arch/arm/Kconfig

   1 menu "ARM architecture"
   2         depends on ARM
   3
   4 config SYS_ARCH
   5         default "arm"
   6
   7 config ARM64
   8         bool
   9         select PHYS_64BIT
  10         select SYS_CACHE_SHIFT_6
  11
  12 config DMA_ADDR_T_64BIT
  13         bool
  14         default y if ARM64
  15
  16 config HAS_VBAR
  17         bool
  18
  19 config HAS_THUMB2
  20         bool
  21
  22 # If set, the workarounds for these ARM errata are applied early during U-Boot
  23 # startup. Note that in general these options force the workarounds to be
  24 # applied; no CPU-type/version detection exists, unlike the similar options in
  25 # the Linux kernel. Do not set these options unless they apply!  Also note that
  26 # the following can be machine specific errata. These do have ability to
  27 # provide rudimentary version and machine specific checks, but expect no
  28 # product checks:
  29 # CONFIG_ARM_ERRATA_430973
  30 # CONFIG_ARM_ERRATA_454179
  31 # CONFIG_ARM_ERRATA_621766
  32 # CONFIG_ARM_ERRATA_798870
  33 # CONFIG_ARM_ERRATA_801819
  34 config ARM_ERRATA_430973
  35         bool
  36
  37 config ARM_ERRATA_454179
  38         bool
  39
  40 config ARM_ERRATA_621766
  41         bool
  42
  43 config ARM_ERRATA_716044
  44         bool
  45
  46 config ARM_ERRATA_725233
  47         bool
  48
  49 config ARM_ERRATA_742230
  50         bool
  51
  52 config ARM_ERRATA_743622
  53         bool
  54
  55 config ARM_ERRATA_751472
  56         bool
  57
  58 config ARM_ERRATA_761320
  59         bool
  60
  61 config ARM_ERRATA_773022
  62         bool
  63
  64 config ARM_ERRATA_774769
  65         bool
  66
  67 config ARM_ERRATA_794072
  68         bool
  69
  70 config ARM_ERRATA_798870
  71         bool
  72
  73 config ARM_ERRATA_801819
  74         bool
  75
  76 config ARM_ERRATA_826974
  77         bool
  78
  79 config ARM_ERRATA_828024
  80         bool
  81
  82 config ARM_ERRATA_829520
  83         bool
  84
  85 config ARM_ERRATA_833069
  86         bool
  87
  88 config ARM_ERRATA_833471
  89         bool
  90
  91 config ARM_ERRATA_852421
  92         bool
  93
  94 config ARM_ERRATA_852423
  95         bool
  96
  97 config CPU_ARM720T
  98         bool
  99         select SYS_CACHE_SHIFT_5
 100
 101 config CPU_ARM920T
 102         bool
 103         select SYS_CACHE_SHIFT_5
 104
 105 config CPU_ARM926EJS
 106         bool
 107         select SYS_CACHE_SHIFT_5
 108
 109 config CPU_ARM946ES
 110         bool
 111         select SYS_CACHE_SHIFT_5
 112
 113 config CPU_ARM1136
 114         bool
 115         select SYS_CACHE_SHIFT_5
 116
 117 config CPU_ARM1176
 118         bool
 119         select HAS_VBAR
 120         select SYS_CACHE_SHIFT_5
 121
 122 config CPU_V7
 123         bool
 124         select HAS_VBAR
 125         select HAS_THUMB2
 126         select SYS_CACHE_SHIFT_6
 127
 128 config CPU_V7M
 129         bool
 130         select HAS_THUMB2
 131         select SYS_CACHE_SHIFT_5
 132
 133 config CPU_PXA
 134         bool
 135         select SYS_CACHE_SHIFT_5
 136
 137 config CPU_SA1100
 138         bool
 139         select SYS_CACHE_SHIFT_5
 140
 141 config SYS_CPU
 142         default "arm720t" if CPU_ARM720T
 143         default "arm920t" if CPU_ARM920T
 144         default "arm926ejs" if CPU_ARM926EJS
 145         default "arm946es" if CPU_ARM946ES
 146         default "arm1136" if CPU_ARM1136
 147         default "arm1176" if CPU_ARM1176
 148         default "armv7" if CPU_V7
 149         default "armv7m" if CPU_V7M
 150         default "pxa" if CPU_PXA
 151         default "sa1100" if CPU_SA1100
 152         default "armv8" if ARM64
 153
 154 config SYS_ARM_ARCH
 155         int
 156         default 4 if CPU_ARM720T
 157         default 4 if CPU_ARM920T
 158         default 5 if CPU_ARM926EJS
 159         default 5 if CPU_ARM946ES
 160         default 6 if CPU_ARM1136
 161         default 6 if CPU_ARM1176
 162         default 7 if CPU_V7
 163         default 7 if CPU_V7M
 164         default 5 if CPU_PXA
 165         default 4 if CPU_SA1100
 166         default 8 if ARM64
 167
 168 config SYS_CACHE_SHIFT_5
 169         bool
 170
 171 config SYS_CACHE_SHIFT_6
 172         bool
 173
 174 config SYS_CACHE_SHIFT_7
 175         bool
 176
 177 config SYS_CACHELINE_SIZE
 178         int
 179         default 128 if SYS_CACHE_SHIFT_7
 180         default 64 if SYS_CACHE_SHIFT_6
 181         default 32 if SYS_CACHE_SHIFT_5
 182
 183 config ARM_SMCCC
 184         bool "Support for ARM SMC Calling Convention (SMCCC)"
 185         depends on CPU_V7 || ARM64
 186         select ARM_PSCI_FW
 187         help
 188           Say Y here if you want to enable ARM SMC Calling Convention.
 189           This should be enabled if U-Boot needs to communicate with system
 190           firmware (for example, PSCI) according to SMCCC.
 191
 192 config SEMIHOSTING
 193         bool "support boot from semihosting"
 194         help
 195           In emulated environments, semihosting is a way for
 196           the hosted environment to call out to the emulator to
 197           retrieve files from the host machine.
 198
 199 config SYS_THUMB_BUILD
 200         bool "Build U-Boot using the Thumb instruction set"
 201         depends on !ARM64
 202         help
 203            Use this flag to build U-Boot using the Thumb instruction set for
 204            ARM architectures. Thumb instruction set provides better code
 205            density. For ARM architectures that support Thumb2 this flag will
 206            result in Thumb2 code generated by GCC.
 207
 208 config SPL_SYS_THUMB_BUILD
 209         bool "Build SPL using the Thumb instruction set"
 210         default y if SYS_THUMB_BUILD
 211         depends on !ARM64
 212         help
 213            Use this flag to build SPL using the Thumb instruction set for
 214            ARM architectures. Thumb instruction set provides better code
 215            density. For ARM architectures that support Thumb2 this flag will
 216            result in Thumb2 code generated by GCC.
 217
 218 config SYS_L2CACHE_OFF
 219         bool "L2cache off"
 220         help
 221           If SoC does not support L2CACHE or one do not want to enable
 222           L2CACHE, choose this option.
 223
 224 config ENABLE_ARM_SOC_BOOT0_HOOK
 225         bool "prepare BOOT0 header"
 226         help
 227           If the SoC's BOOT0 requires a header area filled with (magic)
 228           values, then choose this option, and create a define called
 229           ARM_SOC_BOOT0_HOOK which contains the required assembler
 230           preprocessor code.
 231
 232 config ARM_CORTEX_CPU_IS_UP
 233         bool
 234         default n
 235
 236 config USE_ARCH_MEMCPY
 237         bool "Use an assembly optimized implementation of memcpy"
 238         default y
 239         depends on !ARM64
 240         help
 241           Enable the generation of an optimized version of memcpy.
 242           Such implementation may be faster under some conditions
 243           but may increase the binary size.
 244
 245 config SPL_USE_ARCH_MEMCPY
 246         bool "Use an assembly optimized implementation of memcpy"
 247         default y if USE_ARCH_MEMCPY
 248         depends on !ARM64
 249         help
 250           Enable the generation of an optimized version of memcpy.
 251           Such implementation may be faster under some conditions
 252           but may increase the binary size.
 253
 254 config USE_ARCH_MEMSET
 255         bool "Use an assembly optimized implementation of memset"
 256         default y
 257         depends on !ARM64
 258         help
 259           Enable the generation of an optimized version of memset.
 260           Such implementation may be faster under some conditions
 261           but may increase the binary size.
 262
 263 config SPL_USE_ARCH_MEMSET
 264         bool "Use an assembly optimized implementation of memset"
 265         default y if USE_ARCH_MEMSET
 266         depends on !ARM64
 267         help
 268           Enable the generation of an optimized version of memset.
 269           Such implementation may be faster under some conditions
 270           but may increase the binary size.
 271
 272 config ARM64_SUPPORT_AARCH32
 273         bool "ARM64 system support AArch32 execution state"
 274         default y if ARM64 && !TARGET_THUNDERX_88XX
 275         help
 276           This ARM64 system supports AArch32 execution state.
 277
 278 choice
 279         prompt "Target select"
 280         default TARGET_HIKEY
 281
 282 config ARCH_AT91
 283         bool "Atmel AT91"
 284         select SPL_BOARD_INIT if SPL
 285
 286 config TARGET_EDB93XX
 287         bool "Support edb93xx"
 288         select CPU_ARM920T
 289
 290 config TARGET_ASPENITE
 291         bool "Support aspenite"
 292         select CPU_ARM926EJS
 293
 294 config TARGET_GPLUGD
 295         bool "Support gplugd"
 296         select CPU_ARM926EJS
 297
 298 config ARCH_DAVINCI
 299         bool "TI DaVinci"
 300         select CPU_ARM926EJS
 301         help
 302           Support for TI's DaVinci platform.
 303
 304 config KIRKWOOD
 305         bool "Marvell Kirkwood"
 306         select CPU_ARM926EJS
 307         select BOARD_EARLY_INIT_F
 308         select ARCH_MISC_INIT
 309
 310 config ARCH_MVEBU
 311         bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 312         select OF_CONTROL
 313         select OF_SEPARATE
 314         select DM
 315         select DM_ETH
 316         select DM_SERIAL
 317         select DM_SPI
 318         select DM_SPI_FLASH
 319
 320 config TARGET_DEVKIT3250
 321         bool "Support devkit3250"
 322         select CPU_ARM926EJS
 323         select SUPPORT_SPL
 324
 325 config TARGET_WORK_92105
 326         bool "Support work_92105"
 327         select CPU_ARM926EJS
 328         select SUPPORT_SPL
 329
 330 config TARGET_MX25PDK
 331         bool "Support mx25pdk"
 332         select BOARD_LATE_INIT
 333         select CPU_ARM926EJS
 334         select BOARD_EARLY_INIT_F
 335
 336 config TARGET_ZMX25
 337         bool "Support zmx25"
 338         select BOARD_LATE_INIT
 339         select CPU_ARM926EJS
 340
 341 config TARGET_APF27
 342         bool "Support apf27"
 343         select CPU_ARM926EJS
 344         select SUPPORT_SPL
 345
 346 config TARGET_APX4DEVKIT
 347         bool "Support apx4devkit"
 348         select CPU_ARM926EJS
 349         select SUPPORT_SPL
 350
 351 config TARGET_XFI3
 352         bool "Support xfi3"
 353         select CPU_ARM926EJS
 354         select SUPPORT_SPL
 355
 356 config TARGET_M28EVK
 357         bool "Support m28evk"
 358         select CPU_ARM926EJS
 359         select SUPPORT_SPL
 360
 361 config TARGET_MX23EVK
 362         bool "Support mx23evk"
 363         select CPU_ARM926EJS
 364         select SUPPORT_SPL
 365         select BOARD_EARLY_INIT_F
 366
 367 config TARGET_MX28EVK
 368         bool "Support mx28evk"
 369         select CPU_ARM926EJS
 370         select SUPPORT_SPL
 371         select BOARD_EARLY_INIT_F
 372
 373 config TARGET_MX23_OLINUXINO
 374         bool "Support mx23_olinuxino"
 375         select CPU_ARM926EJS
 376         select SUPPORT_SPL
 377         select BOARD_EARLY_INIT_F
 378
 379 config TARGET_BG0900
 380         bool "Support bg0900"
 381         select CPU_ARM926EJS
 382         select SUPPORT_SPL
 383
 384 config TARGET_SANSA_FUZE_PLUS
 385         bool "Support sansa_fuze_plus"
 386         select CPU_ARM926EJS
 387         select SUPPORT_SPL
 388
 389 config TARGET_SC_SPS_1
 390         bool "Support sc_sps_1"
 391         select CPU_ARM926EJS
 392         select SUPPORT_SPL
 393
 394 config ORION5X
 395         bool "Marvell Orion"
 396         select CPU_ARM926EJS
 397
 398 config TARGET_SPEAR300
 399         bool "Support spear300"
 400         select CPU_ARM926EJS
 401         select BOARD_EARLY_INIT_F
 402
 403 config TARGET_SPEAR310
 404         bool "Support spear310"
 405         select CPU_ARM926EJS
 406         select BOARD_EARLY_INIT_F
 407
 408 config TARGET_SPEAR320
 409         bool "Support spear320"
 410         select CPU_ARM926EJS
 411         select BOARD_EARLY_INIT_F
 412
 413 config TARGET_SPEAR600
 414         bool "Support spear600"
 415         select CPU_ARM926EJS
 416         select BOARD_EARLY_INIT_F
 417
 418 config TARGET_STV0991
 419         bool "Support stv0991"
 420         select CPU_V7
 421         select DM
 422         select DM_SERIAL
 423         select DM_SPI
 424         select DM_SPI_FLASH
 425         select SPI_FLASH
 426
 427 config TARGET_X600
 428         bool "Support x600"
 429         select BOARD_LATE_INIT
 430         select CPU_ARM926EJS
 431         select SUPPORT_SPL
 432
 433 config TARGET_IMX31_PHYCORE
 434         bool "Support imx31_phycore_eet"
 435         select CPU_ARM1136
 436         select BOARD_EARLY_INIT_F
 437
 438 config TARGET_IMX31_PHYCORE_EET
 439         bool "Support imx31_phycore_eet"
 440         select BOARD_LATE_INIT
 441         select CPU_ARM1136
 442         select BOARD_EARLY_INIT_F
 443
 444 config TARGET_MX31ADS
 445         bool "Support mx31ads"
 446         select CPU_ARM1136
 447         select BOARD_EARLY_INIT_F
 448
 449 config TARGET_MX31PDK
 450         bool "Support mx31pdk"
 451         select BOARD_LATE_INIT
 452         select CPU_ARM1136
 453         select SUPPORT_SPL
 454         select BOARD_EARLY_INIT_F
 455
 456 config TARGET_WOODBURN
 457         bool "Support woodburn"
 458         select CPU_ARM1136
 459
 460 config TARGET_WOODBURN_SD
 461         bool "Support woodburn_sd"
 462         select CPU_ARM1136
 463         select SUPPORT_SPL
 464
 465 config TARGET_FLEA3
 466         bool "Support flea3"
 467         select CPU_ARM1136
 468
 469 config TARGET_MX35PDK
 470         bool "Support mx35pdk"
 471         select BOARD_LATE_INIT
 472         select CPU_ARM1136
 473
 474 config ARCH_BCM283X
 475         bool "Broadcom BCM283X family"
 476         select DM
 477         select DM_SERIAL
 478         select DM_GPIO
 479         select OF_CONTROL
 480
 481 config TARGET_VEXPRESS_CA15_TC2
 482         bool "Support vexpress_ca15_tc2"
 483         select CPU_V7
 484         select CPU_V7_HAS_NONSEC
 485         select CPU_V7_HAS_VIRT
 486
 487 config TARGET_VEXPRESS_CA5X2
 488         bool "Support vexpress_ca5x2"
 489         select CPU_V7
 490
 491 config TARGET_VEXPRESS_CA9X4
 492         bool "Support vexpress_ca9x4"
 493         select CPU_V7
 494
 495 config TARGET_BCM23550_W1D
 496         bool "Support bcm23550_w1d"
 497         select CPU_V7
 498
 499 config TARGET_BCM28155_AP
 500         bool "Support bcm28155_ap"
 501         select CPU_V7
 502
 503 config TARGET_BCMCYGNUS
 504         bool "Support bcmcygnus"
 505         select CPU_V7
 506
 507 config TARGET_BCMNSP
 508         bool "Support bcmnsp"
 509         select CPU_V7
 510
 511 config TARGET_BCMNS2
 512         bool "Support Broadcom Northstar2"
 513         select ARM64
 514         help
 515           Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
 516           ARMv8 Cortex-A57 processors targeting a broad range of networking
 517           applications
 518
 519 config ARCH_EXYNOS
 520         bool "Samsung EXYNOS"
 521         select DM
 522         select DM_I2C
 523         select DM_SPI_FLASH
 524         select DM_SERIAL
 525         select DM_SPI
 526         select DM_GPIO
 527         select DM_KEYBOARD
 528
 529 config ARCH_S5PC1XX
 530         bool "Samsung S5PC1XX"
 531         select CPU_V7
 532         select DM
 533         select DM_SERIAL
 534         select DM_GPIO
 535         select DM_I2C
 536
 537 config ARCH_HIGHBANK
 538         bool "Calxeda Highbank"
 539         select CPU_V7
 540
 541 config ARCH_INTEGRATOR
 542         bool "ARM Ltd. Integrator family"
 543         select DM
 544         select DM_SERIAL
 545
 546 config ARCH_KEYSTONE
 547         bool "TI Keystone"
 548         select CPU_V7
 549         select SUPPORT_SPL
 550         select SYS_THUMB_BUILD
 551         select CMD_POWEROFF
 552         imply FIT
 553
 554 config ARCH_OMAP2PLUS
 555         bool "TI OMAP2+"
 556         select CPU_V7
 557         select SPL_BOARD_INIT if SPL
 558         select SUPPORT_SPL
 559         imply FIT
 560
 561 config ARCH_MESON
 562         bool "Amlogic Meson"
 563         help
 564           Support for the Meson SoC family developed by Amlogic Inc.,
 565           targeted at media players and tablet computers. We currently
 566           support the S905 (GXBaby) 64-bit SoC.
 567
 568 config ARCH_MX7ULP
 569         bool "NXP MX7ULP"
 570         select CPU_V7
 571         select ROM_UNIFIED_SECTIONS
 572
 573 config ARCH_MX7
 574         bool "Freescale MX7"
 575         select CPU_V7
 576         select SYS_FSL_HAS_SEC if SECURE_BOOT
 577         select SYS_FSL_SEC_COMPAT_4
 578         select SYS_FSL_SEC_LE
 579         select BOARD_EARLY_INIT_F
 580         select ARCH_MISC_INIT
 581
 582 config ARCH_MX6
 583         bool "Freescale MX6"
 584         select CPU_V7
 585         select SYS_FSL_HAS_SEC if SECURE_BOOT
 586         select SYS_FSL_SEC_COMPAT_4
 587         select SYS_FSL_SEC_LE
 588         select SYS_THUMB_BUILD if SPL
 589
 590 config ARCH_MX5
 591         bool "Freescale MX5"
 592         select CPU_V7
 593         select BOARD_EARLY_INIT_F
 594
 595 config ARCH_RMOBILE
 596         bool "Renesas ARM SoCs"
 597         select DM
 598         select DM_SERIAL
 599         select BOARD_EARLY_INIT_F
 600         imply SYS_THUMB_BUILD
 601
 602 config TARGET_S32V234EVB
 603         bool "Support s32v234evb"
 604         select ARM64
 605         select SYS_FSL_ERRATUM_ESDHC111
 606
 607 config ARCH_SNAPDRAGON
 608         bool "Qualcomm Snapdragon SoCs"
 609         select ARM64
 610         select DM
 611         select DM_GPIO
 612         select DM_SERIAL
 613         select SPMI
 614         select OF_CONTROL
 615         select OF_SEPARATE
 616
 617 config ARCH_SOCFPGA
 618         bool "Altera SOCFPGA family"
 619         select CPU_V7
 620         select SUPPORT_SPL
 621         select OF_CONTROL
 622         select SPL_OF_CONTROL
 623         select DM
 624         select DM_SPI_FLASH
 625         select DM_SPI
 626         select ENABLE_ARM_SOC_BOOT0_HOOK
 627         select ARCH_EARLY_INIT_R
 628         select ARCH_MISC_INIT
 629         select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 630         select SYS_THUMB_BUILD
 631
 632 config ARCH_SUNXI
 633         bool "Support sunxi (Allwinner) SoCs"
 634         select CMD_GPIO
 635         select CMD_MMC if MMC
 636         select CMD_USB if DISTRO_DEFAULTS
 637         select DM
 638         select DM_ETH
 639         select DM_GPIO
 640         select DM_KEYBOARD
 641         select DM_SERIAL
 642         select DM_USB if DISTRO_DEFAULTS
 643         select OF_BOARD_SETUP
 644         select OF_CONTROL
 645         select OF_SEPARATE
 646         select SPL_STACK_R if SUPPORT_SPL
 647         select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
 648         select SYS_NS16550
 649         select SPL_SYS_THUMB_BUILD if !ARM64
 650         select USB if DISTRO_DEFAULTS
 651         select USB_STORAGE if DISTRO_DEFAULTS
 652         select USB_KEYBOARD if DISTRO_DEFAULTS
 653         select USE_TINY_PRINTF
 654         imply PRE_CONSOLE_BUFFER
 655         imply SPL_GPIO_SUPPORT
 656         imply SPL_LIBCOMMON_SUPPORT
 657         imply SPL_LIBDISK_SUPPORT
 658         imply SPL_LIBGENERIC_SUPPORT
 659         imply SPL_MMC_SUPPORT if MMC
 660         imply SPL_POWER_SUPPORT
 661         imply SPL_SERIAL_SUPPORT
 662
 663 config TARGET_TS4600
 664         bool "Support TS4600"
 665         select CPU_ARM926EJS
 666         select SUPPORT_SPL
 667
 668 config ARCH_VF610
 669         bool "Freescale Vybrid"
 670         select CPU_V7
 671         select SYS_FSL_ERRATUM_ESDHC111
 672
 673 config ARCH_ZYNQ
 674         bool "Xilinx Zynq Platform"
 675         select BOARD_LATE_INIT
 676         select CPU_V7
 677         select SUPPORT_SPL
 678         select OF_CONTROL
 679         select SPL_BOARD_INIT if SPL
 680         select SPL_OF_CONTROL if SPL
 681         select DM
 682         select DM_ETH
 683         select DM_GPIO
 684         select SPL_DM if SPL
 685         select DM_MMC
 686         select DM_MMC_OPS
 687         select DM_SPI
 688         select DM_SERIAL
 689         select DM_SPI_FLASH
 690         select SPL_SEPARATE_BSS if SPL
 691         select DM_USB if USB
 692         select BLK
 693         select CLK
 694         select SPL_CLK
 695         select CLK_ZYNQ
 696         imply CMD_CLK
 697
 698 config ARCH_ZYNQMP
 699         bool "Support Xilinx ZynqMP Platform"
 700         select ARM64
 701         select BOARD_LATE_INIT
 702         select DM
 703         select OF_CONTROL
 704         select DM_SERIAL
 705         select SUPPORT_SPL
 706         select CLK
 707         select SPL_BOARD_INIT if SPL
 708         select SPL_CLK
 709         select DM_USB if USB
 710
 711 config TEGRA
 712         bool "NVIDIA Tegra"
 713
 714 config TARGET_VEXPRESS64_AEMV8A
 715         bool "Support vexpress_aemv8a"
 716         select ARM64
 717
 718 config TARGET_VEXPRESS64_BASE_FVP
 719         bool "Support Versatile Express ARMv8a FVP BASE model"
 720         select ARM64
 721         select SEMIHOSTING
 722
 723 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 724         bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 725         select ARM64
 726         help
 727           This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 728           the default config to allow the user to load the images directly into
 729           DRAM using model parameters rather than by using semi-hosting to load
 730           the files from the host filesystem.
 731
 732 config TARGET_VEXPRESS64_JUNO
 733         bool "Support Versatile Express Juno Development Platform"
 734         select ARM64
 735
 736 config TARGET_LS2080A_EMU
 737         bool "Support ls2080a_emu"
 738         select ARCH_LS2080A
 739         select ARM64
 740         select ARMV8_MULTIENTRY
 741         select ARCH_MISC_INIT
 742         help
 743           Support for Freescale LS2080A_EMU platform
 744           The LS2080A Development System (EMULATOR) is a pre silicon
 745           development platform that supports the QorIQ LS2080A
 746           Layerscape Architecture processor.
 747
 748 config TARGET_LS2080A_SIMU
 749         bool "Support ls2080a_simu"
 750         select ARCH_LS2080A
 751         select ARM64
 752         select ARMV8_MULTIENTRY
 753         select ARCH_MISC_INIT
 754         help
 755           Support for Freescale LS2080A_SIMU platform
 756           The LS2080A Development System (QDS) is a pre silicon
 757           development platform that supports the QorIQ LS2080A
 758           Layerscape Architecture processor.
 759
 760 config TARGET_LS2080AQDS
 761         bool "Support ls2080aqds"
 762         select ARCH_LS2080A
 763         select ARM64
 764         select ARMV8_MULTIENTRY
 765         select BOARD_LATE_INIT
 766         select SUPPORT_SPL
 767         select ARCH_MISC_INIT
 768         help
 769           Support for Freescale LS2080AQDS platform
 770           The LS2080A Development System (QDS) is a high-performance
 771           development platform that supports the QorIQ LS2080A
 772           Layerscape Architecture processor.
 773
 774 config TARGET_LS2080ARDB
 775         bool "Support ls2080ardb"
 776         select ARCH_LS2080A
 777         select ARM64
 778         select ARMV8_MULTIENTRY
 779         select BOARD_LATE_INIT
 780         select SUPPORT_SPL
 781         select ARCH_MISC_INIT
 782         help
 783           Support for Freescale LS2080ARDB platform.
 784           The LS2080A Reference design board (RDB) is a high-performance
 785           development platform that supports the QorIQ LS2080A
 786           Layerscape Architecture processor.
 787
 788 config TARGET_HIKEY
 789         bool "Support HiKey 96boards Consumer Edition Platform"
 790         select ARM64
 791         select DM
 792         select DM_GPIO
 793         select DM_SERIAL
 794         select OF_CONTROL
 795           help
 796           Support for HiKey 96boards platform. It features a HI6220
 797           SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 798
 799 config TARGET_LS1012AQDS
 800         bool "Support ls1012aqds"
 801         select ARCH_LS1012A
 802         select ARM64
 803         select BOARD_LATE_INIT
 804         help
 805           Support for Freescale LS1012AQDS platform.
 806           The LS1012A Development System (QDS) is a high-performance
 807           development platform that supports the QorIQ LS1012A
 808           Layerscape Architecture processor.
 809
 810 config TARGET_LS1012ARDB
 811         bool "Support ls1012ardb"
 812         select ARCH_LS1012A
 813         select ARM64
 814         select BOARD_LATE_INIT
 815         help
 816           Support for Freescale LS1012ARDB platform.
 817           The LS1012A Reference design board (RDB) is a high-performance
 818           development platform that supports the QorIQ LS1012A
 819           Layerscape Architecture processor.
 820
 821 config TARGET_LS1012AFRDM
 822         bool "Support ls1012afrdm"
 823         select ARCH_LS1012A
 824         select ARM64
 825         help
 826           Support for Freescale LS1012AFRDM platform.
 827           The LS1012A Freedom  board (FRDM) is a high-performance
 828           development platform that supports the QorIQ LS1012A
 829           Layerscape Architecture processor.
 830
 831 config TARGET_LS1021AQDS
 832         bool "Support ls1021aqds"
 833         select BOARD_LATE_INIT
 834         select CPU_V7
 835         select CPU_V7_HAS_NONSEC
 836         select CPU_V7_HAS_VIRT
 837         select SUPPORT_SPL
 838         select ARCH_LS1021A
 839         select ARCH_SUPPORT_PSCI
 840         select LS1_DEEP_SLEEP
 841         select SYS_FSL_DDR
 842         select BOARD_EARLY_INIT_F
 843
 844 config TARGET_LS1021ATWR
 845         bool "Support ls1021atwr"
 846         select BOARD_LATE_INIT
 847         select CPU_V7
 848         select CPU_V7_HAS_NONSEC
 849         select CPU_V7_HAS_VIRT
 850         select SUPPORT_SPL
 851         select ARCH_LS1021A
 852         select ARCH_SUPPORT_PSCI
 853         select LS1_DEEP_SLEEP
 854         select BOARD_EARLY_INIT_F
 855
 856 config TARGET_LS1021AIOT
 857         bool "Support ls1021aiot"
 858         select BOARD_LATE_INIT
 859         select CPU_V7
 860         select CPU_V7_HAS_NONSEC
 861         select CPU_V7_HAS_VIRT
 862         select SUPPORT_SPL
 863         select ARCH_LS1021A
 864         select ARCH_SUPPORT_PSCI
 865         help
 866           Support for Freescale LS1021AIOT platform.
 867           The LS1021A Freescale board (IOT) is a high-performance
 868           development platform that supports the QorIQ LS1021A
 869           Layerscape Architecture processor.
 870
 871 config TARGET_LS1043AQDS
 872         bool "Support ls1043aqds"
 873         select ARCH_LS1043A
 874         select ARM64
 875         select ARMV8_MULTIENTRY
 876         select BOARD_LATE_INIT
 877         select SUPPORT_SPL
 878         select BOARD_EARLY_INIT_F
 879         help
 880           Support for Freescale LS1043AQDS platform.
 881
 882 config TARGET_LS1043ARDB
 883         bool "Support ls1043ardb"
 884         select ARCH_LS1043A
 885         select ARM64
 886         select ARMV8_MULTIENTRY
 887         select BOARD_LATE_INIT
 888         select SUPPORT_SPL
 889         select BOARD_EARLY_INIT_F
 890         help
 891           Support for Freescale LS1043ARDB platform.
 892
 893 config TARGET_LS1046AQDS
 894         bool "Support ls1046aqds"
 895         select ARCH_LS1046A
 896         select ARM64
 897         select ARMV8_MULTIENTRY
 898         select BOARD_LATE_INIT
 899         select SUPPORT_SPL
 900         select DM_SPI_FLASH if DM_SPI
 901         select BOARD_EARLY_INIT_F
 902         help
 903           Support for Freescale LS1046AQDS platform.
 904           The LS1046A Development System (QDS) is a high-performance
 905           development platform that supports the QorIQ LS1046A
 906           Layerscape Architecture processor.
 907
 908 config TARGET_LS1046ARDB
 909         bool "Support ls1046ardb"
 910         select ARCH_LS1046A
 911         select ARM64
 912         select ARMV8_MULTIENTRY
 913         select BOARD_LATE_INIT
 914         select SUPPORT_SPL
 915         select DM_SPI_FLASH if DM_SPI
 916         select POWER_MC34VR500
 917         select BOARD_EARLY_INIT_F
 918         help
 919           Support for Freescale LS1046ARDB platform.
 920           The LS1046A Reference Design Board (RDB) is a high-performance
 921           development platform that supports the QorIQ LS1046A
 922           Layerscape Architecture processor.
 923
 924 config TARGET_H2200
 925         bool "Support h2200"
 926         select CPU_PXA
 927
 928 config TARGET_ZIPITZ2
 929         bool "Support zipitz2"
 930         select CPU_PXA
 931
 932 config TARGET_COLIBRI_PXA270
 933         bool "Support colibri_pxa270"
 934         select CPU_PXA
 935
 936 config ARCH_UNIPHIER
 937         bool "Socionext UniPhier SoCs"
 938         select BOARD_LATE_INIT
 939         select CLK_UNIPHIER
 940         select DM
 941         select DM_GPIO
 942         select DM_I2C
 943         select DM_MMC
 944         select DM_RESET
 945         select DM_SERIAL
 946         select DM_USB
 947         select OF_CONTROL
 948         select OF_LIBFDT
 949         select PINCTRL
 950         select SPL_BOARD_INIT if SPL
 951         select SPL_DM if SPL
 952         select SPL_LIBCOMMON_SUPPORT if SPL
 953         select SPL_LIBGENERIC_SUPPORT if SPL
 954         select SPL_OF_CONTROL if SPL
 955         select SPL_PINCTRL if SPL
 956         select SUPPORT_SPL
 957         help
 958           Support for UniPhier SoC family developed by Socionext Inc.
 959           (formerly, System LSI Business Division of Panasonic Corporation)
 960
 961 config STM32
 962         bool "Support STM32"
 963         select CPU_V7M
 964         select DM
 965         select DM_SERIAL
 966         select SYS_THUMB_BUILD
 967
 968 config ARCH_STI
 969         bool "Support STMicrolectronics SoCs"
 970         select CPU_V7
 971         select DM
 972         select DM_SERIAL
 973         select BLK
 974         select DM_MMC
 975         select DM_RESET
 976         help
 977           Support for STMicroelectronics STiH407/10 SoC family.
 978           This SoC is used on Linaro 96Board STiH410-B2260
 979
 980 config ARCH_ROCKCHIP
 981         bool "Support Rockchip SoCs"
 982         select OF_CONTROL
 983         select BLK
 984         select DM
 985         select SPL_DM if SPL
 986         select SYS_MALLOC_F
 987         select SYS_THUMB_BUILD if !ARM64
 988         select SPL_SYS_MALLOC_SIMPLE if SPL
 989         select DM_GPIO
 990         select DM_I2C
 991         select DM_MMC
 992         select DM_MMC_OPS
 993         select DM_SERIAL
 994         select DM_SPI
 995         select DM_SPI_FLASH
 996         select DM_USB if USB
 997         select DM_PWM
 998         select DM_REGULATOR
 999
1000 config TARGET_THUNDERX_88XX
1001         bool "Support ThunderX 88xx"
1002         select ARM64
1003         select OF_CONTROL
1004         select SYS_CACHE_SHIFT_7
1005
1006 config ARCH_ASPEED
1007         bool "Support Aspeed SoCs"
1008         select OF_CONTROL
1009         select DM
1010
1011 endchoice
1012
1013 source "arch/arm/mach-aspeed/Kconfig"
1014
1015 source "arch/arm/mach-at91/Kconfig"
1016
1017 source "arch/arm/mach-bcm283x/Kconfig"
1018
1019 source "arch/arm/mach-davinci/Kconfig"
1020
1021 source "arch/arm/mach-exynos/Kconfig"
1022
1023 source "arch/arm/mach-highbank/Kconfig"
1024
1025 source "arch/arm/mach-integrator/Kconfig"
1026
1027 source "arch/arm/mach-keystone/Kconfig"
1028
1029 source "arch/arm/mach-kirkwood/Kconfig"
1030
1031 source "arch/arm/mach-mvebu/Kconfig"
1032
1033 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1034
1035 source "arch/arm/cpu/armv7/mx7ulp/Kconfig"
1036
1037 source "arch/arm/cpu/armv7/mx7/Kconfig"
1038
1039 source "arch/arm/cpu/armv7/mx6/Kconfig"
1040
1041 source "arch/arm/cpu/armv7/mx5/Kconfig"
1042
1043 source "arch/arm/mach-omap2/Kconfig"
1044
1045 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1046
1047 source "arch/arm/mach-orion5x/Kconfig"
1048
1049 source "arch/arm/mach-rmobile/Kconfig"
1050
1051 source "arch/arm/mach-meson/Kconfig"
1052
1053 source "arch/arm/mach-rockchip/Kconfig"
1054
1055 source "arch/arm/mach-s5pc1xx/Kconfig"
1056
1057 source "arch/arm/mach-snapdragon/Kconfig"
1058
1059 source "arch/arm/mach-socfpga/Kconfig"
1060
1061 source "arch/arm/mach-sti/Kconfig"
1062
1063 source "arch/arm/mach-stm32/Kconfig"
1064
1065 source "arch/arm/mach-sunxi/Kconfig"
1066
1067 source "arch/arm/mach-tegra/Kconfig"
1068
1069 source "arch/arm/mach-uniphier/Kconfig"
1070
1071 source "arch/arm/cpu/armv7/vf610/Kconfig"
1072
1073 source "arch/arm/mach-zynq/Kconfig"
1074
1075 source "arch/arm/cpu/armv7/Kconfig"
1076
1077 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1078
1079 source "arch/arm/cpu/armv8/Kconfig"
1080
1081 source "arch/arm/imx-common/Kconfig"
1082
1083 source "board/aries/m28evk/Kconfig"
1084 source "board/bosch/shc/Kconfig"
1085 source "board/CarMediaLab/flea3/Kconfig"
1086 source "board/Marvell/aspenite/Kconfig"
1087 source "board/Marvell/gplugd/Kconfig"
1088 source "board/armadeus/apf27/Kconfig"
1089 source "board/armltd/vexpress/Kconfig"
1090 source "board/armltd/vexpress64/Kconfig"
1091 source "board/bluegiga/apx4devkit/Kconfig"
1092 source "board/broadcom/bcm23550_w1d/Kconfig"
1093 source "board/broadcom/bcm28155_ap/Kconfig"
1094 source "board/broadcom/bcmcygnus/Kconfig"
1095 source "board/broadcom/bcmnsp/Kconfig"
1096 source "board/broadcom/bcmns2/Kconfig"
1097 source "board/cavium/thunderx/Kconfig"
1098 source "board/cirrus/edb93xx/Kconfig"
1099 source "board/creative/xfi3/Kconfig"
1100 source "board/freescale/ls2080a/Kconfig"
1101 source "board/freescale/ls2080aqds/Kconfig"
1102 source "board/freescale/ls2080ardb/Kconfig"
1103 source "board/freescale/ls1021aqds/Kconfig"
1104 source "board/freescale/ls1043aqds/Kconfig"
1105 source "board/freescale/ls1021atwr/Kconfig"
1106 source "board/freescale/ls1021aiot/Kconfig"
1107 source "board/freescale/ls1046aqds/Kconfig"
1108 source "board/freescale/ls1043ardb/Kconfig"
1109 source "board/freescale/ls1046ardb/Kconfig"
1110 source "board/freescale/ls1012aqds/Kconfig"
1111 source "board/freescale/ls1012ardb/Kconfig"
1112 source "board/freescale/ls1012afrdm/Kconfig"
1113 source "board/freescale/mx23evk/Kconfig"
1114 source "board/freescale/mx25pdk/Kconfig"
1115 source "board/freescale/mx28evk/Kconfig"
1116 source "board/freescale/mx31ads/Kconfig"
1117 source "board/freescale/mx31pdk/Kconfig"
1118 source "board/freescale/mx35pdk/Kconfig"
1119 source "board/freescale/s32v234evb/Kconfig"
1120 source "board/gdsys/a38x/Kconfig"
1121 source "board/grinn/chiliboard/Kconfig"
1122 source "board/gumstix/pepper/Kconfig"
1123 source "board/h2200/Kconfig"
1124 source "board/hisilicon/hikey/Kconfig"
1125 source "board/imx31_phycore/Kconfig"
1126 source "board/isee/igep003x/Kconfig"
1127 source "board/olimex/mx23_olinuxino/Kconfig"
1128 source "board/phytec/pcm051/Kconfig"
1129 source "board/ppcag/bg0900/Kconfig"
1130 source "board/sandisk/sansa_fuze_plus/Kconfig"
1131 source "board/schulercontrol/sc_sps_1/Kconfig"
1132 source "board/silica/pengwyn/Kconfig"
1133 source "board/spear/spear300/Kconfig"
1134 source "board/spear/spear310/Kconfig"
1135 source "board/spear/spear320/Kconfig"
1136 source "board/spear/spear600/Kconfig"
1137 source "board/spear/x600/Kconfig"
1138 source "board/st/stv0991/Kconfig"
1139 source "board/syteco/zmx25/Kconfig"
1140 source "board/tcl/sl50/Kconfig"
1141 source "board/birdland/bav335x/Kconfig"
1142 source "board/timll/devkit3250/Kconfig"
1143 source "board/toradex/colibri_pxa270/Kconfig"
1144 source "board/technologic/ts4600/Kconfig"
1145 source "board/vscom/baltos/Kconfig"
1146 source "board/woodburn/Kconfig"
1147 source "board/work-microwave/work_92105/Kconfig"
1148 source "board/zipitz2/Kconfig"
1149
1150 source "arch/arm/Kconfig.debug"
1151
1152 endmenu