arch/arm/Kconfig

   1 menu "ARM architecture"
   2         depends on ARM
   3
   4 config SYS_ARCH
   5         default "arm"
   6
   7 config ARM64
   8         bool
   9         select PHYS_64BIT
  10         select SYS_CACHE_SHIFT_6
  11
  12 config DMA_ADDR_T_64BIT
  13         bool
  14         default y if ARM64
  15
  16 config HAS_VBAR
  17         bool
  18
  19 config HAS_THUMB2
  20         bool
  21
  22 # Used for compatibility with asm files copied from the kernel
  23 config ARM_ASM_UNIFIED
  24         bool
  25         default y
  26
  27 # Used for compatibility with asm files copied from the kernel
  28 config THUMB2_KERNEL
  29         bool
  30
  31 # If set, the workarounds for these ARM errata are applied early during U-Boot
  32 # startup. Note that in general these options force the workarounds to be
  33 # applied; no CPU-type/version detection exists, unlike the similar options in
  34 # the Linux kernel. Do not set these options unless they apply!  Also note that
  35 # the following can be machine specific errata. These do have ability to
  36 # provide rudimentary version and machine specific checks, but expect no
  37 # product checks:
  38 # CONFIG_ARM_ERRATA_430973
  39 # CONFIG_ARM_ERRATA_454179
  40 # CONFIG_ARM_ERRATA_621766
  41 # CONFIG_ARM_ERRATA_798870
  42 # CONFIG_ARM_ERRATA_801819
  43 config ARM_ERRATA_430973
  44         bool
  45
  46 config ARM_ERRATA_454179
  47         bool
  48
  49 config ARM_ERRATA_621766
  50         bool
  51
  52 config ARM_ERRATA_716044
  53         bool
  54
  55 config ARM_ERRATA_725233
  56         bool
  57
  58 config ARM_ERRATA_742230
  59         bool
  60
  61 config ARM_ERRATA_743622
  62         bool
  63
  64 config ARM_ERRATA_751472
  65         bool
  66
  67 config ARM_ERRATA_761320
  68         bool
  69
  70 config ARM_ERRATA_773022
  71         bool
  72
  73 config ARM_ERRATA_774769
  74         bool
  75
  76 config ARM_ERRATA_794072
  77         bool
  78
  79 config ARM_ERRATA_798870
  80         bool
  81
  82 config ARM_ERRATA_801819
  83         bool
  84
  85 config ARM_ERRATA_826974
  86         bool
  87
  88 config ARM_ERRATA_828024
  89         bool
  90
  91 config ARM_ERRATA_829520
  92         bool
  93
  94 config ARM_ERRATA_833069
  95         bool
  96
  97 config ARM_ERRATA_833471
  98         bool
  99
 100 config ARM_ERRATA_852421
 101         bool
 102
 103 config ARM_ERRATA_852423
 104         bool
 105
 106 config CPU_ARM720T
 107         bool
 108         select SYS_CACHE_SHIFT_5
 109
 110 config CPU_ARM920T
 111         bool
 112         select SYS_CACHE_SHIFT_5
 113
 114 config CPU_ARM926EJS
 115         bool
 116         select SYS_CACHE_SHIFT_5
 117
 118 config CPU_ARM946ES
 119         bool
 120         select SYS_CACHE_SHIFT_5
 121
 122 config CPU_ARM1136
 123         bool
 124         select SYS_CACHE_SHIFT_5
 125
 126 config CPU_ARM1176
 127         bool
 128         select HAS_VBAR
 129         select SYS_CACHE_SHIFT_5
 130
 131 config CPU_V7
 132         bool
 133         select HAS_VBAR
 134         select HAS_THUMB2
 135         select SYS_CACHE_SHIFT_6
 136
 137 config CPU_V7M
 138         bool
 139         select HAS_THUMB2
 140         select THUMB2_KERNEL
 141         select SYS_CACHE_SHIFT_5
 142
 143 config CPU_PXA
 144         bool
 145         select SYS_CACHE_SHIFT_5
 146
 147 config CPU_SA1100
 148         bool
 149         select SYS_CACHE_SHIFT_5
 150
 151 config SYS_CPU
 152         default "arm720t" if CPU_ARM720T
 153         default "arm920t" if CPU_ARM920T
 154         default "arm926ejs" if CPU_ARM926EJS
 155         default "arm946es" if CPU_ARM946ES
 156         default "arm1136" if CPU_ARM1136
 157         default "arm1176" if CPU_ARM1176
 158         default "armv7" if CPU_V7
 159         default "armv7m" if CPU_V7M
 160         default "pxa" if CPU_PXA
 161         default "sa1100" if CPU_SA1100
 162         default "armv8" if ARM64
 163
 164 config SYS_ARM_ARCH
 165         int
 166         default 4 if CPU_ARM720T
 167         default 4 if CPU_ARM920T
 168         default 5 if CPU_ARM926EJS
 169         default 5 if CPU_ARM946ES
 170         default 6 if CPU_ARM1136
 171         default 6 if CPU_ARM1176
 172         default 7 if CPU_V7
 173         default 7 if CPU_V7M
 174         default 5 if CPU_PXA
 175         default 4 if CPU_SA1100
 176         default 8 if ARM64
 177
 178 config SYS_CACHE_SHIFT_5
 179         bool
 180
 181 config SYS_CACHE_SHIFT_6
 182         bool
 183
 184 config SYS_CACHE_SHIFT_7
 185         bool
 186
 187 config SYS_CACHELINE_SIZE
 188         int
 189         default 128 if SYS_CACHE_SHIFT_7
 190         default 64 if SYS_CACHE_SHIFT_6
 191         default 32 if SYS_CACHE_SHIFT_5
 192
 193 config ARM_SMCCC
 194         bool "Support for ARM SMC Calling Convention (SMCCC)"
 195         depends on CPU_V7 || ARM64
 196         select ARM_PSCI_FW
 197         help
 198           Say Y here if you want to enable ARM SMC Calling Convention.
 199           This should be enabled if U-Boot needs to communicate with system
 200           firmware (for example, PSCI) according to SMCCC.
 201
 202 config SEMIHOSTING
 203         bool "support boot from semihosting"
 204         help
 205           In emulated environments, semihosting is a way for
 206           the hosted environment to call out to the emulator to
 207           retrieve files from the host machine.
 208
 209 config SYS_THUMB_BUILD
 210         bool "Build U-Boot using the Thumb instruction set"
 211         depends on !ARM64
 212         help
 213            Use this flag to build U-Boot using the Thumb instruction set for
 214            ARM architectures. Thumb instruction set provides better code
 215            density. For ARM architectures that support Thumb2 this flag will
 216            result in Thumb2 code generated by GCC.
 217
 218 config SPL_SYS_THUMB_BUILD
 219         bool "Build SPL using the Thumb instruction set"
 220         default y if SYS_THUMB_BUILD
 221         depends on !ARM64
 222         help
 223            Use this flag to build SPL using the Thumb instruction set for
 224            ARM architectures. Thumb instruction set provides better code
 225            density. For ARM architectures that support Thumb2 this flag will
 226            result in Thumb2 code generated by GCC.
 227
 228 config SYS_L2CACHE_OFF
 229         bool "L2cache off"
 230         help
 231           If SoC does not support L2CACHE or one do not want to enable
 232           L2CACHE, choose this option.
 233
 234 config ENABLE_ARM_SOC_BOOT0_HOOK
 235         bool "prepare BOOT0 header"
 236         help
 237           If the SoC's BOOT0 requires a header area filled with (magic)
 238           values, then choose this option, and create a define called
 239           ARM_SOC_BOOT0_HOOK which contains the required assembler
 240           preprocessor code.
 241
 242 config ARM_CORTEX_CPU_IS_UP
 243         bool
 244         default n
 245
 246 config USE_ARCH_MEMCPY
 247         bool "Use an assembly optimized implementation of memcpy"
 248         default y
 249         depends on !ARM64
 250         help
 251           Enable the generation of an optimized version of memcpy.
 252           Such implementation may be faster under some conditions
 253           but may increase the binary size.
 254
 255 config SPL_USE_ARCH_MEMCPY
 256         bool "Use an assembly optimized implementation of memcpy for SPL"
 257         default y if USE_ARCH_MEMCPY
 258         depends on !ARM64
 259         help
 260           Enable the generation of an optimized version of memcpy.
 261           Such implementation may be faster under some conditions
 262           but may increase the binary size.
 263
 264 config USE_ARCH_MEMSET
 265         bool "Use an assembly optimized implementation of memset"
 266         default y
 267         depends on !ARM64
 268         help
 269           Enable the generation of an optimized version of memset.
 270           Such implementation may be faster under some conditions
 271           but may increase the binary size.
 272
 273 config SPL_USE_ARCH_MEMSET
 274         bool "Use an assembly optimized implementation of memset for SPL"
 275         default y if USE_ARCH_MEMSET
 276         depends on !ARM64
 277         help
 278           Enable the generation of an optimized version of memset.
 279           Such implementation may be faster under some conditions
 280           but may increase the binary size.
 281
 282 config ARM64_SUPPORT_AARCH32
 283         bool "ARM64 system support AArch32 execution state"
 284         default y if ARM64 && !TARGET_THUNDERX_88XX
 285         help
 286           This ARM64 system supports AArch32 execution state.
 287
 288 choice
 289         prompt "Target select"
 290         default TARGET_HIKEY
 291
 292 config ARCH_AT91
 293         bool "Atmel AT91"
 294         select SPL_BOARD_INIT if SPL
 295
 296 config TARGET_EDB93XX
 297         bool "Support edb93xx"
 298         select CPU_ARM920T
 299
 300 config TARGET_ASPENITE
 301         bool "Support aspenite"
 302         select CPU_ARM926EJS
 303
 304 config TARGET_GPLUGD
 305         bool "Support gplugd"
 306         select CPU_ARM926EJS
 307
 308 config ARCH_DAVINCI
 309         bool "TI DaVinci"
 310         select CPU_ARM926EJS
 311         help
 312           Support for TI's DaVinci platform.
 313
 314 config KIRKWOOD
 315         bool "Marvell Kirkwood"
 316         select CPU_ARM926EJS
 317         select BOARD_EARLY_INIT_F
 318         select ARCH_MISC_INIT
 319
 320 config ARCH_MVEBU
 321         bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 322         select OF_CONTROL
 323         select OF_SEPARATE
 324         select DM
 325         select DM_ETH
 326         select DM_SERIAL
 327         select DM_SPI
 328         select DM_SPI_FLASH
 329
 330 config TARGET_DEVKIT3250
 331         bool "Support devkit3250"
 332         select CPU_ARM926EJS
 333         select SUPPORT_SPL
 334
 335 config TARGET_WORK_92105
 336         bool "Support work_92105"
 337         select CPU_ARM926EJS
 338         select SUPPORT_SPL
 339
 340 config TARGET_MX25PDK
 341         bool "Support mx25pdk"
 342         select BOARD_LATE_INIT
 343         select CPU_ARM926EJS
 344         select BOARD_EARLY_INIT_F
 345
 346 config TARGET_ZMX25
 347         bool "Support zmx25"
 348         select BOARD_LATE_INIT
 349         select CPU_ARM926EJS
 350
 351 config TARGET_APF27
 352         bool "Support apf27"
 353         select CPU_ARM926EJS
 354         select SUPPORT_SPL
 355
 356 config TARGET_APX4DEVKIT
 357         bool "Support apx4devkit"
 358         select CPU_ARM926EJS
 359         select SUPPORT_SPL
 360
 361 config TARGET_XFI3
 362         bool "Support xfi3"
 363         select CPU_ARM926EJS
 364         select SUPPORT_SPL
 365
 366 config TARGET_M28EVK
 367         bool "Support m28evk"
 368         select CPU_ARM926EJS
 369         select SUPPORT_SPL
 370
 371 config TARGET_MX23EVK
 372         bool "Support mx23evk"
 373         select CPU_ARM926EJS
 374         select SUPPORT_SPL
 375         select BOARD_EARLY_INIT_F
 376
 377 config TARGET_MX28EVK
 378         bool "Support mx28evk"
 379         select CPU_ARM926EJS
 380         select SUPPORT_SPL
 381         select BOARD_EARLY_INIT_F
 382
 383 config TARGET_MX23_OLINUXINO
 384         bool "Support mx23_olinuxino"
 385         select CPU_ARM926EJS
 386         select SUPPORT_SPL
 387         select BOARD_EARLY_INIT_F
 388
 389 config TARGET_BG0900
 390         bool "Support bg0900"
 391         select CPU_ARM926EJS
 392         select SUPPORT_SPL
 393
 394 config TARGET_SANSA_FUZE_PLUS
 395         bool "Support sansa_fuze_plus"
 396         select CPU_ARM926EJS
 397         select SUPPORT_SPL
 398
 399 config TARGET_SC_SPS_1
 400         bool "Support sc_sps_1"
 401         select CPU_ARM926EJS
 402         select SUPPORT_SPL
 403
 404 config ORION5X
 405         bool "Marvell Orion"
 406         select CPU_ARM926EJS
 407
 408 config TARGET_SPEAR300
 409         bool "Support spear300"
 410         select CPU_ARM926EJS
 411         select BOARD_EARLY_INIT_F
 412
 413 config TARGET_SPEAR310
 414         bool "Support spear310"
 415         select CPU_ARM926EJS
 416         select BOARD_EARLY_INIT_F
 417
 418 config TARGET_SPEAR320
 419         bool "Support spear320"
 420         select CPU_ARM926EJS
 421         select BOARD_EARLY_INIT_F
 422
 423 config TARGET_SPEAR600
 424         bool "Support spear600"
 425         select CPU_ARM926EJS
 426         select BOARD_EARLY_INIT_F
 427
 428 config TARGET_STV0991
 429         bool "Support stv0991"
 430         select CPU_V7
 431         select DM
 432         select DM_SERIAL
 433         select DM_SPI
 434         select DM_SPI_FLASH
 435         select SPI_FLASH
 436
 437 config TARGET_X600
 438         bool "Support x600"
 439         select BOARD_LATE_INIT
 440         select CPU_ARM926EJS
 441         select SUPPORT_SPL
 442
 443 config TARGET_IMX31_PHYCORE
 444         bool "Support imx31_phycore_eet"
 445         select CPU_ARM1136
 446         select BOARD_EARLY_INIT_F
 447
 448 config TARGET_IMX31_PHYCORE_EET
 449         bool "Support imx31_phycore_eet"
 450         select BOARD_LATE_INIT
 451         select CPU_ARM1136
 452         select BOARD_EARLY_INIT_F
 453
 454 config TARGET_MX31ADS
 455         bool "Support mx31ads"
 456         select CPU_ARM1136
 457         select BOARD_EARLY_INIT_F
 458
 459 config TARGET_MX31PDK
 460         bool "Support mx31pdk"
 461         select BOARD_LATE_INIT
 462         select CPU_ARM1136
 463         select SUPPORT_SPL
 464         select BOARD_EARLY_INIT_F
 465
 466 config TARGET_WOODBURN
 467         bool "Support woodburn"
 468         select CPU_ARM1136
 469
 470 config TARGET_WOODBURN_SD
 471         bool "Support woodburn_sd"
 472         select CPU_ARM1136
 473         select SUPPORT_SPL
 474
 475 config TARGET_FLEA3
 476         bool "Support flea3"
 477         select CPU_ARM1136
 478
 479 config TARGET_MX35PDK
 480         bool "Support mx35pdk"
 481         select BOARD_LATE_INIT
 482         select CPU_ARM1136
 483
 484 config ARCH_BCM283X
 485         bool "Broadcom BCM283X family"
 486         select DM
 487         select DM_SERIAL
 488         select DM_GPIO
 489         select OF_CONTROL
 490         imply FAT_WRITE
 491
 492 config TARGET_VEXPRESS_CA15_TC2
 493         bool "Support vexpress_ca15_tc2"
 494         select CPU_V7
 495         select CPU_V7_HAS_NONSEC
 496         select CPU_V7_HAS_VIRT
 497
 498 config TARGET_VEXPRESS_CA5X2
 499         bool "Support vexpress_ca5x2"
 500         select CPU_V7
 501
 502 config TARGET_VEXPRESS_CA9X4
 503         bool "Support vexpress_ca9x4"
 504         select CPU_V7
 505
 506 config TARGET_BCM23550_W1D
 507         bool "Support bcm23550_w1d"
 508         select CPU_V7
 509         imply CRC32_VERIFY
 510         imply FAT_WRITE
 511
 512 config TARGET_BCM28155_AP
 513         bool "Support bcm28155_ap"
 514         select CPU_V7
 515         imply CRC32_VERIFY
 516         imply FAT_WRITE
 517
 518 config TARGET_BCMCYGNUS
 519         bool "Support bcmcygnus"
 520         select CPU_V7
 521         imply CRC32_VERIFY
 522         imply CMD_HASH
 523         imply FAT_WRITE
 524         imply HASH_VERIFY
 525
 526 config TARGET_BCMNSP
 527         bool "Support bcmnsp"
 528         select CPU_V7
 529
 530 config TARGET_BCMNS2
 531         bool "Support Broadcom Northstar2"
 532         select ARM64
 533         help
 534           Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
 535           ARMv8 Cortex-A57 processors targeting a broad range of networking
 536           applications
 537
 538 config ARCH_EXYNOS
 539         bool "Samsung EXYNOS"
 540         select DM
 541         select DM_I2C
 542         select DM_SPI_FLASH
 543         select DM_SERIAL
 544         select DM_SPI
 545         select DM_GPIO
 546         select DM_KEYBOARD
 547         imply FAT_WRITE
 548
 549 config ARCH_S5PC1XX
 550         bool "Samsung S5PC1XX"
 551         select CPU_V7
 552         select DM
 553         select DM_SERIAL
 554         select DM_GPIO
 555         select DM_I2C
 556
 557 config ARCH_HIGHBANK
 558         bool "Calxeda Highbank"
 559         select CPU_V7
 560
 561 config ARCH_INTEGRATOR
 562         bool "ARM Ltd. Integrator family"
 563         select DM
 564         select DM_SERIAL
 565
 566 config ARCH_KEYSTONE
 567         bool "TI Keystone"
 568         select CPU_V7
 569         select SUPPORT_SPL
 570         select SYS_THUMB_BUILD
 571         select CMD_POWEROFF
 572         imply CMD_MTDPARTS
 573         imply FIT
 574
 575 config ARCH_OMAP2PLUS
 576         bool "TI OMAP2+"
 577         select CPU_V7
 578         select SPL_BOARD_INIT if SPL
 579         select SUPPORT_SPL
 580         imply FIT
 581
 582 config ARCH_MESON
 583         bool "Amlogic Meson"
 584         help
 585           Support for the Meson SoC family developed by Amlogic Inc.,
 586           targeted at media players and tablet computers. We currently
 587           support the S905 (GXBaby) 64-bit SoC.
 588
 589 config ARCH_MX7ULP
 590         bool "NXP MX7ULP"
 591         select CPU_V7
 592         select ROM_UNIFIED_SECTIONS
 593
 594 config ARCH_MX7
 595         bool "Freescale MX7"
 596         select CPU_V7
 597         select SYS_FSL_HAS_SEC if SECURE_BOOT
 598         select SYS_FSL_SEC_COMPAT_4
 599         select SYS_FSL_SEC_LE
 600         select BOARD_EARLY_INIT_F
 601         select ARCH_MISC_INIT
 602
 603 config ARCH_MX6
 604         bool "Freescale MX6"
 605         select CPU_V7
 606         select SYS_FSL_HAS_SEC if SECURE_BOOT
 607         select SYS_FSL_SEC_COMPAT_4
 608         select SYS_FSL_SEC_LE
 609         select SYS_THUMB_BUILD if SPL
 610
 611 config ARCH_MX5
 612         bool "Freescale MX5"
 613         select CPU_V7
 614         select BOARD_EARLY_INIT_F
 615
 616 config ARCH_RMOBILE
 617         bool "Renesas ARM SoCs"
 618         select DM
 619         select DM_SERIAL
 620         select BOARD_EARLY_INIT_F
 621         imply FAT_WRITE
 622         imply SYS_THUMB_BUILD
 623
 624 config TARGET_S32V234EVB
 625         bool "Support s32v234evb"
 626         select ARM64
 627         select SYS_FSL_ERRATUM_ESDHC111
 628
 629 config ARCH_SNAPDRAGON
 630         bool "Qualcomm Snapdragon SoCs"
 631         select ARM64
 632         select DM
 633         select DM_GPIO
 634         select DM_SERIAL
 635         select SPMI
 636         select OF_CONTROL
 637         select OF_SEPARATE
 638
 639 config ARCH_SOCFPGA
 640         bool "Altera SOCFPGA family"
 641         select CPU_V7
 642         select SUPPORT_SPL
 643         select OF_CONTROL
 644         select SPL_OF_CONTROL
 645         select DM
 646         select DM_SPI_FLASH
 647         select DM_SPI
 648         select ENABLE_ARM_SOC_BOOT0_HOOK
 649         select ARCH_EARLY_INIT_R
 650         select ARCH_MISC_INIT
 651         select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 652         select SYS_THUMB_BUILD
 653         imply CMD_MTDPARTS
 654         imply CRC32_VERIFY
 655         imply FAT_WRITE
 656
 657 config ARCH_SUNXI
 658         bool "Support sunxi (Allwinner) SoCs"
 659         select CMD_GPIO
 660         select CMD_MMC if MMC
 661         select CMD_USB if DISTRO_DEFAULTS
 662         select DM
 663         select DM_ETH
 664         select DM_GPIO
 665         select DM_KEYBOARD
 666         select DM_SERIAL
 667         select DM_USB if DISTRO_DEFAULTS
 668         select OF_BOARD_SETUP
 669         select OF_CONTROL
 670         select OF_SEPARATE
 671         select SPL_STACK_R if SPL
 672         select SPL_SYS_MALLOC_SIMPLE if SPL
 673         select SYS_NS16550
 674         select SPL_SYS_THUMB_BUILD if !ARM64
 675         select USB if DISTRO_DEFAULTS
 676         select USB_STORAGE if DISTRO_DEFAULTS
 677         select USB_KEYBOARD if DISTRO_DEFAULTS
 678         select USE_TINY_PRINTF
 679         imply FAT_WRITE
 680         imply PRE_CONSOLE_BUFFER
 681         imply SPL_GPIO_SUPPORT
 682         imply SPL_LIBCOMMON_SUPPORT
 683         imply SPL_LIBDISK_SUPPORT
 684         imply SPL_LIBGENERIC_SUPPORT
 685         imply SPL_MMC_SUPPORT if MMC
 686         imply SPL_POWER_SUPPORT
 687         imply SPL_SERIAL_SUPPORT
 688
 689 config TARGET_TS4600
 690         bool "Support TS4600"
 691         select CPU_ARM926EJS
 692         select SUPPORT_SPL
 693
 694 config ARCH_VF610
 695         bool "Freescale Vybrid"
 696         select CPU_V7
 697         select SYS_FSL_ERRATUM_ESDHC111
 698         imply CMD_MTDPARTS
 699
 700 config ARCH_ZYNQ
 701         bool "Xilinx Zynq Platform"
 702         select BOARD_LATE_INIT
 703         select CPU_V7
 704         select SUPPORT_SPL
 705         select OF_CONTROL
 706         select SPL_BOARD_INIT if SPL
 707         select SPL_OF_CONTROL if SPL
 708         select DM
 709         select DM_ETH
 710         select DM_GPIO
 711         select SPL_DM if SPL
 712         select DM_MMC
 713         select DM_MMC_OPS
 714         select DM_SPI
 715         select DM_SERIAL
 716         select DM_SPI_FLASH
 717         select SPL_SEPARATE_BSS if SPL
 718         select DM_USB if USB
 719         select BLK
 720         select CLK
 721         select SPL_CLK
 722         select CLK_ZYNQ
 723         imply CMD_CLK
 724         imply FAT_WRITE
 725
 726 config ARCH_ZYNQMP
 727         bool "Support Xilinx ZynqMP Platform"
 728         select ARM64
 729         select BOARD_LATE_INIT
 730         select DM
 731         select OF_CONTROL
 732         select DM_SERIAL
 733         select SUPPORT_SPL
 734         select CLK
 735         select SPL_BOARD_INIT if SPL
 736         select SPL_CLK
 737         select DM_USB if USB
 738         imply FAT_WRITE
 739
 740 config TEGRA
 741         bool "NVIDIA Tegra"
 742         imply FAT_WRITE
 743
 744 config TARGET_VEXPRESS64_AEMV8A
 745         bool "Support vexpress_aemv8a"
 746         select ARM64
 747
 748 config TARGET_VEXPRESS64_BASE_FVP
 749         bool "Support Versatile Express ARMv8a FVP BASE model"
 750         select ARM64
 751         select SEMIHOSTING
 752
 753 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 754         bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 755         select ARM64
 756         help
 757           This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 758           the default config to allow the user to load the images directly into
 759           DRAM using model parameters rather than by using semi-hosting to load
 760           the files from the host filesystem.
 761
 762 config TARGET_VEXPRESS64_JUNO
 763         bool "Support Versatile Express Juno Development Platform"
 764         select ARM64
 765
 766 config TARGET_LS2080A_EMU
 767         bool "Support ls2080a_emu"
 768         select ARCH_LS2080A
 769         select ARM64
 770         select ARMV8_MULTIENTRY
 771         select ARCH_MISC_INIT
 772         help
 773           Support for Freescale LS2080A_EMU platform
 774           The LS2080A Development System (EMULATOR) is a pre silicon
 775           development platform that supports the QorIQ LS2080A
 776           Layerscape Architecture processor.
 777
 778 config TARGET_LS2080A_SIMU
 779         bool "Support ls2080a_simu"
 780         select ARCH_LS2080A
 781         select ARM64
 782         select ARMV8_MULTIENTRY
 783         select ARCH_MISC_INIT
 784         help
 785           Support for Freescale LS2080A_SIMU platform
 786           The LS2080A Development System (QDS) is a pre silicon
 787           development platform that supports the QorIQ LS2080A
 788           Layerscape Architecture processor.
 789
 790 config TARGET_LS2080AQDS
 791         bool "Support ls2080aqds"
 792         select ARCH_LS2080A
 793         select ARM64
 794         select ARMV8_MULTIENTRY
 795         select BOARD_LATE_INIT
 796         select SUPPORT_SPL
 797         select ARCH_MISC_INIT
 798         imply SCSI
 799         help
 800           Support for Freescale LS2080AQDS platform
 801           The LS2080A Development System (QDS) is a high-performance
 802           development platform that supports the QorIQ LS2080A
 803           Layerscape Architecture processor.
 804
 805 config TARGET_LS2080ARDB
 806         bool "Support ls2080ardb"
 807         select ARCH_LS2080A
 808         select ARM64
 809         select ARMV8_MULTIENTRY
 810         select BOARD_LATE_INIT
 811         select SUPPORT_SPL
 812         select ARCH_MISC_INIT
 813         imply SCSI
 814         help
 815           Support for Freescale LS2080ARDB platform.
 816           The LS2080A Reference design board (RDB) is a high-performance
 817           development platform that supports the QorIQ LS2080A
 818           Layerscape Architecture processor.
 819
 820 config TARGET_LS2081ARDB
 821         bool "Support ls2081ardb"
 822         select ARCH_LS2080A
 823         select ARM64
 824         select ARMV8_MULTIENTRY
 825         select BOARD_LATE_INIT
 826         select SUPPORT_SPL
 827         select ARCH_MISC_INIT
 828         help
 829           Support for Freescale LS2081ARDB platform.
 830           The LS2081A Reference design board (RDB) is a high-performance
 831           development platform that supports the QorIQ LS2081A/LS2041A
 832           Layerscape Architecture processor.
 833
 834 config TARGET_HIKEY
 835         bool "Support HiKey 96boards Consumer Edition Platform"
 836         select ARM64
 837         select DM
 838         select DM_GPIO
 839         select DM_SERIAL
 840         select OF_CONTROL
 841           help
 842           Support for HiKey 96boards platform. It features a HI6220
 843           SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 844
 845 config TARGET_POPLAR
 846         bool "Support Poplar 96boards Enterprise Edition Platform"
 847         select ARM64
 848         select DM
 849         select OF_CONTROL
 850         select DM_SERIAL
 851         select DM_USB
 852           help
 853           Support for Poplar 96boards EE platform. It features a HI3798cv200
 854           SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
 855           making it capable of running any commercial set-top solution based on
 856           Linux or Android.
 857
 858 config TARGET_LS1012AQDS
 859         bool "Support ls1012aqds"
 860         select ARCH_LS1012A
 861         select ARM64
 862         select BOARD_LATE_INIT
 863         help
 864           Support for Freescale LS1012AQDS platform.
 865           The LS1012A Development System (QDS) is a high-performance
 866           development platform that supports the QorIQ LS1012A
 867           Layerscape Architecture processor.
 868
 869 config TARGET_LS1012ARDB
 870         bool "Support ls1012ardb"
 871         select ARCH_LS1012A
 872         select ARM64
 873         select BOARD_LATE_INIT
 874         imply SCSI
 875         help
 876           Support for Freescale LS1012ARDB platform.
 877           The LS1012A Reference design board (RDB) is a high-performance
 878           development platform that supports the QorIQ LS1012A
 879           Layerscape Architecture processor.
 880
 881 config TARGET_LS1012AFRDM
 882         bool "Support ls1012afrdm"
 883         select ARCH_LS1012A
 884         select ARM64
 885         help
 886           Support for Freescale LS1012AFRDM platform.
 887           The LS1012A Freedom  board (FRDM) is a high-performance
 888           development platform that supports the QorIQ LS1012A
 889           Layerscape Architecture processor.
 890
 891 config TARGET_LS1021AQDS
 892         bool "Support ls1021aqds"
 893         select BOARD_LATE_INIT
 894         select CPU_V7
 895         select CPU_V7_HAS_NONSEC
 896         select CPU_V7_HAS_VIRT
 897         select SUPPORT_SPL
 898         select ARCH_LS1021A
 899         select ARCH_SUPPORT_PSCI
 900         select LS1_DEEP_SLEEP
 901         select SYS_FSL_DDR
 902         select BOARD_EARLY_INIT_F
 903         imply SCSI
 904
 905 config TARGET_LS1021ATWR
 906         bool "Support ls1021atwr"
 907         select BOARD_LATE_INIT
 908         select CPU_V7
 909         select CPU_V7_HAS_NONSEC
 910         select CPU_V7_HAS_VIRT
 911         select SUPPORT_SPL
 912         select ARCH_LS1021A
 913         select ARCH_SUPPORT_PSCI
 914         select LS1_DEEP_SLEEP
 915         select BOARD_EARLY_INIT_F
 916         imply SCSI
 917
 918 config TARGET_LS1021AIOT
 919         bool "Support ls1021aiot"
 920         select BOARD_LATE_INIT
 921         select CPU_V7
 922         select CPU_V7_HAS_NONSEC
 923         select CPU_V7_HAS_VIRT
 924         select SUPPORT_SPL
 925         select ARCH_LS1021A
 926         select ARCH_SUPPORT_PSCI
 927         imply SCSI
 928         help
 929           Support for Freescale LS1021AIOT platform.
 930           The LS1021A Freescale board (IOT) is a high-performance
 931           development platform that supports the QorIQ LS1021A
 932           Layerscape Architecture processor.
 933
 934 config TARGET_LS1043AQDS
 935         bool "Support ls1043aqds"
 936         select ARCH_LS1043A
 937         select ARM64
 938         select ARMV8_MULTIENTRY
 939         select BOARD_LATE_INIT
 940         select SUPPORT_SPL
 941         select BOARD_EARLY_INIT_F
 942         imply SCSI
 943         help
 944           Support for Freescale LS1043AQDS platform.
 945
 946 config TARGET_LS1043ARDB
 947         bool "Support ls1043ardb"
 948         select ARCH_LS1043A
 949         select ARM64
 950         select ARMV8_MULTIENTRY
 951         select BOARD_LATE_INIT
 952         select SUPPORT_SPL
 953         select BOARD_EARLY_INIT_F
 954         imply SCSI
 955         help
 956           Support for Freescale LS1043ARDB platform.
 957
 958 config TARGET_LS1046AQDS
 959         bool "Support ls1046aqds"
 960         select ARCH_LS1046A
 961         select ARM64
 962         select ARMV8_MULTIENTRY
 963         select BOARD_LATE_INIT
 964         select SUPPORT_SPL
 965         select DM_SPI_FLASH if DM_SPI
 966         select BOARD_EARLY_INIT_F
 967         imply SCSI
 968         help
 969           Support for Freescale LS1046AQDS platform.
 970           The LS1046A Development System (QDS) is a high-performance
 971           development platform that supports the QorIQ LS1046A
 972           Layerscape Architecture processor.
 973
 974 config TARGET_LS1046ARDB
 975         bool "Support ls1046ardb"
 976         select ARCH_LS1046A
 977         select ARM64
 978         select ARMV8_MULTIENTRY
 979         select BOARD_LATE_INIT
 980         select SUPPORT_SPL
 981         select DM_SPI_FLASH if DM_SPI
 982         select POWER_MC34VR500
 983         select BOARD_EARLY_INIT_F
 984         imply SCSI
 985         help
 986           Support for Freescale LS1046ARDB platform.
 987           The LS1046A Reference Design Board (RDB) is a high-performance
 988           development platform that supports the QorIQ LS1046A
 989           Layerscape Architecture processor.
 990
 991 config TARGET_H2200
 992         bool "Support h2200"
 993         select CPU_PXA
 994
 995 config TARGET_ZIPITZ2
 996         bool "Support zipitz2"
 997         select CPU_PXA
 998
 999 config TARGET_COLIBRI_PXA270
1000         bool "Support colibri_pxa270"
1001         select CPU_PXA
1002
1003 config ARCH_UNIPHIER
1004         bool "Socionext UniPhier SoCs"
1005         select BOARD_LATE_INIT
1006         select CLK_UNIPHIER
1007         select DM
1008         select DM_GPIO
1009         select DM_I2C
1010         select DM_MMC
1011         select DM_RESET
1012         select DM_SERIAL
1013         select DM_USB
1014         select OF_CONTROL
1015         select OF_LIBFDT
1016         select PINCTRL
1017         select SPL_BOARD_INIT if SPL
1018         select SPL_DM if SPL
1019         select SPL_LIBCOMMON_SUPPORT if SPL
1020         select SPL_LIBGENERIC_SUPPORT if SPL
1021         select SPL_OF_CONTROL if SPL
1022         select SPL_PINCTRL if SPL
1023         select SUPPORT_SPL
1024         imply FAT_WRITE
1025         help
1026           Support for UniPhier SoC family developed by Socionext Inc.
1027           (formerly, System LSI Business Division of Panasonic Corporation)
1028
1029 config STM32
1030         bool "Support STM32"
1031         select CPU_V7M
1032         select DM
1033         select DM_SERIAL
1034         select SYS_THUMB_BUILD
1035
1036 config ARCH_STI
1037         bool "Support STMicrolectronics SoCs"
1038         select CPU_V7
1039         select DM
1040         select DM_SERIAL
1041         select BLK
1042         select DM_MMC
1043         select DM_RESET
1044         help
1045           Support for STMicroelectronics STiH407/10 SoC family.
1046           This SoC is used on Linaro 96Board STiH410-B2260
1047
1048 config ARCH_ROCKCHIP
1049         bool "Support Rockchip SoCs"
1050         select OF_CONTROL
1051         select BLK
1052         select DM
1053         select SPL_DM if SPL
1054         select SYS_MALLOC_F
1055         select SYS_THUMB_BUILD if !ARM64
1056         select SPL_SYS_MALLOC_SIMPLE if SPL
1057         select DM_GPIO
1058         select DM_I2C
1059         select DM_MMC
1060         select DM_MMC_OPS
1061         select DM_SERIAL
1062         select DM_SPI
1063         select DM_SPI_FLASH
1064         select DM_USB if USB
1065         select DM_PWM
1066         select DM_REGULATOR
1067         imply FAT_WRITE
1068
1069 config TARGET_THUNDERX_88XX
1070         bool "Support ThunderX 88xx"
1071         select ARM64
1072         select OF_CONTROL
1073         select SYS_CACHE_SHIFT_7
1074
1075 config ARCH_ASPEED
1076         bool "Support Aspeed SoCs"
1077         select OF_CONTROL
1078         select DM
1079
1080 endchoice
1081
1082 source "arch/arm/mach-aspeed/Kconfig"
1083
1084 source "arch/arm/mach-at91/Kconfig"
1085
1086 source "arch/arm/mach-bcm283x/Kconfig"
1087
1088 source "arch/arm/mach-davinci/Kconfig"
1089
1090 source "arch/arm/mach-exynos/Kconfig"
1091
1092 source "arch/arm/mach-highbank/Kconfig"
1093
1094 source "arch/arm/mach-integrator/Kconfig"
1095
1096 source "arch/arm/mach-keystone/Kconfig"
1097
1098 source "arch/arm/mach-kirkwood/Kconfig"
1099
1100 source "arch/arm/mach-mvebu/Kconfig"
1101
1102 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1103
1104 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1105
1106 source "arch/arm/mach-imx/mx7/Kconfig"
1107
1108 source "arch/arm/mach-imx/mx6/Kconfig"
1109
1110 source "arch/arm/mach-imx/mx5/Kconfig"
1111
1112 source "arch/arm/mach-omap2/Kconfig"
1113
1114 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1115
1116 source "arch/arm/mach-orion5x/Kconfig"
1117
1118 source "arch/arm/mach-rmobile/Kconfig"
1119
1120 source "arch/arm/mach-meson/Kconfig"
1121
1122 source "arch/arm/mach-rockchip/Kconfig"
1123
1124 source "arch/arm/mach-s5pc1xx/Kconfig"
1125
1126 source "arch/arm/mach-snapdragon/Kconfig"
1127
1128 source "arch/arm/mach-socfpga/Kconfig"
1129
1130 source "arch/arm/mach-sti/Kconfig"
1131
1132 source "arch/arm/mach-stm32/Kconfig"
1133
1134 source "arch/arm/mach-sunxi/Kconfig"
1135
1136 source "arch/arm/mach-tegra/Kconfig"
1137
1138 source "arch/arm/mach-uniphier/Kconfig"
1139
1140 source "arch/arm/cpu/armv7/vf610/Kconfig"
1141
1142 source "arch/arm/mach-zynq/Kconfig"
1143
1144 source "arch/arm/cpu/armv7/Kconfig"
1145
1146 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1147
1148 source "arch/arm/cpu/armv8/Kconfig"
1149
1150 source "arch/arm/mach-imx/Kconfig"
1151
1152 source "board/aries/m28evk/Kconfig"
1153 source "board/bosch/shc/Kconfig"
1154 source "board/CarMediaLab/flea3/Kconfig"
1155 source "board/Marvell/aspenite/Kconfig"
1156 source "board/Marvell/gplugd/Kconfig"
1157 source "board/armadeus/apf27/Kconfig"
1158 source "board/armltd/vexpress/Kconfig"
1159 source "board/armltd/vexpress64/Kconfig"
1160 source "board/bluegiga/apx4devkit/Kconfig"
1161 source "board/broadcom/bcm23550_w1d/Kconfig"
1162 source "board/broadcom/bcm28155_ap/Kconfig"
1163 source "board/broadcom/bcmcygnus/Kconfig"
1164 source "board/broadcom/bcmnsp/Kconfig"
1165 source "board/broadcom/bcmns2/Kconfig"
1166 source "board/cavium/thunderx/Kconfig"
1167 source "board/cirrus/edb93xx/Kconfig"
1168 source "board/creative/xfi3/Kconfig"
1169 source "board/freescale/ls2080a/Kconfig"
1170 source "board/freescale/ls2080aqds/Kconfig"
1171 source "board/freescale/ls2080ardb/Kconfig"
1172 source "board/freescale/ls1021aqds/Kconfig"
1173 source "board/freescale/ls1043aqds/Kconfig"
1174 source "board/freescale/ls1021atwr/Kconfig"
1175 source "board/freescale/ls1021aiot/Kconfig"
1176 source "board/freescale/ls1046aqds/Kconfig"
1177 source "board/freescale/ls1043ardb/Kconfig"
1178 source "board/freescale/ls1046ardb/Kconfig"
1179 source "board/freescale/ls1012aqds/Kconfig"
1180 source "board/freescale/ls1012ardb/Kconfig"
1181 source "board/freescale/ls1012afrdm/Kconfig"
1182 source "board/freescale/mx23evk/Kconfig"
1183 source "board/freescale/mx25pdk/Kconfig"
1184 source "board/freescale/mx28evk/Kconfig"
1185 source "board/freescale/mx31ads/Kconfig"
1186 source "board/freescale/mx31pdk/Kconfig"
1187 source "board/freescale/mx35pdk/Kconfig"
1188 source "board/freescale/s32v234evb/Kconfig"
1189 source "board/gdsys/a38x/Kconfig"
1190 source "board/grinn/chiliboard/Kconfig"
1191 source "board/gumstix/pepper/Kconfig"
1192 source "board/h2200/Kconfig"
1193 source "board/hisilicon/hikey/Kconfig"
1194 source "board/hisilicon/poplar/Kconfig"
1195 source "board/imx31_phycore/Kconfig"
1196 source "board/isee/igep003x/Kconfig"
1197 source "board/olimex/mx23_olinuxino/Kconfig"
1198 source "board/phytec/pcm051/Kconfig"
1199 source "board/ppcag/bg0900/Kconfig"
1200 source "board/sandisk/sansa_fuze_plus/Kconfig"
1201 source "board/schulercontrol/sc_sps_1/Kconfig"
1202 source "board/silica/pengwyn/Kconfig"
1203 source "board/spear/spear300/Kconfig"
1204 source "board/spear/spear310/Kconfig"
1205 source "board/spear/spear320/Kconfig"
1206 source "board/spear/spear600/Kconfig"
1207 source "board/spear/x600/Kconfig"
1208 source "board/st/stv0991/Kconfig"
1209 source "board/syteco/zmx25/Kconfig"
1210 source "board/tcl/sl50/Kconfig"
1211 source "board/birdland/bav335x/Kconfig"
1212 source "board/timll/devkit3250/Kconfig"
1213 source "board/toradex/colibri_pxa270/Kconfig"
1214 source "board/technologic/ts4600/Kconfig"
1215 source "board/vscom/baltos/Kconfig"
1216 source "board/woodburn/Kconfig"
1217 source "board/work-microwave/work_92105/Kconfig"
1218 source "board/zipitz2/Kconfig"
1219
1220 source "arch/arm/Kconfig.debug"
1221
1222 endmenu