arch/arm/Kconfig

   1 menu "ARM architecture"
   2         depends on ARM
   3
   4 config SYS_ARCH
   5         default "arm"
   6
   7 config ARM64
   8         bool
   9         select PHYS_64BIT
  10         select SYS_CACHE_SHIFT_6
  11
  12 config DMA_ADDR_T_64BIT
  13         bool
  14         default y if ARM64
  15
  16 config HAS_VBAR
  17         bool
  18
  19 config HAS_THUMB2
  20         bool
  21
  22 # If set, the workarounds for these ARM errata are applied early during U-Boot
  23 # startup. Note that in general these options force the workarounds to be
  24 # applied; no CPU-type/version detection exists, unlike the similar options in
  25 # the Linux kernel. Do not set these options unless they apply!  Also note that
  26 # the following can be machine specific errata. These do have ability to
  27 # provide rudimentary version and machine specific checks, but expect no
  28 # product checks:
  29 # CONFIG_ARM_ERRATA_430973
  30 # CONFIG_ARM_ERRATA_454179
  31 # CONFIG_ARM_ERRATA_621766
  32 # CONFIG_ARM_ERRATA_798870
  33 # CONFIG_ARM_ERRATA_801819
  34 config ARM_ERRATA_430973
  35         bool
  36
  37 config ARM_ERRATA_454179
  38         bool
  39
  40 config ARM_ERRATA_621766
  41         bool
  42
  43 config ARM_ERRATA_716044
  44         bool
  45
  46 config ARM_ERRATA_725233
  47         bool
  48
  49 config ARM_ERRATA_742230
  50         bool
  51
  52 config ARM_ERRATA_743622
  53         bool
  54
  55 config ARM_ERRATA_751472
  56         bool
  57
  58 config ARM_ERRATA_761320
  59         bool
  60
  61 config ARM_ERRATA_773022
  62         bool
  63
  64 config ARM_ERRATA_774769
  65         bool
  66
  67 config ARM_ERRATA_794072
  68         bool
  69
  70 config ARM_ERRATA_798870
  71         bool
  72
  73 config ARM_ERRATA_801819
  74         bool
  75
  76 config ARM_ERRATA_826974
  77         bool
  78
  79 config ARM_ERRATA_828024
  80         bool
  81
  82 config ARM_ERRATA_829520
  83         bool
  84
  85 config ARM_ERRATA_833069
  86         bool
  87
  88 config ARM_ERRATA_833471
  89         bool
  90
  91 config ARM_ERRATA_852421
  92         bool
  93
  94 config ARM_ERRATA_852423
  95         bool
  96
  97 config CPU_ARM720T
  98         bool
  99         select SYS_CACHE_SHIFT_5
 100
 101 config CPU_ARM920T
 102         bool
 103         select SYS_CACHE_SHIFT_5
 104
 105 config CPU_ARM926EJS
 106         bool
 107         select SYS_CACHE_SHIFT_5
 108
 109 config CPU_ARM946ES
 110         bool
 111         select SYS_CACHE_SHIFT_5
 112
 113 config CPU_ARM1136
 114         bool
 115         select SYS_CACHE_SHIFT_5
 116
 117 config CPU_ARM1176
 118         bool
 119         select HAS_VBAR
 120         select SYS_CACHE_SHIFT_5
 121
 122 config CPU_V7
 123         bool
 124         select HAS_VBAR
 125         select HAS_THUMB2
 126         select SYS_CACHE_SHIFT_6
 127
 128 config CPU_V7M
 129         bool
 130         select HAS_THUMB2
 131         select SYS_CACHE_SHIFT_5
 132
 133 config CPU_PXA
 134         bool
 135         select SYS_CACHE_SHIFT_5
 136
 137 config CPU_SA1100
 138         bool
 139         select SYS_CACHE_SHIFT_5
 140
 141 config SYS_CPU
 142         default "arm720t" if CPU_ARM720T
 143         default "arm920t" if CPU_ARM920T
 144         default "arm926ejs" if CPU_ARM926EJS
 145         default "arm946es" if CPU_ARM946ES
 146         default "arm1136" if CPU_ARM1136
 147         default "arm1176" if CPU_ARM1176
 148         default "armv7" if CPU_V7
 149         default "armv7m" if CPU_V7M
 150         default "pxa" if CPU_PXA
 151         default "sa1100" if CPU_SA1100
 152         default "armv8" if ARM64
 153
 154 config SYS_ARM_ARCH
 155         int
 156         default 4 if CPU_ARM720T
 157         default 4 if CPU_ARM920T
 158         default 5 if CPU_ARM926EJS
 159         default 5 if CPU_ARM946ES
 160         default 6 if CPU_ARM1136
 161         default 6 if CPU_ARM1176
 162         default 7 if CPU_V7
 163         default 7 if CPU_V7M
 164         default 5 if CPU_PXA
 165         default 4 if CPU_SA1100
 166         default 8 if ARM64
 167
 168 config SYS_CACHE_SHIFT_5
 169         bool
 170
 171 config SYS_CACHE_SHIFT_6
 172         bool
 173
 174 config SYS_CACHE_SHIFT_7
 175         bool
 176
 177 config SYS_CACHELINE_SIZE
 178         int
 179         default 128 if SYS_CACHE_SHIFT_7
 180         default 64 if SYS_CACHE_SHIFT_6
 181         default 32 if SYS_CACHE_SHIFT_5
 182
 183 config ARM_SMCCC
 184         bool "Support for ARM SMC Calling Convention (SMCCC)"
 185         depends on CPU_V7 || ARM64
 186         select ARM_PSCI_FW
 187         help
 188           Say Y here if you want to enable ARM SMC Calling Convention.
 189           This should be enabled if U-Boot needs to communicate with system
 190           firmware (for example, PSCI) according to SMCCC.
 191
 192 config SEMIHOSTING
 193         bool "support boot from semihosting"
 194         help
 195           In emulated environments, semihosting is a way for
 196           the hosted environment to call out to the emulator to
 197           retrieve files from the host machine.
 198
 199 config SYS_THUMB_BUILD
 200         bool "Build U-Boot using the Thumb instruction set"
 201         depends on !ARM64
 202         help
 203            Use this flag to build U-Boot using the Thumb instruction set for
 204            ARM architectures. Thumb instruction set provides better code
 205            density. For ARM architectures that support Thumb2 this flag will
 206            result in Thumb2 code generated by GCC.
 207
 208 config SPL_SYS_THUMB_BUILD
 209         bool "Build SPL using the Thumb instruction set"
 210         default y if SYS_THUMB_BUILD
 211         depends on !ARM64
 212         help
 213            Use this flag to build SPL using the Thumb instruction set for
 214            ARM architectures. Thumb instruction set provides better code
 215            density. For ARM architectures that support Thumb2 this flag will
 216            result in Thumb2 code generated by GCC.
 217
 218 config SYS_L2CACHE_OFF
 219         bool "L2cache off"
 220         help
 221           If SoC does not support L2CACHE or one do not want to enable
 222           L2CACHE, choose this option.
 223
 224 config ENABLE_ARM_SOC_BOOT0_HOOK
 225         bool "prepare BOOT0 header"
 226         help
 227           If the SoC's BOOT0 requires a header area filled with (magic)
 228           values, then choose this option, and create a define called
 229           ARM_SOC_BOOT0_HOOK which contains the required assembler
 230           preprocessor code.
 231
 232 config ARM_CORTEX_CPU_IS_UP
 233         bool
 234         default n
 235
 236 config USE_ARCH_MEMCPY
 237         bool "Use an assembly optimized implementation of memcpy"
 238         default y
 239         depends on !ARM64
 240         help
 241           Enable the generation of an optimized version of memcpy.
 242           Such implementation may be faster under some conditions
 243           but may increase the binary size.
 244
 245 config SPL_USE_ARCH_MEMCPY
 246         bool "Use an assembly optimized implementation of memcpy"
 247         default y if USE_ARCH_MEMCPY
 248         depends on !ARM64
 249         help
 250           Enable the generation of an optimized version of memcpy.
 251           Such implementation may be faster under some conditions
 252           but may increase the binary size.
 253
 254 config USE_ARCH_MEMSET
 255         bool "Use an assembly optimized implementation of memset"
 256         default y
 257         depends on !ARM64
 258         help
 259           Enable the generation of an optimized version of memset.
 260           Such implementation may be faster under some conditions
 261           but may increase the binary size.
 262
 263 config SPL_USE_ARCH_MEMSET
 264         bool "Use an assembly optimized implementation of memset"
 265         default y if USE_ARCH_MEMSET
 266         depends on !ARM64
 267         help
 268           Enable the generation of an optimized version of memset.
 269           Such implementation may be faster under some conditions
 270           but may increase the binary size.
 271
 272 config ARM64_SUPPORT_AARCH32
 273         bool "ARM64 system support AArch32 execution state"
 274         default y if ARM64 && !TARGET_THUNDERX_88XX
 275         help
 276           This ARM64 system supports AArch32 execution state.
 277
 278 choice
 279         prompt "Target select"
 280         default TARGET_HIKEY
 281
 282 config ARCH_AT91
 283         bool "Atmel AT91"
 284         select SPL_BOARD_INIT if SPL
 285
 286 config TARGET_EDB93XX
 287         bool "Support edb93xx"
 288         select CPU_ARM920T
 289
 290 config TARGET_ASPENITE
 291         bool "Support aspenite"
 292         select CPU_ARM926EJS
 293
 294 config TARGET_GPLUGD
 295         bool "Support gplugd"
 296         select CPU_ARM926EJS
 297
 298 config ARCH_DAVINCI
 299         bool "TI DaVinci"
 300         select CPU_ARM926EJS
 301         help
 302           Support for TI's DaVinci platform.
 303
 304 config KIRKWOOD
 305         bool "Marvell Kirkwood"
 306         select CPU_ARM926EJS
 307         select BOARD_EARLY_INIT_F
 308         select ARCH_MISC_INIT
 309
 310 config ARCH_MVEBU
 311         bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 312         select OF_CONTROL
 313         select OF_SEPARATE
 314         select DM
 315         select DM_ETH
 316         select DM_SERIAL
 317         select DM_SPI
 318         select DM_SPI_FLASH
 319
 320 config TARGET_DEVKIT3250
 321         bool "Support devkit3250"
 322         select CPU_ARM926EJS
 323         select SUPPORT_SPL
 324
 325 config TARGET_WORK_92105
 326         bool "Support work_92105"
 327         select CPU_ARM926EJS
 328         select SUPPORT_SPL
 329
 330 config TARGET_MX25PDK
 331         bool "Support mx25pdk"
 332         select BOARD_LATE_INIT
 333         select CPU_ARM926EJS
 334         select BOARD_EARLY_INIT_F
 335
 336 config TARGET_ZMX25
 337         bool "Support zmx25"
 338         select BOARD_LATE_INIT
 339         select CPU_ARM926EJS
 340
 341 config TARGET_APF27
 342         bool "Support apf27"
 343         select CPU_ARM926EJS
 344         select SUPPORT_SPL
 345
 346 config TARGET_APX4DEVKIT
 347         bool "Support apx4devkit"
 348         select CPU_ARM926EJS
 349         select SUPPORT_SPL
 350
 351 config TARGET_XFI3
 352         bool "Support xfi3"
 353         select CPU_ARM926EJS
 354         select SUPPORT_SPL
 355
 356 config TARGET_M28EVK
 357         bool "Support m28evk"
 358         select CPU_ARM926EJS
 359         select SUPPORT_SPL
 360
 361 config TARGET_MX23EVK
 362         bool "Support mx23evk"
 363         select CPU_ARM926EJS
 364         select SUPPORT_SPL
 365         select BOARD_EARLY_INIT_F
 366
 367 config TARGET_MX28EVK
 368         bool "Support mx28evk"
 369         select CPU_ARM926EJS
 370         select SUPPORT_SPL
 371         select BOARD_EARLY_INIT_F
 372
 373 config TARGET_MX23_OLINUXINO
 374         bool "Support mx23_olinuxino"
 375         select CPU_ARM926EJS
 376         select SUPPORT_SPL
 377         select BOARD_EARLY_INIT_F
 378
 379 config TARGET_BG0900
 380         bool "Support bg0900"
 381         select CPU_ARM926EJS
 382         select SUPPORT_SPL
 383
 384 config TARGET_SANSA_FUZE_PLUS
 385         bool "Support sansa_fuze_plus"
 386         select CPU_ARM926EJS
 387         select SUPPORT_SPL
 388
 389 config TARGET_SC_SPS_1
 390         bool "Support sc_sps_1"
 391         select CPU_ARM926EJS
 392         select SUPPORT_SPL
 393
 394 config ORION5X
 395         bool "Marvell Orion"
 396         select CPU_ARM926EJS
 397
 398 config TARGET_SPEAR300
 399         bool "Support spear300"
 400         select CPU_ARM926EJS
 401         select BOARD_EARLY_INIT_F
 402
 403 config TARGET_SPEAR310
 404         bool "Support spear310"
 405         select CPU_ARM926EJS
 406         select BOARD_EARLY_INIT_F
 407
 408 config TARGET_SPEAR320
 409         bool "Support spear320"
 410         select CPU_ARM926EJS
 411         select BOARD_EARLY_INIT_F
 412
 413 config TARGET_SPEAR600
 414         bool "Support spear600"
 415         select CPU_ARM926EJS
 416         select BOARD_EARLY_INIT_F
 417
 418 config TARGET_STV0991
 419         bool "Support stv0991"
 420         select CPU_V7
 421         select DM
 422         select DM_SERIAL
 423         select DM_SPI
 424         select DM_SPI_FLASH
 425         select SPI_FLASH
 426
 427 config TARGET_X600
 428         bool "Support x600"
 429         select BOARD_LATE_INIT
 430         select CPU_ARM926EJS
 431         select SUPPORT_SPL
 432
 433 config TARGET_IMX31_PHYCORE
 434         bool "Support imx31_phycore_eet"
 435         select CPU_ARM1136
 436         select BOARD_EARLY_INIT_F
 437
 438 config TARGET_IMX31_PHYCORE_EET
 439         bool "Support imx31_phycore_eet"
 440         select BOARD_LATE_INIT
 441         select CPU_ARM1136
 442         select BOARD_EARLY_INIT_F
 443
 444 config TARGET_MX31ADS
 445         bool "Support mx31ads"
 446         select CPU_ARM1136
 447         select BOARD_EARLY_INIT_F
 448
 449 config TARGET_MX31PDK
 450         bool "Support mx31pdk"
 451         select BOARD_LATE_INIT
 452         select CPU_ARM1136
 453         select SUPPORT_SPL
 454         select BOARD_EARLY_INIT_F
 455
 456 config TARGET_WOODBURN
 457         bool "Support woodburn"
 458         select CPU_ARM1136
 459
 460 config TARGET_WOODBURN_SD
 461         bool "Support woodburn_sd"
 462         select CPU_ARM1136
 463         select SUPPORT_SPL
 464
 465 config TARGET_FLEA3
 466         bool "Support flea3"
 467         select CPU_ARM1136
 468
 469 config TARGET_MX35PDK
 470         bool "Support mx35pdk"
 471         select BOARD_LATE_INIT
 472         select CPU_ARM1136
 473
 474 config ARCH_BCM283X
 475         bool "Broadcom BCM283X family"
 476         select DM
 477         select DM_SERIAL
 478         select DM_GPIO
 479         select OF_CONTROL
 480         imply FAT_WRITE
 481
 482 config TARGET_VEXPRESS_CA15_TC2
 483         bool "Support vexpress_ca15_tc2"
 484         select CPU_V7
 485         select CPU_V7_HAS_NONSEC
 486         select CPU_V7_HAS_VIRT
 487
 488 config TARGET_VEXPRESS_CA5X2
 489         bool "Support vexpress_ca5x2"
 490         select CPU_V7
 491
 492 config TARGET_VEXPRESS_CA9X4
 493         bool "Support vexpress_ca9x4"
 494         select CPU_V7
 495
 496 config TARGET_BCM23550_W1D
 497         bool "Support bcm23550_w1d"
 498         select CPU_V7
 499         imply CRC32_VERIFY
 500         imply FAT_WRITE
 501
 502 config TARGET_BCM28155_AP
 503         bool "Support bcm28155_ap"
 504         select CPU_V7
 505         imply CRC32_VERIFY
 506         imply FAT_WRITE
 507
 508 config TARGET_BCMCYGNUS
 509         bool "Support bcmcygnus"
 510         select CPU_V7
 511         imply CRC32_VERIFY
 512         imply CMD_HASH
 513         imply FAT_WRITE
 514         imply HASH_VERIFY
 515
 516 config TARGET_BCMNSP
 517         bool "Support bcmnsp"
 518         select CPU_V7
 519
 520 config TARGET_BCMNS2
 521         bool "Support Broadcom Northstar2"
 522         select ARM64
 523         help
 524           Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
 525           ARMv8 Cortex-A57 processors targeting a broad range of networking
 526           applications
 527
 528 config ARCH_EXYNOS
 529         bool "Samsung EXYNOS"
 530         select DM
 531         select DM_I2C
 532         select DM_SPI_FLASH
 533         select DM_SERIAL
 534         select DM_SPI
 535         select DM_GPIO
 536         select DM_KEYBOARD
 537         imply FAT_WRITE
 538
 539 config ARCH_S5PC1XX
 540         bool "Samsung S5PC1XX"
 541         select CPU_V7
 542         select DM
 543         select DM_SERIAL
 544         select DM_GPIO
 545         select DM_I2C
 546
 547 config ARCH_HIGHBANK
 548         bool "Calxeda Highbank"
 549         select CPU_V7
 550
 551 config ARCH_INTEGRATOR
 552         bool "ARM Ltd. Integrator family"
 553         select DM
 554         select DM_SERIAL
 555
 556 config ARCH_KEYSTONE
 557         bool "TI Keystone"
 558         select CPU_V7
 559         select SUPPORT_SPL
 560         select SYS_THUMB_BUILD
 561         select CMD_POWEROFF
 562         imply FIT
 563
 564 config ARCH_OMAP2PLUS
 565         bool "TI OMAP2+"
 566         select CPU_V7
 567         select SPL_BOARD_INIT if SPL
 568         select SUPPORT_SPL
 569         imply FIT
 570
 571 config ARCH_MESON
 572         bool "Amlogic Meson"
 573         help
 574           Support for the Meson SoC family developed by Amlogic Inc.,
 575           targeted at media players and tablet computers. We currently
 576           support the S905 (GXBaby) 64-bit SoC.
 577
 578 config ARCH_MX7ULP
 579         bool "NXP MX7ULP"
 580         select CPU_V7
 581         select ROM_UNIFIED_SECTIONS
 582
 583 config ARCH_MX7
 584         bool "Freescale MX7"
 585         select CPU_V7
 586         select SYS_FSL_HAS_SEC if SECURE_BOOT
 587         select SYS_FSL_SEC_COMPAT_4
 588         select SYS_FSL_SEC_LE
 589         select BOARD_EARLY_INIT_F
 590         select ARCH_MISC_INIT
 591
 592 config ARCH_MX6
 593         bool "Freescale MX6"
 594         select CPU_V7
 595         select SYS_FSL_HAS_SEC if SECURE_BOOT
 596         select SYS_FSL_SEC_COMPAT_4
 597         select SYS_FSL_SEC_LE
 598         select SYS_THUMB_BUILD if SPL
 599
 600 config ARCH_MX5
 601         bool "Freescale MX5"
 602         select CPU_V7
 603         select BOARD_EARLY_INIT_F
 604
 605 config ARCH_RMOBILE
 606         bool "Renesas ARM SoCs"
 607         select DM
 608         select DM_SERIAL
 609         select BOARD_EARLY_INIT_F
 610         imply FAT_WRITE
 611         imply SYS_THUMB_BUILD
 612
 613 config TARGET_S32V234EVB
 614         bool "Support s32v234evb"
 615         select ARM64
 616         select SYS_FSL_ERRATUM_ESDHC111
 617
 618 config ARCH_SNAPDRAGON
 619         bool "Qualcomm Snapdragon SoCs"
 620         select ARM64
 621         select DM
 622         select DM_GPIO
 623         select DM_SERIAL
 624         select SPMI
 625         select OF_CONTROL
 626         select OF_SEPARATE
 627
 628 config ARCH_SOCFPGA
 629         bool "Altera SOCFPGA family"
 630         select CPU_V7
 631         select SUPPORT_SPL
 632         select OF_CONTROL
 633         select SPL_OF_CONTROL
 634         select DM
 635         select DM_SPI_FLASH
 636         select DM_SPI
 637         select ENABLE_ARM_SOC_BOOT0_HOOK
 638         select ARCH_EARLY_INIT_R
 639         select ARCH_MISC_INIT
 640         select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 641         select SYS_THUMB_BUILD
 642         imply CRC32_VERIFY
 643         imply FAT_WRITE
 644
 645 config ARCH_SUNXI
 646         bool "Support sunxi (Allwinner) SoCs"
 647         select CMD_GPIO
 648         select CMD_MMC if MMC
 649         select CMD_USB if DISTRO_DEFAULTS
 650         select DM
 651         select DM_ETH
 652         select DM_GPIO
 653         select DM_KEYBOARD
 654         select DM_SERIAL
 655         select DM_USB if DISTRO_DEFAULTS
 656         select OF_BOARD_SETUP
 657         select OF_CONTROL
 658         select OF_SEPARATE
 659         select SPL_STACK_R if SUPPORT_SPL
 660         select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
 661         select SYS_NS16550
 662         select SPL_SYS_THUMB_BUILD if !ARM64
 663         select USB if DISTRO_DEFAULTS
 664         select USB_STORAGE if DISTRO_DEFAULTS
 665         select USB_KEYBOARD if DISTRO_DEFAULTS
 666         select USE_TINY_PRINTF
 667         imply FAT_WRITE
 668         imply PRE_CONSOLE_BUFFER
 669         imply SPL_GPIO_SUPPORT
 670         imply SPL_LIBCOMMON_SUPPORT
 671         imply SPL_LIBDISK_SUPPORT
 672         imply SPL_LIBGENERIC_SUPPORT
 673         imply SPL_MMC_SUPPORT if MMC
 674         imply SPL_POWER_SUPPORT
 675         imply SPL_SERIAL_SUPPORT
 676
 677 config TARGET_TS4600
 678         bool "Support TS4600"
 679         select CPU_ARM926EJS
 680         select SUPPORT_SPL
 681
 682 config ARCH_VF610
 683         bool "Freescale Vybrid"
 684         select CPU_V7
 685         select SYS_FSL_ERRATUM_ESDHC111
 686
 687 config ARCH_ZYNQ
 688         bool "Xilinx Zynq Platform"
 689         select BOARD_LATE_INIT
 690         select CPU_V7
 691         select SUPPORT_SPL
 692         select OF_CONTROL
 693         select SPL_BOARD_INIT if SPL
 694         select SPL_OF_CONTROL if SPL
 695         select DM
 696         select DM_ETH
 697         select DM_GPIO
 698         select SPL_DM if SPL
 699         select DM_MMC
 700         select DM_MMC_OPS
 701         select DM_SPI
 702         select DM_SERIAL
 703         select DM_SPI_FLASH
 704         select SPL_SEPARATE_BSS if SPL
 705         select DM_USB if USB
 706         select BLK
 707         select CLK
 708         select SPL_CLK
 709         select CLK_ZYNQ
 710         imply CMD_CLK
 711         imply FAT_WRITE
 712
 713 config ARCH_ZYNQMP
 714         bool "Support Xilinx ZynqMP Platform"
 715         select ARM64
 716         select BOARD_LATE_INIT
 717         select DM
 718         select OF_CONTROL
 719         select DM_SERIAL
 720         select SUPPORT_SPL
 721         select CLK
 722         select SPL_BOARD_INIT if SPL
 723         select SPL_CLK
 724         select DM_USB if USB
 725         imply FAT_WRITE
 726
 727 config TEGRA
 728         bool "NVIDIA Tegra"
 729         imply FAT_WRITE
 730
 731 config TARGET_VEXPRESS64_AEMV8A
 732         bool "Support vexpress_aemv8a"
 733         select ARM64
 734
 735 config TARGET_VEXPRESS64_BASE_FVP
 736         bool "Support Versatile Express ARMv8a FVP BASE model"
 737         select ARM64
 738         select SEMIHOSTING
 739
 740 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 741         bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 742         select ARM64
 743         help
 744           This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 745           the default config to allow the user to load the images directly into
 746           DRAM using model parameters rather than by using semi-hosting to load
 747           the files from the host filesystem.
 748
 749 config TARGET_VEXPRESS64_JUNO
 750         bool "Support Versatile Express Juno Development Platform"
 751         select ARM64
 752
 753 config TARGET_LS2080A_EMU
 754         bool "Support ls2080a_emu"
 755         select ARCH_LS2080A
 756         select ARM64
 757         select ARMV8_MULTIENTRY
 758         select ARCH_MISC_INIT
 759         help
 760           Support for Freescale LS2080A_EMU platform
 761           The LS2080A Development System (EMULATOR) is a pre silicon
 762           development platform that supports the QorIQ LS2080A
 763           Layerscape Architecture processor.
 764
 765 config TARGET_LS2080A_SIMU
 766         bool "Support ls2080a_simu"
 767         select ARCH_LS2080A
 768         select ARM64
 769         select ARMV8_MULTIENTRY
 770         select ARCH_MISC_INIT
 771         help
 772           Support for Freescale LS2080A_SIMU platform
 773           The LS2080A Development System (QDS) is a pre silicon
 774           development platform that supports the QorIQ LS2080A
 775           Layerscape Architecture processor.
 776
 777 config TARGET_LS2080AQDS
 778         bool "Support ls2080aqds"
 779         select ARCH_LS2080A
 780         select ARM64
 781         select ARMV8_MULTIENTRY
 782         select BOARD_LATE_INIT
 783         select SUPPORT_SPL
 784         select ARCH_MISC_INIT
 785         help
 786           Support for Freescale LS2080AQDS platform
 787           The LS2080A Development System (QDS) is a high-performance
 788           development platform that supports the QorIQ LS2080A
 789           Layerscape Architecture processor.
 790
 791 config TARGET_LS2080ARDB
 792         bool "Support ls2080ardb"
 793         select ARCH_LS2080A
 794         select ARM64
 795         select ARMV8_MULTIENTRY
 796         select BOARD_LATE_INIT
 797         select SUPPORT_SPL
 798         select ARCH_MISC_INIT
 799         help
 800           Support for Freescale LS2080ARDB platform.
 801           The LS2080A Reference design board (RDB) is a high-performance
 802           development platform that supports the QorIQ LS2080A
 803           Layerscape Architecture processor.
 804
 805 config TARGET_LS2081ARDB
 806         bool "Support ls2081ardb"
 807         select ARCH_LS2080A
 808         select ARM64
 809         select ARMV8_MULTIENTRY
 810         select BOARD_LATE_INIT
 811         select SUPPORT_SPL
 812         select ARCH_MISC_INIT
 813         help
 814           Support for Freescale LS2081ARDB platform.
 815           The LS2081A Reference design board (RDB) is a high-performance
 816           development platform that supports the QorIQ LS2081A/LS2041A
 817           Layerscape Architecture processor.
 818
 819 config TARGET_HIKEY
 820         bool "Support HiKey 96boards Consumer Edition Platform"
 821         select ARM64
 822         select DM
 823         select DM_GPIO
 824         select DM_SERIAL
 825         select OF_CONTROL
 826           help
 827           Support for HiKey 96boards platform. It features a HI6220
 828           SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 829
 830 config TARGET_LS1012AQDS
 831         bool "Support ls1012aqds"
 832         select ARCH_LS1012A
 833         select ARM64
 834         select BOARD_LATE_INIT
 835         help
 836           Support for Freescale LS1012AQDS platform.
 837           The LS1012A Development System (QDS) is a high-performance
 838           development platform that supports the QorIQ LS1012A
 839           Layerscape Architecture processor.
 840
 841 config TARGET_LS1012ARDB
 842         bool "Support ls1012ardb"
 843         select ARCH_LS1012A
 844         select ARM64
 845         select BOARD_LATE_INIT
 846         help
 847           Support for Freescale LS1012ARDB platform.
 848           The LS1012A Reference design board (RDB) is a high-performance
 849           development platform that supports the QorIQ LS1012A
 850           Layerscape Architecture processor.
 851
 852 config TARGET_LS1012AFRDM
 853         bool "Support ls1012afrdm"
 854         select ARCH_LS1012A
 855         select ARM64
 856         help
 857           Support for Freescale LS1012AFRDM platform.
 858           The LS1012A Freedom  board (FRDM) is a high-performance
 859           development platform that supports the QorIQ LS1012A
 860           Layerscape Architecture processor.
 861
 862 config TARGET_LS1021AQDS
 863         bool "Support ls1021aqds"
 864         select BOARD_LATE_INIT
 865         select CPU_V7
 866         select CPU_V7_HAS_NONSEC
 867         select CPU_V7_HAS_VIRT
 868         select SUPPORT_SPL
 869         select ARCH_LS1021A
 870         select ARCH_SUPPORT_PSCI
 871         select LS1_DEEP_SLEEP
 872         select SYS_FSL_DDR
 873         select BOARD_EARLY_INIT_F
 874
 875 config TARGET_LS1021ATWR
 876         bool "Support ls1021atwr"
 877         select BOARD_LATE_INIT
 878         select CPU_V7
 879         select CPU_V7_HAS_NONSEC
 880         select CPU_V7_HAS_VIRT
 881         select SUPPORT_SPL
 882         select ARCH_LS1021A
 883         select ARCH_SUPPORT_PSCI
 884         select LS1_DEEP_SLEEP
 885         select BOARD_EARLY_INIT_F
 886
 887 config TARGET_LS1021AIOT
 888         bool "Support ls1021aiot"
 889         select BOARD_LATE_INIT
 890         select CPU_V7
 891         select CPU_V7_HAS_NONSEC
 892         select CPU_V7_HAS_VIRT
 893         select SUPPORT_SPL
 894         select ARCH_LS1021A
 895         select ARCH_SUPPORT_PSCI
 896         help
 897           Support for Freescale LS1021AIOT platform.
 898           The LS1021A Freescale board (IOT) is a high-performance
 899           development platform that supports the QorIQ LS1021A
 900           Layerscape Architecture processor.
 901
 902 config TARGET_LS1043AQDS
 903         bool "Support ls1043aqds"
 904         select ARCH_LS1043A
 905         select ARM64
 906         select ARMV8_MULTIENTRY
 907         select BOARD_LATE_INIT
 908         select SUPPORT_SPL
 909         select BOARD_EARLY_INIT_F
 910         help
 911           Support for Freescale LS1043AQDS platform.
 912
 913 config TARGET_LS1043ARDB
 914         bool "Support ls1043ardb"
 915         select ARCH_LS1043A
 916         select ARM64
 917         select ARMV8_MULTIENTRY
 918         select BOARD_LATE_INIT
 919         select SUPPORT_SPL
 920         select BOARD_EARLY_INIT_F
 921         help
 922           Support for Freescale LS1043ARDB platform.
 923
 924 config TARGET_LS1046AQDS
 925         bool "Support ls1046aqds"
 926         select ARCH_LS1046A
 927         select ARM64
 928         select ARMV8_MULTIENTRY
 929         select BOARD_LATE_INIT
 930         select SUPPORT_SPL
 931         select DM_SPI_FLASH if DM_SPI
 932         select BOARD_EARLY_INIT_F
 933         help
 934           Support for Freescale LS1046AQDS platform.
 935           The LS1046A Development System (QDS) is a high-performance
 936           development platform that supports the QorIQ LS1046A
 937           Layerscape Architecture processor.
 938
 939 config TARGET_LS1046ARDB
 940         bool "Support ls1046ardb"
 941         select ARCH_LS1046A
 942         select ARM64
 943         select ARMV8_MULTIENTRY
 944         select BOARD_LATE_INIT
 945         select SUPPORT_SPL
 946         select DM_SPI_FLASH if DM_SPI
 947         select POWER_MC34VR500
 948         select BOARD_EARLY_INIT_F
 949         help
 950           Support for Freescale LS1046ARDB platform.
 951           The LS1046A Reference Design Board (RDB) is a high-performance
 952           development platform that supports the QorIQ LS1046A
 953           Layerscape Architecture processor.
 954
 955 config TARGET_H2200
 956         bool "Support h2200"
 957         select CPU_PXA
 958
 959 config TARGET_ZIPITZ2
 960         bool "Support zipitz2"
 961         select CPU_PXA
 962
 963 config TARGET_COLIBRI_PXA270
 964         bool "Support colibri_pxa270"
 965         select CPU_PXA
 966
 967 config ARCH_UNIPHIER
 968         bool "Socionext UniPhier SoCs"
 969         select BOARD_LATE_INIT
 970         select CLK_UNIPHIER
 971         select DM
 972         select DM_GPIO
 973         select DM_I2C
 974         select DM_MMC
 975         select DM_RESET
 976         select DM_SERIAL
 977         select DM_USB
 978         select OF_CONTROL
 979         select OF_LIBFDT
 980         select PINCTRL
 981         select SPL_BOARD_INIT if SPL
 982         select SPL_DM if SPL
 983         select SPL_LIBCOMMON_SUPPORT if SPL
 984         select SPL_LIBGENERIC_SUPPORT if SPL
 985         select SPL_OF_CONTROL if SPL
 986         select SPL_PINCTRL if SPL
 987         select SUPPORT_SPL
 988         imply FAT_WRITE
 989         help
 990           Support for UniPhier SoC family developed by Socionext Inc.
 991           (formerly, System LSI Business Division of Panasonic Corporation)
 992
 993 config STM32
 994         bool "Support STM32"
 995         select CPU_V7M
 996         select DM
 997         select DM_SERIAL
 998         select SYS_THUMB_BUILD
 999
1000 config ARCH_STI
1001         bool "Support STMicrolectronics SoCs"
1002         select CPU_V7
1003         select DM
1004         select DM_SERIAL
1005         select BLK
1006         select DM_MMC
1007         select DM_RESET
1008         help
1009           Support for STMicroelectronics STiH407/10 SoC family.
1010           This SoC is used on Linaro 96Board STiH410-B2260
1011
1012 config ARCH_ROCKCHIP
1013         bool "Support Rockchip SoCs"
1014         select OF_CONTROL
1015         select BLK
1016         select DM
1017         select SPL_DM if SPL
1018         select SYS_MALLOC_F
1019         select SYS_THUMB_BUILD if !ARM64
1020         select SPL_SYS_MALLOC_SIMPLE if SPL
1021         select DM_GPIO
1022         select DM_I2C
1023         select DM_MMC
1024         select DM_MMC_OPS
1025         select DM_SERIAL
1026         select DM_SPI
1027         select DM_SPI_FLASH
1028         select DM_USB if USB
1029         select DM_PWM
1030         select DM_REGULATOR
1031         imply FAT_WRITE
1032
1033 config TARGET_THUNDERX_88XX
1034         bool "Support ThunderX 88xx"
1035         select ARM64
1036         select OF_CONTROL
1037         select SYS_CACHE_SHIFT_7
1038
1039 config ARCH_ASPEED
1040         bool "Support Aspeed SoCs"
1041         select OF_CONTROL
1042         select DM
1043
1044 endchoice
1045
1046 source "arch/arm/mach-aspeed/Kconfig"
1047
1048 source "arch/arm/mach-at91/Kconfig"
1049
1050 source "arch/arm/mach-bcm283x/Kconfig"
1051
1052 source "arch/arm/mach-davinci/Kconfig"
1053
1054 source "arch/arm/mach-exynos/Kconfig"
1055
1056 source "arch/arm/mach-highbank/Kconfig"
1057
1058 source "arch/arm/mach-integrator/Kconfig"
1059
1060 source "arch/arm/mach-keystone/Kconfig"
1061
1062 source "arch/arm/mach-kirkwood/Kconfig"
1063
1064 source "arch/arm/mach-mvebu/Kconfig"
1065
1066 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1067
1068 source "arch/arm/cpu/armv7/mx7ulp/Kconfig"
1069
1070 source "arch/arm/cpu/armv7/mx7/Kconfig"
1071
1072 source "arch/arm/cpu/armv7/mx6/Kconfig"
1073
1074 source "arch/arm/cpu/armv7/mx5/Kconfig"
1075
1076 source "arch/arm/mach-omap2/Kconfig"
1077
1078 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1079
1080 source "arch/arm/mach-orion5x/Kconfig"
1081
1082 source "arch/arm/mach-rmobile/Kconfig"
1083
1084 source "arch/arm/mach-meson/Kconfig"
1085
1086 source "arch/arm/mach-rockchip/Kconfig"
1087
1088 source "arch/arm/mach-s5pc1xx/Kconfig"
1089
1090 source "arch/arm/mach-snapdragon/Kconfig"
1091
1092 source "arch/arm/mach-socfpga/Kconfig"
1093
1094 source "arch/arm/mach-sti/Kconfig"
1095
1096 source "arch/arm/mach-stm32/Kconfig"
1097
1098 source "arch/arm/mach-sunxi/Kconfig"
1099
1100 source "arch/arm/mach-tegra/Kconfig"
1101
1102 source "arch/arm/mach-uniphier/Kconfig"
1103
1104 source "arch/arm/cpu/armv7/vf610/Kconfig"
1105
1106 source "arch/arm/mach-zynq/Kconfig"
1107
1108 source "arch/arm/cpu/armv7/Kconfig"
1109
1110 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1111
1112 source "arch/arm/cpu/armv8/Kconfig"
1113
1114 source "arch/arm/imx-common/Kconfig"
1115
1116 source "board/aries/m28evk/Kconfig"
1117 source "board/bosch/shc/Kconfig"
1118 source "board/CarMediaLab/flea3/Kconfig"
1119 source "board/Marvell/aspenite/Kconfig"
1120 source "board/Marvell/gplugd/Kconfig"
1121 source "board/armadeus/apf27/Kconfig"
1122 source "board/armltd/vexpress/Kconfig"
1123 source "board/armltd/vexpress64/Kconfig"
1124 source "board/bluegiga/apx4devkit/Kconfig"
1125 source "board/broadcom/bcm23550_w1d/Kconfig"
1126 source "board/broadcom/bcm28155_ap/Kconfig"
1127 source "board/broadcom/bcmcygnus/Kconfig"
1128 source "board/broadcom/bcmnsp/Kconfig"
1129 source "board/broadcom/bcmns2/Kconfig"
1130 source "board/cavium/thunderx/Kconfig"
1131 source "board/cirrus/edb93xx/Kconfig"
1132 source "board/creative/xfi3/Kconfig"
1133 source "board/freescale/ls2080a/Kconfig"
1134 source "board/freescale/ls2080aqds/Kconfig"
1135 source "board/freescale/ls2080ardb/Kconfig"
1136 source "board/freescale/ls1021aqds/Kconfig"
1137 source "board/freescale/ls1043aqds/Kconfig"
1138 source "board/freescale/ls1021atwr/Kconfig"
1139 source "board/freescale/ls1021aiot/Kconfig"
1140 source "board/freescale/ls1046aqds/Kconfig"
1141 source "board/freescale/ls1043ardb/Kconfig"
1142 source "board/freescale/ls1046ardb/Kconfig"
1143 source "board/freescale/ls1012aqds/Kconfig"
1144 source "board/freescale/ls1012ardb/Kconfig"
1145 source "board/freescale/ls1012afrdm/Kconfig"
1146 source "board/freescale/mx23evk/Kconfig"
1147 source "board/freescale/mx25pdk/Kconfig"
1148 source "board/freescale/mx28evk/Kconfig"
1149 source "board/freescale/mx31ads/Kconfig"
1150 source "board/freescale/mx31pdk/Kconfig"
1151 source "board/freescale/mx35pdk/Kconfig"
1152 source "board/freescale/s32v234evb/Kconfig"
1153 source "board/gdsys/a38x/Kconfig"
1154 source "board/grinn/chiliboard/Kconfig"
1155 source "board/gumstix/pepper/Kconfig"
1156 source "board/h2200/Kconfig"
1157 source "board/hisilicon/hikey/Kconfig"
1158 source "board/imx31_phycore/Kconfig"
1159 source "board/isee/igep003x/Kconfig"
1160 source "board/olimex/mx23_olinuxino/Kconfig"
1161 source "board/phytec/pcm051/Kconfig"
1162 source "board/ppcag/bg0900/Kconfig"
1163 source "board/sandisk/sansa_fuze_plus/Kconfig"
1164 source "board/schulercontrol/sc_sps_1/Kconfig"
1165 source "board/silica/pengwyn/Kconfig"
1166 source "board/spear/spear300/Kconfig"
1167 source "board/spear/spear310/Kconfig"
1168 source "board/spear/spear320/Kconfig"
1169 source "board/spear/spear600/Kconfig"
1170 source "board/spear/x600/Kconfig"
1171 source "board/st/stv0991/Kconfig"
1172 source "board/syteco/zmx25/Kconfig"
1173 source "board/tcl/sl50/Kconfig"
1174 source "board/birdland/bav335x/Kconfig"
1175 source "board/timll/devkit3250/Kconfig"
1176 source "board/toradex/colibri_pxa270/Kconfig"
1177 source "board/technologic/ts4600/Kconfig"
1178 source "board/vscom/baltos/Kconfig"
1179 source "board/woodburn/Kconfig"
1180 source "board/work-microwave/work_92105/Kconfig"
1181 source "board/zipitz2/Kconfig"
1182
1183 source "arch/arm/Kconfig.debug"
1184
1185 endmenu