arch/arm/Kconfig

   1 menu "ARM architecture"
   2         depends on ARM
   3
   4 config SYS_ARCH
   5         default "arm"
   6
   7 config ARM64
   8         bool
   9         select PHYS_64BIT
  10         select SYS_CACHE_SHIFT_6
  11
  12 if ARM64
  13 config POSITION_INDEPENDENT
  14         bool "Generate position-independent pre-relocation code"
  15         help
  16           U-Boot expects to be linked to a specific hard-coded address, and to
  17           be loaded to and run from that address. This option lifts that
  18           restriction, thus allowing the code to be loaded to and executed
  19           from almost any address. This logic relies on the relocation
  20           information that is embedded into the binary to support U-Boot
  21           relocating itself to the top-of-RAM later during execution.
  22
  23 config SYS_INIT_SP_BSS_OFFSET
  24         int
  25         help
  26           U-Boot typically uses a hard-coded value for the stack pointer
  27           before relocation. Define this option to instead calculate the
  28           initial SP at run-time. This is useful to avoid hard-coding addresses
  29           into U-Boot, so that can be loaded and executed at arbitrary
  30           addresses and thus avoid using arbitrary addresses at runtime. This
  31           option's value is the offset added to &_bss_start in order to
  32           calculate the stack pointer. This offset should be large enough so
  33           that the early malloc region, global data (gd), and early stack usage
  34           do not overlap any appended DTB.
  35
  36 config LINUX_KERNEL_IMAGE_HEADER
  37         bool
  38         help
  39           Place a Linux kernel image header at the start of the U-Boot binary.
  40           The format of the header is described in the Linux kernel source at
  41           Documentation/arm64/booting.txt. This feature is useful since the
  42           image header reports the amount of memory (BSS and similar) that
  43           U-Boot needs to use, but which isn't part of the binary.
  44
  45 if LINUX_KERNEL_IMAGE_HEADER
  46 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
  47         hex
  48         help
  49           The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
  50           TEXT_OFFSET value written in to the Linux kernel image header.
  51 endif
  52 endif
  53
  54 config STATIC_RELA
  55         bool
  56         default y if ARM64 && !POSITION_INDEPENDENT
  57
  58 config DMA_ADDR_T_64BIT
  59         bool
  60         default y if ARM64
  61
  62 config HAS_VBAR
  63         bool
  64
  65 config HAS_THUMB2
  66         bool
  67
  68 # Used for compatibility with asm files copied from the kernel
  69 config ARM_ASM_UNIFIED
  70         bool
  71         default y
  72
  73 # Used for compatibility with asm files copied from the kernel
  74 config THUMB2_KERNEL
  75         bool
  76
  77 # If set, the workarounds for these ARM errata are applied early during U-Boot
  78 # startup. Note that in general these options force the workarounds to be
  79 # applied; no CPU-type/version detection exists, unlike the similar options in
  80 # the Linux kernel. Do not set these options unless they apply!  Also note that
  81 # the following can be machine specific errata. These do have ability to
  82 # provide rudimentary version and machine specific checks, but expect no
  83 # product checks:
  84 # CONFIG_ARM_ERRATA_430973
  85 # CONFIG_ARM_ERRATA_454179
  86 # CONFIG_ARM_ERRATA_621766
  87 # CONFIG_ARM_ERRATA_798870
  88 # CONFIG_ARM_ERRATA_801819
  89 config ARM_ERRATA_430973
  90         bool
  91
  92 config ARM_ERRATA_454179
  93         bool
  94
  95 config ARM_ERRATA_621766
  96         bool
  97
  98 config ARM_ERRATA_716044
  99         bool
 100
 101 config ARM_ERRATA_725233
 102         bool
 103
 104 config ARM_ERRATA_742230
 105         bool
 106
 107 config ARM_ERRATA_743622
 108         bool
 109
 110 config ARM_ERRATA_751472
 111         bool
 112
 113 config ARM_ERRATA_761320
 114         bool
 115
 116 config ARM_ERRATA_773022
 117         bool
 118
 119 config ARM_ERRATA_774769
 120         bool
 121
 122 config ARM_ERRATA_794072
 123         bool
 124
 125 config ARM_ERRATA_798870
 126         bool
 127
 128 config ARM_ERRATA_801819
 129         bool
 130
 131 config ARM_ERRATA_826974
 132         bool
 133
 134 config ARM_ERRATA_828024
 135         bool
 136
 137 config ARM_ERRATA_829520
 138         bool
 139
 140 config ARM_ERRATA_833069
 141         bool
 142
 143 config ARM_ERRATA_833471
 144         bool
 145
 146 config ARM_ERRATA_845369
 147        bool
 148
 149 config ARM_ERRATA_852421
 150         bool
 151
 152 config ARM_ERRATA_852423
 153         bool
 154
 155 config ARM_ERRATA_855873
 156         bool
 157
 158 config CPU_ARM720T
 159         bool
 160         select SYS_CACHE_SHIFT_5
 161
 162 config CPU_ARM920T
 163         bool
 164         select SYS_CACHE_SHIFT_5
 165
 166 config CPU_ARM926EJS
 167         bool
 168         select SYS_CACHE_SHIFT_5
 169
 170 config CPU_ARM946ES
 171         bool
 172         select SYS_CACHE_SHIFT_5
 173
 174 config CPU_ARM1136
 175         bool
 176         select SYS_CACHE_SHIFT_5
 177
 178 config CPU_ARM1176
 179         bool
 180         select HAS_VBAR
 181         select SYS_CACHE_SHIFT_5
 182
 183 config CPU_V7
 184         bool
 185         select HAS_VBAR
 186         select HAS_THUMB2
 187         select SYS_CACHE_SHIFT_6
 188
 189 config CPU_V7M
 190         bool
 191         select HAS_THUMB2
 192         select THUMB2_KERNEL
 193         select SYS_CACHE_SHIFT_5
 194
 195 config CPU_PXA
 196         bool
 197         select SYS_CACHE_SHIFT_5
 198
 199 config CPU_SA1100
 200         bool
 201         select SYS_CACHE_SHIFT_5
 202
 203 config SYS_CPU
 204         default "arm720t" if CPU_ARM720T
 205         default "arm920t" if CPU_ARM920T
 206         default "arm926ejs" if CPU_ARM926EJS
 207         default "arm946es" if CPU_ARM946ES
 208         default "arm1136" if CPU_ARM1136
 209         default "arm1176" if CPU_ARM1176
 210         default "armv7" if CPU_V7
 211         default "armv7m" if CPU_V7M
 212         default "pxa" if CPU_PXA
 213         default "sa1100" if CPU_SA1100
 214         default "armv8" if ARM64
 215
 216 config SYS_ARM_ARCH
 217         int
 218         default 4 if CPU_ARM720T
 219         default 4 if CPU_ARM920T
 220         default 5 if CPU_ARM926EJS
 221         default 5 if CPU_ARM946ES
 222         default 6 if CPU_ARM1136
 223         default 6 if CPU_ARM1176
 224         default 7 if CPU_V7
 225         default 7 if CPU_V7M
 226         default 5 if CPU_PXA
 227         default 4 if CPU_SA1100
 228         default 8 if ARM64
 229
 230 config SYS_CACHE_SHIFT_5
 231         bool
 232
 233 config SYS_CACHE_SHIFT_6
 234         bool
 235
 236 config SYS_CACHE_SHIFT_7
 237         bool
 238
 239 config SYS_CACHELINE_SIZE
 240         int
 241         default 128 if SYS_CACHE_SHIFT_7
 242         default 64 if SYS_CACHE_SHIFT_6
 243         default 32 if SYS_CACHE_SHIFT_5
 244
 245 config ARM_SMCCC
 246         bool "Support for ARM SMC Calling Convention (SMCCC)"
 247         depends on CPU_V7 || ARM64
 248         select ARM_PSCI_FW
 249         help
 250           Say Y here if you want to enable ARM SMC Calling Convention.
 251           This should be enabled if U-Boot needs to communicate with system
 252           firmware (for example, PSCI) according to SMCCC.
 253
 254 config SEMIHOSTING
 255         bool "support boot from semihosting"
 256         help
 257           In emulated environments, semihosting is a way for
 258           the hosted environment to call out to the emulator to
 259           retrieve files from the host machine.
 260
 261 config SYS_THUMB_BUILD
 262         bool "Build U-Boot using the Thumb instruction set"
 263         depends on !ARM64
 264         help
 265            Use this flag to build U-Boot using the Thumb instruction set for
 266            ARM architectures. Thumb instruction set provides better code
 267            density. For ARM architectures that support Thumb2 this flag will
 268            result in Thumb2 code generated by GCC.
 269
 270 config SPL_SYS_THUMB_BUILD
 271         bool "Build SPL using the Thumb instruction set"
 272         default y if SYS_THUMB_BUILD
 273         depends on !ARM64
 274         help
 275            Use this flag to build SPL using the Thumb instruction set for
 276            ARM architectures. Thumb instruction set provides better code
 277            density. For ARM architectures that support Thumb2 this flag will
 278            result in Thumb2 code generated by GCC.
 279
 280 config SYS_L2CACHE_OFF
 281         bool "L2cache off"
 282         help
 283           If SoC does not support L2CACHE or one do not want to enable
 284           L2CACHE, choose this option.
 285
 286 config ENABLE_ARM_SOC_BOOT0_HOOK
 287         bool "prepare BOOT0 header"
 288         help
 289           If the SoC's BOOT0 requires a header area filled with (magic)
 290           values, then choose this option, and create a define called
 291           ARM_SOC_BOOT0_HOOK which contains the required assembler
 292           preprocessor code.
 293
 294 config ARM_CORTEX_CPU_IS_UP
 295         bool
 296         default n
 297
 298 config USE_ARCH_MEMCPY
 299         bool "Use an assembly optimized implementation of memcpy"
 300         default y
 301         depends on !ARM64
 302         help
 303           Enable the generation of an optimized version of memcpy.
 304           Such implementation may be faster under some conditions
 305           but may increase the binary size.
 306
 307 config SPL_USE_ARCH_MEMCPY
 308         bool "Use an assembly optimized implementation of memcpy for SPL"
 309         default y if USE_ARCH_MEMCPY
 310         depends on !ARM64
 311         help
 312           Enable the generation of an optimized version of memcpy.
 313           Such implementation may be faster under some conditions
 314           but may increase the binary size.
 315
 316 config USE_ARCH_MEMSET
 317         bool "Use an assembly optimized implementation of memset"
 318         default y
 319         depends on !ARM64
 320         help
 321           Enable the generation of an optimized version of memset.
 322           Such implementation may be faster under some conditions
 323           but may increase the binary size.
 324
 325 config SPL_USE_ARCH_MEMSET
 326         bool "Use an assembly optimized implementation of memset for SPL"
 327         default y if USE_ARCH_MEMSET
 328         depends on !ARM64
 329         help
 330           Enable the generation of an optimized version of memset.
 331           Such implementation may be faster under some conditions
 332           but may increase the binary size.
 333
 334 config ARM64_SUPPORT_AARCH32
 335         bool "ARM64 system support AArch32 execution state"
 336         default y if ARM64 && !TARGET_THUNDERX_88XX
 337         help
 338           This ARM64 system supports AArch32 execution state.
 339
 340 choice
 341         prompt "Target select"
 342         default TARGET_HIKEY
 343
 344 config ARCH_AT91
 345         bool "Atmel AT91"
 346         select SPL_BOARD_INIT if SPL
 347
 348 config TARGET_EDB93XX
 349         bool "Support edb93xx"
 350         select CPU_ARM920T
 351         select PL010_SERIAL
 352
 353 config TARGET_ASPENITE
 354         bool "Support aspenite"
 355         select CPU_ARM926EJS
 356
 357 config TARGET_GPLUGD
 358         bool "Support gplugd"
 359         select CPU_ARM926EJS
 360
 361 config ARCH_DAVINCI
 362         bool "TI DaVinci"
 363         select CPU_ARM926EJS
 364         imply CMD_SAVES
 365         help
 366           Support for TI's DaVinci platform.
 367
 368 config KIRKWOOD
 369         bool "Marvell Kirkwood"
 370         select CPU_ARM926EJS
 371         select BOARD_EARLY_INIT_F
 372         select ARCH_MISC_INIT
 373
 374 config ARCH_MVEBU
 375         bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 376         select OF_CONTROL
 377         select OF_SEPARATE
 378         select DM
 379         select DM_ETH
 380         select DM_SERIAL
 381         select DM_SPI
 382         select DM_SPI_FLASH
 383
 384 config TARGET_DEVKIT3250
 385         bool "Support devkit3250"
 386         select CPU_ARM926EJS
 387         select SUPPORT_SPL
 388
 389 config TARGET_WORK_92105
 390         bool "Support work_92105"
 391         select CPU_ARM926EJS
 392         select SUPPORT_SPL
 393
 394 config TARGET_APF27
 395         bool "Support apf27"
 396         select CPU_ARM926EJS
 397         select SUPPORT_SPL
 398
 399 config TARGET_APX4DEVKIT
 400         bool "Support apx4devkit"
 401         select CPU_ARM926EJS
 402         select SUPPORT_SPL
 403         select PL011_SERIAL
 404
 405 config TARGET_XFI3
 406         bool "Support xfi3"
 407         select CPU_ARM926EJS
 408         select SUPPORT_SPL
 409         select PL011_SERIAL
 410
 411 config TARGET_M28EVK
 412         bool "Support m28evk"
 413         select CPU_ARM926EJS
 414         select SUPPORT_SPL
 415         select PL011_SERIAL
 416
 417 config TARGET_MX23EVK
 418         bool "Support mx23evk"
 419         select CPU_ARM926EJS
 420         select SUPPORT_SPL
 421         select BOARD_EARLY_INIT_F
 422         select PL011_SERIAL
 423
 424 config TARGET_MX28EVK
 425         bool "Support mx28evk"
 426         select CPU_ARM926EJS
 427         select SUPPORT_SPL
 428         select BOARD_EARLY_INIT_F
 429         select PL011_SERIAL
 430
 431 config TARGET_MX23_OLINUXINO
 432         bool "Support mx23_olinuxino"
 433         select CPU_ARM926EJS
 434         select SUPPORT_SPL
 435         select BOARD_EARLY_INIT_F
 436         select PL011_SERIAL
 437
 438 config TARGET_BG0900
 439         bool "Support bg0900"
 440         select CPU_ARM926EJS
 441         select SUPPORT_SPL
 442         select PL011_SERIAL
 443
 444 config TARGET_SANSA_FUZE_PLUS
 445         bool "Support sansa_fuze_plus"
 446         select CPU_ARM926EJS
 447         select SUPPORT_SPL
 448         select PL011_SERIAL
 449
 450 config TARGET_SC_SPS_1
 451         bool "Support sc_sps_1"
 452         select CPU_ARM926EJS
 453         select SUPPORT_SPL
 454         select PL011_SERIAL
 455
 456 config ORION5X
 457         bool "Marvell Orion"
 458         select CPU_ARM926EJS
 459
 460 config TARGET_SPEAR300
 461         bool "Support spear300"
 462         select CPU_ARM926EJS
 463         select BOARD_EARLY_INIT_F
 464         imply CMD_SAVES
 465         select PL011_SERIAL
 466
 467 config TARGET_SPEAR310
 468         bool "Support spear310"
 469         select CPU_ARM926EJS
 470         select BOARD_EARLY_INIT_F
 471         imply CMD_SAVES
 472         select PL011_SERIAL
 473
 474 config TARGET_SPEAR320
 475         bool "Support spear320"
 476         select CPU_ARM926EJS
 477         select BOARD_EARLY_INIT_F
 478         imply CMD_SAVES
 479         select PL011_SERIAL
 480
 481 config TARGET_SPEAR600
 482         bool "Support spear600"
 483         select CPU_ARM926EJS
 484         select BOARD_EARLY_INIT_F
 485         imply CMD_SAVES
 486         select PL011_SERIAL
 487
 488 config TARGET_STV0991
 489         bool "Support stv0991"
 490         select CPU_V7
 491         select DM
 492         select DM_SERIAL
 493         select DM_SPI
 494         select DM_SPI_FLASH
 495         select SPI_FLASH
 496         select PL01X_SERIAL
 497
 498 config TARGET_X600
 499         bool "Support x600"
 500         select BOARD_LATE_INIT
 501         select CPU_ARM926EJS
 502         select SUPPORT_SPL
 503         select PL011_SERIAL
 504
 505 config TARGET_IMX31_PHYCORE
 506         bool "Support imx31_phycore_eet"
 507         select CPU_ARM1136
 508         select BOARD_EARLY_INIT_F
 509
 510 config TARGET_IMX31_PHYCORE_EET
 511         bool "Support imx31_phycore_eet"
 512         select BOARD_LATE_INIT
 513         select CPU_ARM1136
 514         select BOARD_EARLY_INIT_F
 515
 516 config TARGET_MX31ADS
 517         bool "Support mx31ads"
 518         select CPU_ARM1136
 519         select BOARD_EARLY_INIT_F
 520
 521 config TARGET_MX31PDK
 522         bool "Support mx31pdk"
 523         select BOARD_LATE_INIT
 524         select CPU_ARM1136
 525         select SUPPORT_SPL
 526         select BOARD_EARLY_INIT_F
 527
 528 config TARGET_WOODBURN
 529         bool "Support woodburn"
 530         select CPU_ARM1136
 531
 532 config TARGET_WOODBURN_SD
 533         bool "Support woodburn_sd"
 534         select CPU_ARM1136
 535         select SUPPORT_SPL
 536
 537 config TARGET_FLEA3
 538         bool "Support flea3"
 539         select CPU_ARM1136
 540
 541 config TARGET_MX35PDK
 542         bool "Support mx35pdk"
 543         select BOARD_LATE_INIT
 544         select CPU_ARM1136
 545
 546 config ARCH_BCM283X
 547         bool "Broadcom BCM283X family"
 548         select DM
 549         select DM_SERIAL
 550         select DM_GPIO
 551         select OF_CONTROL
 552         select PL01X_SERIAL
 553         select SERIAL_SEARCH_ALL
 554         imply FAT_WRITE
 555
 556 config TARGET_VEXPRESS_CA15_TC2
 557         bool "Support vexpress_ca15_tc2"
 558         select CPU_V7
 559         select CPU_V7_HAS_NONSEC
 560         select CPU_V7_HAS_VIRT
 561         select PL011_SERIAL
 562
 563 config TARGET_VEXPRESS_CA5X2
 564         bool "Support vexpress_ca5x2"
 565         select CPU_V7
 566         select PL011_SERIAL
 567
 568 config TARGET_VEXPRESS_CA9X4
 569         bool "Support vexpress_ca9x4"
 570         select CPU_V7
 571         select PL011_SERIAL
 572
 573 config TARGET_BCM23550_W1D
 574         bool "Support bcm23550_w1d"
 575         select CPU_V7
 576         imply CRC32_VERIFY
 577         imply FAT_WRITE
 578
 579 config TARGET_BCM28155_AP
 580         bool "Support bcm28155_ap"
 581         select CPU_V7
 582         imply CRC32_VERIFY
 583         imply FAT_WRITE
 584
 585 config TARGET_BCMCYGNUS
 586         bool "Support bcmcygnus"
 587         select CPU_V7
 588         imply CRC32_VERIFY
 589         imply CMD_HASH
 590         imply FAT_WRITE
 591         imply HASH_VERIFY
 592         imply NETDEVICES
 593         imply BCM_SF2_ETH
 594         imply BCM_SF2_ETH_GMAC
 595
 596 config TARGET_BCMNSP
 597         bool "Support bcmnsp"
 598         select CPU_V7
 599
 600 config TARGET_BCMNS2
 601         bool "Support Broadcom Northstar2"
 602         select ARM64
 603         help
 604           Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
 605           ARMv8 Cortex-A57 processors targeting a broad range of networking
 606           applications
 607
 608 config ARCH_EXYNOS
 609         bool "Samsung EXYNOS"
 610         select DM
 611         select DM_I2C
 612         select DM_SPI_FLASH
 613         select DM_SERIAL
 614         select DM_SPI
 615         select DM_GPIO
 616         select DM_KEYBOARD
 617         imply FAT_WRITE
 618
 619 config ARCH_S5PC1XX
 620         bool "Samsung S5PC1XX"
 621         select CPU_V7
 622         select DM
 623         select DM_SERIAL
 624         select DM_GPIO
 625         select DM_I2C
 626
 627 config ARCH_HIGHBANK
 628         bool "Calxeda Highbank"
 629         select CPU_V7
 630         select PL011_SERIAL
 631
 632 config ARCH_INTEGRATOR
 633         bool "ARM Ltd. Integrator family"
 634         select DM
 635         select DM_SERIAL
 636         select PL01X_SERIAL
 637
 638 config ARCH_KEYSTONE
 639         bool "TI Keystone"
 640         select CPU_V7
 641         select SUPPORT_SPL
 642         select SYS_THUMB_BUILD
 643         select CMD_POWEROFF
 644         imply CMD_MTDPARTS
 645         imply FIT
 646         imply CMD_SAVES
 647
 648 config ARCH_OMAP2PLUS
 649         bool "TI OMAP2+"
 650         select CPU_V7
 651         select SPL_BOARD_INIT if SPL
 652         select SPL_STACK_R if SPL
 653         select SUPPORT_SPL
 654         imply FIT
 655
 656 config ARCH_MESON
 657         bool "Amlogic Meson"
 658         help
 659           Support for the Meson SoC family developed by Amlogic Inc.,
 660           targeted at media players and tablet computers. We currently
 661           support the S905 (GXBaby) 64-bit SoC.
 662
 663 config ARCH_MX25
 664         bool "NXP MX25"
 665         select CPU_ARM926EJS
 666
 667 config ARCH_MX7ULP
 668         bool "NXP MX7ULP"
 669         select CPU_V7
 670         select ROM_UNIFIED_SECTIONS
 671
 672 config ARCH_MX7
 673         bool "Freescale MX7"
 674         select CPU_V7
 675         select SYS_FSL_HAS_SEC if SECURE_BOOT
 676         select SYS_FSL_SEC_COMPAT_4
 677         select SYS_FSL_SEC_LE
 678         select BOARD_EARLY_INIT_F
 679         select ARCH_MISC_INIT
 680
 681 config ARCH_MX6
 682         bool "Freescale MX6"
 683         select CPU_V7
 684         select SYS_FSL_HAS_SEC if SECURE_BOOT
 685         select SYS_FSL_SEC_COMPAT_4
 686         select SYS_FSL_SEC_LE
 687         select SYS_THUMB_BUILD if SPL
 688
 689 if ARCH_MX6
 690 config SPL_LDSCRIPT
 691         default "arch/arm/mach-omap2/u-boot-spl.lds"
 692 endif
 693
 694 config ARCH_MX5
 695         bool "Freescale MX5"
 696         select CPU_V7
 697         select BOARD_EARLY_INIT_F
 698
 699 config ARCH_QEMU
 700         bool "QEMU Virtual Platform"
 701         select DM
 702         select DM_SERIAL
 703         select OF_CONTROL
 704         select PL01X_SERIAL
 705
 706 config ARCH_RMOBILE
 707         bool "Renesas ARM SoCs"
 708         select DM
 709         select DM_SERIAL
 710         select BOARD_EARLY_INIT_F
 711         imply FAT_WRITE
 712         imply SYS_THUMB_BUILD
 713
 714 config TARGET_S32V234EVB
 715         bool "Support s32v234evb"
 716         select ARM64
 717         select SYS_FSL_ERRATUM_ESDHC111
 718
 719 config ARCH_SNAPDRAGON
 720         bool "Qualcomm Snapdragon SoCs"
 721         select ARM64
 722         select DM
 723         select DM_GPIO
 724         select DM_SERIAL
 725         select SPMI
 726         select OF_CONTROL
 727         select OF_SEPARATE
 728
 729 config ARCH_SOCFPGA
 730         bool "Altera SOCFPGA family"
 731         select CPU_V7
 732         select SUPPORT_SPL
 733         select OF_CONTROL
 734         select SPL_OF_CONTROL
 735         select DM
 736         select DM_SPI_FLASH
 737         select DM_SPI
 738         select ENABLE_ARM_SOC_BOOT0_HOOK
 739         select ARCH_EARLY_INIT_R
 740         select ARCH_MISC_INIT
 741         select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 742         select SYS_THUMB_BUILD
 743         imply CMD_MTDPARTS
 744         imply CRC32_VERIFY
 745         imply FAT_WRITE
 746
 747 config ARCH_SUNXI
 748         bool "Support sunxi (Allwinner) SoCs"
 749         select BINMAN
 750         select CMD_GPIO
 751         select CMD_MMC if MMC
 752         select CMD_USB if DISTRO_DEFAULTS
 753         select DM
 754         select DM_ETH
 755         select DM_GPIO
 756         select DM_KEYBOARD
 757         select DM_SERIAL
 758         select DM_USB if DISTRO_DEFAULTS
 759         select OF_BOARD_SETUP
 760         select OF_CONTROL
 761         select OF_SEPARATE
 762         select SPL_STACK_R if SPL
 763         select SPL_SYS_MALLOC_SIMPLE if SPL
 764         select SYS_NS16550
 765         select SPL_SYS_THUMB_BUILD if !ARM64
 766         select SYS_THUMB_BUILD if !ARM64
 767         select USB if DISTRO_DEFAULTS
 768         select USB_STORAGE if DISTRO_DEFAULTS
 769         select USB_KEYBOARD if DISTRO_DEFAULTS
 770         select USE_TINY_PRINTF
 771         imply CMD_GPT
 772         imply FAT_WRITE
 773         imply OF_LIBFDT_OVERLAY
 774         imply PRE_CONSOLE_BUFFER
 775         imply SPL_GPIO_SUPPORT
 776         imply SPL_LIBCOMMON_SUPPORT
 777         imply SPL_LIBDISK_SUPPORT
 778         imply SPL_LIBGENERIC_SUPPORT
 779         imply SPL_MMC_SUPPORT if MMC
 780         imply SPL_POWER_SUPPORT
 781         imply SPL_SERIAL_SUPPORT
 782         imply USB_GADGET
 783
 784 config TARGET_TS4600
 785         bool "Support TS4600"
 786         select CPU_ARM926EJS
 787         select SUPPORT_SPL
 788         select PL011_SERIAL
 789
 790 config ARCH_VF610
 791         bool "Freescale Vybrid"
 792         select CPU_V7
 793         select SYS_FSL_ERRATUM_ESDHC111
 794         imply CMD_MTDPARTS
 795         imply NAND
 796
 797 config ARCH_ZYNQ
 798         bool "Xilinx Zynq based platform"
 799         select BOARD_LATE_INIT
 800         select CPU_V7
 801         select SUPPORT_SPL
 802         select OF_CONTROL
 803         select SPL_BOARD_INIT if SPL
 804         select SPL_OF_CONTROL if SPL
 805         select DM
 806         select DM_ETH if NET
 807         select SPL_DM if SPL
 808         select DM_MMC if MMC
 809         select DM_SPI
 810         select DM_SERIAL
 811         select DM_SPI_FLASH
 812         select SPL_SEPARATE_BSS if SPL
 813         select DM_USB if USB
 814         select CLK
 815         select SPL_CLK if SPL
 816         select CLK_ZYNQ
 817         imply CMD_CLK
 818         imply FAT_WRITE
 819         imply CMD_SPL
 820
 821 config ARCH_ZYNQMP
 822         bool "Xilinx ZynqMP based platform"
 823         select ARM64
 824         select BOARD_LATE_INIT
 825         select DM
 826         select OF_CONTROL
 827         select DM_SERIAL
 828         select SUPPORT_SPL
 829         select CLK
 830         select SPL_BOARD_INIT if SPL
 831         select SPL_CLK if SPL
 832         select DM_USB if USB
 833         imply FAT_WRITE
 834
 835 config TEGRA
 836         bool "NVIDIA Tegra"
 837         imply FAT_WRITE
 838
 839 config TARGET_VEXPRESS64_AEMV8A
 840         bool "Support vexpress_aemv8a"
 841         select ARM64
 842         select PL01X_SERIAL
 843
 844 config TARGET_VEXPRESS64_BASE_FVP
 845         bool "Support Versatile Express ARMv8a FVP BASE model"
 846         select ARM64
 847         select SEMIHOSTING
 848         select PL01X_SERIAL
 849
 850 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 851         bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 852         select ARM64
 853         select PL01X_SERIAL
 854         help
 855           This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 856           the default config to allow the user to load the images directly into
 857           DRAM using model parameters rather than by using semi-hosting to load
 858           the files from the host filesystem.
 859
 860 config TARGET_VEXPRESS64_JUNO
 861         bool "Support Versatile Express Juno Development Platform"
 862         select ARM64
 863         select PL01X_SERIAL
 864
 865 config TARGET_LS2080A_EMU
 866         bool "Support ls2080a_emu"
 867         select ARCH_LS2080A
 868         select ARM64
 869         select ARMV8_MULTIENTRY
 870         select ARCH_MISC_INIT
 871         help
 872           Support for Freescale LS2080A_EMU platform
 873           The LS2080A Development System (EMULATOR) is a pre silicon
 874           development platform that supports the QorIQ LS2080A
 875           Layerscape Architecture processor.
 876
 877 config TARGET_LS2080A_SIMU
 878         bool "Support ls2080a_simu"
 879         select ARCH_LS2080A
 880         select ARM64
 881         select ARMV8_MULTIENTRY
 882         select ARCH_MISC_INIT
 883         help
 884           Support for Freescale LS2080A_SIMU platform
 885           The LS2080A Development System (QDS) is a pre silicon
 886           development platform that supports the QorIQ LS2080A
 887           Layerscape Architecture processor.
 888
 889 config TARGET_LS1088AQDS
 890         bool "Support ls1088aqds"
 891         select ARCH_LS1088A
 892         select ARM64
 893         select ARMV8_MULTIENTRY
 894         select ARCH_MISC_INIT
 895         select BOARD_LATE_INIT
 896         select SUPPORT_SPL
 897         help
 898           Support for NXP LS1088AQDS platform
 899           The LS1088A Development System (QDS) is a high-performance
 900           development platform that supports the QorIQ LS1088A
 901           Layerscape Architecture processor.
 902
 903 config TARGET_LS2080AQDS
 904         bool "Support ls2080aqds"
 905         select ARCH_LS2080A
 906         select ARM64
 907         select ARMV8_MULTIENTRY
 908         select BOARD_LATE_INIT
 909         select SUPPORT_SPL
 910         select ARCH_MISC_INIT
 911         imply SCSI
 912         imply SCSI_AHCI
 913         help
 914           Support for Freescale LS2080AQDS platform
 915           The LS2080A Development System (QDS) is a high-performance
 916           development platform that supports the QorIQ LS2080A
 917           Layerscape Architecture processor.
 918
 919 config TARGET_LS2080ARDB
 920         bool "Support ls2080ardb"
 921         select ARCH_LS2080A
 922         select ARM64
 923         select ARMV8_MULTIENTRY
 924         select BOARD_LATE_INIT
 925         select SUPPORT_SPL
 926         select ARCH_MISC_INIT
 927         imply SCSI
 928         imply SCSI_AHCI
 929         help
 930           Support for Freescale LS2080ARDB platform.
 931           The LS2080A Reference design board (RDB) is a high-performance
 932           development platform that supports the QorIQ LS2080A
 933           Layerscape Architecture processor.
 934
 935 config TARGET_LS2081ARDB
 936         bool "Support ls2081ardb"
 937         select ARCH_LS2080A
 938         select ARM64
 939         select ARMV8_MULTIENTRY
 940         select BOARD_LATE_INIT
 941         select SUPPORT_SPL
 942         select ARCH_MISC_INIT
 943         help
 944           Support for Freescale LS2081ARDB platform.
 945           The LS2081A Reference design board (RDB) is a high-performance
 946           development platform that supports the QorIQ LS2081A/LS2041A
 947           Layerscape Architecture processor.
 948
 949 config TARGET_HIKEY
 950         bool "Support HiKey 96boards Consumer Edition Platform"
 951         select ARM64
 952         select DM
 953         select DM_GPIO
 954         select DM_SERIAL
 955         select OF_CONTROL
 956         select PL01X_SERIAL
 957           help
 958           Support for HiKey 96boards platform. It features a HI6220
 959           SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 960
 961 config TARGET_POPLAR
 962         bool "Support Poplar 96boards Enterprise Edition Platform"
 963         select ARM64
 964         select DM
 965         select OF_CONTROL
 966         select DM_SERIAL
 967         select DM_USB
 968         select PL01X_SERIAL
 969           help
 970           Support for Poplar 96boards EE platform. It features a HI3798cv200
 971           SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
 972           making it capable of running any commercial set-top solution based on
 973           Linux or Android.
 974
 975 config TARGET_LS1012AQDS
 976         bool "Support ls1012aqds"
 977         select ARCH_LS1012A
 978         select ARM64
 979         select BOARD_LATE_INIT
 980         help
 981           Support for Freescale LS1012AQDS platform.
 982           The LS1012A Development System (QDS) is a high-performance
 983           development platform that supports the QorIQ LS1012A
 984           Layerscape Architecture processor.
 985
 986 config TARGET_LS1012ARDB
 987         bool "Support ls1012ardb"
 988         select ARCH_LS1012A
 989         select ARM64
 990         select BOARD_LATE_INIT
 991         imply SCSI
 992         imply SCSI_AHCI
 993         help
 994           Support for Freescale LS1012ARDB platform.
 995           The LS1012A Reference design board (RDB) is a high-performance
 996           development platform that supports the QorIQ LS1012A
 997           Layerscape Architecture processor.
 998
 999 config TARGET_LS1012A2G5RDB
1000         bool "Support ls1012a2g5rdb"
1001         select ARCH_LS1012A
1002         select ARM64
1003         select BOARD_LATE_INIT
1004         imply SCSI
1005         help
1006           Support for Freescale LS1012A2G5RDB platform.
1007           The LS1012A 2G5 Reference design board (RDB) is a high-performance
1008           development platform that supports the QorIQ LS1012A
1009           Layerscape Architecture processor.
1010
1011 config TARGET_LS1012AFRDM
1012         bool "Support ls1012afrdm"
1013         select ARCH_LS1012A
1014         select ARM64
1015         help
1016           Support for Freescale LS1012AFRDM platform.
1017           The LS1012A Freedom  board (FRDM) is a high-performance
1018           development platform that supports the QorIQ LS1012A
1019           Layerscape Architecture processor.
1020
1021 config TARGET_LS1088ARDB
1022         bool "Support ls1088ardb"
1023         select ARCH_LS1088A
1024         select ARM64
1025         select ARMV8_MULTIENTRY
1026         select ARCH_MISC_INIT
1027         select BOARD_LATE_INIT
1028         select SUPPORT_SPL
1029         help
1030           Support for NXP LS1088ARDB platform.
1031           The LS1088A Reference design board (RDB) is a high-performance
1032           development platform that supports the QorIQ LS1088A
1033           Layerscape Architecture processor.
1034
1035 config TARGET_LS1021AQDS
1036         bool "Support ls1021aqds"
1037         select BOARD_LATE_INIT
1038         select CPU_V7
1039         select CPU_V7_HAS_NONSEC
1040         select CPU_V7_HAS_VIRT
1041         select SUPPORT_SPL
1042         select ARCH_LS1021A
1043         select ARCH_SUPPORT_PSCI
1044         select LS1_DEEP_SLEEP
1045         select SYS_FSL_DDR
1046         select BOARD_EARLY_INIT_F
1047         imply SCSI
1048
1049 config TARGET_LS1021ATWR
1050         bool "Support ls1021atwr"
1051         select BOARD_LATE_INIT
1052         select CPU_V7
1053         select CPU_V7_HAS_NONSEC
1054         select CPU_V7_HAS_VIRT
1055         select SUPPORT_SPL
1056         select ARCH_LS1021A
1057         select ARCH_SUPPORT_PSCI
1058         select LS1_DEEP_SLEEP
1059         select BOARD_EARLY_INIT_F
1060         imply SCSI
1061
1062 config TARGET_LS1021AIOT
1063         bool "Support ls1021aiot"
1064         select BOARD_LATE_INIT
1065         select CPU_V7
1066         select CPU_V7_HAS_NONSEC
1067         select CPU_V7_HAS_VIRT
1068         select SUPPORT_SPL
1069         select ARCH_LS1021A
1070         select ARCH_SUPPORT_PSCI
1071         imply SCSI
1072         help
1073           Support for Freescale LS1021AIOT platform.
1074           The LS1021A Freescale board (IOT) is a high-performance
1075           development platform that supports the QorIQ LS1021A
1076           Layerscape Architecture processor.
1077
1078 config TARGET_LS1043AQDS
1079         bool "Support ls1043aqds"
1080         select ARCH_LS1043A
1081         select ARM64
1082         select ARMV8_MULTIENTRY
1083         select BOARD_LATE_INIT
1084         select SUPPORT_SPL
1085         select BOARD_EARLY_INIT_F
1086         imply SCSI
1087         help
1088           Support for Freescale LS1043AQDS platform.
1089
1090 config TARGET_LS1043ARDB
1091         bool "Support ls1043ardb"
1092         select ARCH_LS1043A
1093         select ARM64
1094         select ARMV8_MULTIENTRY
1095         select BOARD_LATE_INIT
1096         select SUPPORT_SPL
1097         select BOARD_EARLY_INIT_F
1098         imply SCSI
1099         help
1100           Support for Freescale LS1043ARDB platform.
1101
1102 config TARGET_LS1046AQDS
1103         bool "Support ls1046aqds"
1104         select ARCH_LS1046A
1105         select ARM64
1106         select ARMV8_MULTIENTRY
1107         select BOARD_LATE_INIT
1108         select SUPPORT_SPL
1109         select DM_SPI_FLASH if DM_SPI
1110         select BOARD_EARLY_INIT_F
1111         imply SCSI
1112         help
1113           Support for Freescale LS1046AQDS platform.
1114           The LS1046A Development System (QDS) is a high-performance
1115           development platform that supports the QorIQ LS1046A
1116           Layerscape Architecture processor.
1117
1118 config TARGET_LS1046ARDB
1119         bool "Support ls1046ardb"
1120         select ARCH_LS1046A
1121         select ARM64
1122         select ARMV8_MULTIENTRY
1123         select BOARD_LATE_INIT
1124         select SUPPORT_SPL
1125         select DM_SPI_FLASH if DM_SPI
1126         select POWER_MC34VR500
1127         select BOARD_EARLY_INIT_F
1128         imply SCSI
1129         help
1130           Support for Freescale LS1046ARDB platform.
1131           The LS1046A Reference Design Board (RDB) is a high-performance
1132           development platform that supports the QorIQ LS1046A
1133           Layerscape Architecture processor.
1134
1135 config TARGET_H2200
1136         bool "Support h2200"
1137         select CPU_PXA
1138
1139 config TARGET_ZIPITZ2
1140         bool "Support zipitz2"
1141         select CPU_PXA
1142
1143 config TARGET_COLIBRI_PXA270
1144         bool "Support colibri_pxa270"
1145         select CPU_PXA
1146
1147 config ARCH_UNIPHIER
1148         bool "Socionext UniPhier SoCs"
1149         select BOARD_LATE_INIT
1150         select DM
1151         select DM_GPIO
1152         select DM_I2C
1153         select DM_MMC
1154         select DM_RESET
1155         select DM_SERIAL
1156         select DM_USB
1157         select OF_CONTROL
1158         select OF_LIBFDT
1159         select PINCTRL
1160         select SPL_BOARD_INIT if SPL
1161         select SPL_DM if SPL
1162         select SPL_LIBCOMMON_SUPPORT if SPL
1163         select SPL_LIBGENERIC_SUPPORT if SPL
1164         select SPL_OF_CONTROL if SPL
1165         select SPL_PINCTRL if SPL
1166         select SUPPORT_SPL
1167         imply FAT_WRITE
1168         help
1169           Support for UniPhier SoC family developed by Socionext Inc.
1170           (formerly, System LSI Business Division of Panasonic Corporation)
1171
1172 config STM32
1173         bool "Support STM32"
1174         select CPU_V7M
1175         select DM
1176         select DM_SERIAL
1177         select SYS_THUMB_BUILD
1178
1179 config ARCH_STI
1180         bool "Support STMicrolectronics SoCs"
1181         select CPU_V7
1182         select DM
1183         select DM_SERIAL
1184         select BLK
1185         select DM_MMC
1186         select DM_RESET
1187         help
1188           Support for STMicroelectronics STiH407/10 SoC family.
1189           This SoC is used on Linaro 96Board STiH410-B2260
1190
1191 config ARCH_ROCKCHIP
1192         bool "Support Rockchip SoCs"
1193         select OF_CONTROL
1194         select BLK
1195         select DM
1196         select SPL_DM if SPL
1197         select SYS_MALLOC_F
1198         select SYS_THUMB_BUILD if !ARM64
1199         select SPL_SYS_MALLOC_SIMPLE if SPL
1200         select DM_GPIO
1201         select DM_I2C
1202         select DM_MMC
1203         select DM_SERIAL
1204         select DM_SPI
1205         select DM_SPI_FLASH
1206         select DM_USB if USB
1207         select DM_PWM
1208         select DM_REGULATOR
1209         select ENABLE_ARM_SOC_BOOT0_HOOK
1210         imply CMD_FASTBOOT
1211         imply FASTBOOT
1212         imply FAT_WRITE
1213         imply USB_FUNCTION_FASTBOOT
1214         imply SPL_SYSRESET
1215         imply TPL_SYSRESET
1216         imply ADC
1217         imply SARADC_ROCKCHIP
1218
1219 config TARGET_THUNDERX_88XX
1220         bool "Support ThunderX 88xx"
1221         select ARM64
1222         select OF_CONTROL
1223         select SYS_CACHE_SHIFT_7
1224         select PL01X_SERIAL
1225
1226 config ARCH_ASPEED
1227         bool "Support Aspeed SoCs"
1228         select OF_CONTROL
1229         select DM
1230
1231 endchoice
1232
1233 source "arch/arm/mach-aspeed/Kconfig"
1234
1235 source "arch/arm/mach-at91/Kconfig"
1236
1237 source "arch/arm/mach-bcm283x/Kconfig"
1238
1239 source "arch/arm/mach-davinci/Kconfig"
1240
1241 source "arch/arm/mach-exynos/Kconfig"
1242
1243 source "arch/arm/mach-highbank/Kconfig"
1244
1245 source "arch/arm/mach-integrator/Kconfig"
1246
1247 source "arch/arm/mach-keystone/Kconfig"
1248
1249 source "arch/arm/mach-kirkwood/Kconfig"
1250
1251 source "arch/arm/mach-mvebu/Kconfig"
1252
1253 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1254
1255 source "arch/arm/mach-imx/mx2/Kconfig"
1256
1257 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1258
1259 source "arch/arm/mach-imx/mx7/Kconfig"
1260
1261 source "arch/arm/mach-imx/mx6/Kconfig"
1262
1263 source "arch/arm/mach-imx/mx5/Kconfig"
1264
1265 source "arch/arm/mach-omap2/Kconfig"
1266
1267 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1268
1269 source "arch/arm/mach-orion5x/Kconfig"
1270
1271 source "arch/arm/mach-rmobile/Kconfig"
1272
1273 source "arch/arm/mach-meson/Kconfig"
1274
1275 source "arch/arm/mach-qemu/Kconfig"
1276
1277 source "arch/arm/mach-rockchip/Kconfig"
1278
1279 source "arch/arm/mach-s5pc1xx/Kconfig"
1280
1281 source "arch/arm/mach-snapdragon/Kconfig"
1282
1283 source "arch/arm/mach-socfpga/Kconfig"
1284
1285 source "arch/arm/mach-sti/Kconfig"
1286
1287 source "arch/arm/mach-stm32/Kconfig"
1288
1289 source "arch/arm/mach-sunxi/Kconfig"
1290
1291 source "arch/arm/mach-tegra/Kconfig"
1292
1293 source "arch/arm/mach-uniphier/Kconfig"
1294
1295 source "arch/arm/cpu/armv7/vf610/Kconfig"
1296
1297 source "arch/arm/mach-zynq/Kconfig"
1298
1299 source "arch/arm/cpu/armv7/Kconfig"
1300
1301 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1302
1303 source "arch/arm/cpu/armv8/Kconfig"
1304
1305 source "arch/arm/mach-imx/Kconfig"
1306
1307 source "board/aries/m28evk/Kconfig"
1308 source "board/bosch/shc/Kconfig"
1309 source "board/CarMediaLab/flea3/Kconfig"
1310 source "board/Marvell/aspenite/Kconfig"
1311 source "board/Marvell/gplugd/Kconfig"
1312 source "board/armadeus/apf27/Kconfig"
1313 source "board/armltd/vexpress/Kconfig"
1314 source "board/armltd/vexpress64/Kconfig"
1315 source "board/bluegiga/apx4devkit/Kconfig"
1316 source "board/broadcom/bcm23550_w1d/Kconfig"
1317 source "board/broadcom/bcm28155_ap/Kconfig"
1318 source "board/broadcom/bcmcygnus/Kconfig"
1319 source "board/broadcom/bcmnsp/Kconfig"
1320 source "board/broadcom/bcmns2/Kconfig"
1321 source "board/cavium/thunderx/Kconfig"
1322 source "board/cirrus/edb93xx/Kconfig"
1323 source "board/creative/xfi3/Kconfig"
1324 source "board/eets/pdu001/Kconfig"
1325 source "board/freescale/ls2080a/Kconfig"
1326 source "board/freescale/ls2080aqds/Kconfig"
1327 source "board/freescale/ls2080ardb/Kconfig"
1328 source "board/freescale/ls1088a/Kconfig"
1329 source "board/freescale/ls1021aqds/Kconfig"
1330 source "board/freescale/ls1043aqds/Kconfig"
1331 source "board/freescale/ls1021atwr/Kconfig"
1332 source "board/freescale/ls1021aiot/Kconfig"
1333 source "board/freescale/ls1046aqds/Kconfig"
1334 source "board/freescale/ls1043ardb/Kconfig"
1335 source "board/freescale/ls1046ardb/Kconfig"
1336 source "board/freescale/ls1012aqds/Kconfig"
1337 source "board/freescale/ls1012ardb/Kconfig"
1338 source "board/freescale/ls1012afrdm/Kconfig"
1339 source "board/freescale/mx23evk/Kconfig"
1340 source "board/freescale/mx28evk/Kconfig"
1341 source "board/freescale/mx31ads/Kconfig"
1342 source "board/freescale/mx31pdk/Kconfig"
1343 source "board/freescale/mx35pdk/Kconfig"
1344 source "board/freescale/s32v234evb/Kconfig"
1345 source "board/gdsys/a38x/Kconfig"
1346 source "board/grinn/chiliboard/Kconfig"
1347 source "board/gumstix/pepper/Kconfig"
1348 source "board/h2200/Kconfig"
1349 source "board/hisilicon/hikey/Kconfig"
1350 source "board/hisilicon/poplar/Kconfig"
1351 source "board/imx31_phycore/Kconfig"
1352 source "board/isee/igep003x/Kconfig"
1353 source "board/olimex/mx23_olinuxino/Kconfig"
1354 source "board/phytec/pcm051/Kconfig"
1355 source "board/ppcag/bg0900/Kconfig"
1356 source "board/sandisk/sansa_fuze_plus/Kconfig"
1357 source "board/schulercontrol/sc_sps_1/Kconfig"
1358 source "board/silica/pengwyn/Kconfig"
1359 source "board/spear/spear300/Kconfig"
1360 source "board/spear/spear310/Kconfig"
1361 source "board/spear/spear320/Kconfig"
1362 source "board/spear/spear600/Kconfig"
1363 source "board/spear/x600/Kconfig"
1364 source "board/st/stv0991/Kconfig"
1365 source "board/tcl/sl50/Kconfig"
1366 source "board/birdland/bav335x/Kconfig"
1367 source "board/timll/devkit3250/Kconfig"
1368 source "board/toradex/colibri_pxa270/Kconfig"
1369 source "board/technologic/ts4600/Kconfig"
1370 source "board/vscom/baltos/Kconfig"
1371 source "board/woodburn/Kconfig"
1372 source "board/work-microwave/work_92105/Kconfig"
1373 source "board/zipitz2/Kconfig"
1374
1375 source "arch/arm/Kconfig.debug"
1376
1377 endmenu
1378
1379 config SPL_LDSCRIPT
1380         default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
1381         default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1382         default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
1383
1384