arch/arm/Kconfig

   1 menu "ARM architecture"
   2         depends on ARM
   3
   4 config SYS_ARCH
   5         default "arm"
   6
   7 config ARM64
   8         bool
   9         select PHYS_64BIT
  10         select SYS_CACHE_SHIFT_6
  11
  12 if ARM64
  13 config POSITION_INDEPENDENT
  14         bool "Generate position-independent pre-relocation code"
  15         help
  16           U-Boot expects to be linked to a specific hard-coded address, and to
  17           be loaded to and run from that address. This option lifts that
  18           restriction, thus allowing the code to be loaded to and executed
  19           from almost any address. This logic relies on the relocation
  20           information that is embedded into the binary to support U-Boot
  21           relocating itself to the top-of-RAM later during execution.
  22
  23 config SYS_INIT_SP_BSS_OFFSET
  24         int
  25         help
  26           U-Boot typically uses a hard-coded value for the stack pointer
  27           before relocation. Define this option to instead calculate the
  28           initial SP at run-time. This is useful to avoid hard-coding addresses
  29           into U-Boot, so that can be loaded and executed at arbitrary
  30           addresses and thus avoid using arbitrary addresses at runtime. This
  31           option's value is the offset added to &_bss_start in order to
  32           calculate the stack pointer. This offset should be large enough so
  33           that the early malloc region, global data (gd), and early stack usage
  34           do not overlap any appended DTB.
  35
  36 config LINUX_KERNEL_IMAGE_HEADER
  37         bool
  38         help
  39           Place a Linux kernel image header at the start of the U-Boot binary.
  40           The format of the header is described in the Linux kernel source at
  41           Documentation/arm64/booting.txt. This feature is useful since the
  42           image header reports the amount of memory (BSS and similar) that
  43           U-Boot needs to use, but which isn't part of the binary.
  44
  45 if LINUX_KERNEL_IMAGE_HEADER
  46 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
  47         hex
  48         help
  49           The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
  50           TEXT_OFFSET value written in to the Linux kernel image header.
  51 endif
  52 endif
  53
  54 config STATIC_RELA
  55         bool
  56         default y if ARM64 && !POSITION_INDEPENDENT
  57
  58 config DMA_ADDR_T_64BIT
  59         bool
  60         default y if ARM64
  61
  62 config HAS_VBAR
  63         bool
  64
  65 config HAS_THUMB2
  66         bool
  67
  68 # Used for compatibility with asm files copied from the kernel
  69 config ARM_ASM_UNIFIED
  70         bool
  71         default y
  72
  73 # Used for compatibility with asm files copied from the kernel
  74 config THUMB2_KERNEL
  75         bool
  76
  77 # If set, the workarounds for these ARM errata are applied early during U-Boot
  78 # startup. Note that in general these options force the workarounds to be
  79 # applied; no CPU-type/version detection exists, unlike the similar options in
  80 # the Linux kernel. Do not set these options unless they apply!  Also note that
  81 # the following can be machine specific errata. These do have ability to
  82 # provide rudimentary version and machine specific checks, but expect no
  83 # product checks:
  84 # CONFIG_ARM_ERRATA_430973
  85 # CONFIG_ARM_ERRATA_454179
  86 # CONFIG_ARM_ERRATA_621766
  87 # CONFIG_ARM_ERRATA_798870
  88 # CONFIG_ARM_ERRATA_801819
  89 config ARM_ERRATA_430973
  90         bool
  91
  92 config ARM_ERRATA_454179
  93         bool
  94
  95 config ARM_ERRATA_621766
  96         bool
  97
  98 config ARM_ERRATA_716044
  99         bool
 100
 101 config ARM_ERRATA_725233
 102         bool
 103
 104 config ARM_ERRATA_742230
 105         bool
 106
 107 config ARM_ERRATA_743622
 108         bool
 109
 110 config ARM_ERRATA_751472
 111         bool
 112
 113 config ARM_ERRATA_761320
 114         bool
 115
 116 config ARM_ERRATA_773022
 117         bool
 118
 119 config ARM_ERRATA_774769
 120         bool
 121
 122 config ARM_ERRATA_794072
 123         bool
 124
 125 config ARM_ERRATA_798870
 126         bool
 127
 128 config ARM_ERRATA_801819
 129         bool
 130
 131 config ARM_ERRATA_826974
 132         bool
 133
 134 config ARM_ERRATA_828024
 135         bool
 136
 137 config ARM_ERRATA_829520
 138         bool
 139
 140 config ARM_ERRATA_833069
 141         bool
 142
 143 config ARM_ERRATA_833471
 144         bool
 145
 146 config ARM_ERRATA_845369
 147        bool
 148
 149 config ARM_ERRATA_852421
 150         bool
 151
 152 config ARM_ERRATA_852423
 153         bool
 154
 155 config ARM_ERRATA_855873
 156         bool
 157
 158 config CPU_ARM720T
 159         bool
 160         select SYS_CACHE_SHIFT_5
 161
 162 config CPU_ARM920T
 163         bool
 164         select SYS_CACHE_SHIFT_5
 165
 166 config CPU_ARM926EJS
 167         bool
 168         select SYS_CACHE_SHIFT_5
 169
 170 config CPU_ARM946ES
 171         bool
 172         select SYS_CACHE_SHIFT_5
 173
 174 config CPU_ARM1136
 175         bool
 176         select SYS_CACHE_SHIFT_5
 177
 178 config CPU_ARM1176
 179         bool
 180         select HAS_VBAR
 181         select SYS_CACHE_SHIFT_5
 182
 183 config CPU_V7
 184         bool
 185         select HAS_VBAR
 186         select HAS_THUMB2
 187         select SYS_CACHE_SHIFT_6
 188
 189 config CPU_V7M
 190         bool
 191         select HAS_THUMB2
 192         select THUMB2_KERNEL
 193         select SYS_CACHE_SHIFT_5
 194
 195 config CPU_PXA
 196         bool
 197         select SYS_CACHE_SHIFT_5
 198
 199 config CPU_SA1100
 200         bool
 201         select SYS_CACHE_SHIFT_5
 202
 203 config SYS_CPU
 204         default "arm720t" if CPU_ARM720T
 205         default "arm920t" if CPU_ARM920T
 206         default "arm926ejs" if CPU_ARM926EJS
 207         default "arm946es" if CPU_ARM946ES
 208         default "arm1136" if CPU_ARM1136
 209         default "arm1176" if CPU_ARM1176
 210         default "armv7" if CPU_V7
 211         default "armv7m" if CPU_V7M
 212         default "pxa" if CPU_PXA
 213         default "sa1100" if CPU_SA1100
 214         default "armv8" if ARM64
 215
 216 config SYS_ARM_ARCH
 217         int
 218         default 4 if CPU_ARM720T
 219         default 4 if CPU_ARM920T
 220         default 5 if CPU_ARM926EJS
 221         default 5 if CPU_ARM946ES
 222         default 6 if CPU_ARM1136
 223         default 6 if CPU_ARM1176
 224         default 7 if CPU_V7
 225         default 7 if CPU_V7M
 226         default 5 if CPU_PXA
 227         default 4 if CPU_SA1100
 228         default 8 if ARM64
 229
 230 config SYS_CACHE_SHIFT_5
 231         bool
 232
 233 config SYS_CACHE_SHIFT_6
 234         bool
 235
 236 config SYS_CACHE_SHIFT_7
 237         bool
 238
 239 config SYS_CACHELINE_SIZE
 240         int
 241         default 128 if SYS_CACHE_SHIFT_7
 242         default 64 if SYS_CACHE_SHIFT_6
 243         default 32 if SYS_CACHE_SHIFT_5
 244
 245 config ARM_SMCCC
 246         bool "Support for ARM SMC Calling Convention (SMCCC)"
 247         depends on CPU_V7 || ARM64
 248         select ARM_PSCI_FW
 249         help
 250           Say Y here if you want to enable ARM SMC Calling Convention.
 251           This should be enabled if U-Boot needs to communicate with system
 252           firmware (for example, PSCI) according to SMCCC.
 253
 254 config SEMIHOSTING
 255         bool "support boot from semihosting"
 256         help
 257           In emulated environments, semihosting is a way for
 258           the hosted environment to call out to the emulator to
 259           retrieve files from the host machine.
 260
 261 config SYS_THUMB_BUILD
 262         bool "Build U-Boot using the Thumb instruction set"
 263         depends on !ARM64
 264         help
 265            Use this flag to build U-Boot using the Thumb instruction set for
 266            ARM architectures. Thumb instruction set provides better code
 267            density. For ARM architectures that support Thumb2 this flag will
 268            result in Thumb2 code generated by GCC.
 269
 270 config SPL_SYS_THUMB_BUILD
 271         bool "Build SPL using the Thumb instruction set"
 272         default y if SYS_THUMB_BUILD
 273         depends on !ARM64
 274         help
 275            Use this flag to build SPL using the Thumb instruction set for
 276            ARM architectures. Thumb instruction set provides better code
 277            density. For ARM architectures that support Thumb2 this flag will
 278            result in Thumb2 code generated by GCC.
 279
 280 config SYS_L2CACHE_OFF
 281         bool "L2cache off"
 282         help
 283           If SoC does not support L2CACHE or one do not want to enable
 284           L2CACHE, choose this option.
 285
 286 config ENABLE_ARM_SOC_BOOT0_HOOK
 287         bool "prepare BOOT0 header"
 288         help
 289           If the SoC's BOOT0 requires a header area filled with (magic)
 290           values, then choose this option, and create a define called
 291           ARM_SOC_BOOT0_HOOK which contains the required assembler
 292           preprocessor code.
 293
 294 config ARM_CORTEX_CPU_IS_UP
 295         bool
 296         default n
 297
 298 config USE_ARCH_MEMCPY
 299         bool "Use an assembly optimized implementation of memcpy"
 300         default y
 301         depends on !ARM64
 302         help
 303           Enable the generation of an optimized version of memcpy.
 304           Such implementation may be faster under some conditions
 305           but may increase the binary size.
 306
 307 config SPL_USE_ARCH_MEMCPY
 308         bool "Use an assembly optimized implementation of memcpy for SPL"
 309         default y if USE_ARCH_MEMCPY
 310         depends on !ARM64
 311         help
 312           Enable the generation of an optimized version of memcpy.
 313           Such implementation may be faster under some conditions
 314           but may increase the binary size.
 315
 316 config USE_ARCH_MEMSET
 317         bool "Use an assembly optimized implementation of memset"
 318         default y
 319         depends on !ARM64
 320         help
 321           Enable the generation of an optimized version of memset.
 322           Such implementation may be faster under some conditions
 323           but may increase the binary size.
 324
 325 config SPL_USE_ARCH_MEMSET
 326         bool "Use an assembly optimized implementation of memset for SPL"
 327         default y if USE_ARCH_MEMSET
 328         depends on !ARM64
 329         help
 330           Enable the generation of an optimized version of memset.
 331           Such implementation may be faster under some conditions
 332           but may increase the binary size.
 333
 334 config ARM64_SUPPORT_AARCH32
 335         bool "ARM64 system support AArch32 execution state"
 336         default y if ARM64 && !TARGET_THUNDERX_88XX
 337         help
 338           This ARM64 system supports AArch32 execution state.
 339
 340 choice
 341         prompt "Target select"
 342         default TARGET_HIKEY
 343
 344 config ARCH_AT91
 345         bool "Atmel AT91"
 346         select SPL_BOARD_INIT if SPL
 347
 348 config TARGET_EDB93XX
 349         bool "Support edb93xx"
 350         select CPU_ARM920T
 351         select PL010_SERIAL
 352
 353 config TARGET_ASPENITE
 354         bool "Support aspenite"
 355         select CPU_ARM926EJS
 356
 357 config TARGET_GPLUGD
 358         bool "Support gplugd"
 359         select CPU_ARM926EJS
 360
 361 config ARCH_DAVINCI
 362         bool "TI DaVinci"
 363         select CPU_ARM926EJS
 364         imply CMD_SAVES
 365         help
 366           Support for TI's DaVinci platform.
 367
 368 config KIRKWOOD
 369         bool "Marvell Kirkwood"
 370         select CPU_ARM926EJS
 371         select BOARD_EARLY_INIT_F
 372         select ARCH_MISC_INIT
 373
 374 config ARCH_MVEBU
 375         bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 376         select OF_CONTROL
 377         select OF_SEPARATE
 378         select DM
 379         select DM_ETH
 380         select DM_SERIAL
 381         select DM_SPI
 382         select DM_SPI_FLASH
 383
 384 config TARGET_DEVKIT3250
 385         bool "Support devkit3250"
 386         select CPU_ARM926EJS
 387         select SUPPORT_SPL
 388
 389 config TARGET_WORK_92105
 390         bool "Support work_92105"
 391         select CPU_ARM926EJS
 392         select SUPPORT_SPL
 393
 394 config TARGET_APF27
 395         bool "Support apf27"
 396         select CPU_ARM926EJS
 397         select SUPPORT_SPL
 398
 399 config TARGET_APX4DEVKIT
 400         bool "Support apx4devkit"
 401         select CPU_ARM926EJS
 402         select SUPPORT_SPL
 403         select PL011_SERIAL
 404
 405 config TARGET_XFI3
 406         bool "Support xfi3"
 407         select CPU_ARM926EJS
 408         select SUPPORT_SPL
 409         select PL011_SERIAL
 410
 411 config TARGET_M28EVK
 412         bool "Support m28evk"
 413         select CPU_ARM926EJS
 414         select SUPPORT_SPL
 415         select PL011_SERIAL
 416
 417 config TARGET_MX23EVK
 418         bool "Support mx23evk"
 419         select CPU_ARM926EJS
 420         select SUPPORT_SPL
 421         select BOARD_EARLY_INIT_F
 422         select PL011_SERIAL
 423
 424 config TARGET_MX28EVK
 425         bool "Support mx28evk"
 426         select CPU_ARM926EJS
 427         select SUPPORT_SPL
 428         select BOARD_EARLY_INIT_F
 429         select PL011_SERIAL
 430
 431 config TARGET_MX23_OLINUXINO
 432         bool "Support mx23_olinuxino"
 433         select CPU_ARM926EJS
 434         select SUPPORT_SPL
 435         select BOARD_EARLY_INIT_F
 436         select PL011_SERIAL
 437
 438 config TARGET_BG0900
 439         bool "Support bg0900"
 440         select CPU_ARM926EJS
 441         select SUPPORT_SPL
 442         select PL011_SERIAL
 443
 444 config TARGET_SANSA_FUZE_PLUS
 445         bool "Support sansa_fuze_plus"
 446         select CPU_ARM926EJS
 447         select SUPPORT_SPL
 448         select PL011_SERIAL
 449
 450 config TARGET_SC_SPS_1
 451         bool "Support sc_sps_1"
 452         select CPU_ARM926EJS
 453         select SUPPORT_SPL
 454         select PL011_SERIAL
 455
 456 config ORION5X
 457         bool "Marvell Orion"
 458         select CPU_ARM926EJS
 459
 460 config TARGET_SPEAR300
 461         bool "Support spear300"
 462         select CPU_ARM926EJS
 463         select BOARD_EARLY_INIT_F
 464         imply CMD_SAVES
 465         select PL011_SERIAL
 466
 467 config TARGET_SPEAR310
 468         bool "Support spear310"
 469         select CPU_ARM926EJS
 470         select BOARD_EARLY_INIT_F
 471         imply CMD_SAVES
 472         select PL011_SERIAL
 473
 474 config TARGET_SPEAR320
 475         bool "Support spear320"
 476         select CPU_ARM926EJS
 477         select BOARD_EARLY_INIT_F
 478         imply CMD_SAVES
 479         select PL011_SERIAL
 480
 481 config TARGET_SPEAR600
 482         bool "Support spear600"
 483         select CPU_ARM926EJS
 484         select BOARD_EARLY_INIT_F
 485         imply CMD_SAVES
 486         select PL011_SERIAL
 487
 488 config TARGET_STV0991
 489         bool "Support stv0991"
 490         select CPU_V7
 491         select DM
 492         select DM_SERIAL
 493         select DM_SPI
 494         select DM_SPI_FLASH
 495         select SPI_FLASH
 496         select PL01X_SERIAL
 497
 498 config TARGET_X600
 499         bool "Support x600"
 500         select BOARD_LATE_INIT
 501         select CPU_ARM926EJS
 502         select SUPPORT_SPL
 503         select PL011_SERIAL
 504
 505 config TARGET_IMX31_PHYCORE
 506         bool "Support imx31_phycore_eet"
 507         select CPU_ARM1136
 508         select BOARD_EARLY_INIT_F
 509
 510 config TARGET_IMX31_PHYCORE_EET
 511         bool "Support imx31_phycore_eet"
 512         select BOARD_LATE_INIT
 513         select CPU_ARM1136
 514         select BOARD_EARLY_INIT_F
 515
 516 config TARGET_MX31ADS
 517         bool "Support mx31ads"
 518         select CPU_ARM1136
 519         select BOARD_EARLY_INIT_F
 520
 521 config TARGET_MX31PDK
 522         bool "Support mx31pdk"
 523         select BOARD_LATE_INIT
 524         select CPU_ARM1136
 525         select SUPPORT_SPL
 526         select BOARD_EARLY_INIT_F
 527
 528 config TARGET_WOODBURN
 529         bool "Support woodburn"
 530         select CPU_ARM1136
 531
 532 config TARGET_WOODBURN_SD
 533         bool "Support woodburn_sd"
 534         select CPU_ARM1136
 535         select SUPPORT_SPL
 536
 537 config TARGET_FLEA3
 538         bool "Support flea3"
 539         select CPU_ARM1136
 540
 541 config TARGET_MX35PDK
 542         bool "Support mx35pdk"
 543         select BOARD_LATE_INIT
 544         select CPU_ARM1136
 545
 546 config ARCH_BCM283X
 547         bool "Broadcom BCM283X family"
 548         select DM
 549         select DM_SERIAL
 550         select DM_GPIO
 551         select OF_CONTROL
 552         select PL01X_SERIAL
 553         imply FAT_WRITE
 554
 555 config TARGET_VEXPRESS_CA15_TC2
 556         bool "Support vexpress_ca15_tc2"
 557         select CPU_V7
 558         select CPU_V7_HAS_NONSEC
 559         select CPU_V7_HAS_VIRT
 560         select PL011_SERIAL
 561
 562 config TARGET_VEXPRESS_CA5X2
 563         bool "Support vexpress_ca5x2"
 564         select CPU_V7
 565         select PL011_SERIAL
 566
 567 config TARGET_VEXPRESS_CA9X4
 568         bool "Support vexpress_ca9x4"
 569         select CPU_V7
 570         select PL011_SERIAL
 571
 572 config TARGET_BCM23550_W1D
 573         bool "Support bcm23550_w1d"
 574         select CPU_V7
 575         imply CRC32_VERIFY
 576         imply FAT_WRITE
 577
 578 config TARGET_BCM28155_AP
 579         bool "Support bcm28155_ap"
 580         select CPU_V7
 581         imply CRC32_VERIFY
 582         imply FAT_WRITE
 583
 584 config TARGET_BCMCYGNUS
 585         bool "Support bcmcygnus"
 586         select CPU_V7
 587         imply CRC32_VERIFY
 588         imply CMD_HASH
 589         imply FAT_WRITE
 590         imply HASH_VERIFY
 591         imply NETDEVICES
 592         imply BCM_SF2_ETH
 593         imply BCM_SF2_ETH_GMAC
 594
 595 config TARGET_BCMNSP
 596         bool "Support bcmnsp"
 597         select CPU_V7
 598
 599 config TARGET_BCMNS2
 600         bool "Support Broadcom Northstar2"
 601         select ARM64
 602         help
 603           Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
 604           ARMv8 Cortex-A57 processors targeting a broad range of networking
 605           applications
 606
 607 config ARCH_EXYNOS
 608         bool "Samsung EXYNOS"
 609         select DM
 610         select DM_I2C
 611         select DM_SPI_FLASH
 612         select DM_SERIAL
 613         select DM_SPI
 614         select DM_GPIO
 615         select DM_KEYBOARD
 616         imply FAT_WRITE
 617
 618 config ARCH_S5PC1XX
 619         bool "Samsung S5PC1XX"
 620         select CPU_V7
 621         select DM
 622         select DM_SERIAL
 623         select DM_GPIO
 624         select DM_I2C
 625
 626 config ARCH_HIGHBANK
 627         bool "Calxeda Highbank"
 628         select CPU_V7
 629         select PL011_SERIAL
 630
 631 config ARCH_INTEGRATOR
 632         bool "ARM Ltd. Integrator family"
 633         select DM
 634         select DM_SERIAL
 635         select PL01X_SERIAL
 636
 637 config ARCH_KEYSTONE
 638         bool "TI Keystone"
 639         select CPU_V7
 640         select SUPPORT_SPL
 641         select SYS_THUMB_BUILD
 642         select CMD_POWEROFF
 643         imply CMD_MTDPARTS
 644         imply FIT
 645         imply CMD_SAVES
 646
 647 config ARCH_OMAP2PLUS
 648         bool "TI OMAP2+"
 649         select CPU_V7
 650         select SPL_BOARD_INIT if SPL
 651         select SPL_STACK_R if SPL
 652         select SUPPORT_SPL
 653         imply FIT
 654
 655 config ARCH_MESON
 656         bool "Amlogic Meson"
 657         help
 658           Support for the Meson SoC family developed by Amlogic Inc.,
 659           targeted at media players and tablet computers. We currently
 660           support the S905 (GXBaby) 64-bit SoC.
 661
 662 config ARCH_MX25
 663         bool "NXP MX25"
 664         select CPU_ARM926EJS
 665
 666 config ARCH_MX7ULP
 667         bool "NXP MX7ULP"
 668         select CPU_V7
 669         select ROM_UNIFIED_SECTIONS
 670
 671 config ARCH_MX7
 672         bool "Freescale MX7"
 673         select CPU_V7
 674         select SYS_FSL_HAS_SEC if SECURE_BOOT
 675         select SYS_FSL_SEC_COMPAT_4
 676         select SYS_FSL_SEC_LE
 677         select BOARD_EARLY_INIT_F
 678         select ARCH_MISC_INIT
 679
 680 config ARCH_MX6
 681         bool "Freescale MX6"
 682         select CPU_V7
 683         select SYS_FSL_HAS_SEC if SECURE_BOOT
 684         select SYS_FSL_SEC_COMPAT_4
 685         select SYS_FSL_SEC_LE
 686         select SYS_THUMB_BUILD if SPL
 687
 688 if ARCH_MX6
 689 config SPL_LDSCRIPT
 690         default "arch/arm/mach-omap2/u-boot-spl.lds"
 691 endif
 692
 693 config ARCH_MX5
 694         bool "Freescale MX5"
 695         select CPU_V7
 696         select BOARD_EARLY_INIT_F
 697
 698 config ARCH_QEMU
 699         bool "QEMU Virtual Platform"
 700         select DM
 701         select DM_SERIAL
 702         select OF_CONTROL
 703         select PL01X_SERIAL
 704
 705 config ARCH_RMOBILE
 706         bool "Renesas ARM SoCs"
 707         select DM
 708         select DM_SERIAL
 709         select BOARD_EARLY_INIT_F
 710         imply FAT_WRITE
 711         imply SYS_THUMB_BUILD
 712
 713 config TARGET_S32V234EVB
 714         bool "Support s32v234evb"
 715         select ARM64
 716         select SYS_FSL_ERRATUM_ESDHC111
 717
 718 config ARCH_SNAPDRAGON
 719         bool "Qualcomm Snapdragon SoCs"
 720         select ARM64
 721         select DM
 722         select DM_GPIO
 723         select DM_SERIAL
 724         select SPMI
 725         select OF_CONTROL
 726         select OF_SEPARATE
 727
 728 config ARCH_SOCFPGA
 729         bool "Altera SOCFPGA family"
 730         select CPU_V7
 731         select SUPPORT_SPL
 732         select OF_CONTROL
 733         select SPL_OF_CONTROL
 734         select DM
 735         select DM_SPI_FLASH
 736         select DM_SPI
 737         select ENABLE_ARM_SOC_BOOT0_HOOK
 738         select ARCH_EARLY_INIT_R
 739         select ARCH_MISC_INIT
 740         select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 741         select SYS_THUMB_BUILD
 742         imply CMD_MTDPARTS
 743         imply CRC32_VERIFY
 744         imply FAT_WRITE
 745
 746 config ARCH_SUNXI
 747         bool "Support sunxi (Allwinner) SoCs"
 748         select BINMAN
 749         select CMD_GPIO
 750         select CMD_MMC if MMC
 751         select CMD_USB if DISTRO_DEFAULTS
 752         select DM
 753         select DM_ETH
 754         select DM_GPIO
 755         select DM_KEYBOARD
 756         select DM_SERIAL
 757         select DM_USB if DISTRO_DEFAULTS
 758         select OF_BOARD_SETUP
 759         select OF_CONTROL
 760         select OF_SEPARATE
 761         select SPL_STACK_R if SPL
 762         select SPL_SYS_MALLOC_SIMPLE if SPL
 763         select SYS_NS16550
 764         select SPL_SYS_THUMB_BUILD if !ARM64
 765         select SYS_THUMB_BUILD if !ARM64
 766         select USB if DISTRO_DEFAULTS
 767         select USB_STORAGE if DISTRO_DEFAULTS
 768         select USB_KEYBOARD if DISTRO_DEFAULTS
 769         select USE_TINY_PRINTF
 770         imply CMD_GPT
 771         imply FAT_WRITE
 772         imply OF_LIBFDT_OVERLAY
 773         imply PRE_CONSOLE_BUFFER
 774         imply SPL_GPIO_SUPPORT
 775         imply SPL_LIBCOMMON_SUPPORT
 776         imply SPL_LIBDISK_SUPPORT
 777         imply SPL_LIBGENERIC_SUPPORT
 778         imply SPL_MMC_SUPPORT if MMC
 779         imply SPL_POWER_SUPPORT
 780         imply SPL_SERIAL_SUPPORT
 781         imply USB_GADGET
 782
 783 config TARGET_TS4600
 784         bool "Support TS4600"
 785         select CPU_ARM926EJS
 786         select SUPPORT_SPL
 787         select PL011_SERIAL
 788
 789 config ARCH_VF610
 790         bool "Freescale Vybrid"
 791         select CPU_V7
 792         select SYS_FSL_ERRATUM_ESDHC111
 793         imply CMD_MTDPARTS
 794         imply NAND
 795
 796 config ARCH_ZYNQ
 797         bool "Xilinx Zynq based platform"
 798         select BOARD_LATE_INIT
 799         select CPU_V7
 800         select SUPPORT_SPL
 801         select OF_CONTROL
 802         select SPL_BOARD_INIT if SPL
 803         select SPL_OF_CONTROL if SPL
 804         select DM
 805         select DM_ETH
 806         select DM_GPIO
 807         select SPL_DM if SPL
 808         select DM_MMC
 809         select DM_SPI
 810         select DM_SERIAL
 811         select DM_SPI_FLASH
 812         select SPL_SEPARATE_BSS if SPL
 813         select DM_USB if USB
 814         select BLK
 815         select CLK
 816         select SPL_CLK
 817         select CLK_ZYNQ
 818         imply CMD_CLK
 819         imply FAT_WRITE
 820         imply CMD_SPL
 821
 822 config ARCH_ZYNQMP
 823         bool "Xilinx ZynqMP based platform"
 824         select ARM64
 825         select BOARD_LATE_INIT
 826         select DM
 827         select OF_CONTROL
 828         select DM_SERIAL
 829         select SUPPORT_SPL
 830         select CLK
 831         select SPL_BOARD_INIT if SPL
 832         select SPL_CLK if SPL
 833         select DM_USB if USB
 834         imply FAT_WRITE
 835
 836 config TEGRA
 837         bool "NVIDIA Tegra"
 838         imply FAT_WRITE
 839
 840 config TARGET_VEXPRESS64_AEMV8A
 841         bool "Support vexpress_aemv8a"
 842         select ARM64
 843         select PL01X_SERIAL
 844
 845 config TARGET_VEXPRESS64_BASE_FVP
 846         bool "Support Versatile Express ARMv8a FVP BASE model"
 847         select ARM64
 848         select SEMIHOSTING
 849         select PL01X_SERIAL
 850
 851 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 852         bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 853         select ARM64
 854         select PL01X_SERIAL
 855         help
 856           This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 857           the default config to allow the user to load the images directly into
 858           DRAM using model parameters rather than by using semi-hosting to load
 859           the files from the host filesystem.
 860
 861 config TARGET_VEXPRESS64_JUNO
 862         bool "Support Versatile Express Juno Development Platform"
 863         select ARM64
 864         select PL01X_SERIAL
 865
 866 config TARGET_LS2080A_EMU
 867         bool "Support ls2080a_emu"
 868         select ARCH_LS2080A
 869         select ARM64
 870         select ARMV8_MULTIENTRY
 871         select ARCH_MISC_INIT
 872         help
 873           Support for Freescale LS2080A_EMU platform
 874           The LS2080A Development System (EMULATOR) is a pre silicon
 875           development platform that supports the QorIQ LS2080A
 876           Layerscape Architecture processor.
 877
 878 config TARGET_LS2080A_SIMU
 879         bool "Support ls2080a_simu"
 880         select ARCH_LS2080A
 881         select ARM64
 882         select ARMV8_MULTIENTRY
 883         select ARCH_MISC_INIT
 884         help
 885           Support for Freescale LS2080A_SIMU platform
 886           The LS2080A Development System (QDS) is a pre silicon
 887           development platform that supports the QorIQ LS2080A
 888           Layerscape Architecture processor.
 889
 890 config TARGET_LS1088AQDS
 891         bool "Support ls1088aqds"
 892         select ARCH_LS1088A
 893         select ARM64
 894         select ARMV8_MULTIENTRY
 895         select ARCH_MISC_INIT
 896         select BOARD_LATE_INIT
 897         select SUPPORT_SPL
 898         help
 899           Support for NXP LS1088AQDS platform
 900           The LS1088A Development System (QDS) is a high-performance
 901           development platform that supports the QorIQ LS1088A
 902           Layerscape Architecture processor.
 903
 904 config TARGET_LS2080AQDS
 905         bool "Support ls2080aqds"
 906         select ARCH_LS2080A
 907         select ARM64
 908         select ARMV8_MULTIENTRY
 909         select BOARD_LATE_INIT
 910         select SUPPORT_SPL
 911         select ARCH_MISC_INIT
 912         imply SCSI
 913         imply SCSI_AHCI
 914         help
 915           Support for Freescale LS2080AQDS platform
 916           The LS2080A Development System (QDS) is a high-performance
 917           development platform that supports the QorIQ LS2080A
 918           Layerscape Architecture processor.
 919
 920 config TARGET_LS2080ARDB
 921         bool "Support ls2080ardb"
 922         select ARCH_LS2080A
 923         select ARM64
 924         select ARMV8_MULTIENTRY
 925         select BOARD_LATE_INIT
 926         select SUPPORT_SPL
 927         select ARCH_MISC_INIT
 928         imply SCSI
 929         imply SCSI_AHCI
 930         help
 931           Support for Freescale LS2080ARDB platform.
 932           The LS2080A Reference design board (RDB) is a high-performance
 933           development platform that supports the QorIQ LS2080A
 934           Layerscape Architecture processor.
 935
 936 config TARGET_LS2081ARDB
 937         bool "Support ls2081ardb"
 938         select ARCH_LS2080A
 939         select ARM64
 940         select ARMV8_MULTIENTRY
 941         select BOARD_LATE_INIT
 942         select SUPPORT_SPL
 943         select ARCH_MISC_INIT
 944         help
 945           Support for Freescale LS2081ARDB platform.
 946           The LS2081A Reference design board (RDB) is a high-performance
 947           development platform that supports the QorIQ LS2081A/LS2041A
 948           Layerscape Architecture processor.
 949
 950 config TARGET_HIKEY
 951         bool "Support HiKey 96boards Consumer Edition Platform"
 952         select ARM64
 953         select DM
 954         select DM_GPIO
 955         select DM_SERIAL
 956         select OF_CONTROL
 957         select PL01X_SERIAL
 958           help
 959           Support for HiKey 96boards platform. It features a HI6220
 960           SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 961
 962 config TARGET_POPLAR
 963         bool "Support Poplar 96boards Enterprise Edition Platform"
 964         select ARM64
 965         select DM
 966         select OF_CONTROL
 967         select DM_SERIAL
 968         select DM_USB
 969         select PL01X_SERIAL
 970           help
 971           Support for Poplar 96boards EE platform. It features a HI3798cv200
 972           SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
 973           making it capable of running any commercial set-top solution based on
 974           Linux or Android.
 975
 976 config TARGET_LS1012AQDS
 977         bool "Support ls1012aqds"
 978         select ARCH_LS1012A
 979         select ARM64
 980         select BOARD_LATE_INIT
 981         help
 982           Support for Freescale LS1012AQDS platform.
 983           The LS1012A Development System (QDS) is a high-performance
 984           development platform that supports the QorIQ LS1012A
 985           Layerscape Architecture processor.
 986
 987 config TARGET_LS1012ARDB
 988         bool "Support ls1012ardb"
 989         select ARCH_LS1012A
 990         select ARM64
 991         select BOARD_LATE_INIT
 992         imply SCSI
 993         imply SCSI_AHCI
 994         help
 995           Support for Freescale LS1012ARDB platform.
 996           The LS1012A Reference design board (RDB) is a high-performance
 997           development platform that supports the QorIQ LS1012A
 998           Layerscape Architecture processor.
 999
1000 config TARGET_LS1012A2G5RDB
1001         bool "Support ls1012a2g5rdb"
1002         select ARCH_LS1012A
1003         select ARM64
1004         select BOARD_LATE_INIT
1005         imply SCSI
1006         help
1007           Support for Freescale LS1012A2G5RDB platform.
1008           The LS1012A 2G5 Reference design board (RDB) is a high-performance
1009           development platform that supports the QorIQ LS1012A
1010           Layerscape Architecture processor.
1011
1012 config TARGET_LS1012AFRDM
1013         bool "Support ls1012afrdm"
1014         select ARCH_LS1012A
1015         select ARM64
1016         help
1017           Support for Freescale LS1012AFRDM platform.
1018           The LS1012A Freedom  board (FRDM) is a high-performance
1019           development platform that supports the QorIQ LS1012A
1020           Layerscape Architecture processor.
1021
1022 config TARGET_LS1088ARDB
1023         bool "Support ls1088ardb"
1024         select ARCH_LS1088A
1025         select ARM64
1026         select ARMV8_MULTIENTRY
1027         select ARCH_MISC_INIT
1028         select BOARD_LATE_INIT
1029         select SUPPORT_SPL
1030         help
1031           Support for NXP LS1088ARDB platform.
1032           The LS1088A Reference design board (RDB) is a high-performance
1033           development platform that supports the QorIQ LS1088A
1034           Layerscape Architecture processor.
1035
1036 config TARGET_LS1021AQDS
1037         bool "Support ls1021aqds"
1038         select BOARD_LATE_INIT
1039         select CPU_V7
1040         select CPU_V7_HAS_NONSEC
1041         select CPU_V7_HAS_VIRT
1042         select SUPPORT_SPL
1043         select ARCH_LS1021A
1044         select ARCH_SUPPORT_PSCI
1045         select LS1_DEEP_SLEEP
1046         select SYS_FSL_DDR
1047         select BOARD_EARLY_INIT_F
1048         imply SCSI
1049
1050 config TARGET_LS1021ATWR
1051         bool "Support ls1021atwr"
1052         select BOARD_LATE_INIT
1053         select CPU_V7
1054         select CPU_V7_HAS_NONSEC
1055         select CPU_V7_HAS_VIRT
1056         select SUPPORT_SPL
1057         select ARCH_LS1021A
1058         select ARCH_SUPPORT_PSCI
1059         select LS1_DEEP_SLEEP
1060         select BOARD_EARLY_INIT_F
1061         imply SCSI
1062
1063 config TARGET_LS1021AIOT
1064         bool "Support ls1021aiot"
1065         select BOARD_LATE_INIT
1066         select CPU_V7
1067         select CPU_V7_HAS_NONSEC
1068         select CPU_V7_HAS_VIRT
1069         select SUPPORT_SPL
1070         select ARCH_LS1021A
1071         select ARCH_SUPPORT_PSCI
1072         imply SCSI
1073         help
1074           Support for Freescale LS1021AIOT platform.
1075           The LS1021A Freescale board (IOT) is a high-performance
1076           development platform that supports the QorIQ LS1021A
1077           Layerscape Architecture processor.
1078
1079 config TARGET_LS1043AQDS
1080         bool "Support ls1043aqds"
1081         select ARCH_LS1043A
1082         select ARM64
1083         select ARMV8_MULTIENTRY
1084         select BOARD_LATE_INIT
1085         select SUPPORT_SPL
1086         select BOARD_EARLY_INIT_F
1087         imply SCSI
1088         help
1089           Support for Freescale LS1043AQDS platform.
1090
1091 config TARGET_LS1043ARDB
1092         bool "Support ls1043ardb"
1093         select ARCH_LS1043A
1094         select ARM64
1095         select ARMV8_MULTIENTRY
1096         select BOARD_LATE_INIT
1097         select SUPPORT_SPL
1098         select BOARD_EARLY_INIT_F
1099         imply SCSI
1100         help
1101           Support for Freescale LS1043ARDB platform.
1102
1103 config TARGET_LS1046AQDS
1104         bool "Support ls1046aqds"
1105         select ARCH_LS1046A
1106         select ARM64
1107         select ARMV8_MULTIENTRY
1108         select BOARD_LATE_INIT
1109         select SUPPORT_SPL
1110         select DM_SPI_FLASH if DM_SPI
1111         select BOARD_EARLY_INIT_F
1112         imply SCSI
1113         help
1114           Support for Freescale LS1046AQDS platform.
1115           The LS1046A Development System (QDS) is a high-performance
1116           development platform that supports the QorIQ LS1046A
1117           Layerscape Architecture processor.
1118
1119 config TARGET_LS1046ARDB
1120         bool "Support ls1046ardb"
1121         select ARCH_LS1046A
1122         select ARM64
1123         select ARMV8_MULTIENTRY
1124         select BOARD_LATE_INIT
1125         select SUPPORT_SPL
1126         select DM_SPI_FLASH if DM_SPI
1127         select POWER_MC34VR500
1128         select BOARD_EARLY_INIT_F
1129         imply SCSI
1130         help
1131           Support for Freescale LS1046ARDB platform.
1132           The LS1046A Reference Design Board (RDB) is a high-performance
1133           development platform that supports the QorIQ LS1046A
1134           Layerscape Architecture processor.
1135
1136 config TARGET_H2200
1137         bool "Support h2200"
1138         select CPU_PXA
1139
1140 config TARGET_ZIPITZ2
1141         bool "Support zipitz2"
1142         select CPU_PXA
1143
1144 config TARGET_COLIBRI_PXA270
1145         bool "Support colibri_pxa270"
1146         select CPU_PXA
1147
1148 config ARCH_UNIPHIER
1149         bool "Socionext UniPhier SoCs"
1150         select BOARD_LATE_INIT
1151         select DM
1152         select DM_GPIO
1153         select DM_I2C
1154         select DM_MMC
1155         select DM_RESET
1156         select DM_SERIAL
1157         select DM_USB
1158         select OF_CONTROL
1159         select OF_LIBFDT
1160         select PINCTRL
1161         select SPL_BOARD_INIT if SPL
1162         select SPL_DM if SPL
1163         select SPL_LIBCOMMON_SUPPORT if SPL
1164         select SPL_LIBGENERIC_SUPPORT if SPL
1165         select SPL_OF_CONTROL if SPL
1166         select SPL_PINCTRL if SPL
1167         select SUPPORT_SPL
1168         imply FAT_WRITE
1169         help
1170           Support for UniPhier SoC family developed by Socionext Inc.
1171           (formerly, System LSI Business Division of Panasonic Corporation)
1172
1173 config STM32
1174         bool "Support STM32"
1175         select CPU_V7M
1176         select DM
1177         select DM_SERIAL
1178         select SYS_THUMB_BUILD
1179
1180 config ARCH_STI
1181         bool "Support STMicrolectronics SoCs"
1182         select CPU_V7
1183         select DM
1184         select DM_SERIAL
1185         select BLK
1186         select DM_MMC
1187         select DM_RESET
1188         help
1189           Support for STMicroelectronics STiH407/10 SoC family.
1190           This SoC is used on Linaro 96Board STiH410-B2260
1191
1192 config ARCH_ROCKCHIP
1193         bool "Support Rockchip SoCs"
1194         select OF_CONTROL
1195         select BLK
1196         select DM
1197         select SPL_DM if SPL
1198         select SYS_MALLOC_F
1199         select SYS_THUMB_BUILD if !ARM64
1200         select SPL_SYS_MALLOC_SIMPLE if SPL
1201         select DM_GPIO
1202         select DM_I2C
1203         select DM_MMC
1204         select DM_SERIAL
1205         select DM_SPI
1206         select DM_SPI_FLASH
1207         select DM_USB if USB
1208         select DM_PWM
1209         select DM_REGULATOR
1210         select ENABLE_ARM_SOC_BOOT0_HOOK
1211         imply CMD_FASTBOOT
1212         imply FASTBOOT
1213         imply FAT_WRITE
1214         imply USB_FUNCTION_FASTBOOT
1215         imply SPL_SYSRESET
1216         imply TPL_SYSRESET
1217         imply ADC
1218         imply SARADC_ROCKCHIP
1219
1220 config TARGET_THUNDERX_88XX
1221         bool "Support ThunderX 88xx"
1222         select ARM64
1223         select OF_CONTROL
1224         select SYS_CACHE_SHIFT_7
1225         select PL01X_SERIAL
1226
1227 config ARCH_ASPEED
1228         bool "Support Aspeed SoCs"
1229         select OF_CONTROL
1230         select DM
1231
1232 endchoice
1233
1234 source "arch/arm/mach-aspeed/Kconfig"
1235
1236 source "arch/arm/mach-at91/Kconfig"
1237
1238 source "arch/arm/mach-bcm283x/Kconfig"
1239
1240 source "arch/arm/mach-davinci/Kconfig"
1241
1242 source "arch/arm/mach-exynos/Kconfig"
1243
1244 source "arch/arm/mach-highbank/Kconfig"
1245
1246 source "arch/arm/mach-integrator/Kconfig"
1247
1248 source "arch/arm/mach-keystone/Kconfig"
1249
1250 source "arch/arm/mach-kirkwood/Kconfig"
1251
1252 source "arch/arm/mach-mvebu/Kconfig"
1253
1254 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1255
1256 source "arch/arm/mach-imx/mx2/Kconfig"
1257
1258 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1259
1260 source "arch/arm/mach-imx/mx7/Kconfig"
1261
1262 source "arch/arm/mach-imx/mx6/Kconfig"
1263
1264 source "arch/arm/mach-imx/mx5/Kconfig"
1265
1266 source "arch/arm/mach-omap2/Kconfig"
1267
1268 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1269
1270 source "arch/arm/mach-orion5x/Kconfig"
1271
1272 source "arch/arm/mach-rmobile/Kconfig"
1273
1274 source "arch/arm/mach-meson/Kconfig"
1275
1276 source "arch/arm/mach-qemu/Kconfig"
1277
1278 source "arch/arm/mach-rockchip/Kconfig"
1279
1280 source "arch/arm/mach-s5pc1xx/Kconfig"
1281
1282 source "arch/arm/mach-snapdragon/Kconfig"
1283
1284 source "arch/arm/mach-socfpga/Kconfig"
1285
1286 source "arch/arm/mach-sti/Kconfig"
1287
1288 source "arch/arm/mach-stm32/Kconfig"
1289
1290 source "arch/arm/mach-sunxi/Kconfig"
1291
1292 source "arch/arm/mach-tegra/Kconfig"
1293
1294 source "arch/arm/mach-uniphier/Kconfig"
1295
1296 source "arch/arm/cpu/armv7/vf610/Kconfig"
1297
1298 source "arch/arm/mach-zynq/Kconfig"
1299
1300 source "arch/arm/cpu/armv7/Kconfig"
1301
1302 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1303
1304 source "arch/arm/cpu/armv8/Kconfig"
1305
1306 source "arch/arm/mach-imx/Kconfig"
1307
1308 source "board/aries/m28evk/Kconfig"
1309 source "board/bosch/shc/Kconfig"
1310 source "board/CarMediaLab/flea3/Kconfig"
1311 source "board/Marvell/aspenite/Kconfig"
1312 source "board/Marvell/gplugd/Kconfig"
1313 source "board/armadeus/apf27/Kconfig"
1314 source "board/armltd/vexpress/Kconfig"
1315 source "board/armltd/vexpress64/Kconfig"
1316 source "board/bluegiga/apx4devkit/Kconfig"
1317 source "board/broadcom/bcm23550_w1d/Kconfig"
1318 source "board/broadcom/bcm28155_ap/Kconfig"
1319 source "board/broadcom/bcmcygnus/Kconfig"
1320 source "board/broadcom/bcmnsp/Kconfig"
1321 source "board/broadcom/bcmns2/Kconfig"
1322 source "board/cavium/thunderx/Kconfig"
1323 source "board/cirrus/edb93xx/Kconfig"
1324 source "board/creative/xfi3/Kconfig"
1325 source "board/eets/pdu001/Kconfig"
1326 source "board/freescale/ls2080a/Kconfig"
1327 source "board/freescale/ls2080aqds/Kconfig"
1328 source "board/freescale/ls2080ardb/Kconfig"
1329 source "board/freescale/ls1088a/Kconfig"
1330 source "board/freescale/ls1021aqds/Kconfig"
1331 source "board/freescale/ls1043aqds/Kconfig"
1332 source "board/freescale/ls1021atwr/Kconfig"
1333 source "board/freescale/ls1021aiot/Kconfig"
1334 source "board/freescale/ls1046aqds/Kconfig"
1335 source "board/freescale/ls1043ardb/Kconfig"
1336 source "board/freescale/ls1046ardb/Kconfig"
1337 source "board/freescale/ls1012aqds/Kconfig"
1338 source "board/freescale/ls1012ardb/Kconfig"
1339 source "board/freescale/ls1012afrdm/Kconfig"
1340 source "board/freescale/mx23evk/Kconfig"
1341 source "board/freescale/mx28evk/Kconfig"
1342 source "board/freescale/mx31ads/Kconfig"
1343 source "board/freescale/mx31pdk/Kconfig"
1344 source "board/freescale/mx35pdk/Kconfig"
1345 source "board/freescale/s32v234evb/Kconfig"
1346 source "board/gdsys/a38x/Kconfig"
1347 source "board/grinn/chiliboard/Kconfig"
1348 source "board/gumstix/pepper/Kconfig"
1349 source "board/h2200/Kconfig"
1350 source "board/hisilicon/hikey/Kconfig"
1351 source "board/hisilicon/poplar/Kconfig"
1352 source "board/imx31_phycore/Kconfig"
1353 source "board/isee/igep003x/Kconfig"
1354 source "board/olimex/mx23_olinuxino/Kconfig"
1355 source "board/phytec/pcm051/Kconfig"
1356 source "board/ppcag/bg0900/Kconfig"
1357 source "board/sandisk/sansa_fuze_plus/Kconfig"
1358 source "board/schulercontrol/sc_sps_1/Kconfig"
1359 source "board/silica/pengwyn/Kconfig"
1360 source "board/spear/spear300/Kconfig"
1361 source "board/spear/spear310/Kconfig"
1362 source "board/spear/spear320/Kconfig"
1363 source "board/spear/spear600/Kconfig"
1364 source "board/spear/x600/Kconfig"
1365 source "board/st/stv0991/Kconfig"
1366 source "board/tcl/sl50/Kconfig"
1367 source "board/birdland/bav335x/Kconfig"
1368 source "board/timll/devkit3250/Kconfig"
1369 source "board/toradex/colibri_pxa270/Kconfig"
1370 source "board/technologic/ts4600/Kconfig"
1371 source "board/vscom/baltos/Kconfig"
1372 source "board/woodburn/Kconfig"
1373 source "board/work-microwave/work_92105/Kconfig"
1374 source "board/zipitz2/Kconfig"
1375
1376 source "arch/arm/Kconfig.debug"
1377
1378 endmenu
1379
1380 config SPL_LDSCRIPT
1381         default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
1382         default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1383         default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
1384
1385