arch/arm/Kconfig

   1 menu "ARM architecture"
   2         depends on ARM
   3
   4 config SYS_ARCH
   5         default "arm"
   6
   7 config ARM64
   8         bool
   9         select PHYS_64BIT
  10         select SYS_CACHE_SHIFT_6
  11
  12 config DMA_ADDR_T_64BIT
  13         bool
  14         default y if ARM64
  15
  16 config HAS_VBAR
  17         bool
  18
  19 config HAS_THUMB2
  20         bool
  21
  22 # Used for compatibility with asm files copied from the kernel
  23 config ARM_ASM_UNIFIED
  24         bool
  25         default y
  26
  27 # Used for compatibility with asm files copied from the kernel
  28 config THUMB2_KERNEL
  29         bool
  30
  31 # If set, the workarounds for these ARM errata are applied early during U-Boot
  32 # startup. Note that in general these options force the workarounds to be
  33 # applied; no CPU-type/version detection exists, unlike the similar options in
  34 # the Linux kernel. Do not set these options unless they apply!  Also note that
  35 # the following can be machine specific errata. These do have ability to
  36 # provide rudimentary version and machine specific checks, but expect no
  37 # product checks:
  38 # CONFIG_ARM_ERRATA_430973
  39 # CONFIG_ARM_ERRATA_454179
  40 # CONFIG_ARM_ERRATA_621766
  41 # CONFIG_ARM_ERRATA_798870
  42 # CONFIG_ARM_ERRATA_801819
  43 config ARM_ERRATA_430973
  44         bool
  45
  46 config ARM_ERRATA_454179
  47         bool
  48
  49 config ARM_ERRATA_621766
  50         bool
  51
  52 config ARM_ERRATA_716044
  53         bool
  54
  55 config ARM_ERRATA_725233
  56         bool
  57
  58 config ARM_ERRATA_742230
  59         bool
  60
  61 config ARM_ERRATA_743622
  62         bool
  63
  64 config ARM_ERRATA_751472
  65         bool
  66
  67 config ARM_ERRATA_761320
  68         bool
  69
  70 config ARM_ERRATA_773022
  71         bool
  72
  73 config ARM_ERRATA_774769
  74         bool
  75
  76 config ARM_ERRATA_794072
  77         bool
  78
  79 config ARM_ERRATA_798870
  80         bool
  81
  82 config ARM_ERRATA_801819
  83         bool
  84
  85 config ARM_ERRATA_826974
  86         bool
  87
  88 config ARM_ERRATA_828024
  89         bool
  90
  91 config ARM_ERRATA_829520
  92         bool
  93
  94 config ARM_ERRATA_833069
  95         bool
  96
  97 config ARM_ERRATA_833471
  98         bool
  99
 100 config ARM_ERRATA_845369
 101        bool
 102
 103 config ARM_ERRATA_852421
 104         bool
 105
 106 config ARM_ERRATA_852423
 107         bool
 108
 109 config CPU_ARM720T
 110         bool
 111         select SYS_CACHE_SHIFT_5
 112
 113 config CPU_ARM920T
 114         bool
 115         select SYS_CACHE_SHIFT_5
 116
 117 config CPU_ARM926EJS
 118         bool
 119         select SYS_CACHE_SHIFT_5
 120
 121 config CPU_ARM946ES
 122         bool
 123         select SYS_CACHE_SHIFT_5
 124
 125 config CPU_ARM1136
 126         bool
 127         select SYS_CACHE_SHIFT_5
 128
 129 config CPU_ARM1176
 130         bool
 131         select HAS_VBAR
 132         select SYS_CACHE_SHIFT_5
 133
 134 config CPU_V7
 135         bool
 136         select HAS_VBAR
 137         select HAS_THUMB2
 138         select SYS_CACHE_SHIFT_6
 139
 140 config CPU_V7M
 141         bool
 142         select HAS_THUMB2
 143         select THUMB2_KERNEL
 144         select SYS_CACHE_SHIFT_5
 145
 146 config CPU_PXA
 147         bool
 148         select SYS_CACHE_SHIFT_5
 149
 150 config CPU_SA1100
 151         bool
 152         select SYS_CACHE_SHIFT_5
 153
 154 config SYS_CPU
 155         default "arm720t" if CPU_ARM720T
 156         default "arm920t" if CPU_ARM920T
 157         default "arm926ejs" if CPU_ARM926EJS
 158         default "arm946es" if CPU_ARM946ES
 159         default "arm1136" if CPU_ARM1136
 160         default "arm1176" if CPU_ARM1176
 161         default "armv7" if CPU_V7
 162         default "armv7m" if CPU_V7M
 163         default "pxa" if CPU_PXA
 164         default "sa1100" if CPU_SA1100
 165         default "armv8" if ARM64
 166
 167 config SYS_ARM_ARCH
 168         int
 169         default 4 if CPU_ARM720T
 170         default 4 if CPU_ARM920T
 171         default 5 if CPU_ARM926EJS
 172         default 5 if CPU_ARM946ES
 173         default 6 if CPU_ARM1136
 174         default 6 if CPU_ARM1176
 175         default 7 if CPU_V7
 176         default 7 if CPU_V7M
 177         default 5 if CPU_PXA
 178         default 4 if CPU_SA1100
 179         default 8 if ARM64
 180
 181 config SYS_CACHE_SHIFT_5
 182         bool
 183
 184 config SYS_CACHE_SHIFT_6
 185         bool
 186
 187 config SYS_CACHE_SHIFT_7
 188         bool
 189
 190 config SYS_CACHELINE_SIZE
 191         int
 192         default 128 if SYS_CACHE_SHIFT_7
 193         default 64 if SYS_CACHE_SHIFT_6
 194         default 32 if SYS_CACHE_SHIFT_5
 195
 196 config ARM_SMCCC
 197         bool "Support for ARM SMC Calling Convention (SMCCC)"
 198         depends on CPU_V7 || ARM64
 199         select ARM_PSCI_FW
 200         help
 201           Say Y here if you want to enable ARM SMC Calling Convention.
 202           This should be enabled if U-Boot needs to communicate with system
 203           firmware (for example, PSCI) according to SMCCC.
 204
 205 config SEMIHOSTING
 206         bool "support boot from semihosting"
 207         help
 208           In emulated environments, semihosting is a way for
 209           the hosted environment to call out to the emulator to
 210           retrieve files from the host machine.
 211
 212 config SYS_THUMB_BUILD
 213         bool "Build U-Boot using the Thumb instruction set"
 214         depends on !ARM64
 215         help
 216            Use this flag to build U-Boot using the Thumb instruction set for
 217            ARM architectures. Thumb instruction set provides better code
 218            density. For ARM architectures that support Thumb2 this flag will
 219            result in Thumb2 code generated by GCC.
 220
 221 config SPL_SYS_THUMB_BUILD
 222         bool "Build SPL using the Thumb instruction set"
 223         default y if SYS_THUMB_BUILD
 224         depends on !ARM64
 225         help
 226            Use this flag to build SPL using the Thumb instruction set for
 227            ARM architectures. Thumb instruction set provides better code
 228            density. For ARM architectures that support Thumb2 this flag will
 229            result in Thumb2 code generated by GCC.
 230
 231 config SYS_L2CACHE_OFF
 232         bool "L2cache off"
 233         help
 234           If SoC does not support L2CACHE or one do not want to enable
 235           L2CACHE, choose this option.
 236
 237 config ENABLE_ARM_SOC_BOOT0_HOOK
 238         bool "prepare BOOT0 header"
 239         help
 240           If the SoC's BOOT0 requires a header area filled with (magic)
 241           values, then choose this option, and create a define called
 242           ARM_SOC_BOOT0_HOOK which contains the required assembler
 243           preprocessor code.
 244
 245 config ARM_CORTEX_CPU_IS_UP
 246         bool
 247         default n
 248
 249 config USE_ARCH_MEMCPY
 250         bool "Use an assembly optimized implementation of memcpy"
 251         default y
 252         depends on !ARM64
 253         help
 254           Enable the generation of an optimized version of memcpy.
 255           Such implementation may be faster under some conditions
 256           but may increase the binary size.
 257
 258 config SPL_USE_ARCH_MEMCPY
 259         bool "Use an assembly optimized implementation of memcpy for SPL"
 260         default y if USE_ARCH_MEMCPY
 261         depends on !ARM64
 262         help
 263           Enable the generation of an optimized version of memcpy.
 264           Such implementation may be faster under some conditions
 265           but may increase the binary size.
 266
 267 config USE_ARCH_MEMSET
 268         bool "Use an assembly optimized implementation of memset"
 269         default y
 270         depends on !ARM64
 271         help
 272           Enable the generation of an optimized version of memset.
 273           Such implementation may be faster under some conditions
 274           but may increase the binary size.
 275
 276 config SPL_USE_ARCH_MEMSET
 277         bool "Use an assembly optimized implementation of memset for SPL"
 278         default y if USE_ARCH_MEMSET
 279         depends on !ARM64
 280         help
 281           Enable the generation of an optimized version of memset.
 282           Such implementation may be faster under some conditions
 283           but may increase the binary size.
 284
 285 config ARM64_SUPPORT_AARCH32
 286         bool "ARM64 system support AArch32 execution state"
 287         default y if ARM64 && !TARGET_THUNDERX_88XX
 288         help
 289           This ARM64 system supports AArch32 execution state.
 290
 291 choice
 292         prompt "Target select"
 293         default TARGET_HIKEY
 294
 295 config ARCH_AT91
 296         bool "Atmel AT91"
 297         select SPL_BOARD_INIT if SPL
 298
 299 config TARGET_EDB93XX
 300         bool "Support edb93xx"
 301         select CPU_ARM920T
 302
 303 config TARGET_ASPENITE
 304         bool "Support aspenite"
 305         select CPU_ARM926EJS
 306
 307 config TARGET_GPLUGD
 308         bool "Support gplugd"
 309         select CPU_ARM926EJS
 310
 311 config ARCH_DAVINCI
 312         bool "TI DaVinci"
 313         select CPU_ARM926EJS
 314         imply CMD_SAVES
 315         help
 316           Support for TI's DaVinci platform.
 317
 318 config KIRKWOOD
 319         bool "Marvell Kirkwood"
 320         select CPU_ARM926EJS
 321         select BOARD_EARLY_INIT_F
 322         select ARCH_MISC_INIT
 323
 324 config ARCH_MVEBU
 325         bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 326         select OF_CONTROL
 327         select OF_SEPARATE
 328         select DM
 329         select DM_ETH
 330         select DM_SERIAL
 331         select DM_SPI
 332         select DM_SPI_FLASH
 333
 334 config TARGET_DEVKIT3250
 335         bool "Support devkit3250"
 336         select CPU_ARM926EJS
 337         select SUPPORT_SPL
 338
 339 config TARGET_WORK_92105
 340         bool "Support work_92105"
 341         select CPU_ARM926EJS
 342         select SUPPORT_SPL
 343
 344 config TARGET_MX25PDK
 345         bool "Support mx25pdk"
 346         select BOARD_LATE_INIT
 347         select CPU_ARM926EJS
 348         select BOARD_EARLY_INIT_F
 349
 350 config TARGET_ZMX25
 351         bool "Support zmx25"
 352         select BOARD_LATE_INIT
 353         select CPU_ARM926EJS
 354
 355 config TARGET_APF27
 356         bool "Support apf27"
 357         select CPU_ARM926EJS
 358         select SUPPORT_SPL
 359
 360 config TARGET_APX4DEVKIT
 361         bool "Support apx4devkit"
 362         select CPU_ARM926EJS
 363         select SUPPORT_SPL
 364
 365 config TARGET_XFI3
 366         bool "Support xfi3"
 367         select CPU_ARM926EJS
 368         select SUPPORT_SPL
 369
 370 config TARGET_M28EVK
 371         bool "Support m28evk"
 372         select CPU_ARM926EJS
 373         select SUPPORT_SPL
 374
 375 config TARGET_MX23EVK
 376         bool "Support mx23evk"
 377         select CPU_ARM926EJS
 378         select SUPPORT_SPL
 379         select BOARD_EARLY_INIT_F
 380
 381 config TARGET_MX28EVK
 382         bool "Support mx28evk"
 383         select CPU_ARM926EJS
 384         select SUPPORT_SPL
 385         select BOARD_EARLY_INIT_F
 386
 387 config TARGET_MX23_OLINUXINO
 388         bool "Support mx23_olinuxino"
 389         select CPU_ARM926EJS
 390         select SUPPORT_SPL
 391         select BOARD_EARLY_INIT_F
 392
 393 config TARGET_BG0900
 394         bool "Support bg0900"
 395         select CPU_ARM926EJS
 396         select SUPPORT_SPL
 397
 398 config TARGET_SANSA_FUZE_PLUS
 399         bool "Support sansa_fuze_plus"
 400         select CPU_ARM926EJS
 401         select SUPPORT_SPL
 402
 403 config TARGET_SC_SPS_1
 404         bool "Support sc_sps_1"
 405         select CPU_ARM926EJS
 406         select SUPPORT_SPL
 407
 408 config ORION5X
 409         bool "Marvell Orion"
 410         select CPU_ARM926EJS
 411
 412 config TARGET_SPEAR300
 413         bool "Support spear300"
 414         select CPU_ARM926EJS
 415         select BOARD_EARLY_INIT_F
 416         imply CMD_SAVES
 417
 418 config TARGET_SPEAR310
 419         bool "Support spear310"
 420         select CPU_ARM926EJS
 421         select BOARD_EARLY_INIT_F
 422         imply CMD_SAVES
 423
 424 config TARGET_SPEAR320
 425         bool "Support spear320"
 426         select CPU_ARM926EJS
 427         select BOARD_EARLY_INIT_F
 428         imply CMD_SAVES
 429
 430 config TARGET_SPEAR600
 431         bool "Support spear600"
 432         select CPU_ARM926EJS
 433         select BOARD_EARLY_INIT_F
 434         imply CMD_SAVES
 435
 436 config TARGET_STV0991
 437         bool "Support stv0991"
 438         select CPU_V7
 439         select DM
 440         select DM_SERIAL
 441         select DM_SPI
 442         select DM_SPI_FLASH
 443         select SPI_FLASH
 444
 445 config TARGET_X600
 446         bool "Support x600"
 447         select BOARD_LATE_INIT
 448         select CPU_ARM926EJS
 449         select SUPPORT_SPL
 450
 451 config TARGET_IMX31_PHYCORE
 452         bool "Support imx31_phycore_eet"
 453         select CPU_ARM1136
 454         select BOARD_EARLY_INIT_F
 455
 456 config TARGET_IMX31_PHYCORE_EET
 457         bool "Support imx31_phycore_eet"
 458         select BOARD_LATE_INIT
 459         select CPU_ARM1136
 460         select BOARD_EARLY_INIT_F
 461
 462 config TARGET_MX31ADS
 463         bool "Support mx31ads"
 464         select CPU_ARM1136
 465         select BOARD_EARLY_INIT_F
 466
 467 config TARGET_MX31PDK
 468         bool "Support mx31pdk"
 469         select BOARD_LATE_INIT
 470         select CPU_ARM1136
 471         select SUPPORT_SPL
 472         select BOARD_EARLY_INIT_F
 473
 474 config TARGET_WOODBURN
 475         bool "Support woodburn"
 476         select CPU_ARM1136
 477
 478 config TARGET_WOODBURN_SD
 479         bool "Support woodburn_sd"
 480         select CPU_ARM1136
 481         select SUPPORT_SPL
 482
 483 config TARGET_FLEA3
 484         bool "Support flea3"
 485         select CPU_ARM1136
 486
 487 config TARGET_MX35PDK
 488         bool "Support mx35pdk"
 489         select BOARD_LATE_INIT
 490         select CPU_ARM1136
 491
 492 config ARCH_BCM283X
 493         bool "Broadcom BCM283X family"
 494         select DM
 495         select DM_SERIAL
 496         select DM_GPIO
 497         select OF_CONTROL
 498         imply FAT_WRITE
 499
 500 config TARGET_VEXPRESS_CA15_TC2
 501         bool "Support vexpress_ca15_tc2"
 502         select CPU_V7
 503         select CPU_V7_HAS_NONSEC
 504         select CPU_V7_HAS_VIRT
 505
 506 config TARGET_VEXPRESS_CA5X2
 507         bool "Support vexpress_ca5x2"
 508         select CPU_V7
 509
 510 config TARGET_VEXPRESS_CA9X4
 511         bool "Support vexpress_ca9x4"
 512         select CPU_V7
 513
 514 config TARGET_BCM23550_W1D
 515         bool "Support bcm23550_w1d"
 516         select CPU_V7
 517         imply CRC32_VERIFY
 518         imply FAT_WRITE
 519
 520 config TARGET_BCM28155_AP
 521         bool "Support bcm28155_ap"
 522         select CPU_V7
 523         imply CRC32_VERIFY
 524         imply FAT_WRITE
 525
 526 config TARGET_BCMCYGNUS
 527         bool "Support bcmcygnus"
 528         select CPU_V7
 529         imply CRC32_VERIFY
 530         imply CMD_HASH
 531         imply FAT_WRITE
 532         imply HASH_VERIFY
 533         imply NETDEVICES
 534         imply BCM_SF2_ETH
 535         imply BCM_SF2_ETH_GMAC
 536
 537 config TARGET_BCMNSP
 538         bool "Support bcmnsp"
 539         select CPU_V7
 540
 541 config TARGET_BCMNS2
 542         bool "Support Broadcom Northstar2"
 543         select ARM64
 544         help
 545           Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
 546           ARMv8 Cortex-A57 processors targeting a broad range of networking
 547           applications
 548
 549 config ARCH_EXYNOS
 550         bool "Samsung EXYNOS"
 551         select DM
 552         select DM_I2C
 553         select DM_SPI_FLASH
 554         select DM_SERIAL
 555         select DM_SPI
 556         select DM_GPIO
 557         select DM_KEYBOARD
 558         imply FAT_WRITE
 559
 560 config ARCH_S5PC1XX
 561         bool "Samsung S5PC1XX"
 562         select CPU_V7
 563         select DM
 564         select DM_SERIAL
 565         select DM_GPIO
 566         select DM_I2C
 567
 568 config ARCH_HIGHBANK
 569         bool "Calxeda Highbank"
 570         select CPU_V7
 571
 572 config ARCH_INTEGRATOR
 573         bool "ARM Ltd. Integrator family"
 574         select DM
 575         select DM_SERIAL
 576
 577 config ARCH_KEYSTONE
 578         bool "TI Keystone"
 579         select CPU_V7
 580         select SUPPORT_SPL
 581         select SYS_THUMB_BUILD
 582         select CMD_POWEROFF
 583         imply CMD_MTDPARTS
 584         imply FIT
 585         imply CMD_SAVES
 586
 587 config ARCH_OMAP2PLUS
 588         bool "TI OMAP2+"
 589         select CPU_V7
 590         select SPL_BOARD_INIT if SPL
 591         select SUPPORT_SPL
 592         imply FIT
 593
 594 config ARCH_MESON
 595         bool "Amlogic Meson"
 596         help
 597           Support for the Meson SoC family developed by Amlogic Inc.,
 598           targeted at media players and tablet computers. We currently
 599           support the S905 (GXBaby) 64-bit SoC.
 600
 601 config ARCH_MX7ULP
 602         bool "NXP MX7ULP"
 603         select CPU_V7
 604         select ROM_UNIFIED_SECTIONS
 605
 606 config ARCH_MX7
 607         bool "Freescale MX7"
 608         select CPU_V7
 609         select SYS_FSL_HAS_SEC if SECURE_BOOT
 610         select SYS_FSL_SEC_COMPAT_4
 611         select SYS_FSL_SEC_LE
 612         select BOARD_EARLY_INIT_F
 613         select ARCH_MISC_INIT
 614
 615 config ARCH_MX6
 616         bool "Freescale MX6"
 617         select CPU_V7
 618         select SYS_FSL_HAS_SEC if SECURE_BOOT
 619         select SYS_FSL_SEC_COMPAT_4
 620         select SYS_FSL_SEC_LE
 621         select SYS_THUMB_BUILD if SPL
 622
 623 if ARCH_MX6
 624 config SPL_LDSCRIPT
 625         default "arch/arm/mach-omap2/u-boot-spl.lds"
 626 endif
 627
 628 config ARCH_MX5
 629         bool "Freescale MX5"
 630         select CPU_V7
 631         select BOARD_EARLY_INIT_F
 632
 633 config ARCH_RMOBILE
 634         bool "Renesas ARM SoCs"
 635         select DM
 636         select DM_SERIAL
 637         select BOARD_EARLY_INIT_F
 638         imply FAT_WRITE
 639         imply SYS_THUMB_BUILD
 640
 641 config TARGET_S32V234EVB
 642         bool "Support s32v234evb"
 643         select ARM64
 644         select SYS_FSL_ERRATUM_ESDHC111
 645
 646 config ARCH_SNAPDRAGON
 647         bool "Qualcomm Snapdragon SoCs"
 648         select ARM64
 649         select DM
 650         select DM_GPIO
 651         select DM_SERIAL
 652         select SPMI
 653         select OF_CONTROL
 654         select OF_SEPARATE
 655
 656 config ARCH_SOCFPGA
 657         bool "Altera SOCFPGA family"
 658         select CPU_V7
 659         select SUPPORT_SPL
 660         select OF_CONTROL
 661         select SPL_OF_CONTROL
 662         select DM
 663         select DM_SPI_FLASH
 664         select DM_SPI
 665         select ENABLE_ARM_SOC_BOOT0_HOOK
 666         select ARCH_EARLY_INIT_R
 667         select ARCH_MISC_INIT
 668         select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 669         select SYS_THUMB_BUILD
 670         imply CMD_MTDPARTS
 671         imply CRC32_VERIFY
 672         imply FAT_WRITE
 673
 674 config ARCH_SUNXI
 675         bool "Support sunxi (Allwinner) SoCs"
 676         select CMD_GPIO
 677         select CMD_MMC if MMC
 678         select CMD_USB if DISTRO_DEFAULTS
 679         select DM
 680         select DM_ETH
 681         select DM_GPIO
 682         select DM_KEYBOARD
 683         select DM_SERIAL
 684         select DM_USB if DISTRO_DEFAULTS
 685         select OF_BOARD_SETUP
 686         select OF_CONTROL
 687         select OF_SEPARATE
 688         select SPL_STACK_R if SPL
 689         select SPL_SYS_MALLOC_SIMPLE if SPL
 690         select SYS_NS16550
 691         select SPL_SYS_THUMB_BUILD if !ARM64
 692         select USB if DISTRO_DEFAULTS
 693         select USB_STORAGE if DISTRO_DEFAULTS
 694         select USB_KEYBOARD if DISTRO_DEFAULTS
 695         select USE_TINY_PRINTF
 696         imply CMD_FASTBOOT
 697         imply FASTBOOT
 698         imply FAT_WRITE
 699         imply PRE_CONSOLE_BUFFER
 700         imply SPL_GPIO_SUPPORT
 701         imply SPL_LIBCOMMON_SUPPORT
 702         imply SPL_LIBDISK_SUPPORT
 703         imply SPL_LIBGENERIC_SUPPORT
 704         imply SPL_MMC_SUPPORT if MMC
 705         imply SPL_POWER_SUPPORT
 706         imply SPL_SERIAL_SUPPORT
 707         imply USB_FUNCTION_FASTBOOT
 708
 709 config TARGET_TS4600
 710         bool "Support TS4600"
 711         select CPU_ARM926EJS
 712         select SUPPORT_SPL
 713
 714 config ARCH_VF610
 715         bool "Freescale Vybrid"
 716         select CPU_V7
 717         select SYS_FSL_ERRATUM_ESDHC111
 718         imply CMD_MTDPARTS
 719         imply NAND
 720
 721 config ARCH_ZYNQ
 722         bool "Xilinx Zynq Platform"
 723         select BOARD_LATE_INIT
 724         select CPU_V7
 725         select SUPPORT_SPL
 726         select OF_CONTROL
 727         select SPL_BOARD_INIT if SPL
 728         select SPL_OF_CONTROL if SPL
 729         select DM
 730         select DM_ETH
 731         select DM_GPIO
 732         select SPL_DM if SPL
 733         select DM_MMC
 734         select DM_SPI
 735         select DM_SERIAL
 736         select DM_SPI_FLASH
 737         select SPL_SEPARATE_BSS if SPL
 738         select DM_USB if USB
 739         select BLK
 740         select CLK
 741         select SPL_CLK
 742         select CLK_ZYNQ
 743         imply CMD_CLK
 744         imply FAT_WRITE
 745         imply CMD_SPL
 746
 747 config ARCH_ZYNQMP
 748         bool "Support Xilinx ZynqMP Platform"
 749         select ARM64
 750         select BOARD_LATE_INIT
 751         select DM
 752         select OF_CONTROL
 753         select DM_SERIAL
 754         select SUPPORT_SPL
 755         select CLK
 756         select SPL_BOARD_INIT if SPL
 757         select SPL_CLK
 758         select DM_USB if USB
 759         imply FAT_WRITE
 760
 761 config TEGRA
 762         bool "NVIDIA Tegra"
 763         imply FAT_WRITE
 764
 765 config TARGET_VEXPRESS64_AEMV8A
 766         bool "Support vexpress_aemv8a"
 767         select ARM64
 768
 769 config TARGET_VEXPRESS64_BASE_FVP
 770         bool "Support Versatile Express ARMv8a FVP BASE model"
 771         select ARM64
 772         select SEMIHOSTING
 773
 774 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 775         bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 776         select ARM64
 777         help
 778           This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 779           the default config to allow the user to load the images directly into
 780           DRAM using model parameters rather than by using semi-hosting to load
 781           the files from the host filesystem.
 782
 783 config TARGET_VEXPRESS64_JUNO
 784         bool "Support Versatile Express Juno Development Platform"
 785         select ARM64
 786
 787 config TARGET_LS2080A_EMU
 788         bool "Support ls2080a_emu"
 789         select ARCH_LS2080A
 790         select ARM64
 791         select ARMV8_MULTIENTRY
 792         select ARCH_MISC_INIT
 793         help
 794           Support for Freescale LS2080A_EMU platform
 795           The LS2080A Development System (EMULATOR) is a pre silicon
 796           development platform that supports the QorIQ LS2080A
 797           Layerscape Architecture processor.
 798
 799 config TARGET_LS2080A_SIMU
 800         bool "Support ls2080a_simu"
 801         select ARCH_LS2080A
 802         select ARM64
 803         select ARMV8_MULTIENTRY
 804         select ARCH_MISC_INIT
 805         help
 806           Support for Freescale LS2080A_SIMU platform
 807           The LS2080A Development System (QDS) is a pre silicon
 808           development platform that supports the QorIQ LS2080A
 809           Layerscape Architecture processor.
 810
 811 config TARGET_LS1088AQDS
 812         bool "Support ls1088aqds"
 813         select ARCH_LS1088A
 814         select ARM64
 815         select ARMV8_MULTIENTRY
 816         select ARCH_MISC_INIT
 817         select BOARD_LATE_INIT
 818         help
 819           Support for NXP LS1088AQDS platform
 820           The LS1088A Development System (QDS) is a high-performance
 821           development platform that supports the QorIQ LS1088A
 822           Layerscape Architecture processor.
 823
 824 config TARGET_LS2080AQDS
 825         bool "Support ls2080aqds"
 826         select ARCH_LS2080A
 827         select ARM64
 828         select ARMV8_MULTIENTRY
 829         select BOARD_LATE_INIT
 830         select SUPPORT_SPL
 831         select ARCH_MISC_INIT
 832         imply SCSI
 833         help
 834           Support for Freescale LS2080AQDS platform
 835           The LS2080A Development System (QDS) is a high-performance
 836           development platform that supports the QorIQ LS2080A
 837           Layerscape Architecture processor.
 838
 839 config TARGET_LS2080ARDB
 840         bool "Support ls2080ardb"
 841         select ARCH_LS2080A
 842         select ARM64
 843         select ARMV8_MULTIENTRY
 844         select BOARD_LATE_INIT
 845         select SUPPORT_SPL
 846         select ARCH_MISC_INIT
 847         imply SCSI
 848         help
 849           Support for Freescale LS2080ARDB platform.
 850           The LS2080A Reference design board (RDB) is a high-performance
 851           development platform that supports the QorIQ LS2080A
 852           Layerscape Architecture processor.
 853
 854 config TARGET_LS2081ARDB
 855         bool "Support ls2081ardb"
 856         select ARCH_LS2080A
 857         select ARM64
 858         select ARMV8_MULTIENTRY
 859         select BOARD_LATE_INIT
 860         select SUPPORT_SPL
 861         select ARCH_MISC_INIT
 862         help
 863           Support for Freescale LS2081ARDB platform.
 864           The LS2081A Reference design board (RDB) is a high-performance
 865           development platform that supports the QorIQ LS2081A/LS2041A
 866           Layerscape Architecture processor.
 867
 868 config TARGET_HIKEY
 869         bool "Support HiKey 96boards Consumer Edition Platform"
 870         select ARM64
 871         select DM
 872         select DM_GPIO
 873         select DM_SERIAL
 874         select OF_CONTROL
 875           help
 876           Support for HiKey 96boards platform. It features a HI6220
 877           SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 878
 879 config TARGET_POPLAR
 880         bool "Support Poplar 96boards Enterprise Edition Platform"
 881         select ARM64
 882         select DM
 883         select OF_CONTROL
 884         select DM_SERIAL
 885         select DM_USB
 886           help
 887           Support for Poplar 96boards EE platform. It features a HI3798cv200
 888           SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
 889           making it capable of running any commercial set-top solution based on
 890           Linux or Android.
 891
 892 config TARGET_LS1012AQDS
 893         bool "Support ls1012aqds"
 894         select ARCH_LS1012A
 895         select ARM64
 896         select BOARD_LATE_INIT
 897         help
 898           Support for Freescale LS1012AQDS platform.
 899           The LS1012A Development System (QDS) is a high-performance
 900           development platform that supports the QorIQ LS1012A
 901           Layerscape Architecture processor.
 902
 903 config TARGET_LS1012ARDB
 904         bool "Support ls1012ardb"
 905         select ARCH_LS1012A
 906         select ARM64
 907         select BOARD_LATE_INIT
 908         imply SCSI
 909         help
 910           Support for Freescale LS1012ARDB platform.
 911           The LS1012A Reference design board (RDB) is a high-performance
 912           development platform that supports the QorIQ LS1012A
 913           Layerscape Architecture processor.
 914
 915 config TARGET_LS1012AFRDM
 916         bool "Support ls1012afrdm"
 917         select ARCH_LS1012A
 918         select ARM64
 919         help
 920           Support for Freescale LS1012AFRDM platform.
 921           The LS1012A Freedom  board (FRDM) is a high-performance
 922           development platform that supports the QorIQ LS1012A
 923           Layerscape Architecture processor.
 924
 925 config TARGET_LS1088ARDB
 926         bool "Support ls1088ardb"
 927         select ARCH_LS1088A
 928         select ARM64
 929         select ARMV8_MULTIENTRY
 930         select ARCH_MISC_INIT
 931         select BOARD_LATE_INIT
 932         help
 933           Support for NXP LS1088ARDB platform.
 934           The LS1088A Reference design board (RDB) is a high-performance
 935           development platform that supports the QorIQ LS1088A
 936           Layerscape Architecture processor.
 937
 938 config TARGET_LS1021AQDS
 939         bool "Support ls1021aqds"
 940         select BOARD_LATE_INIT
 941         select CPU_V7
 942         select CPU_V7_HAS_NONSEC
 943         select CPU_V7_HAS_VIRT
 944         select SUPPORT_SPL
 945         select ARCH_LS1021A
 946         select ARCH_SUPPORT_PSCI
 947         select LS1_DEEP_SLEEP
 948         select SYS_FSL_DDR
 949         select BOARD_EARLY_INIT_F
 950         imply SCSI
 951
 952 config TARGET_LS1021ATWR
 953         bool "Support ls1021atwr"
 954         select BOARD_LATE_INIT
 955         select CPU_V7
 956         select CPU_V7_HAS_NONSEC
 957         select CPU_V7_HAS_VIRT
 958         select SUPPORT_SPL
 959         select ARCH_LS1021A
 960         select ARCH_SUPPORT_PSCI
 961         select LS1_DEEP_SLEEP
 962         select BOARD_EARLY_INIT_F
 963         imply SCSI
 964
 965 config TARGET_LS1021AIOT
 966         bool "Support ls1021aiot"
 967         select BOARD_LATE_INIT
 968         select CPU_V7
 969         select CPU_V7_HAS_NONSEC
 970         select CPU_V7_HAS_VIRT
 971         select SUPPORT_SPL
 972         select ARCH_LS1021A
 973         select ARCH_SUPPORT_PSCI
 974         imply SCSI
 975         help
 976           Support for Freescale LS1021AIOT platform.
 977           The LS1021A Freescale board (IOT) is a high-performance
 978           development platform that supports the QorIQ LS1021A
 979           Layerscape Architecture processor.
 980
 981 config TARGET_LS1043AQDS
 982         bool "Support ls1043aqds"
 983         select ARCH_LS1043A
 984         select ARM64
 985         select ARMV8_MULTIENTRY
 986         select BOARD_LATE_INIT
 987         select SUPPORT_SPL
 988         select BOARD_EARLY_INIT_F
 989         imply SCSI
 990         help
 991           Support for Freescale LS1043AQDS platform.
 992
 993 config TARGET_LS1043ARDB
 994         bool "Support ls1043ardb"
 995         select ARCH_LS1043A
 996         select ARM64
 997         select ARMV8_MULTIENTRY
 998         select BOARD_LATE_INIT
 999         select SUPPORT_SPL
1000         select BOARD_EARLY_INIT_F
1001         imply SCSI
1002         help
1003           Support for Freescale LS1043ARDB platform.
1004
1005 config TARGET_LS1046AQDS
1006         bool "Support ls1046aqds"
1007         select ARCH_LS1046A
1008         select ARM64
1009         select ARMV8_MULTIENTRY
1010         select BOARD_LATE_INIT
1011         select SUPPORT_SPL
1012         select DM_SPI_FLASH if DM_SPI
1013         select BOARD_EARLY_INIT_F
1014         imply SCSI
1015         help
1016           Support for Freescale LS1046AQDS platform.
1017           The LS1046A Development System (QDS) is a high-performance
1018           development platform that supports the QorIQ LS1046A
1019           Layerscape Architecture processor.
1020
1021 config TARGET_LS1046ARDB
1022         bool "Support ls1046ardb"
1023         select ARCH_LS1046A
1024         select ARM64
1025         select ARMV8_MULTIENTRY
1026         select BOARD_LATE_INIT
1027         select SUPPORT_SPL
1028         select DM_SPI_FLASH if DM_SPI
1029         select POWER_MC34VR500
1030         select BOARD_EARLY_INIT_F
1031         imply SCSI
1032         help
1033           Support for Freescale LS1046ARDB platform.
1034           The LS1046A Reference Design Board (RDB) is a high-performance
1035           development platform that supports the QorIQ LS1046A
1036           Layerscape Architecture processor.
1037
1038 config TARGET_H2200
1039         bool "Support h2200"
1040         select CPU_PXA
1041
1042 config TARGET_ZIPITZ2
1043         bool "Support zipitz2"
1044         select CPU_PXA
1045
1046 config TARGET_COLIBRI_PXA270
1047         bool "Support colibri_pxa270"
1048         select CPU_PXA
1049
1050 config ARCH_UNIPHIER
1051         bool "Socionext UniPhier SoCs"
1052         select BOARD_LATE_INIT
1053         select DM
1054         select DM_GPIO
1055         select DM_I2C
1056         select DM_MMC
1057         select DM_RESET
1058         select DM_SERIAL
1059         select DM_USB
1060         select OF_CONTROL
1061         select OF_LIBFDT
1062         select PINCTRL
1063         select SPL_BOARD_INIT if SPL
1064         select SPL_DM if SPL
1065         select SPL_LIBCOMMON_SUPPORT if SPL
1066         select SPL_LIBGENERIC_SUPPORT if SPL
1067         select SPL_OF_CONTROL if SPL
1068         select SPL_PINCTRL if SPL
1069         select SUPPORT_SPL
1070         imply FAT_WRITE
1071         help
1072           Support for UniPhier SoC family developed by Socionext Inc.
1073           (formerly, System LSI Business Division of Panasonic Corporation)
1074
1075 config STM32
1076         bool "Support STM32"
1077         select CPU_V7M
1078         select DM
1079         select DM_SERIAL
1080         select SYS_THUMB_BUILD
1081
1082 config ARCH_STI
1083         bool "Support STMicrolectronics SoCs"
1084         select CPU_V7
1085         select DM
1086         select DM_SERIAL
1087         select BLK
1088         select DM_MMC
1089         select DM_RESET
1090         help
1091           Support for STMicroelectronics STiH407/10 SoC family.
1092           This SoC is used on Linaro 96Board STiH410-B2260
1093
1094 config ARCH_ROCKCHIP
1095         bool "Support Rockchip SoCs"
1096         select OF_CONTROL
1097         select BLK
1098         select DM
1099         select SPL_DM if SPL
1100         select SYS_MALLOC_F
1101         select SYS_THUMB_BUILD if !ARM64
1102         select SPL_SYS_MALLOC_SIMPLE if SPL
1103         select DM_GPIO
1104         select DM_I2C
1105         select DM_MMC
1106         select DM_SERIAL
1107         select DM_SPI
1108         select DM_SPI_FLASH
1109         select DM_USB if USB
1110         select DM_PWM
1111         select DM_REGULATOR
1112         imply CMD_FASTBOOT
1113         imply FASTBOOT
1114         imply FAT_WRITE
1115         imply USB_FUNCTION_FASTBOOT
1116         imply SPL_SYSRESET
1117
1118 config TARGET_THUNDERX_88XX
1119         bool "Support ThunderX 88xx"
1120         select ARM64
1121         select OF_CONTROL
1122         select SYS_CACHE_SHIFT_7
1123
1124 config ARCH_ASPEED
1125         bool "Support Aspeed SoCs"
1126         select OF_CONTROL
1127         select DM
1128
1129 endchoice
1130
1131 source "arch/arm/mach-aspeed/Kconfig"
1132
1133 source "arch/arm/mach-at91/Kconfig"
1134
1135 source "arch/arm/mach-bcm283x/Kconfig"
1136
1137 source "arch/arm/mach-davinci/Kconfig"
1138
1139 source "arch/arm/mach-exynos/Kconfig"
1140
1141 source "arch/arm/mach-highbank/Kconfig"
1142
1143 source "arch/arm/mach-integrator/Kconfig"
1144
1145 source "arch/arm/mach-keystone/Kconfig"
1146
1147 source "arch/arm/mach-kirkwood/Kconfig"
1148
1149 source "arch/arm/mach-mvebu/Kconfig"
1150
1151 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1152
1153 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1154
1155 source "arch/arm/mach-imx/mx7/Kconfig"
1156
1157 source "arch/arm/mach-imx/mx6/Kconfig"
1158
1159 source "arch/arm/mach-imx/mx5/Kconfig"
1160
1161 source "arch/arm/mach-omap2/Kconfig"
1162
1163 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1164
1165 source "arch/arm/mach-orion5x/Kconfig"
1166
1167 source "arch/arm/mach-rmobile/Kconfig"
1168
1169 source "arch/arm/mach-meson/Kconfig"
1170
1171 source "arch/arm/mach-rockchip/Kconfig"
1172
1173 source "arch/arm/mach-s5pc1xx/Kconfig"
1174
1175 source "arch/arm/mach-snapdragon/Kconfig"
1176
1177 source "arch/arm/mach-socfpga/Kconfig"
1178
1179 source "arch/arm/mach-sti/Kconfig"
1180
1181 source "arch/arm/mach-stm32/Kconfig"
1182
1183 source "arch/arm/mach-sunxi/Kconfig"
1184
1185 source "arch/arm/mach-tegra/Kconfig"
1186
1187 source "arch/arm/mach-uniphier/Kconfig"
1188
1189 source "arch/arm/cpu/armv7/vf610/Kconfig"
1190
1191 source "arch/arm/mach-zynq/Kconfig"
1192
1193 source "arch/arm/cpu/armv7/Kconfig"
1194
1195 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1196
1197 source "arch/arm/cpu/armv8/Kconfig"
1198
1199 source "arch/arm/mach-imx/Kconfig"
1200
1201 source "board/aries/m28evk/Kconfig"
1202 source "board/bosch/shc/Kconfig"
1203 source "board/CarMediaLab/flea3/Kconfig"
1204 source "board/Marvell/aspenite/Kconfig"
1205 source "board/Marvell/gplugd/Kconfig"
1206 source "board/armadeus/apf27/Kconfig"
1207 source "board/armltd/vexpress/Kconfig"
1208 source "board/armltd/vexpress64/Kconfig"
1209 source "board/bluegiga/apx4devkit/Kconfig"
1210 source "board/broadcom/bcm23550_w1d/Kconfig"
1211 source "board/broadcom/bcm28155_ap/Kconfig"
1212 source "board/broadcom/bcmcygnus/Kconfig"
1213 source "board/broadcom/bcmnsp/Kconfig"
1214 source "board/broadcom/bcmns2/Kconfig"
1215 source "board/cavium/thunderx/Kconfig"
1216 source "board/cirrus/edb93xx/Kconfig"
1217 source "board/creative/xfi3/Kconfig"
1218 source "board/freescale/ls2080a/Kconfig"
1219 source "board/freescale/ls2080aqds/Kconfig"
1220 source "board/freescale/ls2080ardb/Kconfig"
1221 source "board/freescale/ls1088a/Kconfig"
1222 source "board/freescale/ls1021aqds/Kconfig"
1223 source "board/freescale/ls1043aqds/Kconfig"
1224 source "board/freescale/ls1021atwr/Kconfig"
1225 source "board/freescale/ls1021aiot/Kconfig"
1226 source "board/freescale/ls1046aqds/Kconfig"
1227 source "board/freescale/ls1043ardb/Kconfig"
1228 source "board/freescale/ls1046ardb/Kconfig"
1229 source "board/freescale/ls1012aqds/Kconfig"
1230 source "board/freescale/ls1012ardb/Kconfig"
1231 source "board/freescale/ls1012afrdm/Kconfig"
1232 source "board/freescale/mx23evk/Kconfig"
1233 source "board/freescale/mx25pdk/Kconfig"
1234 source "board/freescale/mx28evk/Kconfig"
1235 source "board/freescale/mx31ads/Kconfig"
1236 source "board/freescale/mx31pdk/Kconfig"
1237 source "board/freescale/mx35pdk/Kconfig"
1238 source "board/freescale/s32v234evb/Kconfig"
1239 source "board/gdsys/a38x/Kconfig"
1240 source "board/grinn/chiliboard/Kconfig"
1241 source "board/gumstix/pepper/Kconfig"
1242 source "board/h2200/Kconfig"
1243 source "board/hisilicon/hikey/Kconfig"
1244 source "board/hisilicon/poplar/Kconfig"
1245 source "board/imx31_phycore/Kconfig"
1246 source "board/isee/igep003x/Kconfig"
1247 source "board/olimex/mx23_olinuxino/Kconfig"
1248 source "board/phytec/pcm051/Kconfig"
1249 source "board/ppcag/bg0900/Kconfig"
1250 source "board/sandisk/sansa_fuze_plus/Kconfig"
1251 source "board/schulercontrol/sc_sps_1/Kconfig"
1252 source "board/silica/pengwyn/Kconfig"
1253 source "board/spear/spear300/Kconfig"
1254 source "board/spear/spear310/Kconfig"
1255 source "board/spear/spear320/Kconfig"
1256 source "board/spear/spear600/Kconfig"
1257 source "board/spear/x600/Kconfig"
1258 source "board/st/stv0991/Kconfig"
1259 source "board/syteco/zmx25/Kconfig"
1260 source "board/tcl/sl50/Kconfig"
1261 source "board/birdland/bav335x/Kconfig"
1262 source "board/timll/devkit3250/Kconfig"
1263 source "board/toradex/colibri_pxa270/Kconfig"
1264 source "board/technologic/ts4600/Kconfig"
1265 source "board/vscom/baltos/Kconfig"
1266 source "board/woodburn/Kconfig"
1267 source "board/work-microwave/work_92105/Kconfig"
1268 source "board/zipitz2/Kconfig"
1269
1270 source "arch/arm/Kconfig.debug"
1271
1272 endmenu
1273
1274 config SPL_LDSCRIPT
1275         default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
1276         default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1277         default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
1278
1279