arch/arm/Kconfig

   1 menu "ARM architecture"
   2         depends on ARM
   3
   4 config SYS_ARCH
   5         default "arm"
   6
   7 config ARM64
   8         bool
   9         select PHYS_64BIT
  10         select SYS_CACHE_SHIFT_6
  11
  12 config DMA_ADDR_T_64BIT
  13         bool
  14         default y if ARM64
  15
  16 config HAS_VBAR
  17         bool
  18
  19 config HAS_THUMB2
  20         bool
  21
  22 config CPU_ARM720T
  23         bool
  24         select SYS_CACHE_SHIFT_5
  25
  26 config CPU_ARM920T
  27         bool
  28         select SYS_CACHE_SHIFT_5
  29
  30 config CPU_ARM926EJS
  31         bool
  32         select SYS_CACHE_SHIFT_5
  33
  34 config CPU_ARM946ES
  35         bool
  36         select SYS_CACHE_SHIFT_5
  37
  38 config CPU_ARM1136
  39         bool
  40         select SYS_CACHE_SHIFT_5
  41
  42 config CPU_ARM1176
  43         bool
  44         select HAS_VBAR
  45         select SYS_CACHE_SHIFT_5
  46
  47 config CPU_V7
  48         bool
  49         select HAS_VBAR
  50         select HAS_THUMB2
  51         select SYS_CACHE_SHIFT_6
  52
  53 config CPU_V7M
  54         bool
  55         select HAS_THUMB2
  56         select SYS_CACHE_SHIFT_5
  57
  58 config CPU_PXA
  59         bool
  60         select SYS_CACHE_SHIFT_5
  61
  62 config CPU_SA1100
  63         bool
  64         select SYS_CACHE_SHIFT_5
  65
  66 config SYS_CPU
  67         default "arm720t" if CPU_ARM720T
  68         default "arm920t" if CPU_ARM920T
  69         default "arm926ejs" if CPU_ARM926EJS
  70         default "arm946es" if CPU_ARM946ES
  71         default "arm1136" if CPU_ARM1136
  72         default "arm1176" if CPU_ARM1176
  73         default "armv7" if CPU_V7
  74         default "armv7m" if CPU_V7M
  75         default "pxa" if CPU_PXA
  76         default "sa1100" if CPU_SA1100
  77         default "armv8" if ARM64
  78
  79 config SYS_ARM_ARCH
  80         int
  81         default 4 if CPU_ARM720T
  82         default 4 if CPU_ARM920T
  83         default 5 if CPU_ARM926EJS
  84         default 5 if CPU_ARM946ES
  85         default 6 if CPU_ARM1136
  86         default 6 if CPU_ARM1176
  87         default 7 if CPU_V7
  88         default 7 if CPU_V7M
  89         default 5 if CPU_PXA
  90         default 4 if CPU_SA1100
  91         default 8 if ARM64
  92
  93 config SYS_CACHE_SHIFT_5
  94         bool
  95
  96 config SYS_CACHE_SHIFT_6
  97         bool
  98
  99 config SYS_CACHE_SHIFT_7
 100         bool
 101
 102 config SYS_CACHELINE_SIZE
 103         int
 104         default 128 if SYS_CACHE_SHIFT_7
 105         default 64 if SYS_CACHE_SHIFT_6
 106         default 32 if SYS_CACHE_SHIFT_5
 107
 108 config SEMIHOSTING
 109         bool "support boot from semihosting"
 110         help
 111           In emulated environments, semihosting is a way for
 112           the hosted environment to call out to the emulator to
 113           retrieve files from the host machine.
 114
 115 config SYS_L2CACHE_OFF
 116         bool "L2cache off"
 117         help
 118           If SoC does not support L2CACHE or one do not want to enable
 119           L2CACHE, choose this option.
 120
 121 config ENABLE_ARM_SOC_BOOT0_HOOK
 122         bool "prepare BOOT0 header"
 123         help
 124           If the SoC's BOOT0 requires a header area filled with (magic)
 125           values, then choose this option, and create a define called
 126           ARM_SOC_BOOT0_HOOK which contains the required assembler
 127           preprocessor code.
 128
 129 config USE_ARCH_MEMCPY
 130         bool "Use an assembly optimized implementation of memcpy"
 131         default y
 132         depends on !ARM64
 133         help
 134           Enable the generation of an optimized version of memcpy.
 135           Such implementation may be faster under some conditions
 136           but may increase the binary size.
 137
 138 config SPL_USE_ARCH_MEMCPY
 139         bool "Use an assembly optimized implementation of memcpy"
 140         default y if USE_ARCH_MEMCPY
 141         depends on !ARM64
 142         help
 143           Enable the generation of an optimized version of memcpy.
 144           Such implementation may be faster under some conditions
 145           but may increase the binary size.
 146
 147 config USE_ARCH_MEMSET
 148         bool "Use an assembly optimized implementation of memset"
 149         default y
 150         depends on !ARM64
 151         help
 152           Enable the generation of an optimized version of memset.
 153           Such implementation may be faster under some conditions
 154           but may increase the binary size.
 155
 156 config SPL_USE_ARCH_MEMSET
 157         bool "Use an assembly optimized implementation of memset"
 158         default y if USE_ARCH_MEMSET
 159         depends on !ARM64
 160         help
 161           Enable the generation of an optimized version of memset.
 162           Such implementation may be faster under some conditions
 163           but may increase the binary size.
 164
 165 config ARCH_OMAP2
 166         bool
 167         select CPU_V7
 168         select SUPPORT_SPL
 169
 170 config ARM64_SUPPORT_AARCH32
 171         bool "ARM64 system support AArch32 execution state"
 172         default y if ARM64 && !TARGET_THUNDERX_88XX
 173         help
 174           This ARM64 system supports AArch32 execution state.
 175
 176 choice
 177         prompt "Target select"
 178         default TARGET_HIKEY
 179
 180 config ARCH_AT91
 181         bool "Atmel AT91"
 182
 183 config TARGET_EDB93XX
 184         bool "Support edb93xx"
 185         select CPU_ARM920T
 186
 187 config TARGET_ASPENITE
 188         bool "Support aspenite"
 189         select CPU_ARM926EJS
 190
 191 config TARGET_GPLUGD
 192         bool "Support gplugd"
 193         select CPU_ARM926EJS
 194
 195 config ARCH_DAVINCI
 196         bool "TI DaVinci"
 197         select CPU_ARM926EJS
 198         help
 199           Support for TI's DaVinci platform.
 200
 201 config KIRKWOOD
 202         bool "Marvell Kirkwood"
 203         select CPU_ARM926EJS
 204         select BOARD_EARLY_INIT_F
 205         select ARCH_MISC_INIT
 206
 207 config ARCH_MVEBU
 208         bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 209         select OF_CONTROL
 210         select OF_SEPARATE
 211         select DM
 212         select DM_ETH
 213         select DM_SERIAL
 214         select DM_SPI
 215         select DM_SPI_FLASH
 216
 217 config TARGET_DEVKIT3250
 218         bool "Support devkit3250"
 219         select CPU_ARM926EJS
 220         select SUPPORT_SPL
 221
 222 config TARGET_WORK_92105
 223         bool "Support work_92105"
 224         select CPU_ARM926EJS
 225         select SUPPORT_SPL
 226
 227 config TARGET_MX25PDK
 228         bool "Support mx25pdk"
 229         select BOARD_LATE_INIT
 230         select CPU_ARM926EJS
 231         select BOARD_EARLY_INIT_F
 232
 233 config TARGET_ZMX25
 234         bool "Support zmx25"
 235         select BOARD_LATE_INIT
 236         select CPU_ARM926EJS
 237
 238 config TARGET_APF27
 239         bool "Support apf27"
 240         select CPU_ARM926EJS
 241         select SUPPORT_SPL
 242
 243 config TARGET_APX4DEVKIT
 244         bool "Support apx4devkit"
 245         select CPU_ARM926EJS
 246         select SUPPORT_SPL
 247
 248 config TARGET_XFI3
 249         bool "Support xfi3"
 250         select CPU_ARM926EJS
 251         select SUPPORT_SPL
 252
 253 config TARGET_M28EVK
 254         bool "Support m28evk"
 255         select CPU_ARM926EJS
 256         select SUPPORT_SPL
 257
 258 config TARGET_MX23EVK
 259         bool "Support mx23evk"
 260         select CPU_ARM926EJS
 261         select SUPPORT_SPL
 262         select BOARD_EARLY_INIT_F
 263
 264 config TARGET_MX28EVK
 265         bool "Support mx28evk"
 266         select CPU_ARM926EJS
 267         select SUPPORT_SPL
 268         select BOARD_EARLY_INIT_F
 269
 270 config TARGET_MX23_OLINUXINO
 271         bool "Support mx23_olinuxino"
 272         select CPU_ARM926EJS
 273         select SUPPORT_SPL
 274         select BOARD_EARLY_INIT_F
 275
 276 config TARGET_BG0900
 277         bool "Support bg0900"
 278         select CPU_ARM926EJS
 279         select SUPPORT_SPL
 280
 281 config TARGET_SANSA_FUZE_PLUS
 282         bool "Support sansa_fuze_plus"
 283         select CPU_ARM926EJS
 284         select SUPPORT_SPL
 285
 286 config TARGET_SC_SPS_1
 287         bool "Support sc_sps_1"
 288         select CPU_ARM926EJS
 289         select SUPPORT_SPL
 290
 291 config ORION5X
 292         bool "Marvell Orion"
 293         select CPU_ARM926EJS
 294
 295 config TARGET_SPEAR300
 296         bool "Support spear300"
 297         select CPU_ARM926EJS
 298         select BOARD_EARLY_INIT_F
 299
 300 config TARGET_SPEAR310
 301         bool "Support spear310"
 302         select CPU_ARM926EJS
 303         select BOARD_EARLY_INIT_F
 304
 305 config TARGET_SPEAR320
 306         bool "Support spear320"
 307         select CPU_ARM926EJS
 308         select BOARD_EARLY_INIT_F
 309
 310 config TARGET_SPEAR600
 311         bool "Support spear600"
 312         select CPU_ARM926EJS
 313         select BOARD_EARLY_INIT_F
 314
 315 config TARGET_STV0991
 316         bool "Support stv0991"
 317         select CPU_V7
 318         select DM
 319         select DM_SERIAL
 320         select DM_SPI
 321         select DM_SPI_FLASH
 322         select SPI_FLASH
 323
 324 config TARGET_X600
 325         bool "Support x600"
 326         select BOARD_LATE_INIT
 327         select CPU_ARM926EJS
 328         select SUPPORT_SPL
 329
 330 config TARGET_IMX31_PHYCORE
 331         bool "Support imx31_phycore_eet"
 332         select CPU_ARM1136
 333         select BOARD_EARLY_INIT_F
 334
 335 config TARGET_IMX31_PHYCORE_EET
 336         bool "Support imx31_phycore_eet"
 337         select BOARD_LATE_INIT
 338         select CPU_ARM1136
 339         select BOARD_EARLY_INIT_F
 340
 341 config TARGET_MX31ADS
 342         bool "Support mx31ads"
 343         select CPU_ARM1136
 344         select BOARD_EARLY_INIT_F
 345
 346 config TARGET_MX31PDK
 347         bool "Support mx31pdk"
 348         select BOARD_LATE_INIT
 349         select CPU_ARM1136
 350         select SUPPORT_SPL
 351         select BOARD_EARLY_INIT_F
 352
 353 config TARGET_WOODBURN
 354         bool "Support woodburn"
 355         select CPU_ARM1136
 356
 357 config TARGET_WOODBURN_SD
 358         bool "Support woodburn_sd"
 359         select CPU_ARM1136
 360         select SUPPORT_SPL
 361
 362 config TARGET_FLEA3
 363         bool "Support flea3"
 364         select CPU_ARM1136
 365
 366 config TARGET_MX35PDK
 367         bool "Support mx35pdk"
 368         select BOARD_LATE_INIT
 369         select CPU_ARM1136
 370
 371 config ARCH_BCM283X
 372         bool "Broadcom BCM283X family"
 373         select DM
 374         select DM_SERIAL
 375         select DM_GPIO
 376         select OF_CONTROL
 377
 378 config TARGET_VEXPRESS_CA15_TC2
 379         bool "Support vexpress_ca15_tc2"
 380         select CPU_V7
 381         select CPU_V7_HAS_NONSEC
 382         select CPU_V7_HAS_VIRT
 383
 384 config TARGET_VEXPRESS_CA5X2
 385         bool "Support vexpress_ca5x2"
 386         select CPU_V7
 387
 388 config TARGET_VEXPRESS_CA9X4
 389         bool "Support vexpress_ca9x4"
 390         select CPU_V7
 391
 392 config TARGET_BRXRE1
 393         bool "Support BRXRE1"
 394         select ARCH_OMAP2
 395         select BOARD_LATE_INIT
 396
 397 config TARGET_BRPPT1
 398         bool "Support BRPPT1"
 399         select ARCH_OMAP2
 400         select BOARD_LATE_INIT
 401
 402 config TARGET_DRACO
 403         bool "Support draco"
 404         select ARCH_OMAP2
 405         select BOARD_LATE_INIT
 406         select DM
 407         select DM_SERIAL
 408         select DM_GPIO
 409
 410 config TARGET_THUBAN
 411         bool "Support thuban"
 412         select ARCH_OMAP2
 413         select BOARD_LATE_INIT
 414         select DM
 415         select DM_SERIAL
 416         select DM_GPIO
 417
 418 config TARGET_RASTABAN
 419         bool "Support rastaban"
 420         select ARCH_OMAP2
 421         select BOARD_LATE_INIT
 422         select DM
 423         select DM_SERIAL
 424         select DM_GPIO
 425
 426 config TARGET_ETAMIN
 427         bool "Support etamin"
 428         select ARCH_OMAP2
 429         select BOARD_LATE_INIT
 430         select DM
 431         select DM_SERIAL
 432         select DM_GPIO
 433
 434 config TARGET_PXM2
 435         bool "Support pxm2"
 436         select ARCH_OMAP2
 437         select BOARD_LATE_INIT
 438         select DM
 439         select DM_SERIAL
 440         select DM_GPIO
 441
 442 config TARGET_RUT
 443         bool "Support rut"
 444         select ARCH_OMAP2
 445         select BOARD_LATE_INIT
 446         select DM
 447         select DM_SERIAL
 448         select DM_GPIO
 449
 450 config TARGET_TI814X_EVM
 451         bool "Support ti814x_evm"
 452         select ARCH_OMAP2
 453
 454 config TARGET_TI816X_EVM
 455         bool "Support ti816x_evm"
 456         select ARCH_OMAP2
 457
 458 config TARGET_BCM23550_W1D
 459         bool "Support bcm23550_w1d"
 460         select CPU_V7
 461
 462 config TARGET_BCM28155_AP
 463         bool "Support bcm28155_ap"
 464         select CPU_V7
 465
 466 config TARGET_BCMCYGNUS
 467         bool "Support bcmcygnus"
 468         select CPU_V7
 469
 470 config TARGET_BCMNSP
 471         bool "Support bcmnsp"
 472         select CPU_V7
 473
 474 config ARCH_EXYNOS
 475         bool "Samsung EXYNOS"
 476         select DM
 477         select DM_I2C
 478         select DM_SPI_FLASH
 479         select DM_SERIAL
 480         select DM_SPI
 481         select DM_GPIO
 482         select DM_KEYBOARD
 483
 484 config ARCH_S5PC1XX
 485         bool "Samsung S5PC1XX"
 486         select CPU_V7
 487         select DM
 488         select DM_SERIAL
 489         select DM_GPIO
 490         select DM_I2C
 491
 492 config ARCH_HIGHBANK
 493         bool "Calxeda Highbank"
 494         select CPU_V7
 495
 496 config ARCH_INTEGRATOR
 497         bool "ARM Ltd. Integrator family"
 498         select DM
 499         select DM_SERIAL
 500
 501 config ARCH_KEYSTONE
 502         bool "TI Keystone"
 503         select CPU_V7
 504         select SUPPORT_SPL
 505         select CMD_POWEROFF
 506
 507 config ARCH_MESON
 508         bool "Amlogic Meson"
 509         help
 510           Support for the Meson SoC family developed by Amlogic Inc.,
 511           targeted at media players and tablet computers. We currently
 512           support the S905 (GXBaby) 64-bit SoC.
 513
 514 config ARCH_MX7
 515         bool "Freescale MX7"
 516         select CPU_V7
 517         select SYS_FSL_HAS_SEC if SECURE_BOOT
 518         select SYS_FSL_SEC_COMPAT_4
 519         select SYS_FSL_SEC_LE
 520         select BOARD_EARLY_INIT_F
 521         select ARCH_MISC_INIT
 522
 523 config ARCH_MX6
 524         bool "Freescale MX6"
 525         select CPU_V7
 526         select SYS_FSL_HAS_SEC if SECURE_BOOT
 527         select SYS_FSL_SEC_COMPAT_4
 528         select SYS_FSL_SEC_LE
 529
 530 config ARCH_MX5
 531         bool "Freescale MX5"
 532         select CPU_V7
 533         select BOARD_EARLY_INIT_F
 534
 535 config TARGET_M53EVK
 536         bool "Support m53evk"
 537         select CPU_V7
 538         select SUPPORT_SPL
 539         select BOARD_EARLY_INIT_F
 540
 541 config TARGET_MX51EVK
 542         bool "Support mx51evk"
 543         select BOARD_LATE_INIT
 544         select CPU_V7
 545         select BOARD_EARLY_INIT_F
 546
 547 config TARGET_MX53ARD
 548         bool "Support mx53ard"
 549         select CPU_V7
 550         select BOARD_EARLY_INIT_F
 551
 552 config TARGET_MX53EVK
 553         bool "Support mx53evk"
 554         select BOARD_LATE_INIT
 555         select CPU_V7
 556         select BOARD_EARLY_INIT_F
 557
 558 config TARGET_MX53LOCO
 559         bool "Support mx53loco"
 560         select BOARD_LATE_INIT
 561         select CPU_V7
 562         select BOARD_EARLY_INIT_F
 563
 564 config TARGET_MX53SMD
 565         bool "Support mx53smd"
 566         select CPU_V7
 567         select BOARD_EARLY_INIT_F
 568
 569 config OMAP34XX
 570         bool "OMAP34XX SoC"
 571         select ARCH_OMAP2
 572         select USE_TINY_PRINTF
 573         imply SPL_EXT_SUPPORT
 574         imply SPL_FAT_SUPPORT
 575         imply SPL_GPIO_SUPPORT
 576         imply SPL_I2C_SUPPORT
 577         imply SPL_LIBCOMMON_SUPPORT
 578         imply SPL_LIBDISK_SUPPORT
 579         imply SPL_LIBGENERIC_SUPPORT
 580         imply SPL_MMC_SUPPORT
 581         imply SPL_NAND_SUPPORT
 582         imply SPL_POWER_SUPPORT
 583         imply SPL_SERIAL_SUPPORT
 584
 585 config OMAP44XX
 586         bool "OMAP44XX SoC"
 587         select ARCH_OMAP2
 588         select USE_TINY_PRINTF
 589
 590 config OMAP54XX
 591         bool "OMAP54XX SoC"
 592         select ARCH_OMAP2
 593         imply SPL_DISPLAY_PRINT
 594         imply SPL_ENV_SUPPORT
 595         imply SPL_EXT_SUPPORT
 596         imply SPL_FAT_SUPPORT
 597         imply SPL_GPIO_SUPPORT
 598         imply SPL_I2C_SUPPORT
 599         imply SPL_LIBCOMMON_SUPPORT
 600         imply SPL_LIBDISK_SUPPORT
 601         imply SPL_LIBGENERIC_SUPPORT
 602         imply SPL_MMC_SUPPORT
 603         imply SPL_NAND_SUPPORT
 604         imply SPL_POWER_SUPPORT
 605         imply SPL_SERIAL_SUPPORT
 606
 607 config AM43XX
 608         bool "AM43XX SoC"
 609         select ARCH_OMAP2
 610         help
 611           Support for AM43xx SOC from Texas Instruments.
 612           The AM43xx high performance SOC features a Cortex-A9
 613           ARM core, a quad core PRU-ICSS for industrial Ethernet
 614           protocols, dual camera support, optional 3D graphics
 615           and an optional customer programmable secure boot.
 616
 617 config AM33XX
 618         bool "AM33XX SoC"
 619         select ARCH_OMAP2
 620         help
 621           Support for AM335x SOC from Texas Instruments.
 622           The AM335x high performance SOC features a Cortex-A8
 623           ARM core, a dual core PRU-ICSS for industrial Ethernet
 624           protocols, optional 3D graphics and an optional customer
 625           programmable secure boot.
 626
 627 config ARCH_RMOBILE
 628         bool "Renesas ARM SoCs"
 629         select DM
 630         select DM_SERIAL
 631         select BOARD_EARLY_INIT_F
 632
 633 config TARGET_S32V234EVB
 634         bool "Support s32v234evb"
 635         select ARM64
 636         select SYS_FSL_ERRATUM_ESDHC111
 637
 638 config ARCH_SNAPDRAGON
 639         bool "Qualcomm Snapdragon SoCs"
 640         select ARM64
 641         select DM
 642         select DM_GPIO
 643         select DM_SERIAL
 644         select SPMI
 645         select OF_CONTROL
 646         select OF_SEPARATE
 647
 648 config ARCH_SOCFPGA
 649         bool "Altera SOCFPGA family"
 650         select CPU_V7
 651         select SUPPORT_SPL
 652         select OF_CONTROL
 653         select SPL_OF_CONTROL
 654         select DM
 655         select DM_SPI_FLASH
 656         select DM_SPI
 657         select ENABLE_ARM_SOC_BOOT0_HOOK
 658         select ARCH_EARLY_INIT_R
 659         select ARCH_MISC_INIT
 660         select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 661
 662 config TARGET_CM_T43
 663         bool "Support cm_t43"
 664         select ARCH_OMAP2
 665
 666 config ARCH_SUNXI
 667         bool "Support sunxi (Allwinner) SoCs"
 668         select CMD_GPIO
 669         select CMD_MMC if MMC
 670         select CMD_USB if DISTRO_DEFAULTS
 671         select DM
 672         select DM_ETH
 673         select DM_GPIO
 674         select DM_KEYBOARD
 675         select DM_SERIAL
 676         select DM_USB if DISTRO_DEFAULTS
 677         select OF_BOARD_SETUP
 678         select OF_CONTROL
 679         select OF_SEPARATE
 680         select SPL_STACK_R if SUPPORT_SPL
 681         select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
 682         select SYS_NS16550
 683         select USB if DISTRO_DEFAULTS
 684         select USB_STORAGE if DISTRO_DEFAULTS
 685         select USB_KEYBOARD if DISTRO_DEFAULTS
 686         select USE_TINY_PRINTF
 687
 688 config TARGET_TS4600
 689         bool "Support TS4600"
 690         select CPU_ARM926EJS
 691         select SUPPORT_SPL
 692
 693 config TARGET_TS4800
 694         bool "Support TS4800"
 695         select CPU_V7
 696         select SYS_FSL_ERRATUM_ESDHC_A001
 697
 698 config TARGET_VF610TWR
 699         bool "Support vf610twr"
 700         select CPU_V7
 701         select SYS_FSL_ERRATUM_ESDHC111
 702
 703 config TARGET_COLIBRI_VF
 704         bool "Support Colibri VF50/61"
 705         select BOARD_LATE_INIT
 706         select CPU_V7
 707         select SYS_FSL_ERRATUM_ESDHC111
 708
 709 config TARGET_PCM052
 710         bool "Support pcm-052"
 711         select CPU_V7
 712         select SYS_FSL_ERRATUM_ESDHC111
 713         select SYS_FSL_ERRATUM_ESDHC135
 714         select SYS_FSL_ERRATUM_ESDHC_A001
 715
 716 config TARGET_BK4R1
 717         bool "Support BK4r1"
 718         select CPU_V7
 719         select SYS_FSL_ERRATUM_ESDHC111
 720         select SYS_FSL_ERRATUM_ESDHC135
 721         select SYS_FSL_ERRATUM_ESDHC_A001
 722
 723 config ARCH_ZYNQ
 724         bool "Xilinx Zynq Platform"
 725         select BOARD_LATE_INIT
 726         select CPU_V7
 727         select SUPPORT_SPL
 728         select OF_CONTROL
 729         select SPL_OF_CONTROL if SPL
 730         select DM
 731         select DM_ETH
 732         select DM_GPIO
 733         select SPL_DM if SPL
 734         select DM_MMC
 735         select DM_MMC_OPS
 736         select DM_SPI
 737         select DM_SERIAL
 738         select DM_SPI_FLASH
 739         select SPL_SEPARATE_BSS if SPL
 740         select DM_USB if USB
 741         select BLK
 742
 743 config ARCH_ZYNQMP
 744         bool "Support Xilinx ZynqMP Platform"
 745         select ARM64
 746         select BOARD_LATE_INIT
 747         select DM
 748         select OF_CONTROL
 749         select DM_SERIAL
 750         select SUPPORT_SPL
 751         select CLK
 752         select SPL_CLK
 753         select DM_USB if USB
 754
 755 config TEGRA
 756         bool "NVIDIA Tegra"
 757
 758 config TARGET_VEXPRESS64_AEMV8A
 759         bool "Support vexpress_aemv8a"
 760         select ARM64
 761
 762 config TARGET_VEXPRESS64_BASE_FVP
 763         bool "Support Versatile Express ARMv8a FVP BASE model"
 764         select ARM64
 765         select SEMIHOSTING
 766
 767 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 768         bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 769         select ARM64
 770         help
 771           This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 772           the default config to allow the user to load the images directly into
 773           DRAM using model parameters rather than by using semi-hosting to load
 774           the files from the host filesystem.
 775
 776 config TARGET_VEXPRESS64_JUNO
 777         bool "Support Versatile Express Juno Development Platform"
 778         select ARM64
 779
 780 config TARGET_LS2080A_EMU
 781         bool "Support ls2080a_emu"
 782         select ARCH_LS2080A
 783         select ARM64
 784         select ARMV8_MULTIENTRY
 785         select ARCH_MISC_INIT
 786         help
 787           Support for Freescale LS2080A_EMU platform
 788           The LS2080A Development System (EMULATOR) is a pre silicon
 789           development platform that supports the QorIQ LS2080A
 790           Layerscape Architecture processor.
 791
 792 config TARGET_LS2080A_SIMU
 793         bool "Support ls2080a_simu"
 794         select ARCH_LS2080A
 795         select ARM64
 796         select ARMV8_MULTIENTRY
 797         select ARCH_MISC_INIT
 798         help
 799           Support for Freescale LS2080A_SIMU platform
 800           The LS2080A Development System (QDS) is a pre silicon
 801           development platform that supports the QorIQ LS2080A
 802           Layerscape Architecture processor.
 803
 804 config TARGET_LS2080AQDS
 805         bool "Support ls2080aqds"
 806         select ARCH_LS2080A
 807         select ARM64
 808         select ARMV8_MULTIENTRY
 809         select BOARD_LATE_INIT
 810         select SUPPORT_SPL
 811         select ARCH_MISC_INIT
 812         help
 813           Support for Freescale LS2080AQDS platform
 814           The LS2080A Development System (QDS) is a high-performance
 815           development platform that supports the QorIQ LS2080A
 816           Layerscape Architecture processor.
 817
 818 config TARGET_LS2080ARDB
 819         bool "Support ls2080ardb"
 820         select ARCH_LS2080A
 821         select ARM64
 822         select ARMV8_MULTIENTRY
 823         select BOARD_LATE_INIT
 824         select SUPPORT_SPL
 825         select ARCH_MISC_INIT
 826         help
 827           Support for Freescale LS2080ARDB platform.
 828           The LS2080A Reference design board (RDB) is a high-performance
 829           development platform that supports the QorIQ LS2080A
 830           Layerscape Architecture processor.
 831
 832 config TARGET_HIKEY
 833         bool "Support HiKey 96boards Consumer Edition Platform"
 834         select ARM64
 835         select DM
 836         select DM_GPIO
 837         select DM_SERIAL
 838         select OF_CONTROL
 839           help
 840           Support for HiKey 96boards platform. It features a HI6220
 841           SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 842
 843 config TARGET_LS1012AQDS
 844         bool "Support ls1012aqds"
 845         select ARCH_LS1012A
 846         select ARM64
 847         select BOARD_LATE_INIT
 848         help
 849           Support for Freescale LS1012AQDS platform.
 850           The LS1012A Development System (QDS) is a high-performance
 851           development platform that supports the QorIQ LS1012A
 852           Layerscape Architecture processor.
 853
 854 config TARGET_LS1012ARDB
 855         bool "Support ls1012ardb"
 856         select ARCH_LS1012A
 857         select ARM64
 858         select BOARD_LATE_INIT
 859         help
 860           Support for Freescale LS1012ARDB platform.
 861           The LS1012A Reference design board (RDB) is a high-performance
 862           development platform that supports the QorIQ LS1012A
 863           Layerscape Architecture processor.
 864
 865 config TARGET_LS1012AFRDM
 866         bool "Support ls1012afrdm"
 867         select ARCH_LS1012A
 868         select ARM64
 869         help
 870           Support for Freescale LS1012AFRDM platform.
 871           The LS1012A Freedom  board (FRDM) is a high-performance
 872           development platform that supports the QorIQ LS1012A
 873           Layerscape Architecture processor.
 874
 875 config TARGET_LS1021AQDS
 876         bool "Support ls1021aqds"
 877         select BOARD_LATE_INIT
 878         select CPU_V7
 879         select CPU_V7_HAS_NONSEC
 880         select CPU_V7_HAS_VIRT
 881         select SUPPORT_SPL
 882         select ARCH_LS1021A
 883         select ARCH_SUPPORT_PSCI
 884         select LS1_DEEP_SLEEP
 885         select SYS_FSL_DDR
 886         select BOARD_EARLY_INIT_F
 887
 888 config TARGET_LS1021ATWR
 889         bool "Support ls1021atwr"
 890         select BOARD_LATE_INIT
 891         select CPU_V7
 892         select CPU_V7_HAS_NONSEC
 893         select CPU_V7_HAS_VIRT
 894         select SUPPORT_SPL
 895         select ARCH_LS1021A
 896         select ARCH_SUPPORT_PSCI
 897         select LS1_DEEP_SLEEP
 898         select BOARD_EARLY_INIT_F
 899
 900 config TARGET_LS1021AIOT
 901         bool "Support ls1021aiot"
 902         select BOARD_LATE_INIT
 903         select CPU_V7
 904         select CPU_V7_HAS_NONSEC
 905         select CPU_V7_HAS_VIRT
 906         select SUPPORT_SPL
 907         select ARCH_LS1021A
 908         select ARCH_SUPPORT_PSCI
 909         help
 910           Support for Freescale LS1021AIOT platform.
 911           The LS1021A Freescale board (IOT) is a high-performance
 912           development platform that supports the QorIQ LS1021A
 913           Layerscape Architecture processor.
 914
 915 config TARGET_LS1043AQDS
 916         bool "Support ls1043aqds"
 917         select ARCH_LS1043A
 918         select ARM64
 919         select ARMV8_MULTIENTRY
 920         select BOARD_LATE_INIT
 921         select SUPPORT_SPL
 922         select BOARD_EARLY_INIT_F
 923         help
 924           Support for Freescale LS1043AQDS platform.
 925
 926 config TARGET_LS1043ARDB
 927         bool "Support ls1043ardb"
 928         select ARCH_LS1043A
 929         select ARM64
 930         select ARMV8_MULTIENTRY
 931         select BOARD_LATE_INIT
 932         select SUPPORT_SPL
 933         select BOARD_EARLY_INIT_F
 934         help
 935           Support for Freescale LS1043ARDB platform.
 936
 937 config TARGET_LS1046AQDS
 938         bool "Support ls1046aqds"
 939         select ARCH_LS1046A
 940         select ARM64
 941         select ARMV8_MULTIENTRY
 942         select BOARD_LATE_INIT
 943         select SUPPORT_SPL
 944         select DM_SPI_FLASH if DM_SPI
 945         select BOARD_EARLY_INIT_F
 946         help
 947           Support for Freescale LS1046AQDS platform.
 948           The LS1046A Development System (QDS) is a high-performance
 949           development platform that supports the QorIQ LS1046A
 950           Layerscape Architecture processor.
 951
 952 config TARGET_LS1046ARDB
 953         bool "Support ls1046ardb"
 954         select ARCH_LS1046A
 955         select ARM64
 956         select ARMV8_MULTIENTRY
 957         select BOARD_LATE_INIT
 958         select SUPPORT_SPL
 959         select DM_SPI_FLASH if DM_SPI
 960         select POWER_MC34VR500
 961         select BOARD_EARLY_INIT_F
 962         help
 963           Support for Freescale LS1046ARDB platform.
 964           The LS1046A Reference Design Board (RDB) is a high-performance
 965           development platform that supports the QorIQ LS1046A
 966           Layerscape Architecture processor.
 967
 968 config TARGET_H2200
 969         bool "Support h2200"
 970         select CPU_PXA
 971
 972 config TARGET_ZIPITZ2
 973         bool "Support zipitz2"
 974         select CPU_PXA
 975
 976 config TARGET_COLIBRI_PXA270
 977         bool "Support colibri_pxa270"
 978         select CPU_PXA
 979
 980 config ARCH_UNIPHIER
 981         bool "Socionext UniPhier SoCs"
 982         select BOARD_LATE_INIT
 983         select CLK_UNIPHIER
 984         select DM
 985         select DM_GPIO
 986         select DM_I2C
 987         select DM_MMC
 988         select DM_RESET
 989         select DM_SERIAL
 990         select DM_USB
 991         select OF_CONTROL
 992         select OF_LIBFDT
 993         select PINCTRL
 994         select SPL_DM if SPL
 995         select SPL_LIBCOMMON_SUPPORT if SPL
 996         select SPL_LIBGENERIC_SUPPORT if SPL
 997         select SPL_OF_CONTROL if SPL
 998         select SPL_PINCTRL if SPL
 999         select SUPPORT_SPL
1000         help
1001           Support for UniPhier SoC family developed by Socionext Inc.
1002           (formerly, System LSI Business Division of Panasonic Corporation)
1003
1004 config STM32
1005         bool "Support STM32"
1006         select CPU_V7M
1007         select DM
1008         select DM_SERIAL
1009
1010 config ARCH_ROCKCHIP
1011         bool "Support Rockchip SoCs"
1012         select OF_CONTROL
1013         select BLK
1014         select DM
1015         select SPL_DM if SPL
1016         select SYS_MALLOC_F
1017         select SPL_SYS_MALLOC_SIMPLE if SPL
1018         select DM_GPIO
1019         select DM_I2C
1020         select DM_MMC
1021         select DM_MMC_OPS
1022         select DM_SERIAL
1023         select DM_SPI
1024         select DM_SPI_FLASH
1025         select DM_USB if USB
1026         select DM_PWM
1027         select DM_REGULATOR
1028
1029 config TARGET_THUNDERX_88XX
1030         bool "Support ThunderX 88xx"
1031         select ARM64
1032         select OF_CONTROL
1033         select SYS_CACHE_SHIFT_7
1034
1035 config ARCH_ASPEED
1036         bool "Support Aspeed SoCs"
1037         select OF_CONTROL
1038         select DM
1039
1040 endchoice
1041
1042 source "arch/arm/mach-aspeed/Kconfig"
1043
1044 source "arch/arm/mach-at91/Kconfig"
1045
1046 source "arch/arm/mach-bcm283x/Kconfig"
1047
1048 source "arch/arm/mach-davinci/Kconfig"
1049
1050 source "arch/arm/mach-exynos/Kconfig"
1051
1052 source "arch/arm/mach-highbank/Kconfig"
1053
1054 source "arch/arm/mach-integrator/Kconfig"
1055
1056 source "arch/arm/mach-keystone/Kconfig"
1057
1058 source "arch/arm/mach-kirkwood/Kconfig"
1059
1060 source "arch/arm/mach-mvebu/Kconfig"
1061
1062 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1063
1064 source "arch/arm/cpu/armv7/mx7/Kconfig"
1065
1066 source "arch/arm/cpu/armv7/mx6/Kconfig"
1067
1068 source "arch/arm/cpu/armv7/mx5/Kconfig"
1069
1070 source "arch/arm/mach-omap2/Kconfig"
1071
1072 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1073
1074 source "arch/arm/mach-orion5x/Kconfig"
1075
1076 source "arch/arm/mach-rmobile/Kconfig"
1077
1078 source "arch/arm/mach-meson/Kconfig"
1079
1080 source "arch/arm/mach-rockchip/Kconfig"
1081
1082 source "arch/arm/mach-s5pc1xx/Kconfig"
1083
1084 source "arch/arm/mach-snapdragon/Kconfig"
1085
1086 source "arch/arm/mach-socfpga/Kconfig"
1087
1088 source "arch/arm/mach-stm32/Kconfig"
1089
1090 source "arch/arm/mach-tegra/Kconfig"
1091
1092 source "arch/arm/mach-uniphier/Kconfig"
1093
1094 source "arch/arm/mach-zynq/Kconfig"
1095
1096 source "arch/arm/cpu/armv7/Kconfig"
1097
1098 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1099
1100 source "arch/arm/cpu/armv8/Kconfig"
1101
1102 source "arch/arm/imx-common/Kconfig"
1103
1104 source "board/bosch/shc/Kconfig"
1105 source "board/BuR/brxre1/Kconfig"
1106 source "board/BuR/brppt1/Kconfig"
1107 source "board/CarMediaLab/flea3/Kconfig"
1108 source "board/Marvell/aspenite/Kconfig"
1109 source "board/Marvell/gplugd/Kconfig"
1110 source "board/armadeus/apf27/Kconfig"
1111 source "board/armltd/vexpress/Kconfig"
1112 source "board/armltd/vexpress64/Kconfig"
1113 source "board/bluegiga/apx4devkit/Kconfig"
1114 source "board/broadcom/bcm23550_w1d/Kconfig"
1115 source "board/broadcom/bcm28155_ap/Kconfig"
1116 source "board/broadcom/bcmcygnus/Kconfig"
1117 source "board/broadcom/bcmnsp/Kconfig"
1118 source "board/cavium/thunderx/Kconfig"
1119 source "board/cirrus/edb93xx/Kconfig"
1120 source "board/compulab/cm_t335/Kconfig"
1121 source "board/compulab/cm_t43/Kconfig"
1122 source "board/creative/xfi3/Kconfig"
1123 source "board/denx/m28evk/Kconfig"
1124 source "board/denx/m53evk/Kconfig"
1125 source "board/freescale/ls2080a/Kconfig"
1126 source "board/freescale/ls2080aqds/Kconfig"
1127 source "board/freescale/ls2080ardb/Kconfig"
1128 source "board/freescale/ls1021aqds/Kconfig"
1129 source "board/freescale/ls1043aqds/Kconfig"
1130 source "board/freescale/ls1021atwr/Kconfig"
1131 source "board/freescale/ls1021aiot/Kconfig"
1132 source "board/freescale/ls1046aqds/Kconfig"
1133 source "board/freescale/ls1043ardb/Kconfig"
1134 source "board/freescale/ls1046ardb/Kconfig"
1135 source "board/freescale/ls1012aqds/Kconfig"
1136 source "board/freescale/ls1012ardb/Kconfig"
1137 source "board/freescale/ls1012afrdm/Kconfig"
1138 source "board/freescale/mx23evk/Kconfig"
1139 source "board/freescale/mx25pdk/Kconfig"
1140 source "board/freescale/mx28evk/Kconfig"
1141 source "board/freescale/mx31ads/Kconfig"
1142 source "board/freescale/mx31pdk/Kconfig"
1143 source "board/freescale/mx35pdk/Kconfig"
1144 source "board/freescale/mx51evk/Kconfig"
1145 source "board/freescale/mx53ard/Kconfig"
1146 source "board/freescale/mx53evk/Kconfig"
1147 source "board/freescale/mx53loco/Kconfig"
1148 source "board/freescale/mx53smd/Kconfig"
1149 source "board/freescale/s32v234evb/Kconfig"
1150 source "board/freescale/vf610twr/Kconfig"
1151 source "board/grinn/chiliboard/Kconfig"
1152 source "board/gumstix/pepper/Kconfig"
1153 source "board/h2200/Kconfig"
1154 source "board/hisilicon/hikey/Kconfig"
1155 source "board/imx31_phycore/Kconfig"
1156 source "board/isee/igep0033/Kconfig"
1157 source "board/olimex/mx23_olinuxino/Kconfig"
1158 source "board/phytec/pcm051/Kconfig"
1159 source "board/phytec/pcm052/Kconfig"
1160 source "board/ppcag/bg0900/Kconfig"
1161 source "board/sandisk/sansa_fuze_plus/Kconfig"
1162 source "board/schulercontrol/sc_sps_1/Kconfig"
1163 source "board/siemens/draco/Kconfig"
1164 source "board/siemens/pxm2/Kconfig"
1165 source "board/siemens/rut/Kconfig"
1166 source "board/silica/pengwyn/Kconfig"
1167 source "board/spear/spear300/Kconfig"
1168 source "board/spear/spear310/Kconfig"
1169 source "board/spear/spear320/Kconfig"
1170 source "board/spear/spear600/Kconfig"
1171 source "board/spear/x600/Kconfig"
1172 source "board/st/stv0991/Kconfig"
1173 source "board/sunxi/Kconfig"
1174 source "board/syteco/zmx25/Kconfig"
1175 source "board/tcl/sl50/Kconfig"
1176 source "board/ti/am335x/Kconfig"
1177 source "board/ti/am43xx/Kconfig"
1178 source "board/birdland/bav335x/Kconfig"
1179 source "board/ti/ti814x/Kconfig"
1180 source "board/ti/ti816x/Kconfig"
1181 source "board/timll/devkit3250/Kconfig"
1182 source "board/toradex/colibri_pxa270/Kconfig"
1183 source "board/toradex/colibri_vf/Kconfig"
1184 source "board/technologic/ts4600/Kconfig"
1185 source "board/technologic/ts4800/Kconfig"
1186 source "board/vscom/baltos/Kconfig"
1187 source "board/woodburn/Kconfig"
1188 source "board/work-microwave/work_92105/Kconfig"
1189 source "board/zipitz2/Kconfig"
1190
1191 source "arch/arm/Kconfig.debug"
1192
1193 endmenu