arch/arm/Kconfig

   1 menu "ARM architecture"
   2         depends on ARM
   3
   4 config SYS_ARCH
   5         default "arm"
   6
   7 config ARM64
   8         bool
   9         select PHYS_64BIT
  10         select SYS_CACHE_SHIFT_6
  11
  12 config DMA_ADDR_T_64BIT
  13         bool
  14         default y if ARM64
  15
  16 config HAS_VBAR
  17         bool
  18
  19 config HAS_THUMB2
  20         bool
  21
  22 # If set, the workarounds for these ARM errata are applied early during U-Boot
  23 # startup. Note that in general these options force the workarounds to be
  24 # applied; no CPU-type/version detection exists, unlike the similar options in
  25 # the Linux kernel. Do not set these options unless they apply!  Also note that
  26 # the following can be machine specific errata. These do have ability to
  27 # provide rudimentary version and machine specific checks, but expect no
  28 # product checks:
  29 # CONFIG_ARM_ERRATA_430973
  30 # CONFIG_ARM_ERRATA_454179
  31 # CONFIG_ARM_ERRATA_621766
  32 # CONFIG_ARM_ERRATA_798870
  33 # CONFIG_ARM_ERRATA_801819
  34 config ARM_ERRATA_430973
  35         bool
  36
  37 config ARM_ERRATA_454179
  38         bool
  39
  40 config ARM_ERRATA_621766
  41         bool
  42
  43 config ARM_ERRATA_716044
  44         bool
  45
  46 config ARM_ERRATA_725233
  47         bool
  48
  49 config ARM_ERRATA_742230
  50         bool
  51
  52 config ARM_ERRATA_743622
  53         bool
  54
  55 config ARM_ERRATA_751472
  56         bool
  57
  58 config ARM_ERRATA_761320
  59         bool
  60
  61 config ARM_ERRATA_773022
  62         bool
  63
  64 config ARM_ERRATA_774769
  65         bool
  66
  67 config ARM_ERRATA_794072
  68         bool
  69
  70 config ARM_ERRATA_798870
  71         bool
  72
  73 config ARM_ERRATA_801819
  74         bool
  75
  76 config ARM_ERRATA_826974
  77         bool
  78
  79 config ARM_ERRATA_828024
  80         bool
  81
  82 config ARM_ERRATA_829520
  83         bool
  84
  85 config ARM_ERRATA_833069
  86         bool
  87
  88 config ARM_ERRATA_833471
  89         bool
  90
  91 config ARM_ERRATA_852421
  92         bool
  93
  94 config ARM_ERRATA_852423
  95         bool
  96
  97 config CPU_ARM720T
  98         bool
  99         select SYS_CACHE_SHIFT_5
 100
 101 config CPU_ARM920T
 102         bool
 103         select SYS_CACHE_SHIFT_5
 104
 105 config CPU_ARM926EJS
 106         bool
 107         select SYS_CACHE_SHIFT_5
 108
 109 config CPU_ARM946ES
 110         bool
 111         select SYS_CACHE_SHIFT_5
 112
 113 config CPU_ARM1136
 114         bool
 115         select SYS_CACHE_SHIFT_5
 116
 117 config CPU_ARM1176
 118         bool
 119         select HAS_VBAR
 120         select SYS_CACHE_SHIFT_5
 121
 122 config CPU_V7
 123         bool
 124         select HAS_VBAR
 125         select HAS_THUMB2
 126         select SYS_CACHE_SHIFT_6
 127
 128 config CPU_V7M
 129         bool
 130         select HAS_THUMB2
 131         select SYS_CACHE_SHIFT_5
 132
 133 config CPU_PXA
 134         bool
 135         select SYS_CACHE_SHIFT_5
 136
 137 config CPU_SA1100
 138         bool
 139         select SYS_CACHE_SHIFT_5
 140
 141 config SYS_CPU
 142         default "arm720t" if CPU_ARM720T
 143         default "arm920t" if CPU_ARM920T
 144         default "arm926ejs" if CPU_ARM926EJS
 145         default "arm946es" if CPU_ARM946ES
 146         default "arm1136" if CPU_ARM1136
 147         default "arm1176" if CPU_ARM1176
 148         default "armv7" if CPU_V7
 149         default "armv7m" if CPU_V7M
 150         default "pxa" if CPU_PXA
 151         default "sa1100" if CPU_SA1100
 152         default "armv8" if ARM64
 153
 154 config SYS_ARM_ARCH
 155         int
 156         default 4 if CPU_ARM720T
 157         default 4 if CPU_ARM920T
 158         default 5 if CPU_ARM926EJS
 159         default 5 if CPU_ARM946ES
 160         default 6 if CPU_ARM1136
 161         default 6 if CPU_ARM1176
 162         default 7 if CPU_V7
 163         default 7 if CPU_V7M
 164         default 5 if CPU_PXA
 165         default 4 if CPU_SA1100
 166         default 8 if ARM64
 167
 168 config SYS_CACHE_SHIFT_5
 169         bool
 170
 171 config SYS_CACHE_SHIFT_6
 172         bool
 173
 174 config SYS_CACHE_SHIFT_7
 175         bool
 176
 177 config SYS_CACHELINE_SIZE
 178         int
 179         default 128 if SYS_CACHE_SHIFT_7
 180         default 64 if SYS_CACHE_SHIFT_6
 181         default 32 if SYS_CACHE_SHIFT_5
 182
 183 config ARM_SMCCC
 184         bool "Support for ARM SMC Calling Convention (SMCCC)"
 185         depends on CPU_V7 || ARM64
 186         select ARM_PSCI_FW
 187         help
 188           Say Y here if you want to enable ARM SMC Calling Convention.
 189           This should be enabled if U-Boot needs to communicate with system
 190           firmware (for example, PSCI) according to SMCCC.
 191
 192 config SEMIHOSTING
 193         bool "support boot from semihosting"
 194         help
 195           In emulated environments, semihosting is a way for
 196           the hosted environment to call out to the emulator to
 197           retrieve files from the host machine.
 198
 199 config SYS_THUMB_BUILD
 200         bool "Build U-Boot using the Thumb instruction set"
 201         depends on !ARM64
 202         help
 203            Use this flag to build U-Boot using the Thumb instruction set for
 204            ARM architectures. Thumb instruction set provides better code
 205            density. For ARM architectures that support Thumb2 this flag will
 206            result in Thumb2 code generated by GCC.
 207
 208 config SPL_SYS_THUMB_BUILD
 209         bool "Build SPL using the Thumb instruction set"
 210         default y if SYS_THUMB_BUILD
 211         depends on !ARM64
 212         help
 213            Use this flag to build SPL using the Thumb instruction set for
 214            ARM architectures. Thumb instruction set provides better code
 215            density. For ARM architectures that support Thumb2 this flag will
 216            result in Thumb2 code generated by GCC.
 217
 218 config SYS_L2CACHE_OFF
 219         bool "L2cache off"
 220         help
 221           If SoC does not support L2CACHE or one do not want to enable
 222           L2CACHE, choose this option.
 223
 224 config ENABLE_ARM_SOC_BOOT0_HOOK
 225         bool "prepare BOOT0 header"
 226         help
 227           If the SoC's BOOT0 requires a header area filled with (magic)
 228           values, then choose this option, and create a define called
 229           ARM_SOC_BOOT0_HOOK which contains the required assembler
 230           preprocessor code.
 231
 232 config ARM_CORTEX_CPU_IS_UP
 233         bool
 234         default n
 235
 236 config USE_ARCH_MEMCPY
 237         bool "Use an assembly optimized implementation of memcpy"
 238         default y
 239         depends on !ARM64
 240         help
 241           Enable the generation of an optimized version of memcpy.
 242           Such implementation may be faster under some conditions
 243           but may increase the binary size.
 244
 245 config SPL_USE_ARCH_MEMCPY
 246         bool "Use an assembly optimized implementation of memcpy"
 247         default y if USE_ARCH_MEMCPY
 248         depends on !ARM64
 249         help
 250           Enable the generation of an optimized version of memcpy.
 251           Such implementation may be faster under some conditions
 252           but may increase the binary size.
 253
 254 config USE_ARCH_MEMSET
 255         bool "Use an assembly optimized implementation of memset"
 256         default y
 257         depends on !ARM64
 258         help
 259           Enable the generation of an optimized version of memset.
 260           Such implementation may be faster under some conditions
 261           but may increase the binary size.
 262
 263 config SPL_USE_ARCH_MEMSET
 264         bool "Use an assembly optimized implementation of memset"
 265         default y if USE_ARCH_MEMSET
 266         depends on !ARM64
 267         help
 268           Enable the generation of an optimized version of memset.
 269           Such implementation may be faster under some conditions
 270           but may increase the binary size.
 271
 272 config ARM64_SUPPORT_AARCH32
 273         bool "ARM64 system support AArch32 execution state"
 274         default y if ARM64 && !TARGET_THUNDERX_88XX
 275         help
 276           This ARM64 system supports AArch32 execution state.
 277
 278 choice
 279         prompt "Target select"
 280         default TARGET_HIKEY
 281
 282 config ARCH_AT91
 283         bool "Atmel AT91"
 284         select SPL_BOARD_INIT if SPL
 285
 286 config TARGET_EDB93XX
 287         bool "Support edb93xx"
 288         select CPU_ARM920T
 289
 290 config TARGET_ASPENITE
 291         bool "Support aspenite"
 292         select CPU_ARM926EJS
 293
 294 config TARGET_GPLUGD
 295         bool "Support gplugd"
 296         select CPU_ARM926EJS
 297
 298 config ARCH_DAVINCI
 299         bool "TI DaVinci"
 300         select CPU_ARM926EJS
 301         help
 302           Support for TI's DaVinci platform.
 303
 304 config KIRKWOOD
 305         bool "Marvell Kirkwood"
 306         select CPU_ARM926EJS
 307         select BOARD_EARLY_INIT_F
 308         select ARCH_MISC_INIT
 309
 310 config ARCH_MVEBU
 311         bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 312         select OF_CONTROL
 313         select OF_SEPARATE
 314         select DM
 315         select DM_ETH
 316         select DM_SERIAL
 317         select DM_SPI
 318         select DM_SPI_FLASH
 319
 320 config TARGET_DEVKIT3250
 321         bool "Support devkit3250"
 322         select CPU_ARM926EJS
 323         select SUPPORT_SPL
 324
 325 config TARGET_WORK_92105
 326         bool "Support work_92105"
 327         select CPU_ARM926EJS
 328         select SUPPORT_SPL
 329
 330 config TARGET_MX25PDK
 331         bool "Support mx25pdk"
 332         select BOARD_LATE_INIT
 333         select CPU_ARM926EJS
 334         select BOARD_EARLY_INIT_F
 335
 336 config TARGET_ZMX25
 337         bool "Support zmx25"
 338         select BOARD_LATE_INIT
 339         select CPU_ARM926EJS
 340
 341 config TARGET_APF27
 342         bool "Support apf27"
 343         select CPU_ARM926EJS
 344         select SUPPORT_SPL
 345
 346 config TARGET_APX4DEVKIT
 347         bool "Support apx4devkit"
 348         select CPU_ARM926EJS
 349         select SUPPORT_SPL
 350
 351 config TARGET_XFI3
 352         bool "Support xfi3"
 353         select CPU_ARM926EJS
 354         select SUPPORT_SPL
 355
 356 config TARGET_M28EVK
 357         bool "Support m28evk"
 358         select CPU_ARM926EJS
 359         select SUPPORT_SPL
 360
 361 config TARGET_MX23EVK
 362         bool "Support mx23evk"
 363         select CPU_ARM926EJS
 364         select SUPPORT_SPL
 365         select BOARD_EARLY_INIT_F
 366
 367 config TARGET_MX28EVK
 368         bool "Support mx28evk"
 369         select CPU_ARM926EJS
 370         select SUPPORT_SPL
 371         select BOARD_EARLY_INIT_F
 372
 373 config TARGET_MX23_OLINUXINO
 374         bool "Support mx23_olinuxino"
 375         select CPU_ARM926EJS
 376         select SUPPORT_SPL
 377         select BOARD_EARLY_INIT_F
 378
 379 config TARGET_BG0900
 380         bool "Support bg0900"
 381         select CPU_ARM926EJS
 382         select SUPPORT_SPL
 383
 384 config TARGET_SANSA_FUZE_PLUS
 385         bool "Support sansa_fuze_plus"
 386         select CPU_ARM926EJS
 387         select SUPPORT_SPL
 388
 389 config TARGET_SC_SPS_1
 390         bool "Support sc_sps_1"
 391         select CPU_ARM926EJS
 392         select SUPPORT_SPL
 393
 394 config ORION5X
 395         bool "Marvell Orion"
 396         select CPU_ARM926EJS
 397
 398 config TARGET_SPEAR300
 399         bool "Support spear300"
 400         select CPU_ARM926EJS
 401         select BOARD_EARLY_INIT_F
 402
 403 config TARGET_SPEAR310
 404         bool "Support spear310"
 405         select CPU_ARM926EJS
 406         select BOARD_EARLY_INIT_F
 407
 408 config TARGET_SPEAR320
 409         bool "Support spear320"
 410         select CPU_ARM926EJS
 411         select BOARD_EARLY_INIT_F
 412
 413 config TARGET_SPEAR600
 414         bool "Support spear600"
 415         select CPU_ARM926EJS
 416         select BOARD_EARLY_INIT_F
 417
 418 config TARGET_STV0991
 419         bool "Support stv0991"
 420         select CPU_V7
 421         select DM
 422         select DM_SERIAL
 423         select DM_SPI
 424         select DM_SPI_FLASH
 425         select SPI_FLASH
 426
 427 config TARGET_X600
 428         bool "Support x600"
 429         select BOARD_LATE_INIT
 430         select CPU_ARM926EJS
 431         select SUPPORT_SPL
 432
 433 config TARGET_IMX31_PHYCORE
 434         bool "Support imx31_phycore_eet"
 435         select CPU_ARM1136
 436         select BOARD_EARLY_INIT_F
 437
 438 config TARGET_IMX31_PHYCORE_EET
 439         bool "Support imx31_phycore_eet"
 440         select BOARD_LATE_INIT
 441         select CPU_ARM1136
 442         select BOARD_EARLY_INIT_F
 443
 444 config TARGET_MX31ADS
 445         bool "Support mx31ads"
 446         select CPU_ARM1136
 447         select BOARD_EARLY_INIT_F
 448
 449 config TARGET_MX31PDK
 450         bool "Support mx31pdk"
 451         select BOARD_LATE_INIT
 452         select CPU_ARM1136
 453         select SUPPORT_SPL
 454         select BOARD_EARLY_INIT_F
 455
 456 config TARGET_WOODBURN
 457         bool "Support woodburn"
 458         select CPU_ARM1136
 459
 460 config TARGET_WOODBURN_SD
 461         bool "Support woodburn_sd"
 462         select CPU_ARM1136
 463         select SUPPORT_SPL
 464
 465 config TARGET_FLEA3
 466         bool "Support flea3"
 467         select CPU_ARM1136
 468
 469 config TARGET_MX35PDK
 470         bool "Support mx35pdk"
 471         select BOARD_LATE_INIT
 472         select CPU_ARM1136
 473
 474 config ARCH_BCM283X
 475         bool "Broadcom BCM283X family"
 476         select DM
 477         select DM_SERIAL
 478         select DM_GPIO
 479         select OF_CONTROL
 480
 481 config TARGET_VEXPRESS_CA15_TC2
 482         bool "Support vexpress_ca15_tc2"
 483         select CPU_V7
 484         select CPU_V7_HAS_NONSEC
 485         select CPU_V7_HAS_VIRT
 486
 487 config TARGET_VEXPRESS_CA5X2
 488         bool "Support vexpress_ca5x2"
 489         select CPU_V7
 490
 491 config TARGET_VEXPRESS_CA9X4
 492         bool "Support vexpress_ca9x4"
 493         select CPU_V7
 494
 495 config TARGET_BCM23550_W1D
 496         bool "Support bcm23550_w1d"
 497         select CPU_V7
 498
 499 config TARGET_BCM28155_AP
 500         bool "Support bcm28155_ap"
 501         select CPU_V7
 502
 503 config TARGET_BCMCYGNUS
 504         bool "Support bcmcygnus"
 505         select CPU_V7
 506         imply CMD_HASH
 507
 508 config TARGET_BCMNSP
 509         bool "Support bcmnsp"
 510         select CPU_V7
 511
 512 config TARGET_BCMNS2
 513         bool "Support Broadcom Northstar2"
 514         select ARM64
 515         help
 516           Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
 517           ARMv8 Cortex-A57 processors targeting a broad range of networking
 518           applications
 519
 520 config ARCH_EXYNOS
 521         bool "Samsung EXYNOS"
 522         select DM
 523         select DM_I2C
 524         select DM_SPI_FLASH
 525         select DM_SERIAL
 526         select DM_SPI
 527         select DM_GPIO
 528         select DM_KEYBOARD
 529
 530 config ARCH_S5PC1XX
 531         bool "Samsung S5PC1XX"
 532         select CPU_V7
 533         select DM
 534         select DM_SERIAL
 535         select DM_GPIO
 536         select DM_I2C
 537
 538 config ARCH_HIGHBANK
 539         bool "Calxeda Highbank"
 540         select CPU_V7
 541
 542 config ARCH_INTEGRATOR
 543         bool "ARM Ltd. Integrator family"
 544         select DM
 545         select DM_SERIAL
 546
 547 config ARCH_KEYSTONE
 548         bool "TI Keystone"
 549         select CPU_V7
 550         select SUPPORT_SPL
 551         select SYS_THUMB_BUILD
 552         select CMD_POWEROFF
 553         imply FIT
 554
 555 config ARCH_OMAP2PLUS
 556         bool "TI OMAP2+"
 557         select CPU_V7
 558         select SPL_BOARD_INIT if SPL
 559         select SUPPORT_SPL
 560         imply FIT
 561
 562 config ARCH_MESON
 563         bool "Amlogic Meson"
 564         help
 565           Support for the Meson SoC family developed by Amlogic Inc.,
 566           targeted at media players and tablet computers. We currently
 567           support the S905 (GXBaby) 64-bit SoC.
 568
 569 config ARCH_MX7ULP
 570         bool "NXP MX7ULP"
 571         select CPU_V7
 572         select ROM_UNIFIED_SECTIONS
 573
 574 config ARCH_MX7
 575         bool "Freescale MX7"
 576         select CPU_V7
 577         select SYS_FSL_HAS_SEC if SECURE_BOOT
 578         select SYS_FSL_SEC_COMPAT_4
 579         select SYS_FSL_SEC_LE
 580         select BOARD_EARLY_INIT_F
 581         select ARCH_MISC_INIT
 582
 583 config ARCH_MX6
 584         bool "Freescale MX6"
 585         select CPU_V7
 586         select SYS_FSL_HAS_SEC if SECURE_BOOT
 587         select SYS_FSL_SEC_COMPAT_4
 588         select SYS_FSL_SEC_LE
 589         select SYS_THUMB_BUILD if SPL
 590
 591 config ARCH_MX5
 592         bool "Freescale MX5"
 593         select CPU_V7
 594         select BOARD_EARLY_INIT_F
 595
 596 config ARCH_RMOBILE
 597         bool "Renesas ARM SoCs"
 598         select DM
 599         select DM_SERIAL
 600         select BOARD_EARLY_INIT_F
 601         imply SYS_THUMB_BUILD
 602
 603 config TARGET_S32V234EVB
 604         bool "Support s32v234evb"
 605         select ARM64
 606         select SYS_FSL_ERRATUM_ESDHC111
 607
 608 config ARCH_SNAPDRAGON
 609         bool "Qualcomm Snapdragon SoCs"
 610         select ARM64
 611         select DM
 612         select DM_GPIO
 613         select DM_SERIAL
 614         select SPMI
 615         select OF_CONTROL
 616         select OF_SEPARATE
 617
 618 config ARCH_SOCFPGA
 619         bool "Altera SOCFPGA family"
 620         select CPU_V7
 621         select SUPPORT_SPL
 622         select OF_CONTROL
 623         select SPL_OF_CONTROL
 624         select DM
 625         select DM_SPI_FLASH
 626         select DM_SPI
 627         select ENABLE_ARM_SOC_BOOT0_HOOK
 628         select ARCH_EARLY_INIT_R
 629         select ARCH_MISC_INIT
 630         select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 631         select SYS_THUMB_BUILD
 632
 633 config ARCH_SUNXI
 634         bool "Support sunxi (Allwinner) SoCs"
 635         select CMD_GPIO
 636         select CMD_MMC if MMC
 637         select CMD_USB if DISTRO_DEFAULTS
 638         select DM
 639         select DM_ETH
 640         select DM_GPIO
 641         select DM_KEYBOARD
 642         select DM_SERIAL
 643         select DM_USB if DISTRO_DEFAULTS
 644         select OF_BOARD_SETUP
 645         select OF_CONTROL
 646         select OF_SEPARATE
 647         select SPL_STACK_R if SUPPORT_SPL
 648         select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
 649         select SYS_NS16550
 650         select SPL_SYS_THUMB_BUILD if !ARM64
 651         select USB if DISTRO_DEFAULTS
 652         select USB_STORAGE if DISTRO_DEFAULTS
 653         select USB_KEYBOARD if DISTRO_DEFAULTS
 654         select USE_TINY_PRINTF
 655         imply PRE_CONSOLE_BUFFER
 656         imply SPL_GPIO_SUPPORT
 657         imply SPL_LIBCOMMON_SUPPORT
 658         imply SPL_LIBDISK_SUPPORT
 659         imply SPL_LIBGENERIC_SUPPORT
 660         imply SPL_MMC_SUPPORT if MMC
 661         imply SPL_POWER_SUPPORT
 662         imply SPL_SERIAL_SUPPORT
 663
 664 config TARGET_TS4600
 665         bool "Support TS4600"
 666         select CPU_ARM926EJS
 667         select SUPPORT_SPL
 668
 669 config ARCH_VF610
 670         bool "Freescale Vybrid"
 671         select CPU_V7
 672         select SYS_FSL_ERRATUM_ESDHC111
 673
 674 config ARCH_ZYNQ
 675         bool "Xilinx Zynq Platform"
 676         select BOARD_LATE_INIT
 677         select CPU_V7
 678         select SUPPORT_SPL
 679         select OF_CONTROL
 680         select SPL_BOARD_INIT if SPL
 681         select SPL_OF_CONTROL if SPL
 682         select DM
 683         select DM_ETH
 684         select DM_GPIO
 685         select SPL_DM if SPL
 686         select DM_MMC
 687         select DM_MMC_OPS
 688         select DM_SPI
 689         select DM_SERIAL
 690         select DM_SPI_FLASH
 691         select SPL_SEPARATE_BSS if SPL
 692         select DM_USB if USB
 693         select BLK
 694         select CLK
 695         select SPL_CLK
 696         select CLK_ZYNQ
 697         imply CMD_CLK
 698
 699 config ARCH_ZYNQMP
 700         bool "Support Xilinx ZynqMP Platform"
 701         select ARM64
 702         select BOARD_LATE_INIT
 703         select DM
 704         select OF_CONTROL
 705         select DM_SERIAL
 706         select SUPPORT_SPL
 707         select CLK
 708         select SPL_BOARD_INIT if SPL
 709         select SPL_CLK
 710         select DM_USB if USB
 711
 712 config TEGRA
 713         bool "NVIDIA Tegra"
 714
 715 config TARGET_VEXPRESS64_AEMV8A
 716         bool "Support vexpress_aemv8a"
 717         select ARM64
 718
 719 config TARGET_VEXPRESS64_BASE_FVP
 720         bool "Support Versatile Express ARMv8a FVP BASE model"
 721         select ARM64
 722         select SEMIHOSTING
 723
 724 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 725         bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 726         select ARM64
 727         help
 728           This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 729           the default config to allow the user to load the images directly into
 730           DRAM using model parameters rather than by using semi-hosting to load
 731           the files from the host filesystem.
 732
 733 config TARGET_VEXPRESS64_JUNO
 734         bool "Support Versatile Express Juno Development Platform"
 735         select ARM64
 736
 737 config TARGET_LS2080A_EMU
 738         bool "Support ls2080a_emu"
 739         select ARCH_LS2080A
 740         select ARM64
 741         select ARMV8_MULTIENTRY
 742         select ARCH_MISC_INIT
 743         help
 744           Support for Freescale LS2080A_EMU platform
 745           The LS2080A Development System (EMULATOR) is a pre silicon
 746           development platform that supports the QorIQ LS2080A
 747           Layerscape Architecture processor.
 748
 749 config TARGET_LS2080A_SIMU
 750         bool "Support ls2080a_simu"
 751         select ARCH_LS2080A
 752         select ARM64
 753         select ARMV8_MULTIENTRY
 754         select ARCH_MISC_INIT
 755         help
 756           Support for Freescale LS2080A_SIMU platform
 757           The LS2080A Development System (QDS) is a pre silicon
 758           development platform that supports the QorIQ LS2080A
 759           Layerscape Architecture processor.
 760
 761 config TARGET_LS2080AQDS
 762         bool "Support ls2080aqds"
 763         select ARCH_LS2080A
 764         select ARM64
 765         select ARMV8_MULTIENTRY
 766         select BOARD_LATE_INIT
 767         select SUPPORT_SPL
 768         select ARCH_MISC_INIT
 769         help
 770           Support for Freescale LS2080AQDS platform
 771           The LS2080A Development System (QDS) is a high-performance
 772           development platform that supports the QorIQ LS2080A
 773           Layerscape Architecture processor.
 774
 775 config TARGET_LS2080ARDB
 776         bool "Support ls2080ardb"
 777         select ARCH_LS2080A
 778         select ARM64
 779         select ARMV8_MULTIENTRY
 780         select BOARD_LATE_INIT
 781         select SUPPORT_SPL
 782         select ARCH_MISC_INIT
 783         help
 784           Support for Freescale LS2080ARDB platform.
 785           The LS2080A Reference design board (RDB) is a high-performance
 786           development platform that supports the QorIQ LS2080A
 787           Layerscape Architecture processor.
 788
 789 config TARGET_LS2081ARDB
 790         bool "Support ls2081ardb"
 791         select ARCH_LS2080A
 792         select ARM64
 793         select ARMV8_MULTIENTRY
 794         select BOARD_LATE_INIT
 795         select SUPPORT_SPL
 796         select ARCH_MISC_INIT
 797         help
 798           Support for Freescale LS2081ARDB platform.
 799           The LS2081A Reference design board (RDB) is a high-performance
 800           development platform that supports the QorIQ LS2081A/LS2041A
 801           Layerscape Architecture processor.
 802
 803 config TARGET_HIKEY
 804         bool "Support HiKey 96boards Consumer Edition Platform"
 805         select ARM64
 806         select DM
 807         select DM_GPIO
 808         select DM_SERIAL
 809         select OF_CONTROL
 810           help
 811           Support for HiKey 96boards platform. It features a HI6220
 812           SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 813
 814 config TARGET_LS1012AQDS
 815         bool "Support ls1012aqds"
 816         select ARCH_LS1012A
 817         select ARM64
 818         select BOARD_LATE_INIT
 819         help
 820           Support for Freescale LS1012AQDS platform.
 821           The LS1012A Development System (QDS) is a high-performance
 822           development platform that supports the QorIQ LS1012A
 823           Layerscape Architecture processor.
 824
 825 config TARGET_LS1012ARDB
 826         bool "Support ls1012ardb"
 827         select ARCH_LS1012A
 828         select ARM64
 829         select BOARD_LATE_INIT
 830         help
 831           Support for Freescale LS1012ARDB platform.
 832           The LS1012A Reference design board (RDB) is a high-performance
 833           development platform that supports the QorIQ LS1012A
 834           Layerscape Architecture processor.
 835
 836 config TARGET_LS1012AFRDM
 837         bool "Support ls1012afrdm"
 838         select ARCH_LS1012A
 839         select ARM64
 840         help
 841           Support for Freescale LS1012AFRDM platform.
 842           The LS1012A Freedom  board (FRDM) is a high-performance
 843           development platform that supports the QorIQ LS1012A
 844           Layerscape Architecture processor.
 845
 846 config TARGET_LS1021AQDS
 847         bool "Support ls1021aqds"
 848         select BOARD_LATE_INIT
 849         select CPU_V7
 850         select CPU_V7_HAS_NONSEC
 851         select CPU_V7_HAS_VIRT
 852         select SUPPORT_SPL
 853         select ARCH_LS1021A
 854         select ARCH_SUPPORT_PSCI
 855         select LS1_DEEP_SLEEP
 856         select SYS_FSL_DDR
 857         select BOARD_EARLY_INIT_F
 858
 859 config TARGET_LS1021ATWR
 860         bool "Support ls1021atwr"
 861         select BOARD_LATE_INIT
 862         select CPU_V7
 863         select CPU_V7_HAS_NONSEC
 864         select CPU_V7_HAS_VIRT
 865         select SUPPORT_SPL
 866         select ARCH_LS1021A
 867         select ARCH_SUPPORT_PSCI
 868         select LS1_DEEP_SLEEP
 869         select BOARD_EARLY_INIT_F
 870
 871 config TARGET_LS1021AIOT
 872         bool "Support ls1021aiot"
 873         select BOARD_LATE_INIT
 874         select CPU_V7
 875         select CPU_V7_HAS_NONSEC
 876         select CPU_V7_HAS_VIRT
 877         select SUPPORT_SPL
 878         select ARCH_LS1021A
 879         select ARCH_SUPPORT_PSCI
 880         help
 881           Support for Freescale LS1021AIOT platform.
 882           The LS1021A Freescale board (IOT) is a high-performance
 883           development platform that supports the QorIQ LS1021A
 884           Layerscape Architecture processor.
 885
 886 config TARGET_LS1043AQDS
 887         bool "Support ls1043aqds"
 888         select ARCH_LS1043A
 889         select ARM64
 890         select ARMV8_MULTIENTRY
 891         select BOARD_LATE_INIT
 892         select SUPPORT_SPL
 893         select BOARD_EARLY_INIT_F
 894         help
 895           Support for Freescale LS1043AQDS platform.
 896
 897 config TARGET_LS1043ARDB
 898         bool "Support ls1043ardb"
 899         select ARCH_LS1043A
 900         select ARM64
 901         select ARMV8_MULTIENTRY
 902         select BOARD_LATE_INIT
 903         select SUPPORT_SPL
 904         select BOARD_EARLY_INIT_F
 905         help
 906           Support for Freescale LS1043ARDB platform.
 907
 908 config TARGET_LS1046AQDS
 909         bool "Support ls1046aqds"
 910         select ARCH_LS1046A
 911         select ARM64
 912         select ARMV8_MULTIENTRY
 913         select BOARD_LATE_INIT
 914         select SUPPORT_SPL
 915         select DM_SPI_FLASH if DM_SPI
 916         select BOARD_EARLY_INIT_F
 917         help
 918           Support for Freescale LS1046AQDS platform.
 919           The LS1046A Development System (QDS) is a high-performance
 920           development platform that supports the QorIQ LS1046A
 921           Layerscape Architecture processor.
 922
 923 config TARGET_LS1046ARDB
 924         bool "Support ls1046ardb"
 925         select ARCH_LS1046A
 926         select ARM64
 927         select ARMV8_MULTIENTRY
 928         select BOARD_LATE_INIT
 929         select SUPPORT_SPL
 930         select DM_SPI_FLASH if DM_SPI
 931         select POWER_MC34VR500
 932         select BOARD_EARLY_INIT_F
 933         help
 934           Support for Freescale LS1046ARDB platform.
 935           The LS1046A Reference Design Board (RDB) is a high-performance
 936           development platform that supports the QorIQ LS1046A
 937           Layerscape Architecture processor.
 938
 939 config TARGET_H2200
 940         bool "Support h2200"
 941         select CPU_PXA
 942
 943 config TARGET_ZIPITZ2
 944         bool "Support zipitz2"
 945         select CPU_PXA
 946
 947 config TARGET_COLIBRI_PXA270
 948         bool "Support colibri_pxa270"
 949         select CPU_PXA
 950
 951 config ARCH_UNIPHIER
 952         bool "Socionext UniPhier SoCs"
 953         select BOARD_LATE_INIT
 954         select CLK_UNIPHIER
 955         select DM
 956         select DM_GPIO
 957         select DM_I2C
 958         select DM_MMC
 959         select DM_RESET
 960         select DM_SERIAL
 961         select DM_USB
 962         select OF_CONTROL
 963         select OF_LIBFDT
 964         select PINCTRL
 965         select SPL_BOARD_INIT if SPL
 966         select SPL_DM if SPL
 967         select SPL_LIBCOMMON_SUPPORT if SPL
 968         select SPL_LIBGENERIC_SUPPORT if SPL
 969         select SPL_OF_CONTROL if SPL
 970         select SPL_PINCTRL if SPL
 971         select SUPPORT_SPL
 972         help
 973           Support for UniPhier SoC family developed by Socionext Inc.
 974           (formerly, System LSI Business Division of Panasonic Corporation)
 975
 976 config STM32
 977         bool "Support STM32"
 978         select CPU_V7M
 979         select DM
 980         select DM_SERIAL
 981         select SYS_THUMB_BUILD
 982
 983 config ARCH_STI
 984         bool "Support STMicrolectronics SoCs"
 985         select CPU_V7
 986         select DM
 987         select DM_SERIAL
 988         select BLK
 989         select DM_MMC
 990         select DM_RESET
 991         help
 992           Support for STMicroelectronics STiH407/10 SoC family.
 993           This SoC is used on Linaro 96Board STiH410-B2260
 994
 995 config ARCH_ROCKCHIP
 996         bool "Support Rockchip SoCs"
 997         select OF_CONTROL
 998         select BLK
 999         select DM
1000         select SPL_DM if SPL
1001         select SYS_MALLOC_F
1002         select SYS_THUMB_BUILD if !ARM64
1003         select SPL_SYS_MALLOC_SIMPLE if SPL
1004         select DM_GPIO
1005         select DM_I2C
1006         select DM_MMC
1007         select DM_MMC_OPS
1008         select DM_SERIAL
1009         select DM_SPI
1010         select DM_SPI_FLASH
1011         select DM_USB if USB
1012         select DM_PWM
1013         select DM_REGULATOR
1014
1015 config TARGET_THUNDERX_88XX
1016         bool "Support ThunderX 88xx"
1017         select ARM64
1018         select OF_CONTROL
1019         select SYS_CACHE_SHIFT_7
1020
1021 config ARCH_ASPEED
1022         bool "Support Aspeed SoCs"
1023         select OF_CONTROL
1024         select DM
1025
1026 endchoice
1027
1028 source "arch/arm/mach-aspeed/Kconfig"
1029
1030 source "arch/arm/mach-at91/Kconfig"
1031
1032 source "arch/arm/mach-bcm283x/Kconfig"
1033
1034 source "arch/arm/mach-davinci/Kconfig"
1035
1036 source "arch/arm/mach-exynos/Kconfig"
1037
1038 source "arch/arm/mach-highbank/Kconfig"
1039
1040 source "arch/arm/mach-integrator/Kconfig"
1041
1042 source "arch/arm/mach-keystone/Kconfig"
1043
1044 source "arch/arm/mach-kirkwood/Kconfig"
1045
1046 source "arch/arm/mach-mvebu/Kconfig"
1047
1048 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1049
1050 source "arch/arm/cpu/armv7/mx7ulp/Kconfig"
1051
1052 source "arch/arm/cpu/armv7/mx7/Kconfig"
1053
1054 source "arch/arm/cpu/armv7/mx6/Kconfig"
1055
1056 source "arch/arm/cpu/armv7/mx5/Kconfig"
1057
1058 source "arch/arm/mach-omap2/Kconfig"
1059
1060 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1061
1062 source "arch/arm/mach-orion5x/Kconfig"
1063
1064 source "arch/arm/mach-rmobile/Kconfig"
1065
1066 source "arch/arm/mach-meson/Kconfig"
1067
1068 source "arch/arm/mach-rockchip/Kconfig"
1069
1070 source "arch/arm/mach-s5pc1xx/Kconfig"
1071
1072 source "arch/arm/mach-snapdragon/Kconfig"
1073
1074 source "arch/arm/mach-socfpga/Kconfig"
1075
1076 source "arch/arm/mach-sti/Kconfig"
1077
1078 source "arch/arm/mach-stm32/Kconfig"
1079
1080 source "arch/arm/mach-sunxi/Kconfig"
1081
1082 source "arch/arm/mach-tegra/Kconfig"
1083
1084 source "arch/arm/mach-uniphier/Kconfig"
1085
1086 source "arch/arm/cpu/armv7/vf610/Kconfig"
1087
1088 source "arch/arm/mach-zynq/Kconfig"
1089
1090 source "arch/arm/cpu/armv7/Kconfig"
1091
1092 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1093
1094 source "arch/arm/cpu/armv8/Kconfig"
1095
1096 source "arch/arm/imx-common/Kconfig"
1097
1098 source "board/aries/m28evk/Kconfig"
1099 source "board/bosch/shc/Kconfig"
1100 source "board/CarMediaLab/flea3/Kconfig"
1101 source "board/Marvell/aspenite/Kconfig"
1102 source "board/Marvell/gplugd/Kconfig"
1103 source "board/armadeus/apf27/Kconfig"
1104 source "board/armltd/vexpress/Kconfig"
1105 source "board/armltd/vexpress64/Kconfig"
1106 source "board/bluegiga/apx4devkit/Kconfig"
1107 source "board/broadcom/bcm23550_w1d/Kconfig"
1108 source "board/broadcom/bcm28155_ap/Kconfig"
1109 source "board/broadcom/bcmcygnus/Kconfig"
1110 source "board/broadcom/bcmnsp/Kconfig"
1111 source "board/broadcom/bcmns2/Kconfig"
1112 source "board/cavium/thunderx/Kconfig"
1113 source "board/cirrus/edb93xx/Kconfig"
1114 source "board/creative/xfi3/Kconfig"
1115 source "board/freescale/ls2080a/Kconfig"
1116 source "board/freescale/ls2080aqds/Kconfig"
1117 source "board/freescale/ls2080ardb/Kconfig"
1118 source "board/freescale/ls1021aqds/Kconfig"
1119 source "board/freescale/ls1043aqds/Kconfig"
1120 source "board/freescale/ls1021atwr/Kconfig"
1121 source "board/freescale/ls1021aiot/Kconfig"
1122 source "board/freescale/ls1046aqds/Kconfig"
1123 source "board/freescale/ls1043ardb/Kconfig"
1124 source "board/freescale/ls1046ardb/Kconfig"
1125 source "board/freescale/ls1012aqds/Kconfig"
1126 source "board/freescale/ls1012ardb/Kconfig"
1127 source "board/freescale/ls1012afrdm/Kconfig"
1128 source "board/freescale/mx23evk/Kconfig"
1129 source "board/freescale/mx25pdk/Kconfig"
1130 source "board/freescale/mx28evk/Kconfig"
1131 source "board/freescale/mx31ads/Kconfig"
1132 source "board/freescale/mx31pdk/Kconfig"
1133 source "board/freescale/mx35pdk/Kconfig"
1134 source "board/freescale/s32v234evb/Kconfig"
1135 source "board/gdsys/a38x/Kconfig"
1136 source "board/grinn/chiliboard/Kconfig"
1137 source "board/gumstix/pepper/Kconfig"
1138 source "board/h2200/Kconfig"
1139 source "board/hisilicon/hikey/Kconfig"
1140 source "board/imx31_phycore/Kconfig"
1141 source "board/isee/igep003x/Kconfig"
1142 source "board/olimex/mx23_olinuxino/Kconfig"
1143 source "board/phytec/pcm051/Kconfig"
1144 source "board/ppcag/bg0900/Kconfig"
1145 source "board/sandisk/sansa_fuze_plus/Kconfig"
1146 source "board/schulercontrol/sc_sps_1/Kconfig"
1147 source "board/silica/pengwyn/Kconfig"
1148 source "board/spear/spear300/Kconfig"
1149 source "board/spear/spear310/Kconfig"
1150 source "board/spear/spear320/Kconfig"
1151 source "board/spear/spear600/Kconfig"
1152 source "board/spear/x600/Kconfig"
1153 source "board/st/stv0991/Kconfig"
1154 source "board/syteco/zmx25/Kconfig"
1155 source "board/tcl/sl50/Kconfig"
1156 source "board/birdland/bav335x/Kconfig"
1157 source "board/timll/devkit3250/Kconfig"
1158 source "board/toradex/colibri_pxa270/Kconfig"
1159 source "board/technologic/ts4600/Kconfig"
1160 source "board/vscom/baltos/Kconfig"
1161 source "board/woodburn/Kconfig"
1162 source "board/work-microwave/work_92105/Kconfig"
1163 source "board/zipitz2/Kconfig"
1164
1165 source "arch/arm/Kconfig.debug"
1166
1167 endmenu