2000_config:   unconfig
1383         @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
1384
1385 gdppc440etx_config:     unconfig
1386         @$(MKCONFIG) $(@:_config=) ppc ppc4xx gdppc440etx gdsys
1387
1388 hcu4_config:    unconfig
1389         @mkdir -p $(obj)board/netstal/common
1390         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
1391
1392 hcu5_config:    unconfig
1393         @mkdir -p $(obj)board/netstal/common
1394         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
1395
1396 HH405_config:   unconfig
1397         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
1398
1399 HUB405_config:  unconfig
1400         @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
1401
1402 # Compact-Center(codename intip) & DevCon-Center use different U-Boot images
1403 intip_config \
1404 devconcenter_config:    unconfig
1405         @mkdir -p $(obj)include
1406         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1407                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1408         @$(MKCONFIG) -n $@ -a intip ppc ppc4xx intip gdsys
1409
1410 JSE_config:     unconfig
1411         @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
1412
1413 KAREF_config: unconfig
1414         @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
1415
1416 katmai_config:  unconfig
1417         @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
1418
1419 # Kilauea & Haleakala images are identical (recognized via PVR)
1420 kilauea_config \
1421 haleakala_config: unconfig
1422         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1423
1424 kilauea_nand_config \
1425 haleakala_nand_config: unconfig
1426         @mkdir -p $(obj)include $(obj)board/amcc/kilauea
1427         @mkdir -p $(obj)nand_spl/board/amcc/kilauea
1428         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1429         @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
1430         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
1431         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1432
1433 korat_config:   unconfig
1434         @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
1435
1436 luan_config:    unconfig
1437         @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
1438
1439 lwmon5_config:  unconfig
1440         @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
1441
1442 makalu_config:  unconfig
1443         @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
1444
1445 mcu25_config:  unconfig
1446         @mkdir -p $(obj)board/netstal/common
1447         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
1448
1449 METROBOX_config: unconfig
1450         @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
1451
1452 MIP405_config:  unconfig
1453         @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
1454
1455 MIP405T_config: unconfig
1456         @mkdir -p $(obj)include
1457         @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
1458         @$(XECHO) "Enable subset config for MIP405T"
1459         @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
1460
1461 ML2_config:     unconfig
1462         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
1463
1464 ml300_config:   unconfig
1465         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
1466
1467 ml507_flash_config: unconfig
1468         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1469         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1470         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1471                 > $(obj)board/xilinx/ml507/config.tmp
1472         @echo "TEXT_BASE := 0xFE360000" \
1473                 >> $(obj)board/xilinx/ml507/config.tmp
1474         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1475
1476 ml507_config: unconfig
1477         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1478         @mkdir -p $(obj)include $(obj)board/xilinx/ml507
1479         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1480                 > $(obj)board/xilinx/ml507/config.tmp
1481         @echo "TEXT_BASE := 0x04000000"  \
1482                 >> $(obj)board/xilinx/ml507/config.tmp
1483         @$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
1484
1485 neo_config:     unconfig
1486         @$(MKCONFIG) $(@:_config=) ppc ppc4xx neo gdsys
1487
1488 ocotea_config:  unconfig
1489         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
1490
1491 OCRTC_config            \
1492 ORSG_config:    unconfig
1493         @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
1494
1495 p3p440_config:  unconfig
1496         @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
1497
1498 PCI405_config:  unconfig
1499         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
1500
1501 pcs440ep_config:        unconfig
1502         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
1503
1504 PIP405_config:  unconfig
1505         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
1506
1507 PLU405_config:  unconfig
1508         @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
1509
1510 PMC405_config:  unconfig
1511         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
1512
1513 PMC405DE_config:        unconfig
1514         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
1515
1516 PMC440_config:  unconfig
1517         @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
1518
1519 PPChameleonEVB_config           \
1520 PPChameleonEVB_BA_25_config     \
1521 PPChameleonEVB_ME_25_config     \
1522 PPChameleonEVB_HI_25_config     \
1523 PPChameleonEVB_BA_33_config     \
1524 PPChameleonEVB_ME_33_config     \
1525 PPChameleonEVB_HI_33_config:    unconfig
1526         @mkdir -p $(obj)include
1527         @[ -z "$(findstring EVB_BA,$@)" ] || \
1528                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
1529                   $(XECHO) "... BASIC model" ; \
1530                 }
1531         @[ -z "$(findstring EVB_ME,$@)" ] || \
1532                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
1533                   $(XECHO) "... MEDIUM model" ; \
1534                 }
1535         @[ -z "$(findstring EVB_HI,$@)" ] || \
1536                 { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
1537                   $(XECHO) "... HIGH-END model" ; \
1538                 }
1539         @[ -z "$(findstring _25,$@)" ] || \
1540                 { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
1541                   $(XECHO) "SysClk = 25MHz" ; \
1542                 }
1543         @[ -z "$(findstring _33,$@)" ] || \
1544                 { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
1545                   $(XECHO) "SysClk = 33MHz" ; \
1546                 }
1547         @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
1548
1549 quad100hd_config:       unconfig
1550         @$(MKCONFIG) $(@:_config=) ppc ppc4xx quad100hd
1551
1552 redwood_config: unconfig
1553         @$(MKCONFIG) $(@:_config=) ppc ppc4xx redwood amcc
1554
1555 sbc405_config:  unconfig
1556         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
1557
1558 sc3_config:unconfig
1559         @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
1560
1561 sequoia_config \
1562 rainier_config: unconfig
1563         @mkdir -p $(obj)include
1564         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1565                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1566         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1567
1568 sequoia_nand_config \
1569 rainier_nand_config: unconfig
1570         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1571         @mkdir -p $(obj)nand_spl/board/amcc/sequoia
1572         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
1573         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1574                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1575         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1576         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1577         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
1578
1579 sequoia_ramboot_config \
1580 rainier_ramboot_config: unconfig
1581         @mkdir -p $(obj)include $(obj)board/amcc/sequoia
1582         @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
1583         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1584                 tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
1585         @$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
1586         @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
1587         @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
1588                 $(obj)board/amcc/sequoia/config.tmp
1589
1590 taihu_config:   unconfig
1591         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
1592
1593 taishan_config: unconfig
1594         @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
1595
1596 v5fx30teval_config: unconfig
1597         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1598         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1599         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1600                 > $(obj)board/avnet/v5fx30teval/config.tmp
1601         @echo "TEXT_BASE := 0x03000000" \
1602                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1603         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1604
1605 v5fx30teval_flash_config: unconfig
1606         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1607         @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
1608         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1609                 > $(obj)board/avnet/v5fx30teval/config.tmp
1610         @echo "TEXT_BASE := 0xFF1C0000" \
1611                 >> $(obj)board/avnet/v5fx30teval/config.tmp
1612         @$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
1613
1614 VOH405_config:  unconfig
1615         @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
1616
1617 VOM405_config:  unconfig
1618         @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
1619
1620 W7OLMC_config   \
1621 W7OLMG_config: unconfig
1622         @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
1623
1624 # Walnut & Sycamore images are identical (recognized via PVR)
1625 walnut_config \
1626 sycamore_config: unconfig
1627         @$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
1628
1629 WUH405_config:  unconfig
1630         @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
1631
1632 xilinx-ppc405-generic_flash_config: unconfig
1633         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1634         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
1635                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1636         @echo "TEXT_BASE := 0xFE360000" \
1637                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1638         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1639
1640 xilinx-ppc405-generic_config: unconfig
1641         @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
1642         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
1643                 > $(obj)board/xilinx/ppc405-generic/config.tmp
1644         @echo "TEXT_BASE := 0x04000000" \
1645                 >> $(obj)board/xilinx/ppc405-generic/config.tmp
1646         @$(MKCONFIG) xilinx-ppc405-generic ppc ppc4xx ppc405-generic xilinx
1647
1648 xilinx-ppc440-generic_flash_config: unconfig
1649         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1650         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
1651                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1652         @echo "TEXT_BASE := 0xFE360000" \
1653                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1654         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1655
1656 xilinx-ppc440-generic_config: unconfig
1657         @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
1658         @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
1659                 > $(obj)board/xilinx/ppc440-generic/config.tmp
1660         @echo "TEXT_BASE := 0x04000000" \
1661                 >> $(obj)board/xilinx/ppc440-generic/config.tmp
1662         @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
1663
1664 XPEDITE1000_config:     unconfig
1665         @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
1666
1667 yosemite_config \
1668 yellowstone_config: unconfig
1669         @mkdir -p $(obj)include
1670         @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
1671                 tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
1672         @$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
1673
1674 yucca_config:   unconfig
1675         @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
1676
1677 zeus_config:    unconfig
1678         @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
1679
1680 #########################################################################
1681 ## MPC8220 Systems
1682 #########################################################################
1683
1684 Alaska8220_config       \
1685 Yukon8220_config:       unconfig
1686         @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
1687
1688 sorcery_config:         unconfig
1689         @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
1690
1691 #########################################################################
1692 ## MPC824x Systems
1693 #########################################################################
1694 xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
1695
1696 A3000_config: unconfig
1697         @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
1698
1699 barco_config: unconfig
1700         @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
1701
1702 BMW_config: unconfig
1703         @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
1704
1705 CPC45_config    \
1706 CPC45_ROMBOOT_config:   unconfig
1707         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
1708         @cd $(obj)include ;                             \
1709         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1710                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1711                 $(XECHO) "... booting from 8-bit flash" ; \
1712         else \
1713                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1714                 $(XECHO) "... booting from 64-bit flash" ; \
1715         fi; \
1716         echo "export CONFIG_BOOT_ROM" >> config.mk;
1717
1718 CU824_config: unconfig
1719         @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
1720
1721 debris_config: unconfig
1722         @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
1723
1724 eXalion_config: unconfig
1725         @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
1726
1727 HIDDEN_DRAGON_config: unconfig
1728         @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
1729
1730 kvme080_config: unconfig
1731         @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
1732
1733 # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
1734 # time permits.
1735 #linkstation_HDLAN_config \
1736 # Remove this line when HDLAN is fixed
1737 linkstation_HGLAN_config: unconfig
1738         @mkdir -p $(obj)include
1739         @case $@ in \
1740                 *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
1741                 *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
1742         esac
1743         @$(MKCONFIG) -n $@ -a linkstation ppc mpc824x linkstation
1744
1745 MOUSSE_config: unconfig
1746         @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
1747
1748 MUSENKI_config: unconfig
1749         @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
1750
1751 MVBLUE_config:  unconfig
1752         @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
1753
1754 OXC_config: unconfig
1755         @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
1756
1757 PN62_config: unconfig
1758         @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
1759
1760 Sandpoint8240_config: unconfig
1761         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1762
1763 Sandpoint8245_config: unconfig
1764         @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
1765
1766 sbc8240_config: unconfig
1767         @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
1768
1769 SL8245_config: unconfig
1770         @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
1771
1772 utx8245_config: unconfig
1773         @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
1774
1775 #########################################################################
1776 ## MPC8260 Systems
1777 #########################################################################
1778
1779 atc_config:     unconfig
1780         @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
1781
1782 cogent_mpc8260_config:  unconfig
1783         @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
1784
1785 CPU86_config    \
1786 CPU86_ROMBOOT_config: unconfig
1787         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
1788         @cd $(obj)include ;                             \
1789         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1790                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1791                 $(XECHO) "... booting from 8-bit flash" ; \
1792         else \
1793                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1794                 $(XECHO) "... booting from 64-bit flash" ; \
1795         fi; \
1796         echo "export CONFIG_BOOT_ROM" >> config.mk;
1797
1798 CPU87_config    \
1799 CPU87_ROMBOOT_config: unconfig
1800         @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
1801         @cd $(obj)include ;                             \
1802         if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1803                 echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
1804                 $(XECHO) "... booting from 8-bit flash" ; \
1805         else \
1806                 echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
1807                 $(XECHO) "... booting from 64-bit flash" ; \
1808         fi; \
1809         echo "export CONFIG_BOOT_ROM" >> config.mk;
1810
1811 ep8248_config   \
1812 ep8248E_config  :       unconfig
1813         @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
1814
1815 ep8260_config:  unconfig
1816         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
1817
1818 ep82xxm_config: unconfig
1819         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
1820
1821 gw8260_config:  unconfig
1822         @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
1823
1824 hymod_config:   unconfig
1825         @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
1826
1827 IDS8247_config: unconfig
1828         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
1829
1830 IPHASE4539_config:      unconfig
1831         @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
1832
1833 ISPAN_config            \
1834 ISPAN_REVB_config:      unconfig
1835         @mkdir -p $(obj)include
1836         @if [ "$(findstring _REVB_,$@)" ] ; then \
1837                 echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
1838         fi
1839         @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
1840
1841 mgcoge_config   :       unconfig
1842         @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge keymile
1843
1844 MPC8260ADS_config       \
1845 MPC8260ADS_lowboot_config       \
1846 MPC8260ADS_33MHz_config \
1847 MPC8260ADS_33MHz_lowboot_config \
1848 MPC8260ADS_40MHz_config \
1849 MPC8260ADS_40MHz_lowboot_config \
1850 MPC8272ADS_config       \
1851 MPC8272ADS_lowboot_config       \
1852 PQ2FADS_config          \
1853 PQ2FADS_lowboot_config          \
1854 PQ2FADS-VR_config       \
1855 PQ2FADS-VR_lowboot_config       \
1856 PQ2FADS-ZU_config       \
1857 PQ2FADS-ZU_lowboot_config       \
1858 PQ2FADS-ZU_66MHz_config \
1859 PQ2FADS-ZU_66MHz_lowboot_config \
1860         :               unconfig
1861         @mkdir -p $(obj)include
1862         @mkdir -p $(obj)board/freescale/mpc8260ads
1863         $(if $(findstring PQ2FADS,$@), \
1864         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
1865         @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
1866         $(if $(findstring MHz,$@), \
1867         @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
1868         $(if $(findstring VR,$@), \
1869         @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
1870         @[ -z "$(findstring lowboot_,$@)" ] || \
1871                 { echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp ; \
1872                   $(XECHO) "... with lowboot configuration" ; \
1873                 }
1874         @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads freescale
1875
1876 MPC8266ADS_config:      unconfig
1877         @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
1878
1879 muas3001_dev_config \
1880 muas3001_config :       unconfig
1881         @mkdir -p $(obj)include
1882         @mkdir -p $(obj)board/muas3001
1883         @if [ "$(findstring dev,$@)" ] ; then \
1884                 echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
1885         fi
1886         @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
1887
1888 # PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
1889 PM825_config    \
1890 PM825_ROMBOOT_config    \
1891 PM825_BIGFLASH_config   \
1892 PM825_ROMBOOT_BIGFLASH_config   \
1893 PM826_config    \
1894 PM826_ROMBOOT_config    \
1895 PM826_BIGFLASH_config   \
1896 PM826_ROMBOOT_BIGFLASH_config:  unconfig
1897         @mkdir -p $(obj)include
1898         @mkdir -p $(obj)board/pm826
1899         @if [ "$(findstring PM825_,$@)" ] ; then \
1900                 echo "#define CONFIG_PCI"       >$(obj)include/config.h ; \
1901         else \
1902                 >$(obj)include/config.h ; \
1903         fi
1904         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1905                 $(XECHO) "... booting from 8-bit flash" ; \
1906                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1907                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1908                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1909                         $(XECHO) "... with 32 MB Flash" ; \
1910                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1911                 fi; \
1912         else \
1913                 $(XECHO) "... booting from 64-bit flash" ; \
1914                 if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
1915                         $(XECHO) "... with 32 MB Flash" ; \
1916                         echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
1917                         echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
1918                 else \
1919                         echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
1920                 fi; \
1921         fi
1922         @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
1923
1924 PM828_config    \
1925 PM828_PCI_config        \
1926 PM828_ROMBOOT_config    \
1927 PM828_ROMBOOT_PCI_config:       unconfig
1928         @mkdir -p $(obj)include
1929         @mkdir -p $(obj)board/pm826
1930         @if [ "$(findstring _PCI_,$@)" ] ; then \
1931                 echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
1932                 $(XECHO) "... with PCI enabled" ; \
1933         fi
1934         @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
1935                 $(XECHO) "... booting from 8-bit flash" ; \
1936                 echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
1937                 echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
1938         fi
1939         @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
1940
1941 ppmc8260_config:        unconfig
1942         @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
1943
1944 Rattler8248_config      \
1945 Rattler_config:         unconfig
1946         @mkdir -p $(obj)include
1947         $(if $(findstring 8248,$@), \
1948         @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
1949         @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
1950
1951 RPXsuper_config:        unconfig
1952         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
1953
1954 rsdproto_config:        unconfig
1955         @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
1956
1957 sacsng_config:  unconfig
1958         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
1959
1960 sbc8260_config: unconfig
1961         @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
1962
1963 SCM_config:             unconfig
1964         @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
1965
1966 TQM8255_AA_config \
1967 TQM8260_AA_config \
1968 TQM8260_AB_config \
1969 TQM8260_AC_config \
1970 TQM8260_AD_config \
1971 TQM8260_AE_config \
1972 TQM8260_AF_config \
1973 TQM8260_AG_config \
1974 TQM8260_AH_config \
1975 TQM8260_AI_config \
1976 TQM8265_AA_config:  unconfig
1977         @mkdir -p $(obj)include
1978         @case "$@" in \
1979         TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
1980         TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
1981         TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1982         TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
1983         TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1984         TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
1985         TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1986         TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
1987         TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
1988         TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1989         TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
1990         esac; \
1991         if [ "$${CTYPE}" != "MPC8260" ] ; then \
1992                 echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
1993         fi; \
1994         echo "#define CONFIG_$${CFREQ}MHz"      >>$(obj)include/config.h ; \
1995         echo "... with $${CFREQ}MHz system clock" ; \
1996         if [ "$${CACHE}" = "yes" ] ; then \
1997                 echo "#define CONFIG_L2_CACHE"  >>$(obj)include/config.h ; \
1998                 $(XECHO) "... with L2 Cache support" ; \
1999         else \
2000                 echo "#undef CONFIG_L2_CACHE"   >>$(obj)include/config.h ; \
2001                 $(XECHO) "... without L2 Cache support" ; \
2002         fi; \
2003         if [ "$${BMODE}" = "60x" ] ; then \
2004                 echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
2005                 $(XECHO) "... with 60x Bus Mode" ; \
2006         else \
2007                 echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
2008                 $(XECHO) "... without 60x Bus Mode" ; \
2009         fi
2010         @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260 tqc
2011
2012 TQM8272_config: unconfig
2013         @$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272 tqc
2014
2015 VoVPN-GW_66MHz_config   \
2016 VoVPN-GW_100MHz_config:         unconfig
2017         @mkdir -p $(obj)include
2018         @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
2019         @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
2020
2021 ZPC1900_config: unconfig
2022         @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
2023
2024 #########################################################################
2025 ## Coldfire
2026 #########################################################################
2027
2028 M5208EVBE_config :              unconfig
2029         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5208evbe freescale
2030
2031 M52277EVB_config \
2032 M52277EVB_spansion_config \
2033 M52277EVB_stmicro_config :      unconfig
2034         @case "$@" in \
2035         M52277EVB_config)               FLASH=SPANSION;; \
2036         M52277EVB_spansion_config)      FLASH=SPANSION;; \
2037         M52277EVB_stmicro_config)       FLASH=STMICRO;; \
2038         esac; \
2039         if [ "$${FLASH}" = "SPANSION" ] ; then \
2040                 echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
2041                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2042                 cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
2043                 $(XECHO) "... with SPANSION boot..." ; \
2044         fi; \
2045         if [ "$${FLASH}" = "STMICRO" ] ; then \
2046                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2047                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2048                 echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
2049                 cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
2050                 $(XECHO) "... with ST Micro boot..." ; \
2051         fi
2052         @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
2053
2054 M5235EVB_config \
2055 M5235EVB_Flash16_config \
2056 M5235EVB_Flash32_config:        unconfig
2057         @case "$@" in \
2058         M5235EVB_config)                FLASH=16;; \
2059         M5235EVB_Flash16_config)        FLASH=16;; \
2060         M5235EVB_Flash32_config)        FLASH=32;; \
2061         esac; \
2062         if [ "$${FLASH}" != "16" ] ; then \
2063                 echo "#define NORFLASH_PS32BIT  1" >> $(obj)include/config.h ; \
2064                 echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2065                 cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2066         else \
2067                 echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
2068                 cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
2069         fi
2070         @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
2071
2072 M5249EVB_config :               unconfig
2073         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
2074
2075 M5253DEMO_config :              unconfig
2076         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253demo freescale
2077
2078 M5253EVBE_config :              unconfig
2079         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
2080
2081 cobra5272_config :              unconfig
2082         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
2083
2084 EB+MCF-EV123_config :           unconfig
2085         @mkdir -p $(obj)include
2086         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2087         @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2088         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2089
2090 EB+MCF-EV123_internal_config :  unconfig
2091         @mkdir -p $(obj)include
2092         @mkdir -p $(obj)board/BuS/EB+MCF-EV123
2093         @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
2094         @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
2095
2096 idmr_config :                   unconfig
2097         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
2098
2099 M5271EVB_config :               unconfig
2100         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb freescale
2101
2102 M5272C3_config :                unconfig
2103         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3 freescale
2104
2105 M5275EVB_config :               unconfig
2106         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5275evb freescale
2107
2108 M5282EVB_config :               unconfig
2109         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
2110
2111 M53017EVB_config :              unconfig
2112         @$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
2113
2114 M5329AFEE_config \
2115 M5329BFEE_config :      unconfig
2116         @case "$@" in \
2117         M5329AFEE_config)       NAND=0;; \
2118         M5329BFEE_config)       NAND=16;; \
2119         esac; \
2120         if [ "$${NAND}" != "0" ] ; then \
2121                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2122         fi
2123         @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
2124
2125 M5373EVB_config :       unconfig
2126         @case "$@" in \
2127         M5373EVB_config)        NAND=16;; \
2128         esac; \
2129         if [ "$${NAND}" != "0" ] ; then \
2130                 echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
2131         fi
2132         @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
2133
2134 M54451EVB_config \
2135 M54451EVB_stmicro_config :      unconfig
2136         @case "$@" in \
2137         M54451EVB_config)               FLASH=NOR;; \
2138         M54451EVB_stmicro_config)       FLASH=STMICRO;; \
2139         esac; \
2140         if [ "$${FLASH}" = "NOR" ] ; then \
2141                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2142                 cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
2143                 $(XECHO) "... with NOR boot..." ; \
2144         fi; \
2145         if [ "$${FLASH}" = "STMICRO" ] ; then \
2146                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2147                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2148                 echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
2149                 cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
2150                 $(XECHO) "... with ST Micro boot..." ; \
2151         fi; \
2152         echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
2153         @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale
2154
2155 M54455EVB_config \
2156 M54455EVB_atmel_config \
2157 M54455EVB_intel_config \
2158 M54455EVB_a33_config \
2159 M54455EVB_a66_config \
2160 M54455EVB_i33_config \
2161 M54455EVB_i66_config \
2162 M54455EVB_stm33_config :        unconfig
2163         @case "$@" in \
2164         M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
2165         M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
2166         M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
2167         M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
2168         M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
2169         M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
2170         M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
2171         M54455EVB_stm33_config)         FLASH=STMICRO; FREQ=33333333;; \
2172         esac; \
2173         if [ "$${FLASH}" = "INTEL" ] ; then \
2174                 echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
2175                 echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2176                 cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
2177                 $(XECHO) "... with INTEL boot..." ; \
2178         fi; \
2179         if [ "$${FLASH}" = "ATMEL" ] ; then \
2180                 echo "#define CONFIG_SYS_ATMEL_BOOT"    >> $(obj)include/config.h ; \
2181                 echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2182                 cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2183                 $(XECHO) "... with ATMEL boot..." ; \
2184         fi; \
2185         if [ "$${FLASH}" = "STMICRO" ] ; then \
2186                 echo "#define CONFIG_CF_SBF"    >> $(obj)include/config.h ; \
2187                 echo "#define CONFIG_SYS_STMICRO_BOOT"  >> $(obj)include/config.h ; \
2188                 echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
2189                 cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
2190                 $(XECHO) "... with ST Micro boot..." ; \
2191         fi; \
2192         echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
2193         $(XECHO) "... with $${FREQ}Hz input clock"
2194         @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
2195
2196 M5475AFE_config \
2197 M5475BFE_config \
2198 M5475CFE_config \
2199 M5475DFE_config \
2200 M5475EFE_config \
2201 M5475FFE_config \
2202 M5475GFE_config :       unconfig
2203         @case "$@" in \
2204         M5475AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2205         M5475BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2206         M5475CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2207         M5475DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2208         M5475EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2209         M5475FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2210         M5475GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2211         esac; \
2212         echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \
2213         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2214         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2215         if [ "$${RAM1}" != "0" ] ; then \
2216                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2217         fi; \
2218         if [ "$${CODE}" != "0" ] ; then \
2219                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2220         fi; \
2221         if [ "$${VID}" == "1" ] ; then \
2222                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2223         fi; \
2224         if [ "$${USB}" == "1" ] ; then \
2225                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2226         fi
2227         @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
2228
2229 M5485AFE_config \
2230 M5485BFE_config \
2231 M5485CFE_config \
2232 M5485DFE_config \
2233 M5485EFE_config \
2234 M5485FFE_config \
2235 M5485GFE_config \
2236 M5485HFE_config :       unconfig
2237         @case "$@" in \
2238         M5485AFE_config)        BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2239         M5485BFE_config)        BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
2240         M5485CFE_config)        BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
2241         M5485DFE_config)        BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
2242         M5485EFE_config)        BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
2243         M5485FFE_config)        BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
2244         M5485GFE_config)        BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
2245         M5485HFE_config)        BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
2246         esac; \
2247         echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \
2248         echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
2249         echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
2250         if [ "$${RAM1}" != "0" ] ; then \
2251                 echo "#define CONFIG_SYS_DRAMSZ1        $${RAM1}" >> $(obj)include/config.h ; \
2252         fi; \
2253         if [ "$${CODE}" != "0" ] ; then \
2254                 echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
2255         fi; \
2256         if [ "$${VID}" == "1" ] ; then \
2257                 echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
2258         fi; \
2259         if [ "$${USB}" == "1" ] ; then \
2260                 echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
2261         fi
2262         @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
2263
2264 TASREG_config :         unconfig
2265         @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
2266
2267 #########################################################################
2268 ## MPC83xx Systems
2269 #########################################################################
2270
2271 kmeter1_config: unconfig
2272         @$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
2273
2274 MPC8313ERDB_33_config \
2275 MPC8313ERDB_66_config \
2276 MPC8313ERDB_NAND_33_config \
2277 MPC8313ERDB_NAND_66_config: unconfig
2278         @mkdir -p $(obj)include
2279         @mkdir -p $(obj)board/freescale/mpc8313erdb
2280         @if [ "$(findstring _33_,$@)" ] ; then \
2281                 $(XECHO) -n "...33M ..." ; \
2282                 echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
2283         fi ; \
2284         if [ "$(findstring _66_,$@)" ] ; then \
2285                 $(XECHO) -n "...66M..." ; \
2286                 echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
2287         fi ; \
2288         if [ "$(findstring _NAND_,$@)" ] ; then \
2289                 $(XECHO) -n "...NAND..." ; \
2290                 echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
2291                 echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
2292         fi ;
2293         @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
2294         @if [ "$(findstring _NAND_,$@)" ] ; then \
2295                 echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
2296         fi ;
2297
2298 MPC8315ERDB_config: unconfig
2299         @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
2300
2301 MPC8323ERDB_config:     unconfig
2302         @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
2303
2304 MPC832XEMDS_config \
2305 MPC832XEMDS_HOST_33_config \
2306 MPC832XEMDS_HOST_66_config \
2307 MPC832XEMDS_SLAVE_config \
2308 MPC832XEMDS_ATM_config: unconfig
2309         @mkdir -p $(obj)include
2310         @if [ "$(findstring _HOST_,$@)" ] ; then \
2311                 $(XECHO) -n "... PCI HOST " ; \
2312                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2313         fi ; \
2314         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2315                 $(XECHO) "...PCI SLAVE 66M"  ; \
2316                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2317                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2318         fi ; \
2319         if [ "$(findstring _33_,$@)" ] ; then \
2320                 $(XECHO) -n "...33M ..." ; \
2321                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2322                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2323         fi ; \
2324         if [ "$(findstring _66_,$@)" ] ; then \
2325                 $(XECHO) -n "...66M..." ; \
2326                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2327                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2328         fi ; \
2329         if [ "$(findstring _ATM_,$@)" ] ; then \
2330                 $(XECHO) -n "...ATM..." ; \
2331                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2332                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2333         fi ;
2334         @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
2335
2336 MPC8349EMDS_config:     unconfig
2337         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
2338
2339 MPC8349ITX_config \
2340 MPC8349ITX_LOWBOOT_config \
2341 MPC8349ITXGP_config:    unconfig
2342         @mkdir -p $(obj)include
2343         @mkdir -p $(obj)board/freescale/mpc8349itx
2344         @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
2345         @if [ "$(findstring GP,$@)" ] ; then \
2346                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2347         fi
2348         @if [ "$(findstring LOWBOOT,$@)" ] ; then \
2349                 echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
2350         fi
2351         @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
2352
2353 MPC8360EMDS_config \
2354 MPC8360EMDS_HOST_33_config \
2355 MPC8360EMDS_HOST_66_config \
2356 MPC8360EMDS_SLAVE_config \
2357 MPC8360EMDS_ATM_config: unconfig
2358         @mkdir -p $(obj)include
2359         @if [ "$(findstring _HOST_,$@)" ] ; then \
2360                 $(XECHO) -n "... PCI HOST " ; \
2361                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2362         fi ; \
2363         if [ "$(findstring _SLAVE_,$@)" ] ; then \
2364                 $(XECHO) "...PCI SLAVE 66M"  ; \
2365                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2366                 echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
2367         fi ; \
2368         if [ "$(findstring _33_,$@)" ] ; then \
2369                 $(XECHO) -n "...33M ..." ; \
2370                 echo "#define PCI_33M" >>$(obj)include/config.h ; \
2371                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2372         fi ; \
2373         if [ "$(findstring _66_,$@)" ] ; then \
2374                 $(XECHO) -n "...66M..." ; \
2375                 echo "#define PCI_66M" >>$(obj)include/config.h ; \
2376                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2377         fi ; \
2378         if [ "$(findstring _ATM_,$@)" ] ; then \
2379                 $(XECHO) -n "...ATM..." ; \
2380                 echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
2381                 echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
2382         fi ;
2383         @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
2384
2385 MPC8360ERDK_33_config \
2386 MPC8360ERDK_66_config \
2387 MPC8360ERDK_config:     unconfig
2388         @mkdir -p $(obj)include
2389         @if [ "$(findstring _33_,$@)" ] ; then \
2390                 $(XECHO) -n "... CLKIN 33MHz " ; \
2391                 echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
2392         fi ;
2393         @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
2394
2395 MPC837XEMDS_config \
2396 MPC837XEMDS_HOST_config:        unconfig
2397         @mkdir -p $(obj)include
2398         @if [ "$(findstring _HOST_,$@)" ] ; then \
2399                 $(XECHO) -n "... PCI HOST " ; \
2400                 echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
2401         fi ;
2402         @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
2403
2404 MPC837XERDB_config:     unconfig
2405         @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
2406
2407 MVBLM7_config: unconfig
2408         @$(MKCONFIG) $(@:_config=) ppc mpc83xx mvblm7 matrix_vision
2409
2410 sbc8349_config \
2411 sbc8349_PCI_33_config \
2412 sbc8349_PCI_66_config: unconfig
2413         @$(MKCONFIG) -t $(@:_config=) sbc8349 ppc mpc83xx sbc8349
2414
2415 SIMPC8313_LP_config \
2416 SIMPC8313_SP_config: unconfig
2417         @mkdir -p $(obj)include
2418         @mkdir -p $(obj)board/sheldon/simpc8313
2419         @if [ "$(findstring _LP_,$@)" ] ; then \
2420                 $(XECHO) -n "...Large Page NAND..." ; \
2421                 echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
2422         fi ; \
2423         if [ "$(findstring _SP_,$@)" ] ; then \
2424                 $(XECHO) -n "...Small Page NAND..." ; \
2425                 echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
2426         fi ;
2427         @$(MKCONFIG) -a SIMPC8313 ppc mpc83xx simpc8313 sheldon
2428         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
2429
2430 TQM834x_config: unconfig
2431         @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc
2432
2433 vme8349_config:         unconfig
2434         @$(MKCONFIG) $(@:_config=) ppc mpc83xx vme8349 esd
2435
2436 #########################################################################
2437 ## MPC85xx Systems
2438 #########################################################################
2439
2440 ATUM8548_config:        unconfig
2441         @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
2442
2443 MPC8536DS_NAND_config \
2444 MPC8536DS_SDCARD_config \
2445 MPC8536DS_SPIFLASH_config \
2446 MPC8536DS_36BIT_config \
2447 MPC8536DS_config:       unconfig
2448         @$(MKCONFIG) -t $(@:_config=) MPC8536DS ppc mpc85xx mpc8536ds freescale
2449
2450 MPC8540ADS_config:      unconfig
2451         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
2452
2453 MPC8540EVAL_config \
2454 MPC8540EVAL_33_config \
2455 MPC8540EVAL_66_config \
2456 MPC8540EVAL_33_slave_config \
2457 MPC8540EVAL_66_slave_config:      unconfig
2458         @mkdir -p $(obj)include
2459         @if [ "$(findstring _33_,$@)" ] ; then \
2460                 $(XECHO) "... 33 MHz PCI" ; \
2461         else \
2462                 echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
2463                 $(XECHO) "... 66 MHz PCI" ; \
2464         fi ; \
2465         if [ "$(findstring _slave_,$@)" ] ; then \
2466                 echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
2467                 $(XECHO) " slave" ; \
2468         else \
2469                 $(XECHO) " host" ; \
2470         fi
2471         @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
2472
2473 MPC8560ADS_config:      unconfig
2474         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
2475
2476 MPC8541CDS_legacy_config \
2477 MPC8541CDS_config:      unconfig
2478         @mkdir -p $(obj)include
2479         @if [ "$(findstring _legacy_,$@)" ] ; then \
2480                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2481                 $(XECHO) "... legacy" ; \
2482         fi
2483         @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
2484
2485 MPC8544DS_config:       unconfig
2486         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
2487
2488 MPC8548CDS_legacy_config \
2489 MPC8548CDS_config:      unconfig
2490         @mkdir -p $(obj)include
2491         @if [ "$(findstring _legacy_,$@)" ] ; then \
2492                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2493                 $(XECHO) "... legacy" ; \
2494         fi
2495         @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
2496
2497 MPC8555CDS_legacy_config \
2498 MPC8555CDS_config:      unconfig
2499         @mkdir -p $(obj)include
2500         @if [ "$(findstring _legacy_,$@)" ] ; then \
2501                 echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
2502                 $(XECHO) "... legacy" ; \
2503         fi
2504         @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
2505
2506 MPC8568MDS_config:      unconfig
2507         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
2508
2509 MPC8569MDS_config:      unconfig
2510         @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8569mds freescale
2511
2512 MPC8572DS_36BIT_config \
2513 MPC8572DS_config:       unconfig
2514         @$(MKCONFIG) -t $(@:_config=) MPC8572DS ppc mpc85xx mpc8572ds freescale
2515
2516 P2020DS_36BIT_config \
2517 P2020DS_config:         unconfig
2518         @$(MKCONFIG) -t $(@:_config=) P2020DS ppc mpc85xx p2020ds freescale
2519
2520 P1011RDB_config \
2521 P1011RDB_NAND_config \
2522 P1011RDB_SDCARD_config \
2523 P1011RDB_SPIFLASH_config \
2524 P1020RDB_config \
2525 P1020RDB_NAND_config \
2526 P1020RDB_SDCARD_config \
2527 P1020RDB_SPIFLASH_config \
2528 P2010RDB_config \
2529 P2010RDB_NAND_config \
2530 P2010RDB_SDCARD_config \
2531 P2010RDB_SPIFLASH_config \
2532 P2020RDB_config \
2533 P2020RDB_NAND_config \
2534 P2020RDB_SDCARD_config \
2535 P2020RDB_SPIFLASH_config:       unconfig
2536         @$(MKCONFIG) -t $(@:_config=) P1_P2_RDB ppc mpc85xx p1_p2_rdb freescale
2537
2538 PM854_config:   unconfig
2539         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
2540
2541 PM856_config:   unconfig
2542         @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
2543
2544 sbc8540_config \
2545 sbc8540_33_config \
2546 sbc8540_66_config:      unconfig
2547         @$(MKCONFIG) -t $(@:_config=) SBC8540 ppc mpc85xx sbc8560
2548
2549 sbc8548_config \
2550 sbc8548_PCI_33_config \
2551 sbc8548_PCI_66_config \
2552 sbc8548_PCI_33_PCIE_config \
2553 sbc8548_PCI_66_PCIE_config: unconfig
2554         @$(MKCONFIG) -t $(@:_config=) sbc8548 ppc mpc85xx sbc8548
2555
2556 sbc8560_config \
2557 sbc8560_33_config \
2558 sbc8560_66_config:      unconfig
2559         @$(MKCONFIG) -t $(@:_config=) sbc8560 ppc mpc85xx sbc8560
2560
2561 socrates_config:        unconfig
2562         @$(MKCONFIG) $(@:_config=) ppc mpc85xx socrates
2563
2564 stxgp3_config:          unconfig
2565         @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 stx
2566
2567 stxssa_config           \
2568 stxssa_4M_config:       unconfig
2569         @mkdir -p $(obj)include
2570         @if [ "$(findstring _4M_,$@)" ] ; then \
2571                 echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
2572                 $(XECHO) "... with 4 MiB flash memory" ; \
2573         fi
2574         @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa stx
2575
2576 TQM8540_config          \
2577 TQM8541_config          \
2578 TQM8548_config          \
2579 TQM8548_AG_config       \
2580 TQM8548_BE_config       \
2581 TQM8555_config          \
2582 TQM8560_config:         unconfig
2583         @mkdir -p $(obj)include
2584         @BTYPE=$(@:_config=); \
2585         CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
2586         $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
2587         echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
2588         echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
2589         echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
2590         echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
2591         @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
2592         @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
2593
2594 XPEDITE5200_config:     unconfig
2595         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
2596
2597 XPEDITE5370_config:     unconfig
2598         @$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
2599
2600 #########################################################################
2601 ## MPC86xx Systems
2602 #########################################################################
2603
2604 MPC8610HPCD_config:     unconfig
2605         @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
2606
2607 MPC8641HPCN_36BIT_config \
2608 MPC8641HPCN_config:    unconfig
2609         @mkdir -p $(obj)include
2610         @if [ "$(findstring _36BIT_,$@)" ] ; then \
2611                 echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
2612                 $(XECHO) "... enabling 36-bit physical addressing." ; \
2613         fi
2614         @$(MKCONFIG) -a MPC8641HPCN ppc mpc86xx mpc8641hpcn freescale
2615
2616 sbc8641d_config:        unconfig
2617         @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
2618
2619 XPEDITE5170_config:     unconfig
2620         @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
2621
2622 #########################################################################
2623 ## 74xx/7xx Systems
2624 #########################################################################
2625
2626 AmigaOneG3SE_config:    unconfig
2627         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
2628
2629 BAB7xx_config: unconfig
2630         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
2631
2632 CPCI750_config: unconfig
2633         @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
2634
2635 DB64360_config: unconfig
2636         @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
2637
2638 DB64460_config: unconfig
2639         @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
2640
2641 ELPPC_config: unconfig
2642         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
2643
2644 EVB64260_config \
2645 EVB64260_750CX_config:  unconfig
2646         @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
2647
2648 mpc7448hpc2_config:  unconfig
2649         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2 freescale
2650
2651 P3G4_config: unconfig
2652         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2653
2654 p3m750_config   \
2655 p3m7448_config:         unconfig
2656         @mkdir -p $(obj)include
2657         @if [ "$(findstring 750_,$@)" ] ; then \
2658                 echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
2659         else \
2660                 echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
2661         fi
2662         @$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
2663
2664 PCIPPC2_config \
2665 PCIPPC6_config: unconfig
2666         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
2667
2668 ppmc7xx_config: unconfig
2669         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
2670
2671 ZUMA_config:    unconfig
2672         @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
2673
2674 #========================================================================
2675 # ARM
2676 #========================================================================
2677 #########################################################################
2678 ## StrongARM Systems
2679 #########################################################################
2680
2681 assabet_config  :       unconfig
2682         @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
2683
2684 dnp1110_config  :       unconfig
2685         @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
2686
2687 gcplus_config   :       unconfig
2688         @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
2689
2690 lart_config     :       unconfig
2691         @$(MKCONFIG) $(@:_config=) arm sa1100 lart
2692
2693 shannon_config  :       unconfig
2694         @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
2695
2696 #########################################################################
2697 ## ARM92xT Systems
2698 #########################################################################
2699
2700 a320evb_config  :       unconfig
2701         @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320
2702
2703 #########################################################################
2704 ## Atmel AT91RM9200 Systems
2705 #########################################################################
2706
2707 at91rm9200dk_config     :       unconfig
2708         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
2709
2710 at91rm9200ek_config     :       unconfig
2711         @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200ek atmel at91rm9200
2712
2713 cmc_pu2_config  :       unconfig
2714         @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
2715
2716 CPUAT91_RAM_config \
2717 CPUAT91_config  :       unconfig
2718         @mkdir -p $(obj)include
2719         @echo "#define CONFIG_$(@:_config=) 1"  >$(obj)include/config.h
2720         @$(MKCONFIG) -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200
2721
2722 csb637_config   :       unconfig
2723         @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
2724
2725 kb9202_config   :       unconfig
2726         @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
2727
2728 m501sk_config   :       unconfig
2729         @$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
2730
2731 mp2usb_config   :       unconfig
2732         @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
2733
2734 #########################################################################
2735 ## Atmel ARM926EJ-S Systems
2736 #########################################################################
2737
2738 afeb9260_config:        unconfig
2739         @$(MKCONFIG) $(@:_config=) arm arm926ejs afeb9260 NULL at91
2740
2741 at91cap9adk_config      :       unconfig
2742         @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91
2743
2744 at91sam9260ek_nandflash_config \
2745 at91sam9260ek_dataflash_cs0_config \
2746 at91sam9260ek_dataflash_cs1_config \
2747 at91sam9260ek_config \
2748 at91sam9g20ek_nandflash_config \
2749 at91sam9g20ek_dataflash_cs0_config \
2750 at91sam9g20ek_dataflash_cs1_config \
2751 at91sam9g20ek_config    :       unconfig
2752         @mkdir -p $(obj)include
2753         @if [ "$(findstring 9g20,$@)" ] ; then \
2754                 echo "#define CONFIG_AT91SAM9G20EK 1"   >>$(obj)include/config.h ; \
2755                 $(XECHO) "... 9G20 Variant" ; \
2756         else \
2757                 echo "#define CONFIG_AT91SAM9260EK 1"   >>$(obj)include/config.h ; \
2758         fi;
2759         @if [ "$(findstring _nandflash,$@)" ] ; then \
2760                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2761                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2762         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2763                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2764                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2765         else \
2766                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2767                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2768         fi;
2769         @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2770
2771 at91sam9xeek_nandflash_config \
2772 at91sam9xeek_dataflash_cs0_config \
2773 at91sam9xeek_dataflash_cs1_config \
2774 at91sam9xeek_config     :       unconfig
2775         @mkdir -p $(obj)include
2776         @if [ "$(findstring _nandflash,$@)" ] ; then \
2777                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2778                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2779         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2780                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2781                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2782         else \
2783                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"   >>$(obj)include/config.h ; \
2784                 $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
2785         fi;
2786         @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
2787
2788 at91sam9261ek_nandflash_config \
2789 at91sam9261ek_dataflash_cs0_config \
2790 at91sam9261ek_dataflash_cs3_config \
2791 at91sam9261ek_config \
2792 at91sam9g10ek_nandflash_config \
2793 at91sam9g10ek_dataflash_cs0_config \
2794 at91sam9g10ek_dataflash_cs3_config \
2795 at91sam9g10ek_config    :       unconfig
2796         @mkdir -p $(obj)include
2797         @if [ "$(findstring 9g10,$@)" ] ; then \
2798                 echo "#define CONFIG_AT91SAM9G10EK 1"   >>$(obj)include/config.h ; \
2799                 $(XECHO) "... 9G10 Variant" ; \
2800         else \
2801                 echo "#define CONFIG_AT91SAM9261EK 1"   >>$(obj)include/config.h ; \
2802         fi;
2803         @if [ "$(findstring _nandflash,$@)" ] ; then \
2804                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2805                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2806         elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
2807                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"   >>$(obj)include/config.h ; \
2808                 $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
2809         else \
2810                 echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"   >>$(obj)include/config.h ; \
2811                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2812         fi;
2813         @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91
2814
2815 at91sam9263ek_norflash_config \
2816 at91sam9263ek_norflash_boot_config \
2817 at91sam9263ek_nandflash_config \
2818 at91sam9263ek_dataflash_config \
2819 at91sam9263ek_dataflash_cs0_config \
2820 at91sam9263ek_config    :       unconfig
2821         @mkdir -p $(obj)include
2822         @if [ "$(findstring _nandflash,$@)" ] ; then \
2823                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2824                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2825         elif [ "$(findstring norflash,$@)" ] ; then \
2826                 echo "#define CONFIG_SYS_USE_NORFLASH 1"        >>$(obj)include/config.h ; \
2827                 $(XECHO) "... with environment variable in NOR FLASH" ; \
2828         else \
2829                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2830                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2831         fi;
2832         @if [ "$(findstring norflash_boot,$@)" ] ; then \
2833                 echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1"   >>$(obj)include/config.h ; \
2834                 $(XECHO) "... and boot from NOR FLASH" ; \
2835         fi;
2836         @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91
2837
2838 at91sam9rlek_nandflash_config \
2839 at91sam9rlek_dataflash_config \
2840 at91sam9rlek_dataflash_cs0_config \
2841 at91sam9rlek_config     :       unconfig
2842         @mkdir -p $(obj)include
2843         @if [ "$(findstring _nandflash,$@)" ] ; then \
2844                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2845                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2846         else \
2847                 echo "#define CONFIG_SYS_USE_DATAFLASH 1"       >>$(obj)include/config.h ; \
2848                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2849         fi;
2850         @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91
2851
2852 CPU9G20_128M_config \
2853 CPU9G20_config \
2854 CPU9260_128M_config \
2855 CPU9260_config  :       unconfig
2856         @mkdir -p $(obj)include
2857         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2858         @$(MKCONFIG) -a cpu9260 arm arm926ejs cpu9260 eukrea at91
2859
2860 meesc_config    :       unconfig
2861         @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91
2862
2863 pm9261_config   :       unconfig
2864         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
2865
2866 at91sam9m10g45ek_nandflash_config \
2867 at91sam9m10g45ek_dataflash_config \
2868 at91sam9m10g45ek_dataflash_cs0_config \
2869 at91sam9m10g45ek_config \
2870 at91sam9g45ekes_nandflash_config \
2871 at91sam9g45ekes_dataflash_config \
2872 at91sam9g45ekes_dataflash_cs0_config \
2873 at91sam9g45ekes_config  :       unconfig
2874         @mkdir -p $(obj)include
2875                 @if [ "$(findstring 9m10,$@)" ] ; then \
2876                 echo "#define CONFIG_AT91SAM9M10G45EK 1"        >>$(obj)include/config.h ; \
2877                 $(XECHO) "... 9M10G45 Variant" ; \
2878         else \
2879                 echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
2880         fi;
2881
2882         @if [ "$(findstring _nandflash,$@)" ] ; then \
2883                 echo "#define CONFIG_SYS_USE_NANDFLASH 1"       >>$(obj)include/config.h ; \
2884                 $(XECHO) "... with environment variable in NAND FLASH" ; \
2885         else \
2886                 echo "#define CONFIG_ATMEL_SPI 1"       >>$(obj)include/config.h ; \
2887                 $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
2888         fi;
2889         @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
2890
2891 pm9263_config   :       unconfig
2892         @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
2893
2894 SBC35_A9G20_NANDFLASH_config \
2895 SBC35_A9G20_EEPROM_config \
2896 SBC35_A9G20_config      :       unconfig
2897         @mkdir -p $(obj)include
2898         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2899         @$(MKCONFIG) -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
2900
2901 TNY_A9G20_NANDFLASH_config \
2902 TNY_A9G20_EEPROM_config \
2903 TNY_A9G20_config \
2904 TNY_A9260_NANDFLASH_config \
2905 TNY_A9260_EEPROM_config \
2906 TNY_A9260_config        :       unconfig
2907         @mkdir -p $(obj)include
2908         @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
2909         @$(MKCONFIG) -a tny_a9260 arm arm926ejs tny_a9260 calao at91
2910
2911 ########################################################################
2912 ## ARM Integrator boards - see doc/README-integrator for more info.
2913 integratorap_config     \
2914 ap_config               \
2915 ap966_config            \
2916 ap922_config            \
2917 ap922_XA10_config       \
2918 ap7_config              \
2919 ap720t_config           \
2920 ap920t_config           \
2921 ap926ejs_config         \
2922 ap946es_config: unconfig
2923         @board/armltd/integrator/split_by_variant.sh ap $@
2924
2925 integratorcp_config     \
2926 cp_config               \
2927 cp920t_config           \
2928 cp926ejs_config         \
2929 cp946es_config          \
2930 cp1136_config           \
2931 cp966_config            \
2932 cp922_config            \
2933 cp922_XA10_config       \
2934 cp1026_config: unconfig
2935         @board/armltd/integrator/split_by_variant.sh cp $@
2936
2937 da830evm_config:        unconfig
2938         @$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci
2939
2940 davinci_dvevm_config :  unconfig
2941         @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
2942
2943 davinci_schmoogie_config :      unconfig
2944         @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
2945
2946 davinci_sffsdr_config : unconfig
2947         @$(MKCONFIG) $(@:_config=) arm arm926ejs sffsdr davinci davinci
2948
2949 davinci_sonata_config : unconfig
2950         @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
2951
2952 davinci_dm355evm_config :       unconfig
2953         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355evm davinci davinci
2954
2955 davinci_dm355leopard_config :   unconfig
2956         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm355leopard davinci davinci
2957
2958 davinci_dm365evm_config :       unconfig
2959         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm365evm davinci davinci
2960
2961 davinci_dm6467evm_config :      unconfig
2962         @$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
2963
2964 imx27lite_config:       unconfig
2965         @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
2966
2967 lpd7a400_config \
2968 lpd7a404_config:        unconfig
2969         @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
2970
2971 mv88f6281gtw_ge_config: unconfig
2972         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
2973
2974 mx1ads_config   :       unconfig
2975         @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
2976
2977 mx1fs2_config   :       unconfig
2978         @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
2979
2980 netstar_config:         unconfig
2981         @$(MKCONFIG) $(@:_config=) arm arm925t netstar
2982
2983 nhk8815_config \
2984 nhk8815_onenand_config: unconfig
2985         @mkdir -p $(obj)include
2986         @ > $(obj)include/config.h
2987         @if [ "$(findstring _onenand, $@)" ] ; then \
2988                 echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
2989                 $(XECHO) "... configured to boot from OneNand Flash"; \
2990         else \
2991                 $(XECHO) "... configured to boot from Nand Flash"; \
2992         fi
2993         @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
2994
2995 omap1510inn_config :    unconfig
2996         @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn ti
2997
2998 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
2999
3000 omap1610inn_config \
3001 omap1610inn_cs0boot_config \
3002 omap1610inn_cs3boot_config \
3003 omap1610inn_cs_autoboot_config \
3004 omap1610h2_config \
3005 omap1610h2_cs0boot_config \
3006 omap1610h2_cs3boot_config \
3007 omap1610h2_cs_autoboot_config:  unconfig
3008         @mkdir -p $(obj)include
3009         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3010                 echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
3011                 $(XECHO) "... configured for CS0 boot"; \
3012         elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
3013                 echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
3014                 $(XECHO) "... configured for CS_AUTO boot"; \
3015         else \
3016                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3017                 $(XECHO) "... configured for CS3 boot"; \
3018         fi;
3019         @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap
3020
3021 omap5912osk_config :    unconfig
3022         @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk ti omap
3023
3024 openrd_base_config: unconfig
3025         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3026
3027 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
3028
3029 omap730p2_config \
3030 omap730p2_cs0boot_config \
3031 omap730p2_cs3boot_config :      unconfig
3032         @mkdir -p $(obj)include
3033         @if [ "$(findstring _cs0boot_, $@)" ] ; then \
3034                 echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
3035                 $(XECHO) "... configured for CS0 boot"; \
3036         else \
3037                 echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
3038                 $(XECHO) "... configured for CS3 boot"; \
3039         fi;
3040         @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 ti omap
3041
3042 rd6281a_config: unconfig
3043         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3044
3045 sbc2410x_config: unconfig
3046         @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
3047
3048 scb9328_config  :       unconfig
3049         @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
3050
3051 sheevaplug_config: unconfig
3052         @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
3053
3054 smdk2400_config :       unconfig
3055         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
3056
3057 smdk2410_config :       unconfig
3058         @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
3059
3060 SX1_stdout_serial_config \
3061 SX1_config:             unconfig
3062         @mkdir -p $(obj)include
3063         @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
3064                 echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3065                 $(XECHO) "... configured for stdout serial"; \
3066         else \
3067                 echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
3068                 $(XECHO) "... configured for stdout usbtty"; \
3069         fi;
3070         @$(MKCONFIG) SX1 arm arm925t sx1
3071
3072 # TRAB default configuration:   8 MB Flash, 32 MB RAM
3073 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
3074
3075 trab_config \
3076 trab_bigram_config \
3077 trab_bigflash_config \
3078 trab_old_config:        unconfig
3079         @mkdir -p $(obj)include
3080         @mkdir -p $(obj)board/trab
3081         @[ -z "$(findstring _bigram,$@)" ] || \
3082                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3083                   echo "#define CONFIG_RAM_32MB"   >>$(obj)include/config.h ; \
3084                   $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
3085                 }
3086         @[ -z "$(findstring _bigflash,$@)" ] || \
3087                 { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
3088                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3089                   $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
3090                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3091                 }
3092         @[ -z "$(findstring _old,$@)" ] || \
3093                 { echo "#define CONFIG_FLASH_8MB"  >>$(obj)include/config.h ; \
3094                   echo "#define CONFIG_RAM_16MB"   >>$(obj)include/config.h ; \
3095                   $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
3096                   echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
3097                 }
3098         @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
3099
3100 VCMA9_config    :       unconfig
3101         @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
3102
3103 #########################################################################
3104 # ARM supplied Versatile development boards
3105 #########################################################################
3106
3107 cm4008_config   :       unconfig
3108         @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
3109
3110 cm41xx_config   :       unconfig
3111         @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
3112
3113 versatile_config        \
3114 versatileab_config      \
3115 versatilepb_config :    unconfig
3116         @board/armltd/versatile/split_by_variant.sh $@
3117
3118 voiceblue_config:       unconfig
3119         @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
3120
3121 #########################################################################
3122 ## S3C44B0 Systems
3123 #########################################################################
3124
3125 B2_config       :       unconfig
3126         @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
3127
3128 #########################################################################
3129 ## ARM720T Systems
3130 #########################################################################
3131
3132 armadillo_config:       unconfig
3133         @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
3134
3135 ep7312_config   :       unconfig
3136         @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
3137
3138 impa7_config    :       unconfig
3139         @$(MKCONFIG) $(@:_config=) arm arm720t impa7
3140
3141 modnet50_config :       unconfig
3142         @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
3143
3144 evb4510_config :        unconfig
3145         @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 NULL s3c4510b
3146
3147 lpc2292sodimm_config:   unconfig
3148         @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
3149
3150 SMN42_config    :       unconfig
3151         @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
3152
3153 #########################################################################
3154 ## ARM CORTEX Systems
3155 #########################################################################
3156
3157 devkit8000_config :     unconfig
3158         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 devkit8000 timll omap3
3159
3160 omap3_beagle_config :   unconfig
3161         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle ti omap3
3162
3163 omap3_overo_config :    unconfig
3164         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo NULL omap3
3165
3166 omap3_evm_config :      unconfig
3167         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm ti omap3
3168
3169 omap3_pandora_config :  unconfig
3170         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora NULL omap3
3171
3172 omap3_sdp3430_config :  unconfig
3173         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 sdp3430 ti omap3
3174
3175 omap3_zoom1_config :    unconfig
3176         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 logicpd omap3
3177
3178 omap3_zoom2_config :    unconfig
3179         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 logicpd omap3
3180
3181 smdkc100_config:        unconfig
3182         @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 smdkc100 samsung s5pc1xx
3183
3184 #########################################################################
3185 ## XScale Systems
3186 #########################################################################
3187
3188 actux1_config   :       unconfig
3189         @$(MKCONFIG) $(@:_config=) arm ixp actux1
3190
3191 actux2_config   :       unconfig
3192         @$(MKCONFIG) $(@:_config=) arm ixp actux2
3193
3194 actux3_config   :       unconfig
3195         @$(MKCONFIG) $(@:_config=) arm ixp actux3
3196
3197 actux4_config   :       unconfig
3198         @$(MKCONFIG) $(@:_config=) arm ixp actux4
3199
3200 cerf250_config :        unconfig
3201         @$(MKCONFIG) $(@:_config=) arm pxa cerf250
3202
3203 cradle_config   :       unconfig
3204         @$(MKCONFIG) $(@:_config=) arm pxa cradle
3205
3206 csb226_config   :       unconfig
3207         @$(MKCONFIG) $(@:_config=) arm pxa csb226
3208
3209 delta_config :  unconfig
3210         @$(MKCONFIG) $(@:_config=) arm pxa delta
3211
3212 innokom_config  :       unconfig
3213         @$(MKCONFIG) $(@:_config=) arm pxa innokom
3214
3215 ixdp425_config  :       unconfig
3216         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3217
3218 ixdpg425_config :       unconfig
3219         @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
3220
3221 lubbock_config  :       unconfig
3222         @$(MKCONFIG) $(@:_config=) arm pxa lubbock
3223
3224 pleb2_config    :       unconfig
3225         @$(MKCONFIG) $(@:_config=) arm pxa pleb2
3226
3227 logodl_config   :       unconfig
3228         @$(MKCONFIG) $(@:_config=) arm pxa logodl
3229
3230 pdnb3_config \
3231 scpu_config:    unconfig
3232         @mkdir -p $(obj)include
3233         @if [ "$(findstring scpu_,$@)" ] ; then \
3234                 echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
3235                 $(XECHO) "... on SCPU board variant" ; \
3236         fi
3237         @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
3238
3239 pxa255_idp_config:      unconfig
3240         @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
3241
3242 polaris_config \
3243 trizepsiv_config        :       unconfig
3244         @mkdir -p $(obj)include
3245         @if [ "$(findstring polaris,$@)" ] ; then \
3246                 echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
3247         fi;
3248         @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
3249
3250 wepep250_config :       unconfig
3251         @$(MKCONFIG) $(@:_config=) arm pxa wepep250
3252
3253 xaeniax_config  :       unconfig
3254         @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
3255
3256 xm250_config    :       unconfig
3257         @$(MKCONFIG) $(@:_config=) arm pxa xm250
3258
3259 xsengine_config :       unconfig
3260         @$(MKCONFIG) $(@:_config=) arm pxa xsengine
3261
3262 zylonite_config :
3263         @$(MKCONFIG) $(@:_config=) arm pxa zylonite
3264
3265 #########################################################################
3266 ## ARM1136 Systems
3267 #########################################################################
3268
3269 apollon_config          : unconfig
3270         @mkdir -p $(obj)include
3271         @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
3272         @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
3273         @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
3274
3275 imx31_litekit_config    : unconfig
3276         @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit logicpd mx31
3277
3278 imx31_phycore_eet_config \
3279 imx31_phycore_config    : unconfig
3280         @mkdir -p $(obj)include
3281         @if [ -n "$(findstring _eet_,$@)" ]; then                       \
3282                 echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;      \
3283         fi
3284         @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
3285
3286 mx31ads_config          : unconfig
3287         @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
3288
3289 mx31pdk_config \
3290 mx31pdk_nand_config     : unconfig
3291         @mkdir -p $(obj)include
3292         @if [ -n "$(findstring _nand_,$@)" ]; then                                      \
3293                 echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;            \
3294         else                                                                            \
3295                 echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;     \
3296                 echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h;    \
3297         fi
3298         @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
3299
3300 omap2420h4_config       : unconfig
3301         @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 ti omap24xx
3302
3303 qong_config             : unconfig
3304         @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
3305
3306 #########################################################################
3307 ## ARM1176 Systems
3308 #########################################################################
3309 smdk6400_noUSB_config   \
3310 smdk6400_config :       unconfig
3311         @mkdir -p $(obj)include $(obj)board/samsung/smdk6400
3312         @mkdir -p $(obj)nand_spl/board/samsung/smdk6400
3313         @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
3314         @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then                       \
3315                 echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3316                 $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx;         \
3317         else                                                                            \
3318                 echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
3319                 $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx;   \
3320         fi
3321         @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
3322
3323 #========================================================================
3324 # i386
3325 #========================================================================
3326 #########################################################################
3327 ## AMD SC520 CDP
3328 #########################################################################
3329 eNET_config     :       unconfig
3330         @$(MKCONFIG) $(@:_config=) i386 i386 eNET NULL sc520
3331
3332 sc520_cdp_config        :       unconfig
3333         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp NULL sc520
3334
3335 sc520_spunk_config      :       unconfig
3336         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3337
3338 sc520_spunk_rel_config  :       unconfig
3339         @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk NULL sc520
3340
3341 #========================================================================
3342 # MIPS
3343 #========================================================================
3344 #########################################################################
3345 ## MIPS32 4Kc
3346 #########################################################################
3347
3348 xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
3349
3350 incaip_100MHz_config    \
3351 incaip_133MHz_config    \
3352 incaip_150MHz_config    \
3353 incaip_config: unconfig
3354         @mkdir -p $(obj)include
3355         @[ -z "$(findstring _100MHz,$@)" ] || \
3356                 { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
3357                   $(XECHO) "... with 100MHz system clock" ; \
3358                 }
3359         @[ -z "$(findstring _133MHz,$@)" ] || \
3360                 { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
3361                   $(XECHO) "... with 133MHz system clock" ; \
3362                 }
3363         @[ -z "$(findstring _150MHz,$@)" ] || \
3364                 { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
3365                   $(XECHO) "... with 150MHz system clock" ; \
3366                 }
3367         @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
3368
3369 tb0229_config: unconfig
3370         @$(MKCONFIG) $(@:_config=) mips mips tb0229
3371
3372 vct_premium_config              \
3373 vct_premium_small_config        \
3374 vct_premium_onenand_config      \
3375 vct_premium_onenand_small_config \
3376 vct_platinum_config             \
3377 vct_platinum_small_config       \
3378 vct_platinum_onenand_config     \
3379 vct_platinum_onenand_small_config \
3380 vct_platinumavc_config          \
3381 vct_platinumavc_small_config    \
3382 vct_platinumavc_onenand_config  \
3383 vct_platinumavc_onenand_small_config: unconfig
3384         @mkdir -p $(obj)include
3385         @if [ "$(findstring _premium,$@)" ] ; then \
3386                 echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h ; \
3387                 $(XECHO) "... on Premium board variant" ; \
3388         fi
3389         @if [ "$(findstring _platinum_,$@)" ] ; then \
3390                 echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h ; \
3391                 $(XECHO) "... on Platinum board variant" ; \
3392         fi
3393         @if [ "$(findstring _platinumavc,$@)" ] ; then \
3394                 echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h ; \
3395                 $(XECHO) "... on PlatinumAVC board variant" ; \
3396         fi
3397         @if [ "$(findstring _onenand,$@)" ] ; then \
3398                 echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h ; \
3399                 $(XECHO) "... on OneNAND board variant" ; \
3400         fi
3401         @if [ "$(findstring _small,$@)" ] ; then \
3402                 echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h ; \
3403                 $(XECHO) "... stripped down image variant" ; \
3404         fi
3405         @$(MKCONFIG) -a vct mips mips vct micronas
3406
3407 #########################################################################
3408 ## MIPS32 AU1X00
3409 #########################################################################
3410
3411 dbau1000_config         :       unconfig
3412         @mkdir -p $(obj)include
3413         @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
3414         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3415
3416 dbau1100_config         :       unconfig
3417         @mkdir -p $(obj)include
3418         @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
3419         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3420
3421 dbau1500_config         :       unconfig
3422         @mkdir -p $(obj)include
3423         @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
3424         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3425
3426 dbau1550_config         :       unconfig
3427         @mkdir -p $(obj)include
3428         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3429         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3430
3431 dbau1550_el_config      :       unconfig
3432         @mkdir -p $(obj)include
3433         @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
3434         @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
3435
3436 gth2_config             :       unconfig
3437         @mkdir -p $(obj)include
3438         @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
3439         @$(MKCONFIG) -a gth2 mips mips gth2
3440
3441 pb1000_config           :       unconfig
3442         @mkdir -p $(obj)include
3443         @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
3444         @$(MKCONFIG) -a pb1x00 mips mips pb1x00
3445
3446 qemu_mips_config        : unconfig
3447         @mkdir -p $(obj)include
3448         @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
3449         @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
3450
3451 #########################################################################
3452 ## MIPS64 5Kc
3453 #########################################################################
3454
3455 purple_config :         unconfig
3456         @$(MKCONFIG) $(@:_config=) mips mips purple
3457
3458 #========================================================================
3459 # Nios
3460 #========================================================================
3461 #########################################################################
3462 ## Nios32
3463 #########################################################################
3464
3465 ADNPESC1_DNPEVA2_base_32_config \
3466 ADNPESC1_base_32_config         \
3467 ADNPESC1_config: unconfig
3468         @mkdir -p $(obj)include
3469         @[ -z "$(findstring _DNPEVA2,$@)" ] || \
3470                 { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
3471                   $(XECHO) "... DNP/EVA2 configuration" ; \
3472                 }
3473         @[ -z "$(findstring _base_32,$@)" ] || \
3474                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3475                   $(XECHO) "... NIOS 'base_32' configuration" ; \
3476                 }
3477         @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
3478                 { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
3479                   $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
3480                 }
3481         @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
3482
3483 DK1C20_safe_32_config           \
3484 DK1C20_standard_32_config       \
3485 DK1C20_config:  unconfig
3486         @mkdir -p $(obj)include
3487         @[ -z "$(findstring _safe_32,$@)" ] || \
3488                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3489                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3490                 }
3491         @[ -z "$(findstring _standard_32,$@)" ] || \
3492                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3493                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3494                 }
3495         @[ -z "$(findstring DK1C20_config,$@)" ] || \
3496                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3497                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3498                 }
3499         @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
3500
3501 DK1S10_safe_32_config           \
3502 DK1S10_standard_32_config       \
3503 DK1S10_mtx_ldk_20_config        \
3504 DK1S10_config:  unconfig
3505         @mkdir -p $(obj)include
3506         @[ -z "$(findstring _safe_32,$@)" ] || \
3507                 { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
3508                   $(XECHO) "... NIOS 'safe_32' configuration" ; \
3509                 }
3510         @[ -z "$(findstring _standard_32,$@)" ] || \
3511                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3512                   $(XECHO) "... NIOS 'standard_32' configuration" ; \
3513                 }
3514         @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
3515                 { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
3516                   $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
3517                 }
3518         @[ -z "$(findstring DK1S10_config,$@)" ] || \
3519                 { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
3520                   $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
3521                 }
3522         @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
3523
3524 #########################################################################
3525 ## Nios-II
3526 #########################################################################
3527
3528 EP1C20_config : unconfig
3529         @$(MKCONFIG)  EP1C20 nios2 nios2 ep1c20 altera
3530
3531 EP1S10_config : unconfig
3532         @$(MKCONFIG)  EP1S10 nios2 nios2 ep1s10 altera
3533
3534 EP1S40_config : unconfig
3535         @$(MKCONFIG)  EP1S40 nios2 nios2 ep1s40 altera
3536
3537 PK1C20_config : unconfig
3538         @$(MKCONFIG)  PK1C20 nios2 nios2 pk1c20 psyent
3539
3540 PCI5441_config : unconfig
3541         @$(MKCONFIG)  PCI5441 nios2 nios2 pci5441 psyent
3542
3543 #========================================================================
3544 ## Microblaze
3545 #========================================================================
3546
3547 microblaze-generic_config:      unconfig
3548         @mkdir -p $(obj)include
3549         @$(MKCONFIG) -a $(@:_config=) microblaze microblaze microblaze-generic xilinx
3550
3551 #========================================================================
3552 # Blackfin
3553 #========================================================================
3554
3555 # Analog Devices boards
3556 BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \
3557         bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit
3558
3559 # Bluetechnix tinyboards
3560 BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf537u cm-bf548 cm-bf561 tcm-bf537
3561
3562 # Misc third party boards
3563 BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp
3564
3565 # I-SYST Micromodule
3566 BFIN_BOARDS += ibf-dsp561
3567
3568 $(BFIN_BOARDS:%=%_config)       : unconfig
3569         @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=)
3570
3571 #========================================================================
3572 # AVR32
3573 #========================================================================
3574
3575 atngw100_config :       unconfig
3576         @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
3577
3578 atstk1002_config        :       unconfig
3579         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3580
3581 atstk1003_config        :       unconfig
3582         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3583
3584 atstk1004_config        :       unconfig
3585         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3586
3587 atstk1006_config        :       unconfig
3588         @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
3589
3590 favr-32-ezkit_config    :       unconfig
3591         @$(MKCONFIG) $(@:_config=) avr32 at32ap favr-32-ezkit earthlcd at32ap700x
3592
3593 hammerhead_config       :       unconfig
3594         @$(MKCONFIG) $(@:_config=) avr32 at32ap hammerhead miromico at32ap700x
3595
3596 mimc200_config          :       unconfig
3597         @$(MKCONFIG) $(@:_config=) avr32 at32ap mimc200 mimc at32ap700x
3598
3599 #========================================================================
3600 # SH3 (SuperH)
3601 #========================================================================
3602
3603 #########################################################################
3604 ## sh2 (Renesas SuperH)
3605 #########################################################################
3606 rsk7203_config: unconfig
3607         @mkdir -p $(obj)include
3608         @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
3609         @$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
3610
3611 #########################################################################
3612 ## sh3 (Renesas SuperH)
3613 #########################################################################
3614
3615 mpr2_config: unconfig
3616         @mkdir -p $(obj)include
3617         @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h
3618         @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2
3619
3620 ms7720se_config: unconfig
3621         @mkdir -p $(obj)include
3622         @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h
3623         @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
3624
3625 #########################################################################
3626 ## sh4 (Renesas SuperH)
3627 #########################################################################
3628
3629 MigoR_config :       unconfig
3630         @mkdir -p $(obj)include
3631         @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h
3632         @$(MKCONFIG) -a $(@:_config=) sh sh4 MigoR renesas
3633
3634 ms7750se_config: unconfig
3635         @mkdir -p $(obj)include
3636         @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
3637         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
3638
3639 ms7722se_config :       unconfig
3640         @mkdir -p $(obj)include
3641         @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
3642         @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
3643
3644 r2dplus_config  :   unconfig
3645         @mkdir -p $(obj)include
3646         @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h
3647         @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus renesas
3648
3649 r7780mp_config: unconfig
3650         @mkdir -p $(obj)include
3651         @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h
3652         @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp renesas
3653
3654 sh7763rdp_config  :   unconfig
3655         @mkdir -p $(obj)include
3656         @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
3657         @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
3658
3659 xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
3660 sh7785lcr_32bit_config \
3661 sh7785lcr_config  :   unconfig
3662         @mkdir -p $(obj)include
3663         @mkdir -p $(obj)board/renesas/sh7785lcr
3664         @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
3665         @if [ "$(findstring 32bit, $@)" ] ; then \
3666                 echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
3667                 echo "TEXT_BASE = 0x8ff80000" > \
3668                         $(obj)board/renesas/sh7785lcr/config.tmp ; \
3669                   $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
3670         fi
3671         @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
3672
3673 ap325rxa_config  :   unconfig
3674         @mkdir -p $(obj)include
3675         @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
3676         @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
3677
3678 espt_config  :   unconfig
3679         @mkdir -p $(obj)include
3680         @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
3681         @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
3682
3683 #========================================================================
3684 # SPARC
3685 #========================================================================
3686
3687 #########################################################################
3688 ## LEON3
3689 #########################################################################
3690
3691 # Gaisler GR-XC3S-1500 board
3692 gr_xc3s_1500_config : unconfig
3693         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_xc3s_1500 gaisler
3694
3695 # Gaisler GR-CPCI-AX2000 board, a General purpose FPGA-AX system
3696 gr_cpci_ax2000_config : unconfig
3697         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_cpci_ax2000 gaisler
3698
3699 # Gaisler GRLIB template design (GPL SPARC/LEON3) for Altera NIOS
3700 # Development board Stratix II edition, FPGA Device EP2S60.
3701 gr_ep2s60_config: unconfig
3702         @$(MKCONFIG) $(@:_config=) sparc leon3 gr_ep2s60 gaisler
3703
3704 # Gaisler LEON3 GRSIM simulator
3705 grsim_config : unconfig
3706         @$(MKCONFIG) $(@:_config=) sparc leon3 grsim gaisler
3707
3708 #########################################################################
3709 ## LEON2
3710 #########################################################################
3711
3712 # Gaisler LEON2 GRSIM simulator
3713 grsim_leon2_config : unconfig
3714         @$(MKCONFIG) $(@:_config=) sparc leon2 grsim_leon2 gaisler
3715
3716 #########################################################################
3717 #########################################################################
3718 #########################################################################
3719
3720 clean:
3721         @rm -f $(obj)examples/standalone/82559_eeprom                     \
3722                $(obj)examples/standalone/atmel_df_pow2                    \
3723                $(obj)examples/standalone/eepro100_eeprom                  \
3724                $(obj)examples/standalone/hello_world                      \
3725                $(obj)examples/standalone/interrupt                        \
3726                $(obj)examples/standalone/mem_to_mem_idma2intr             \
3727                $(obj)examples/standalone/sched                            \
3728                $(obj)examples/standalone/smc91111_eeprom                  \
3729                $(obj)examples/standalone/test_burst                       \
3730                $(obj)examples/standalone/timer
3731         @rm -f $(obj)examples/api/demo{,.bin}
3732         @rm -f $(obj)tools/bmp_logo        $(obj)tools/easylogo/easylogo  \
3733                $(obj)tools/env/{fw_printenv,fw_setenv}                    \
3734                $(obj)tools/envcrc                                         \
3735                $(obj)tools/gdb/{astest,gdbcont,gdbsend}                   \
3736                $(obj)tools/gen_eth_addr    $(obj)tools/img2srec           \
3737                $(obj)tools/mkimage         $(obj)tools/mpc86x_clk         \
3738                $(obj)tools/ncb             $(obj)tools/ubsha1
3739         @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}        \
3740                $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}      \
3741                $(obj)board/trab/trab_fkt   $(obj)board/voiceblue/eeprom   \
3742                $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
3743                $(obj)lib_blackfin/u-boot.lds                              \
3744                $(obj)u-boot.lds                                           \
3745                $(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
3746         @rm -f $(obj)include/bmp_logo.h
3747         @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map}
3748         @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
3749         @rm -f $(ONENAND_BIN)
3750         @rm -f $(obj)onenand_ipl/u-boot.lds
3751         @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
3752         @find $(OBJTREE) -type f \
3753                 \( -name 'core' -o -name '*.bak' -o -name '*~' \
3754                 -o -name '*.o'  -o -name '*.a' -o -name '*.exe' \) -print \
3755                 | xargs rm -f
3756
3757 clobber:        clean
3758         @find $(OBJTREE) -type f \( -name .depend \
3759                 -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
3760                 -print0 \
3761                 | xargs -0 rm -f
3762         @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
3763                 $(obj)cscope.* $(obj)*.*~
3764         @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
3765         @rm -f $(obj)u-boot.kwb
3766         @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
3767         @rm -f $(obj)cpu/mpc824x/bedbug_603e.c
3768         @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
3769         @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
3770         @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
3771
3772 ifeq ($(OBJTREE),$(SRCTREE))
3773 mrproper \
3774 distclean:      clobber unconfig
3775 else
3776 mrproper \
3777 distclean:      clobber unconfig
3778         rm -rf $(obj)*
3779 endif
3780
3781 backup:
3782         F=`basename $(TOPDIR)` ; cd .. ; \
3783         gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
3784
3785 #########################################################################