arch/arm/Kconfig

   1 menu "ARM architecture"
   2         depends on ARM
   3
   4 config SYS_ARCH
   5         default "arm"
   6
   7 config ARM64
   8         bool
   9         select PHYS_64BIT
  10         select SYS_CACHE_SHIFT_6
  11
  12 config DMA_ADDR_T_64BIT
  13         bool
  14         default y if ARM64
  15
  16 config HAS_VBAR
  17         bool
  18
  19 config HAS_THUMB2
  20         bool
  21
  22 # If set, the workarounds for these ARM errata are applied early during U-Boot
  23 # startup. Note that in general these options force the workarounds to be
  24 # applied; no CPU-type/version detection exists, unlike the similar options in
  25 # the Linux kernel. Do not set these options unless they apply!  Also note that
  26 # the following can be machine specific errata. These do have ability to
  27 # provide rudimentary version and machine specific checks, but expect no
  28 # product checks:
  29 # CONFIG_ARM_ERRATA_430973
  30 # CONFIG_ARM_ERRATA_454179
  31 # CONFIG_ARM_ERRATA_621766
  32 # CONFIG_ARM_ERRATA_798870
  33 # CONFIG_ARM_ERRATA_801819
  34 config ARM_ERRATA_430973
  35         bool
  36
  37 config ARM_ERRATA_454179
  38         bool
  39
  40 config ARM_ERRATA_621766
  41         bool
  42
  43 config ARM_ERRATA_716044
  44         bool
  45
  46 config ARM_ERRATA_725233
  47         bool
  48
  49 config ARM_ERRATA_742230
  50         bool
  51
  52 config ARM_ERRATA_743622
  53         bool
  54
  55 config ARM_ERRATA_751472
  56         bool
  57
  58 config ARM_ERRATA_761320
  59         bool
  60
  61 config ARM_ERRATA_773022
  62         bool
  63
  64 config ARM_ERRATA_774769
  65         bool
  66
  67 config ARM_ERRATA_794072
  68         bool
  69
  70 config ARM_ERRATA_798870
  71         bool
  72
  73 config ARM_ERRATA_801819
  74         bool
  75
  76 config ARM_ERRATA_826974
  77         bool
  78
  79 config ARM_ERRATA_828024
  80         bool
  81
  82 config ARM_ERRATA_829520
  83         bool
  84
  85 config ARM_ERRATA_833069
  86         bool
  87
  88 config ARM_ERRATA_833471
  89         bool
  90
  91 config ARM_ERRATA_852421
  92         bool
  93
  94 config ARM_ERRATA_852423
  95         bool
  96
  97 config CPU_ARM720T
  98         bool
  99         select SYS_CACHE_SHIFT_5
 100
 101 config CPU_ARM920T
 102         bool
 103         select SYS_CACHE_SHIFT_5
 104
 105 config CPU_ARM926EJS
 106         bool
 107         select SYS_CACHE_SHIFT_5
 108
 109 config CPU_ARM946ES
 110         bool
 111         select SYS_CACHE_SHIFT_5
 112
 113 config CPU_ARM1136
 114         bool
 115         select SYS_CACHE_SHIFT_5
 116
 117 config CPU_ARM1176
 118         bool
 119         select HAS_VBAR
 120         select SYS_CACHE_SHIFT_5
 121
 122 config CPU_V7
 123         bool
 124         select HAS_VBAR
 125         select HAS_THUMB2
 126         select SYS_CACHE_SHIFT_6
 127
 128 config CPU_V7M
 129         bool
 130         select HAS_THUMB2
 131         select SYS_CACHE_SHIFT_5
 132
 133 config CPU_PXA
 134         bool
 135         select SYS_CACHE_SHIFT_5
 136
 137 config CPU_SA1100
 138         bool
 139         select SYS_CACHE_SHIFT_5
 140
 141 config SYS_CPU
 142         default "arm720t" if CPU_ARM720T
 143         default "arm920t" if CPU_ARM920T
 144         default "arm926ejs" if CPU_ARM926EJS
 145         default "arm946es" if CPU_ARM946ES
 146         default "arm1136" if CPU_ARM1136
 147         default "arm1176" if CPU_ARM1176
 148         default "armv7" if CPU_V7
 149         default "armv7m" if CPU_V7M
 150         default "pxa" if CPU_PXA
 151         default "sa1100" if CPU_SA1100
 152         default "armv8" if ARM64
 153
 154 config SYS_ARM_ARCH
 155         int
 156         default 4 if CPU_ARM720T
 157         default 4 if CPU_ARM920T
 158         default 5 if CPU_ARM926EJS
 159         default 5 if CPU_ARM946ES
 160         default 6 if CPU_ARM1136
 161         default 6 if CPU_ARM1176
 162         default 7 if CPU_V7
 163         default 7 if CPU_V7M
 164         default 5 if CPU_PXA
 165         default 4 if CPU_SA1100
 166         default 8 if ARM64
 167
 168 config SYS_CACHE_SHIFT_5
 169         bool
 170
 171 config SYS_CACHE_SHIFT_6
 172         bool
 173
 174 config SYS_CACHE_SHIFT_7
 175         bool
 176
 177 config SYS_CACHELINE_SIZE
 178         int
 179         default 128 if SYS_CACHE_SHIFT_7
 180         default 64 if SYS_CACHE_SHIFT_6
 181         default 32 if SYS_CACHE_SHIFT_5
 182
 183 config ARM_SMCCC
 184         bool "Support for ARM SMC Calling Convention (SMCCC)"
 185         depends on CPU_V7 || ARM64
 186         select ARM_PSCI_FW
 187         help
 188           Say Y here if you want to enable ARM SMC Calling Convention.
 189           This should be enabled if U-Boot needs to communicate with system
 190           firmware (for example, PSCI) according to SMCCC.
 191
 192 config SEMIHOSTING
 193         bool "support boot from semihosting"
 194         help
 195           In emulated environments, semihosting is a way for
 196           the hosted environment to call out to the emulator to
 197           retrieve files from the host machine.
 198
 199 config SYS_THUMB_BUILD
 200         bool "Build U-Boot using the Thumb instruction set"
 201         depends on !ARM64
 202         help
 203            Use this flag to build U-Boot using the Thumb instruction set for
 204            ARM architectures. Thumb instruction set provides better code
 205            density. For ARM architectures that support Thumb2 this flag will
 206            result in Thumb2 code generated by GCC.
 207
 208 config SPL_SYS_THUMB_BUILD
 209         bool "Build SPL using the Thumb instruction set"
 210         default y if SYS_THUMB_BUILD
 211         depends on !ARM64
 212         help
 213            Use this flag to build SPL using the Thumb instruction set for
 214            ARM architectures. Thumb instruction set provides better code
 215            density. For ARM architectures that support Thumb2 this flag will
 216            result in Thumb2 code generated by GCC.
 217
 218 config SYS_L2CACHE_OFF
 219         bool "L2cache off"
 220         help
 221           If SoC does not support L2CACHE or one do not want to enable
 222           L2CACHE, choose this option.
 223
 224 config ENABLE_ARM_SOC_BOOT0_HOOK
 225         bool "prepare BOOT0 header"
 226         help
 227           If the SoC's BOOT0 requires a header area filled with (magic)
 228           values, then choose this option, and create a define called
 229           ARM_SOC_BOOT0_HOOK which contains the required assembler
 230           preprocessor code.
 231
 232 config ARM_CORTEX_CPU_IS_UP
 233         bool
 234         default n
 235
 236 config USE_ARCH_MEMCPY
 237         bool "Use an assembly optimized implementation of memcpy"
 238         default y
 239         depends on !ARM64
 240         help
 241           Enable the generation of an optimized version of memcpy.
 242           Such implementation may be faster under some conditions
 243           but may increase the binary size.
 244
 245 config SPL_USE_ARCH_MEMCPY
 246         bool "Use an assembly optimized implementation of memcpy"
 247         default y if USE_ARCH_MEMCPY
 248         depends on !ARM64
 249         help
 250           Enable the generation of an optimized version of memcpy.
 251           Such implementation may be faster under some conditions
 252           but may increase the binary size.
 253
 254 config USE_ARCH_MEMSET
 255         bool "Use an assembly optimized implementation of memset"
 256         default y
 257         depends on !ARM64
 258         help
 259           Enable the generation of an optimized version of memset.
 260           Such implementation may be faster under some conditions
 261           but may increase the binary size.
 262
 263 config SPL_USE_ARCH_MEMSET
 264         bool "Use an assembly optimized implementation of memset"
 265         default y if USE_ARCH_MEMSET
 266         depends on !ARM64
 267         help
 268           Enable the generation of an optimized version of memset.
 269           Such implementation may be faster under some conditions
 270           but may increase the binary size.
 271
 272 config ARM64_SUPPORT_AARCH32
 273         bool "ARM64 system support AArch32 execution state"
 274         default y if ARM64 && !TARGET_THUNDERX_88XX
 275         help
 276           This ARM64 system supports AArch32 execution state.
 277
 278 choice
 279         prompt "Target select"
 280         default TARGET_HIKEY
 281
 282 config ARCH_AT91
 283         bool "Atmel AT91"
 284
 285 config TARGET_EDB93XX
 286         bool "Support edb93xx"
 287         select CPU_ARM920T
 288
 289 config TARGET_ASPENITE
 290         bool "Support aspenite"
 291         select CPU_ARM926EJS
 292
 293 config TARGET_GPLUGD
 294         bool "Support gplugd"
 295         select CPU_ARM926EJS
 296
 297 config ARCH_DAVINCI
 298         bool "TI DaVinci"
 299         select CPU_ARM926EJS
 300         help
 301           Support for TI's DaVinci platform.
 302
 303 config KIRKWOOD
 304         bool "Marvell Kirkwood"
 305         select CPU_ARM926EJS
 306         select BOARD_EARLY_INIT_F
 307         select ARCH_MISC_INIT
 308
 309 config ARCH_MVEBU
 310         bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 311         select OF_CONTROL
 312         select OF_SEPARATE
 313         select DM
 314         select DM_ETH
 315         select DM_SERIAL
 316         select DM_SPI
 317         select DM_SPI_FLASH
 318
 319 config TARGET_DEVKIT3250
 320         bool "Support devkit3250"
 321         select CPU_ARM926EJS
 322         select SUPPORT_SPL
 323
 324 config TARGET_WORK_92105
 325         bool "Support work_92105"
 326         select CPU_ARM926EJS
 327         select SUPPORT_SPL
 328
 329 config TARGET_MX25PDK
 330         bool "Support mx25pdk"
 331         select BOARD_LATE_INIT
 332         select CPU_ARM926EJS
 333         select BOARD_EARLY_INIT_F
 334
 335 config TARGET_ZMX25
 336         bool "Support zmx25"
 337         select BOARD_LATE_INIT
 338         select CPU_ARM926EJS
 339
 340 config TARGET_APF27
 341         bool "Support apf27"
 342         select CPU_ARM926EJS
 343         select SUPPORT_SPL
 344
 345 config TARGET_APX4DEVKIT
 346         bool "Support apx4devkit"
 347         select CPU_ARM926EJS
 348         select SUPPORT_SPL
 349
 350 config TARGET_XFI3
 351         bool "Support xfi3"
 352         select CPU_ARM926EJS
 353         select SUPPORT_SPL
 354
 355 config TARGET_M28EVK
 356         bool "Support m28evk"
 357         select CPU_ARM926EJS
 358         select SUPPORT_SPL
 359
 360 config TARGET_MX23EVK
 361         bool "Support mx23evk"
 362         select CPU_ARM926EJS
 363         select SUPPORT_SPL
 364         select BOARD_EARLY_INIT_F
 365
 366 config TARGET_MX28EVK
 367         bool "Support mx28evk"
 368         select CPU_ARM926EJS
 369         select SUPPORT_SPL
 370         select BOARD_EARLY_INIT_F
 371
 372 config TARGET_MX23_OLINUXINO
 373         bool "Support mx23_olinuxino"
 374         select CPU_ARM926EJS
 375         select SUPPORT_SPL
 376         select BOARD_EARLY_INIT_F
 377
 378 config TARGET_BG0900
 379         bool "Support bg0900"
 380         select CPU_ARM926EJS
 381         select SUPPORT_SPL
 382
 383 config TARGET_SANSA_FUZE_PLUS
 384         bool "Support sansa_fuze_plus"
 385         select CPU_ARM926EJS
 386         select SUPPORT_SPL
 387
 388 config TARGET_SC_SPS_1
 389         bool "Support sc_sps_1"
 390         select CPU_ARM926EJS
 391         select SUPPORT_SPL
 392
 393 config ORION5X
 394         bool "Marvell Orion"
 395         select CPU_ARM926EJS
 396
 397 config TARGET_SPEAR300
 398         bool "Support spear300"
 399         select CPU_ARM926EJS
 400         select BOARD_EARLY_INIT_F
 401
 402 config TARGET_SPEAR310
 403         bool "Support spear310"
 404         select CPU_ARM926EJS
 405         select BOARD_EARLY_INIT_F
 406
 407 config TARGET_SPEAR320
 408         bool "Support spear320"
 409         select CPU_ARM926EJS
 410         select BOARD_EARLY_INIT_F
 411
 412 config TARGET_SPEAR600
 413         bool "Support spear600"
 414         select CPU_ARM926EJS
 415         select BOARD_EARLY_INIT_F
 416
 417 config TARGET_STV0991
 418         bool "Support stv0991"
 419         select CPU_V7
 420         select DM
 421         select DM_SERIAL
 422         select DM_SPI
 423         select DM_SPI_FLASH
 424         select SPI_FLASH
 425
 426 config TARGET_X600
 427         bool "Support x600"
 428         select BOARD_LATE_INIT
 429         select CPU_ARM926EJS
 430         select SUPPORT_SPL
 431
 432 config TARGET_IMX31_PHYCORE
 433         bool "Support imx31_phycore_eet"
 434         select CPU_ARM1136
 435         select BOARD_EARLY_INIT_F
 436
 437 config TARGET_IMX31_PHYCORE_EET
 438         bool "Support imx31_phycore_eet"
 439         select BOARD_LATE_INIT
 440         select CPU_ARM1136
 441         select BOARD_EARLY_INIT_F
 442
 443 config TARGET_MX31ADS
 444         bool "Support mx31ads"
 445         select CPU_ARM1136
 446         select BOARD_EARLY_INIT_F
 447
 448 config TARGET_MX31PDK
 449         bool "Support mx31pdk"
 450         select BOARD_LATE_INIT
 451         select CPU_ARM1136
 452         select SUPPORT_SPL
 453         select BOARD_EARLY_INIT_F
 454
 455 config TARGET_WOODBURN
 456         bool "Support woodburn"
 457         select CPU_ARM1136
 458
 459 config TARGET_WOODBURN_SD
 460         bool "Support woodburn_sd"
 461         select CPU_ARM1136
 462         select SUPPORT_SPL
 463
 464 config TARGET_FLEA3
 465         bool "Support flea3"
 466         select CPU_ARM1136
 467
 468 config TARGET_MX35PDK
 469         bool "Support mx35pdk"
 470         select BOARD_LATE_INIT
 471         select CPU_ARM1136
 472
 473 config ARCH_BCM283X
 474         bool "Broadcom BCM283X family"
 475         select DM
 476         select DM_SERIAL
 477         select DM_GPIO
 478         select OF_CONTROL
 479
 480 config TARGET_VEXPRESS_CA15_TC2
 481         bool "Support vexpress_ca15_tc2"
 482         select CPU_V7
 483         select CPU_V7_HAS_NONSEC
 484         select CPU_V7_HAS_VIRT
 485
 486 config TARGET_VEXPRESS_CA5X2
 487         bool "Support vexpress_ca5x2"
 488         select CPU_V7
 489
 490 config TARGET_VEXPRESS_CA9X4
 491         bool "Support vexpress_ca9x4"
 492         select CPU_V7
 493
 494 config TARGET_BCM23550_W1D
 495         bool "Support bcm23550_w1d"
 496         select CPU_V7
 497
 498 config TARGET_BCM28155_AP
 499         bool "Support bcm28155_ap"
 500         select CPU_V7
 501
 502 config TARGET_BCMCYGNUS
 503         bool "Support bcmcygnus"
 504         select CPU_V7
 505
 506 config TARGET_BCMNSP
 507         bool "Support bcmnsp"
 508         select CPU_V7
 509
 510 config TARGET_BCMNS2
 511         bool "Support Broadcom Northstar2"
 512         select ARM64
 513         help
 514           Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
 515           ARMv8 Cortex-A57 processors targeting a broad range of networking
 516           applications
 517
 518 config ARCH_EXYNOS
 519         bool "Samsung EXYNOS"
 520         select DM
 521         select DM_I2C
 522         select DM_SPI_FLASH
 523         select DM_SERIAL
 524         select DM_SPI
 525         select DM_GPIO
 526         select DM_KEYBOARD
 527
 528 config ARCH_S5PC1XX
 529         bool "Samsung S5PC1XX"
 530         select CPU_V7
 531         select DM
 532         select DM_SERIAL
 533         select DM_GPIO
 534         select DM_I2C
 535
 536 config ARCH_HIGHBANK
 537         bool "Calxeda Highbank"
 538         select CPU_V7
 539
 540 config ARCH_INTEGRATOR
 541         bool "ARM Ltd. Integrator family"
 542         select DM
 543         select DM_SERIAL
 544
 545 config ARCH_KEYSTONE
 546         bool "TI Keystone"
 547         select CPU_V7
 548         select SUPPORT_SPL
 549         select SYS_THUMB_BUILD
 550         select CMD_POWEROFF
 551         imply FIT
 552
 553 config ARCH_OMAP2PLUS
 554         bool "TI OMAP2+"
 555         select CPU_V7
 556         select SUPPORT_SPL
 557         imply FIT
 558
 559 config ARCH_MESON
 560         bool "Amlogic Meson"
 561         help
 562           Support for the Meson SoC family developed by Amlogic Inc.,
 563           targeted at media players and tablet computers. We currently
 564           support the S905 (GXBaby) 64-bit SoC.
 565
 566 config ARCH_MX7ULP
 567         bool "NXP MX7ULP"
 568         select CPU_V7
 569         select ROM_UNIFIED_SECTIONS
 570
 571 config ARCH_MX7
 572         bool "Freescale MX7"
 573         select CPU_V7
 574         select SYS_FSL_HAS_SEC if SECURE_BOOT
 575         select SYS_FSL_SEC_COMPAT_4
 576         select SYS_FSL_SEC_LE
 577         select BOARD_EARLY_INIT_F
 578         select ARCH_MISC_INIT
 579
 580 config ARCH_MX6
 581         bool "Freescale MX6"
 582         select CPU_V7
 583         select SYS_FSL_HAS_SEC if SECURE_BOOT
 584         select SYS_FSL_SEC_COMPAT_4
 585         select SYS_FSL_SEC_LE
 586         select SYS_THUMB_BUILD if SPL
 587
 588 config ARCH_MX5
 589         bool "Freescale MX5"
 590         select CPU_V7
 591         select BOARD_EARLY_INIT_F
 592
 593 config ARCH_RMOBILE
 594         bool "Renesas ARM SoCs"
 595         select DM
 596         select DM_SERIAL
 597         select BOARD_EARLY_INIT_F
 598         imply SYS_THUMB_BUILD
 599
 600 config TARGET_S32V234EVB
 601         bool "Support s32v234evb"
 602         select ARM64
 603         select SYS_FSL_ERRATUM_ESDHC111
 604
 605 config ARCH_SNAPDRAGON
 606         bool "Qualcomm Snapdragon SoCs"
 607         select ARM64
 608         select DM
 609         select DM_GPIO
 610         select DM_SERIAL
 611         select SPMI
 612         select OF_CONTROL
 613         select OF_SEPARATE
 614
 615 config ARCH_SOCFPGA
 616         bool "Altera SOCFPGA family"
 617         select CPU_V7
 618         select SUPPORT_SPL
 619         select OF_CONTROL
 620         select SPL_OF_CONTROL
 621         select DM
 622         select DM_SPI_FLASH
 623         select DM_SPI
 624         select ENABLE_ARM_SOC_BOOT0_HOOK
 625         select ARCH_EARLY_INIT_R
 626         select ARCH_MISC_INIT
 627         select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 628         select SYS_THUMB_BUILD
 629
 630 config ARCH_SUNXI
 631         bool "Support sunxi (Allwinner) SoCs"
 632         select CMD_GPIO
 633         select CMD_MMC if MMC
 634         select CMD_USB if DISTRO_DEFAULTS
 635         select DM
 636         select DM_ETH
 637         select DM_GPIO
 638         select DM_KEYBOARD
 639         select DM_SERIAL
 640         select DM_USB if DISTRO_DEFAULTS
 641         select OF_BOARD_SETUP
 642         select OF_CONTROL
 643         select OF_SEPARATE
 644         select SPL_STACK_R if SUPPORT_SPL
 645         select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
 646         select SYS_NS16550
 647         select SPL_SYS_THUMB_BUILD if !ARM64
 648         select USB if DISTRO_DEFAULTS
 649         select USB_STORAGE if DISTRO_DEFAULTS
 650         select USB_KEYBOARD if DISTRO_DEFAULTS
 651         select USE_TINY_PRINTF
 652         imply PRE_CONSOLE_BUFFER
 653         imply SPL_GPIO_SUPPORT
 654         imply SPL_LIBCOMMON_SUPPORT
 655         imply SPL_LIBDISK_SUPPORT
 656         imply SPL_LIBGENERIC_SUPPORT
 657         imply SPL_MMC_SUPPORT if GENERIC_MMC
 658         imply SPL_POWER_SUPPORT
 659         imply SPL_SERIAL_SUPPORT
 660
 661 config TARGET_TS4600
 662         bool "Support TS4600"
 663         select CPU_ARM926EJS
 664         select SUPPORT_SPL
 665
 666 config ARCH_VF610
 667         bool "Freescale Vybrid"
 668         select CPU_V7
 669         select SYS_FSL_ERRATUM_ESDHC111
 670
 671 config ARCH_ZYNQ
 672         bool "Xilinx Zynq Platform"
 673         select BOARD_LATE_INIT
 674         select CPU_V7
 675         select SUPPORT_SPL
 676         select OF_CONTROL
 677         select SPL_OF_CONTROL if SPL
 678         select DM
 679         select DM_ETH
 680         select DM_GPIO
 681         select SPL_DM if SPL
 682         select DM_MMC
 683         select DM_MMC_OPS
 684         select DM_SPI
 685         select DM_SERIAL
 686         select DM_SPI_FLASH
 687         select SPL_SEPARATE_BSS if SPL
 688         select DM_USB if USB
 689         select BLK
 690         select CLK
 691         select SPL_CLK
 692         select CLK_ZYNQ
 693         imply CMD_CLK
 694
 695 config ARCH_ZYNQMP
 696         bool "Support Xilinx ZynqMP Platform"
 697         select ARM64
 698         select BOARD_LATE_INIT
 699         select DM
 700         select OF_CONTROL
 701         select DM_SERIAL
 702         select SUPPORT_SPL
 703         select CLK
 704         select SPL_CLK
 705         select DM_USB if USB
 706
 707 config TEGRA
 708         bool "NVIDIA Tegra"
 709
 710 config TARGET_VEXPRESS64_AEMV8A
 711         bool "Support vexpress_aemv8a"
 712         select ARM64
 713
 714 config TARGET_VEXPRESS64_BASE_FVP
 715         bool "Support Versatile Express ARMv8a FVP BASE model"
 716         select ARM64
 717         select SEMIHOSTING
 718
 719 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 720         bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 721         select ARM64
 722         help
 723           This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 724           the default config to allow the user to load the images directly into
 725           DRAM using model parameters rather than by using semi-hosting to load
 726           the files from the host filesystem.
 727
 728 config TARGET_VEXPRESS64_JUNO
 729         bool "Support Versatile Express Juno Development Platform"
 730         select ARM64
 731
 732 config TARGET_LS2080A_EMU
 733         bool "Support ls2080a_emu"
 734         select ARCH_LS2080A
 735         select ARM64
 736         select ARMV8_MULTIENTRY
 737         select ARCH_MISC_INIT
 738         help
 739           Support for Freescale LS2080A_EMU platform
 740           The LS2080A Development System (EMULATOR) is a pre silicon
 741           development platform that supports the QorIQ LS2080A
 742           Layerscape Architecture processor.
 743
 744 config TARGET_LS2080A_SIMU
 745         bool "Support ls2080a_simu"
 746         select ARCH_LS2080A
 747         select ARM64
 748         select ARMV8_MULTIENTRY
 749         select ARCH_MISC_INIT
 750         help
 751           Support for Freescale LS2080A_SIMU platform
 752           The LS2080A Development System (QDS) is a pre silicon
 753           development platform that supports the QorIQ LS2080A
 754           Layerscape Architecture processor.
 755
 756 config TARGET_LS2080AQDS
 757         bool "Support ls2080aqds"
 758         select ARCH_LS2080A
 759         select ARM64
 760         select ARMV8_MULTIENTRY
 761         select BOARD_LATE_INIT
 762         select SUPPORT_SPL
 763         select ARCH_MISC_INIT
 764         help
 765           Support for Freescale LS2080AQDS platform
 766           The LS2080A Development System (QDS) is a high-performance
 767           development platform that supports the QorIQ LS2080A
 768           Layerscape Architecture processor.
 769
 770 config TARGET_LS2080ARDB
 771         bool "Support ls2080ardb"
 772         select ARCH_LS2080A
 773         select ARM64
 774         select ARMV8_MULTIENTRY
 775         select BOARD_LATE_INIT
 776         select SUPPORT_SPL
 777         select ARCH_MISC_INIT
 778         help
 779           Support for Freescale LS2080ARDB platform.
 780           The LS2080A Reference design board (RDB) is a high-performance
 781           development platform that supports the QorIQ LS2080A
 782           Layerscape Architecture processor.
 783
 784 config TARGET_HIKEY
 785         bool "Support HiKey 96boards Consumer Edition Platform"
 786         select ARM64
 787         select DM
 788         select DM_GPIO
 789         select DM_SERIAL
 790         select OF_CONTROL
 791           help
 792           Support for HiKey 96boards platform. It features a HI6220
 793           SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 794
 795 config TARGET_LS1012AQDS
 796         bool "Support ls1012aqds"
 797         select ARCH_LS1012A
 798         select ARM64
 799         select BOARD_LATE_INIT
 800         help
 801           Support for Freescale LS1012AQDS platform.
 802           The LS1012A Development System (QDS) is a high-performance
 803           development platform that supports the QorIQ LS1012A
 804           Layerscape Architecture processor.
 805
 806 config TARGET_LS1012ARDB
 807         bool "Support ls1012ardb"
 808         select ARCH_LS1012A
 809         select ARM64
 810         select BOARD_LATE_INIT
 811         help
 812           Support for Freescale LS1012ARDB platform.
 813           The LS1012A Reference design board (RDB) is a high-performance
 814           development platform that supports the QorIQ LS1012A
 815           Layerscape Architecture processor.
 816
 817 config TARGET_LS1012AFRDM
 818         bool "Support ls1012afrdm"
 819         select ARCH_LS1012A
 820         select ARM64
 821         help
 822           Support for Freescale LS1012AFRDM platform.
 823           The LS1012A Freedom  board (FRDM) is a high-performance
 824           development platform that supports the QorIQ LS1012A
 825           Layerscape Architecture processor.
 826
 827 config TARGET_LS1021AQDS
 828         bool "Support ls1021aqds"
 829         select BOARD_LATE_INIT
 830         select CPU_V7
 831         select CPU_V7_HAS_NONSEC
 832         select CPU_V7_HAS_VIRT
 833         select SUPPORT_SPL
 834         select ARCH_LS1021A
 835         select ARCH_SUPPORT_PSCI
 836         select LS1_DEEP_SLEEP
 837         select SYS_FSL_DDR
 838         select BOARD_EARLY_INIT_F
 839
 840 config TARGET_LS1021ATWR
 841         bool "Support ls1021atwr"
 842         select BOARD_LATE_INIT
 843         select CPU_V7
 844         select CPU_V7_HAS_NONSEC
 845         select CPU_V7_HAS_VIRT
 846         select SUPPORT_SPL
 847         select ARCH_LS1021A
 848         select ARCH_SUPPORT_PSCI
 849         select LS1_DEEP_SLEEP
 850         select BOARD_EARLY_INIT_F
 851
 852 config TARGET_LS1021AIOT
 853         bool "Support ls1021aiot"
 854         select BOARD_LATE_INIT
 855         select CPU_V7
 856         select CPU_V7_HAS_NONSEC
 857         select CPU_V7_HAS_VIRT
 858         select SUPPORT_SPL
 859         select ARCH_LS1021A
 860         select ARCH_SUPPORT_PSCI
 861         help
 862           Support for Freescale LS1021AIOT platform.
 863           The LS1021A Freescale board (IOT) is a high-performance
 864           development platform that supports the QorIQ LS1021A
 865           Layerscape Architecture processor.
 866
 867 config TARGET_LS1043AQDS
 868         bool "Support ls1043aqds"
 869         select ARCH_LS1043A
 870         select ARM64
 871         select ARMV8_MULTIENTRY
 872         select BOARD_LATE_INIT
 873         select SUPPORT_SPL
 874         select BOARD_EARLY_INIT_F
 875         help
 876           Support for Freescale LS1043AQDS platform.
 877
 878 config TARGET_LS1043ARDB
 879         bool "Support ls1043ardb"
 880         select ARCH_LS1043A
 881         select ARM64
 882         select ARMV8_MULTIENTRY
 883         select BOARD_LATE_INIT
 884         select SUPPORT_SPL
 885         select BOARD_EARLY_INIT_F
 886         help
 887           Support for Freescale LS1043ARDB platform.
 888
 889 config TARGET_LS1046AQDS
 890         bool "Support ls1046aqds"
 891         select ARCH_LS1046A
 892         select ARM64
 893         select ARMV8_MULTIENTRY
 894         select BOARD_LATE_INIT
 895         select SUPPORT_SPL
 896         select DM_SPI_FLASH if DM_SPI
 897         select BOARD_EARLY_INIT_F
 898         help
 899           Support for Freescale LS1046AQDS platform.
 900           The LS1046A Development System (QDS) is a high-performance
 901           development platform that supports the QorIQ LS1046A
 902           Layerscape Architecture processor.
 903
 904 config TARGET_LS1046ARDB
 905         bool "Support ls1046ardb"
 906         select ARCH_LS1046A
 907         select ARM64
 908         select ARMV8_MULTIENTRY
 909         select BOARD_LATE_INIT
 910         select SUPPORT_SPL
 911         select DM_SPI_FLASH if DM_SPI
 912         select POWER_MC34VR500
 913         select BOARD_EARLY_INIT_F
 914         help
 915           Support for Freescale LS1046ARDB platform.
 916           The LS1046A Reference Design Board (RDB) is a high-performance
 917           development platform that supports the QorIQ LS1046A
 918           Layerscape Architecture processor.
 919
 920 config TARGET_H2200
 921         bool "Support h2200"
 922         select CPU_PXA
 923
 924 config TARGET_ZIPITZ2
 925         bool "Support zipitz2"
 926         select CPU_PXA
 927
 928 config TARGET_COLIBRI_PXA270
 929         bool "Support colibri_pxa270"
 930         select CPU_PXA
 931
 932 config ARCH_UNIPHIER
 933         bool "Socionext UniPhier SoCs"
 934         select BOARD_LATE_INIT
 935         select CLK_UNIPHIER
 936         select DM
 937         select DM_GPIO
 938         select DM_I2C
 939         select DM_MMC
 940         select DM_RESET
 941         select DM_SERIAL
 942         select DM_USB
 943         select OF_CONTROL
 944         select OF_LIBFDT
 945         select PINCTRL
 946         select SPL_DM if SPL
 947         select SPL_LIBCOMMON_SUPPORT if SPL
 948         select SPL_LIBGENERIC_SUPPORT if SPL
 949         select SPL_OF_CONTROL if SPL
 950         select SPL_PINCTRL if SPL
 951         select SUPPORT_SPL
 952         help
 953           Support for UniPhier SoC family developed by Socionext Inc.
 954           (formerly, System LSI Business Division of Panasonic Corporation)
 955
 956 config STM32
 957         bool "Support STM32"
 958         select CPU_V7M
 959         select DM
 960         select DM_SERIAL
 961         select SYS_THUMB_BUILD
 962
 963 config ARCH_STI
 964         bool "Support STMicrolectronics SoCs"
 965         select CPU_V7
 966         select DM
 967         select DM_SERIAL
 968         select BLK
 969         select DM_MMC
 970         select DM_RESET
 971         help
 972           Support for STMicroelectronics STiH407/10 SoC family.
 973           This SoC is used on Linaro 96Board STiH410-B2260
 974
 975 config ARCH_ROCKCHIP
 976         bool "Support Rockchip SoCs"
 977         select OF_CONTROL
 978         select BLK
 979         select DM
 980         select SPL_DM if SPL
 981         select SYS_MALLOC_F
 982         select SYS_THUMB_BUILD if !ARM64
 983         select SPL_SYS_MALLOC_SIMPLE if SPL
 984         select DM_GPIO
 985         select DM_I2C
 986         select DM_MMC
 987         select DM_MMC_OPS
 988         select DM_SERIAL
 989         select DM_SPI
 990         select DM_SPI_FLASH
 991         select DM_USB if USB
 992         select DM_PWM
 993         select DM_REGULATOR
 994
 995 config TARGET_THUNDERX_88XX
 996         bool "Support ThunderX 88xx"
 997         select ARM64
 998         select OF_CONTROL
 999         select SYS_CACHE_SHIFT_7
1000
1001 config ARCH_ASPEED
1002         bool "Support Aspeed SoCs"
1003         select OF_CONTROL
1004         select DM
1005
1006 endchoice
1007
1008 source "arch/arm/mach-aspeed/Kconfig"
1009
1010 source "arch/arm/mach-at91/Kconfig"
1011
1012 source "arch/arm/mach-bcm283x/Kconfig"
1013
1014 source "arch/arm/mach-davinci/Kconfig"
1015
1016 source "arch/arm/mach-exynos/Kconfig"
1017
1018 source "arch/arm/mach-highbank/Kconfig"
1019
1020 source "arch/arm/mach-integrator/Kconfig"
1021
1022 source "arch/arm/mach-keystone/Kconfig"
1023
1024 source "arch/arm/mach-kirkwood/Kconfig"
1025
1026 source "arch/arm/mach-mvebu/Kconfig"
1027
1028 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1029
1030 source "arch/arm/cpu/armv7/mx7ulp/Kconfig"
1031
1032 source "arch/arm/cpu/armv7/mx7/Kconfig"
1033
1034 source "arch/arm/cpu/armv7/mx6/Kconfig"
1035
1036 source "arch/arm/cpu/armv7/mx5/Kconfig"
1037
1038 source "arch/arm/mach-omap2/Kconfig"
1039
1040 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1041
1042 source "arch/arm/mach-orion5x/Kconfig"
1043
1044 source "arch/arm/mach-rmobile/Kconfig"
1045
1046 source "arch/arm/mach-meson/Kconfig"
1047
1048 source "arch/arm/mach-rockchip/Kconfig"
1049
1050 source "arch/arm/mach-s5pc1xx/Kconfig"
1051
1052 source "arch/arm/mach-snapdragon/Kconfig"
1053
1054 source "arch/arm/mach-socfpga/Kconfig"
1055
1056 source "arch/arm/mach-sti/Kconfig"
1057
1058 source "arch/arm/mach-stm32/Kconfig"
1059
1060 source "arch/arm/mach-sunxi/Kconfig"
1061
1062 source "arch/arm/mach-tegra/Kconfig"
1063
1064 source "arch/arm/mach-uniphier/Kconfig"
1065
1066 source "arch/arm/cpu/armv7/vf610/Kconfig"
1067
1068 source "arch/arm/mach-zynq/Kconfig"
1069
1070 source "arch/arm/cpu/armv7/Kconfig"
1071
1072 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1073
1074 source "arch/arm/cpu/armv8/Kconfig"
1075
1076 source "arch/arm/imx-common/Kconfig"
1077
1078 source "board/aries/m28evk/Kconfig"
1079 source "board/bosch/shc/Kconfig"
1080 source "board/CarMediaLab/flea3/Kconfig"
1081 source "board/Marvell/aspenite/Kconfig"
1082 source "board/Marvell/gplugd/Kconfig"
1083 source "board/armadeus/apf27/Kconfig"
1084 source "board/armltd/vexpress/Kconfig"
1085 source "board/armltd/vexpress64/Kconfig"
1086 source "board/bluegiga/apx4devkit/Kconfig"
1087 source "board/broadcom/bcm23550_w1d/Kconfig"
1088 source "board/broadcom/bcm28155_ap/Kconfig"
1089 source "board/broadcom/bcmcygnus/Kconfig"
1090 source "board/broadcom/bcmnsp/Kconfig"
1091 source "board/broadcom/bcmns2/Kconfig"
1092 source "board/cavium/thunderx/Kconfig"
1093 source "board/cirrus/edb93xx/Kconfig"
1094 source "board/creative/xfi3/Kconfig"
1095 source "board/freescale/ls2080a/Kconfig"
1096 source "board/freescale/ls2080aqds/Kconfig"
1097 source "board/freescale/ls2080ardb/Kconfig"
1098 source "board/freescale/ls1021aqds/Kconfig"
1099 source "board/freescale/ls1043aqds/Kconfig"
1100 source "board/freescale/ls1021atwr/Kconfig"
1101 source "board/freescale/ls1021aiot/Kconfig"
1102 source "board/freescale/ls1046aqds/Kconfig"
1103 source "board/freescale/ls1043ardb/Kconfig"
1104 source "board/freescale/ls1046ardb/Kconfig"
1105 source "board/freescale/ls1012aqds/Kconfig"
1106 source "board/freescale/ls1012ardb/Kconfig"
1107 source "board/freescale/ls1012afrdm/Kconfig"
1108 source "board/freescale/mx23evk/Kconfig"
1109 source "board/freescale/mx25pdk/Kconfig"
1110 source "board/freescale/mx28evk/Kconfig"
1111 source "board/freescale/mx31ads/Kconfig"
1112 source "board/freescale/mx31pdk/Kconfig"
1113 source "board/freescale/mx35pdk/Kconfig"
1114 source "board/freescale/s32v234evb/Kconfig"
1115 source "board/gdsys/a38x/Kconfig"
1116 source "board/grinn/chiliboard/Kconfig"
1117 source "board/gumstix/pepper/Kconfig"
1118 source "board/h2200/Kconfig"
1119 source "board/hisilicon/hikey/Kconfig"
1120 source "board/imx31_phycore/Kconfig"
1121 source "board/isee/igep003x/Kconfig"
1122 source "board/olimex/mx23_olinuxino/Kconfig"
1123 source "board/phytec/pcm051/Kconfig"
1124 source "board/ppcag/bg0900/Kconfig"
1125 source "board/sandisk/sansa_fuze_plus/Kconfig"
1126 source "board/schulercontrol/sc_sps_1/Kconfig"
1127 source "board/silica/pengwyn/Kconfig"
1128 source "board/spear/spear300/Kconfig"
1129 source "board/spear/spear310/Kconfig"
1130 source "board/spear/spear320/Kconfig"
1131 source "board/spear/spear600/Kconfig"
1132 source "board/spear/x600/Kconfig"
1133 source "board/st/stv0991/Kconfig"
1134 source "board/syteco/zmx25/Kconfig"
1135 source "board/tcl/sl50/Kconfig"
1136 source "board/birdland/bav335x/Kconfig"
1137 source "board/timll/devkit3250/Kconfig"
1138 source "board/toradex/colibri_pxa270/Kconfig"
1139 source "board/technologic/ts4600/Kconfig"
1140 source "board/vscom/baltos/Kconfig"
1141 source "board/woodburn/Kconfig"
1142 source "board/work-microwave/work_92105/Kconfig"
1143 source "board/zipitz2/Kconfig"
1144
1145 source "arch/arm/Kconfig.debug"
1146
1147 endmenu