arch/arm/Kconfig

   1 menu "ARM architecture"
   2         depends on ARM
   3
   4 config SYS_ARCH
   5         default "arm"
   6
   7 config ARM64
   8         bool
   9         select PHYS_64BIT
  10         select SYS_CACHE_SHIFT_6
  11
  12 config DMA_ADDR_T_64BIT
  13         bool
  14         default y if ARM64
  15
  16 config HAS_VBAR
  17         bool
  18
  19 config HAS_THUMB2
  20         bool
  21
  22 # If set, the workarounds for these ARM errata are applied early during U-Boot
  23 # startup. Note that in general these options force the workarounds to be
  24 # applied; no CPU-type/version detection exists, unlike the similar options in
  25 # the Linux kernel. Do not set these options unless they apply!  Also note that
  26 # the following can be machine specific errata. These do have ability to
  27 # provide rudimentary version and machine specific checks, but expect no
  28 # product checks:
  29 # CONFIG_ARM_ERRATA_430973
  30 # CONFIG_ARM_ERRATA_454179
  31 # CONFIG_ARM_ERRATA_621766
  32 # CONFIG_ARM_ERRATA_798870
  33 # CONFIG_ARM_ERRATA_801819
  34 config ARM_ERRATA_430973
  35         bool
  36
  37 config ARM_ERRATA_454179
  38         bool
  39
  40 config ARM_ERRATA_621766
  41         bool
  42
  43 config ARM_ERRATA_716044
  44         bool
  45
  46 config ARM_ERRATA_725233
  47         bool
  48
  49 config ARM_ERRATA_742230
  50         bool
  51
  52 config ARM_ERRATA_743622
  53         bool
  54
  55 config ARM_ERRATA_751472
  56         bool
  57
  58 config ARM_ERRATA_761320
  59         bool
  60
  61 config ARM_ERRATA_773022
  62         bool
  63
  64 config ARM_ERRATA_774769
  65         bool
  66
  67 config ARM_ERRATA_794072
  68         bool
  69
  70 config ARM_ERRATA_798870
  71         bool
  72
  73 config ARM_ERRATA_801819
  74         bool
  75
  76 config ARM_ERRATA_826974
  77         bool
  78
  79 config ARM_ERRATA_828024
  80         bool
  81
  82 config ARM_ERRATA_829520
  83         bool
  84
  85 config ARM_ERRATA_833069
  86         bool
  87
  88 config ARM_ERRATA_833471
  89         bool
  90
  91 config CPU_ARM720T
  92         bool
  93         select SYS_CACHE_SHIFT_5
  94
  95 config CPU_ARM920T
  96         bool
  97         select SYS_CACHE_SHIFT_5
  98
  99 config CPU_ARM926EJS
 100         bool
 101         select SYS_CACHE_SHIFT_5
 102
 103 config CPU_ARM946ES
 104         bool
 105         select SYS_CACHE_SHIFT_5
 106
 107 config CPU_ARM1136
 108         bool
 109         select SYS_CACHE_SHIFT_5
 110
 111 config CPU_ARM1176
 112         bool
 113         select HAS_VBAR
 114         select SYS_CACHE_SHIFT_5
 115
 116 config CPU_V7
 117         bool
 118         select HAS_VBAR
 119         select HAS_THUMB2
 120         select SYS_CACHE_SHIFT_6
 121
 122 config CPU_V7M
 123         bool
 124         select HAS_THUMB2
 125         select SYS_CACHE_SHIFT_5
 126
 127 config CPU_PXA
 128         bool
 129         select SYS_CACHE_SHIFT_5
 130
 131 config CPU_SA1100
 132         bool
 133         select SYS_CACHE_SHIFT_5
 134
 135 config SYS_CPU
 136         default "arm720t" if CPU_ARM720T
 137         default "arm920t" if CPU_ARM920T
 138         default "arm926ejs" if CPU_ARM926EJS
 139         default "arm946es" if CPU_ARM946ES
 140         default "arm1136" if CPU_ARM1136
 141         default "arm1176" if CPU_ARM1176
 142         default "armv7" if CPU_V7
 143         default "armv7m" if CPU_V7M
 144         default "pxa" if CPU_PXA
 145         default "sa1100" if CPU_SA1100
 146         default "armv8" if ARM64
 147
 148 config SYS_ARM_ARCH
 149         int
 150         default 4 if CPU_ARM720T
 151         default 4 if CPU_ARM920T
 152         default 5 if CPU_ARM926EJS
 153         default 5 if CPU_ARM946ES
 154         default 6 if CPU_ARM1136
 155         default 6 if CPU_ARM1176
 156         default 7 if CPU_V7
 157         default 7 if CPU_V7M
 158         default 5 if CPU_PXA
 159         default 4 if CPU_SA1100
 160         default 8 if ARM64
 161
 162 config SYS_CACHE_SHIFT_5
 163         bool
 164
 165 config SYS_CACHE_SHIFT_6
 166         bool
 167
 168 config SYS_CACHE_SHIFT_7
 169         bool
 170
 171 config SYS_CACHELINE_SIZE
 172         int
 173         default 128 if SYS_CACHE_SHIFT_7
 174         default 64 if SYS_CACHE_SHIFT_6
 175         default 32 if SYS_CACHE_SHIFT_5
 176
 177 config ARM_SMCCC
 178         bool "Support for ARM SMC Calling Convention (SMCCC)"
 179         depends on CPU_V7 || ARM64
 180         select ARM_PSCI_FW
 181         help
 182           Say Y here if you want to enable ARM SMC Calling Convention.
 183           This should be enabled if U-Boot needs to communicate with system
 184           firmware (for example, PSCI) according to SMCCC.
 185
 186 config SEMIHOSTING
 187         bool "support boot from semihosting"
 188         help
 189           In emulated environments, semihosting is a way for
 190           the hosted environment to call out to the emulator to
 191           retrieve files from the host machine.
 192
 193 config SYS_THUMB_BUILD
 194         bool "Build U-Boot using the Thumb instruction set"
 195         depends on !ARM64
 196         help
 197            Use this flag to build U-Boot using the Thumb instruction set for
 198            ARM architectures. Thumb instruction set provides better code
 199            density. For ARM architectures that support Thumb2 this flag will
 200            result in Thumb2 code generated by GCC.
 201
 202 config SPL_SYS_THUMB_BUILD
 203         bool "Build SPL using the Thumb instruction set"
 204         default y if SYS_THUMB_BUILD
 205         depends on !ARM64
 206         help
 207            Use this flag to build SPL using the Thumb instruction set for
 208            ARM architectures. Thumb instruction set provides better code
 209            density. For ARM architectures that support Thumb2 this flag will
 210            result in Thumb2 code generated by GCC.
 211
 212 config SYS_L2CACHE_OFF
 213         bool "L2cache off"
 214         help
 215           If SoC does not support L2CACHE or one do not want to enable
 216           L2CACHE, choose this option.
 217
 218 config ENABLE_ARM_SOC_BOOT0_HOOK
 219         bool "prepare BOOT0 header"
 220         help
 221           If the SoC's BOOT0 requires a header area filled with (magic)
 222           values, then choose this option, and create a define called
 223           ARM_SOC_BOOT0_HOOK which contains the required assembler
 224           preprocessor code.
 225
 226 config ARM_CORTEX_CPU_IS_UP
 227         bool
 228         default n
 229
 230 config USE_ARCH_MEMCPY
 231         bool "Use an assembly optimized implementation of memcpy"
 232         default y
 233         depends on !ARM64
 234         help
 235           Enable the generation of an optimized version of memcpy.
 236           Such implementation may be faster under some conditions
 237           but may increase the binary size.
 238
 239 config SPL_USE_ARCH_MEMCPY
 240         bool "Use an assembly optimized implementation of memcpy"
 241         default y if USE_ARCH_MEMCPY
 242         depends on !ARM64
 243         help
 244           Enable the generation of an optimized version of memcpy.
 245           Such implementation may be faster under some conditions
 246           but may increase the binary size.
 247
 248 config USE_ARCH_MEMSET
 249         bool "Use an assembly optimized implementation of memset"
 250         default y
 251         depends on !ARM64
 252         help
 253           Enable the generation of an optimized version of memset.
 254           Such implementation may be faster under some conditions
 255           but may increase the binary size.
 256
 257 config SPL_USE_ARCH_MEMSET
 258         bool "Use an assembly optimized implementation of memset"
 259         default y if USE_ARCH_MEMSET
 260         depends on !ARM64
 261         help
 262           Enable the generation of an optimized version of memset.
 263           Such implementation may be faster under some conditions
 264           but may increase the binary size.
 265
 266 config ARM64_SUPPORT_AARCH32
 267         bool "ARM64 system support AArch32 execution state"
 268         default y if ARM64 && !TARGET_THUNDERX_88XX
 269         help
 270           This ARM64 system supports AArch32 execution state.
 271
 272 choice
 273         prompt "Target select"
 274         default TARGET_HIKEY
 275
 276 config ARCH_AT91
 277         bool "Atmel AT91"
 278
 279 config TARGET_EDB93XX
 280         bool "Support edb93xx"
 281         select CPU_ARM920T
 282
 283 config TARGET_ASPENITE
 284         bool "Support aspenite"
 285         select CPU_ARM926EJS
 286
 287 config TARGET_GPLUGD
 288         bool "Support gplugd"
 289         select CPU_ARM926EJS
 290
 291 config ARCH_DAVINCI
 292         bool "TI DaVinci"
 293         select CPU_ARM926EJS
 294         help
 295           Support for TI's DaVinci platform.
 296
 297 config KIRKWOOD
 298         bool "Marvell Kirkwood"
 299         select CPU_ARM926EJS
 300         select BOARD_EARLY_INIT_F
 301         select ARCH_MISC_INIT
 302
 303 config ARCH_MVEBU
 304         bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 305         select OF_CONTROL
 306         select OF_SEPARATE
 307         select DM
 308         select DM_ETH
 309         select DM_SERIAL
 310         select DM_SPI
 311         select DM_SPI_FLASH
 312
 313 config TARGET_DEVKIT3250
 314         bool "Support devkit3250"
 315         select CPU_ARM926EJS
 316         select SUPPORT_SPL
 317
 318 config TARGET_WORK_92105
 319         bool "Support work_92105"
 320         select CPU_ARM926EJS
 321         select SUPPORT_SPL
 322
 323 config TARGET_MX25PDK
 324         bool "Support mx25pdk"
 325         select BOARD_LATE_INIT
 326         select CPU_ARM926EJS
 327         select BOARD_EARLY_INIT_F
 328
 329 config TARGET_ZMX25
 330         bool "Support zmx25"
 331         select BOARD_LATE_INIT
 332         select CPU_ARM926EJS
 333
 334 config TARGET_APF27
 335         bool "Support apf27"
 336         select CPU_ARM926EJS
 337         select SUPPORT_SPL
 338
 339 config TARGET_APX4DEVKIT
 340         bool "Support apx4devkit"
 341         select CPU_ARM926EJS
 342         select SUPPORT_SPL
 343
 344 config TARGET_XFI3
 345         bool "Support xfi3"
 346         select CPU_ARM926EJS
 347         select SUPPORT_SPL
 348
 349 config TARGET_M28EVK
 350         bool "Support m28evk"
 351         select CPU_ARM926EJS
 352         select SUPPORT_SPL
 353
 354 config TARGET_MX23EVK
 355         bool "Support mx23evk"
 356         select CPU_ARM926EJS
 357         select SUPPORT_SPL
 358         select BOARD_EARLY_INIT_F
 359
 360 config TARGET_MX28EVK
 361         bool "Support mx28evk"
 362         select CPU_ARM926EJS
 363         select SUPPORT_SPL
 364         select BOARD_EARLY_INIT_F
 365
 366 config TARGET_MX23_OLINUXINO
 367         bool "Support mx23_olinuxino"
 368         select CPU_ARM926EJS
 369         select SUPPORT_SPL
 370         select BOARD_EARLY_INIT_F
 371
 372 config TARGET_BG0900
 373         bool "Support bg0900"
 374         select CPU_ARM926EJS
 375         select SUPPORT_SPL
 376
 377 config TARGET_SANSA_FUZE_PLUS
 378         bool "Support sansa_fuze_plus"
 379         select CPU_ARM926EJS
 380         select SUPPORT_SPL
 381
 382 config TARGET_SC_SPS_1
 383         bool "Support sc_sps_1"
 384         select CPU_ARM926EJS
 385         select SUPPORT_SPL
 386
 387 config ORION5X
 388         bool "Marvell Orion"
 389         select CPU_ARM926EJS
 390
 391 config TARGET_SPEAR300
 392         bool "Support spear300"
 393         select CPU_ARM926EJS
 394         select BOARD_EARLY_INIT_F
 395
 396 config TARGET_SPEAR310
 397         bool "Support spear310"
 398         select CPU_ARM926EJS
 399         select BOARD_EARLY_INIT_F
 400
 401 config TARGET_SPEAR320
 402         bool "Support spear320"
 403         select CPU_ARM926EJS
 404         select BOARD_EARLY_INIT_F
 405
 406 config TARGET_SPEAR600
 407         bool "Support spear600"
 408         select CPU_ARM926EJS
 409         select BOARD_EARLY_INIT_F
 410
 411 config TARGET_STV0991
 412         bool "Support stv0991"
 413         select CPU_V7
 414         select DM
 415         select DM_SERIAL
 416         select DM_SPI
 417         select DM_SPI_FLASH
 418         select SPI_FLASH
 419
 420 config TARGET_X600
 421         bool "Support x600"
 422         select BOARD_LATE_INIT
 423         select CPU_ARM926EJS
 424         select SUPPORT_SPL
 425
 426 config TARGET_IMX31_PHYCORE
 427         bool "Support imx31_phycore_eet"
 428         select CPU_ARM1136
 429         select BOARD_EARLY_INIT_F
 430
 431 config TARGET_IMX31_PHYCORE_EET
 432         bool "Support imx31_phycore_eet"
 433         select BOARD_LATE_INIT
 434         select CPU_ARM1136
 435         select BOARD_EARLY_INIT_F
 436
 437 config TARGET_MX31ADS
 438         bool "Support mx31ads"
 439         select CPU_ARM1136
 440         select BOARD_EARLY_INIT_F
 441
 442 config TARGET_MX31PDK
 443         bool "Support mx31pdk"
 444         select BOARD_LATE_INIT
 445         select CPU_ARM1136
 446         select SUPPORT_SPL
 447         select BOARD_EARLY_INIT_F
 448
 449 config TARGET_WOODBURN
 450         bool "Support woodburn"
 451         select CPU_ARM1136
 452
 453 config TARGET_WOODBURN_SD
 454         bool "Support woodburn_sd"
 455         select CPU_ARM1136
 456         select SUPPORT_SPL
 457
 458 config TARGET_FLEA3
 459         bool "Support flea3"
 460         select CPU_ARM1136
 461
 462 config TARGET_MX35PDK
 463         bool "Support mx35pdk"
 464         select BOARD_LATE_INIT
 465         select CPU_ARM1136
 466
 467 config ARCH_BCM283X
 468         bool "Broadcom BCM283X family"
 469         select DM
 470         select DM_SERIAL
 471         select DM_GPIO
 472         select OF_CONTROL
 473
 474 config TARGET_VEXPRESS_CA15_TC2
 475         bool "Support vexpress_ca15_tc2"
 476         select CPU_V7
 477         select CPU_V7_HAS_NONSEC
 478         select CPU_V7_HAS_VIRT
 479
 480 config TARGET_VEXPRESS_CA5X2
 481         bool "Support vexpress_ca5x2"
 482         select CPU_V7
 483
 484 config TARGET_VEXPRESS_CA9X4
 485         bool "Support vexpress_ca9x4"
 486         select CPU_V7
 487
 488 config TARGET_BCM23550_W1D
 489         bool "Support bcm23550_w1d"
 490         select CPU_V7
 491
 492 config TARGET_BCM28155_AP
 493         bool "Support bcm28155_ap"
 494         select CPU_V7
 495
 496 config TARGET_BCMCYGNUS
 497         bool "Support bcmcygnus"
 498         select CPU_V7
 499
 500 config TARGET_BCMNSP
 501         bool "Support bcmnsp"
 502         select CPU_V7
 503
 504 config TARGET_BCMNS2
 505         bool "Support Broadcom Northstar2"
 506         select ARM64
 507         help
 508           Support for Broadcom Northstar 2 SoCs.  NS2 is a quad-core 64-bit
 509           ARMv8 Cortex-A57 processors targeting a broad range of networking
 510           applications
 511
 512 config ARCH_EXYNOS
 513         bool "Samsung EXYNOS"
 514         select DM
 515         select DM_I2C
 516         select DM_SPI_FLASH
 517         select DM_SERIAL
 518         select DM_SPI
 519         select DM_GPIO
 520         select DM_KEYBOARD
 521
 522 config ARCH_S5PC1XX
 523         bool "Samsung S5PC1XX"
 524         select CPU_V7
 525         select DM
 526         select DM_SERIAL
 527         select DM_GPIO
 528         select DM_I2C
 529
 530 config ARCH_HIGHBANK
 531         bool "Calxeda Highbank"
 532         select CPU_V7
 533
 534 config ARCH_INTEGRATOR
 535         bool "ARM Ltd. Integrator family"
 536         select DM
 537         select DM_SERIAL
 538
 539 config ARCH_KEYSTONE
 540         bool "TI Keystone"
 541         select CPU_V7
 542         select SUPPORT_SPL
 543         select SYS_THUMB_BUILD
 544         select CMD_POWEROFF
 545         imply FIT
 546
 547 config ARCH_OMAP2PLUS
 548         bool "TI OMAP2+"
 549         select CPU_V7
 550         select SUPPORT_SPL
 551         imply FIT
 552
 553 config ARCH_MESON
 554         bool "Amlogic Meson"
 555         help
 556           Support for the Meson SoC family developed by Amlogic Inc.,
 557           targeted at media players and tablet computers. We currently
 558           support the S905 (GXBaby) 64-bit SoC.
 559
 560 config ARCH_MX7ULP
 561         bool "NXP MX7ULP"
 562         select CPU_V7
 563         select ROM_UNIFIED_SECTIONS
 564
 565 config ARCH_MX7
 566         bool "Freescale MX7"
 567         select CPU_V7
 568         select SYS_FSL_HAS_SEC if SECURE_BOOT
 569         select SYS_FSL_SEC_COMPAT_4
 570         select SYS_FSL_SEC_LE
 571         select BOARD_EARLY_INIT_F
 572         select ARCH_MISC_INIT
 573
 574 config ARCH_MX6
 575         bool "Freescale MX6"
 576         select CPU_V7
 577         select SYS_FSL_HAS_SEC if SECURE_BOOT
 578         select SYS_FSL_SEC_COMPAT_4
 579         select SYS_FSL_SEC_LE
 580         select SYS_THUMB_BUILD if SPL
 581
 582 config ARCH_MX5
 583         bool "Freescale MX5"
 584         select CPU_V7
 585         select BOARD_EARLY_INIT_F
 586
 587 config ARCH_RMOBILE
 588         bool "Renesas ARM SoCs"
 589         select DM
 590         select DM_SERIAL
 591         select BOARD_EARLY_INIT_F
 592         imply SYS_THUMB_BUILD
 593
 594 config TARGET_S32V234EVB
 595         bool "Support s32v234evb"
 596         select ARM64
 597         select SYS_FSL_ERRATUM_ESDHC111
 598
 599 config ARCH_SNAPDRAGON
 600         bool "Qualcomm Snapdragon SoCs"
 601         select ARM64
 602         select DM
 603         select DM_GPIO
 604         select DM_SERIAL
 605         select SPMI
 606         select OF_CONTROL
 607         select OF_SEPARATE
 608
 609 config ARCH_SOCFPGA
 610         bool "Altera SOCFPGA family"
 611         select CPU_V7
 612         select SUPPORT_SPL
 613         select OF_CONTROL
 614         select SPL_OF_CONTROL
 615         select DM
 616         select DM_SPI_FLASH
 617         select DM_SPI
 618         select ENABLE_ARM_SOC_BOOT0_HOOK
 619         select ARCH_EARLY_INIT_R
 620         select ARCH_MISC_INIT
 621         select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 622         select SYS_THUMB_BUILD
 623
 624 config ARCH_SUNXI
 625         bool "Support sunxi (Allwinner) SoCs"
 626         select CMD_GPIO
 627         select CMD_MMC if MMC
 628         select CMD_USB if DISTRO_DEFAULTS
 629         select DM
 630         select DM_ETH
 631         select DM_GPIO
 632         select DM_KEYBOARD
 633         select DM_SERIAL
 634         select DM_USB if DISTRO_DEFAULTS
 635         select OF_BOARD_SETUP
 636         select OF_CONTROL
 637         select OF_SEPARATE
 638         select SPL_STACK_R if SUPPORT_SPL
 639         select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
 640         select SYS_NS16550
 641         select SPL_SYS_THUMB_BUILD if !ARM64
 642         select USB if DISTRO_DEFAULTS
 643         select USB_STORAGE if DISTRO_DEFAULTS
 644         select USB_KEYBOARD if DISTRO_DEFAULTS
 645         select USE_TINY_PRINTF
 646
 647 config TARGET_TS4600
 648         bool "Support TS4600"
 649         select CPU_ARM926EJS
 650         select SUPPORT_SPL
 651
 652 config ARCH_VF610
 653         bool "Freescale Vybrid"
 654         select CPU_V7
 655         select SYS_FSL_ERRATUM_ESDHC111
 656
 657 config ARCH_ZYNQ
 658         bool "Xilinx Zynq Platform"
 659         select BOARD_LATE_INIT
 660         select CPU_V7
 661         select SUPPORT_SPL
 662         select OF_CONTROL
 663         select SPL_OF_CONTROL if SPL
 664         select DM
 665         select DM_ETH
 666         select DM_GPIO
 667         select SPL_DM if SPL
 668         select DM_MMC
 669         select DM_MMC_OPS
 670         select DM_SPI
 671         select DM_SERIAL
 672         select DM_SPI_FLASH
 673         select SPL_SEPARATE_BSS if SPL
 674         select DM_USB if USB
 675         select BLK
 676         select CLK
 677         select SPL_CLK
 678         select CLK_ZYNQ
 679         imply CMD_CLK
 680
 681 config ARCH_ZYNQMP
 682         bool "Support Xilinx ZynqMP Platform"
 683         select ARM64
 684         select BOARD_LATE_INIT
 685         select DM
 686         select OF_CONTROL
 687         select DM_SERIAL
 688         select SUPPORT_SPL
 689         select CLK
 690         select SPL_CLK
 691         select DM_USB if USB
 692
 693 config TEGRA
 694         bool "NVIDIA Tegra"
 695
 696 config TARGET_VEXPRESS64_AEMV8A
 697         bool "Support vexpress_aemv8a"
 698         select ARM64
 699
 700 config TARGET_VEXPRESS64_BASE_FVP
 701         bool "Support Versatile Express ARMv8a FVP BASE model"
 702         select ARM64
 703         select SEMIHOSTING
 704
 705 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 706         bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 707         select ARM64
 708         help
 709           This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 710           the default config to allow the user to load the images directly into
 711           DRAM using model parameters rather than by using semi-hosting to load
 712           the files from the host filesystem.
 713
 714 config TARGET_VEXPRESS64_JUNO
 715         bool "Support Versatile Express Juno Development Platform"
 716         select ARM64
 717
 718 config TARGET_LS2080A_EMU
 719         bool "Support ls2080a_emu"
 720         select ARCH_LS2080A
 721         select ARM64
 722         select ARMV8_MULTIENTRY
 723         select ARCH_MISC_INIT
 724         help
 725           Support for Freescale LS2080A_EMU platform
 726           The LS2080A Development System (EMULATOR) is a pre silicon
 727           development platform that supports the QorIQ LS2080A
 728           Layerscape Architecture processor.
 729
 730 config TARGET_LS2080A_SIMU
 731         bool "Support ls2080a_simu"
 732         select ARCH_LS2080A
 733         select ARM64
 734         select ARMV8_MULTIENTRY
 735         select ARCH_MISC_INIT
 736         help
 737           Support for Freescale LS2080A_SIMU platform
 738           The LS2080A Development System (QDS) is a pre silicon
 739           development platform that supports the QorIQ LS2080A
 740           Layerscape Architecture processor.
 741
 742 config TARGET_LS2080AQDS
 743         bool "Support ls2080aqds"
 744         select ARCH_LS2080A
 745         select ARM64
 746         select ARMV8_MULTIENTRY
 747         select BOARD_LATE_INIT
 748         select SUPPORT_SPL
 749         select ARCH_MISC_INIT
 750         help
 751           Support for Freescale LS2080AQDS platform
 752           The LS2080A Development System (QDS) is a high-performance
 753           development platform that supports the QorIQ LS2080A
 754           Layerscape Architecture processor.
 755
 756 config TARGET_LS2080ARDB
 757         bool "Support ls2080ardb"
 758         select ARCH_LS2080A
 759         select ARM64
 760         select ARMV8_MULTIENTRY
 761         select BOARD_LATE_INIT
 762         select SUPPORT_SPL
 763         select ARCH_MISC_INIT
 764         help
 765           Support for Freescale LS2080ARDB platform.
 766           The LS2080A Reference design board (RDB) is a high-performance
 767           development platform that supports the QorIQ LS2080A
 768           Layerscape Architecture processor.
 769
 770 config TARGET_HIKEY
 771         bool "Support HiKey 96boards Consumer Edition Platform"
 772         select ARM64
 773         select DM
 774         select DM_GPIO
 775         select DM_SERIAL
 776         select OF_CONTROL
 777           help
 778           Support for HiKey 96boards platform. It features a HI6220
 779           SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
 780
 781 config TARGET_LS1012AQDS
 782         bool "Support ls1012aqds"
 783         select ARCH_LS1012A
 784         select ARM64
 785         select BOARD_LATE_INIT
 786         help
 787           Support for Freescale LS1012AQDS platform.
 788           The LS1012A Development System (QDS) is a high-performance
 789           development platform that supports the QorIQ LS1012A
 790           Layerscape Architecture processor.
 791
 792 config TARGET_LS1012ARDB
 793         bool "Support ls1012ardb"
 794         select ARCH_LS1012A
 795         select ARM64
 796         select BOARD_LATE_INIT
 797         help
 798           Support for Freescale LS1012ARDB platform.
 799           The LS1012A Reference design board (RDB) is a high-performance
 800           development platform that supports the QorIQ LS1012A
 801           Layerscape Architecture processor.
 802
 803 config TARGET_LS1012AFRDM
 804         bool "Support ls1012afrdm"
 805         select ARCH_LS1012A
 806         select ARM64
 807         help
 808           Support for Freescale LS1012AFRDM platform.
 809           The LS1012A Freedom  board (FRDM) is a high-performance
 810           development platform that supports the QorIQ LS1012A
 811           Layerscape Architecture processor.
 812
 813 config TARGET_LS1021AQDS
 814         bool "Support ls1021aqds"
 815         select BOARD_LATE_INIT
 816         select CPU_V7
 817         select CPU_V7_HAS_NONSEC
 818         select CPU_V7_HAS_VIRT
 819         select SUPPORT_SPL
 820         select ARCH_LS1021A
 821         select ARCH_SUPPORT_PSCI
 822         select LS1_DEEP_SLEEP
 823         select SYS_FSL_DDR
 824         select BOARD_EARLY_INIT_F
 825
 826 config TARGET_LS1021ATWR
 827         bool "Support ls1021atwr"
 828         select BOARD_LATE_INIT
 829         select CPU_V7
 830         select CPU_V7_HAS_NONSEC
 831         select CPU_V7_HAS_VIRT
 832         select SUPPORT_SPL
 833         select ARCH_LS1021A
 834         select ARCH_SUPPORT_PSCI
 835         select LS1_DEEP_SLEEP
 836         select BOARD_EARLY_INIT_F
 837
 838 config TARGET_LS1021AIOT
 839         bool "Support ls1021aiot"
 840         select BOARD_LATE_INIT
 841         select CPU_V7
 842         select CPU_V7_HAS_NONSEC
 843         select CPU_V7_HAS_VIRT
 844         select SUPPORT_SPL
 845         select ARCH_LS1021A
 846         select ARCH_SUPPORT_PSCI
 847         help
 848           Support for Freescale LS1021AIOT platform.
 849           The LS1021A Freescale board (IOT) is a high-performance
 850           development platform that supports the QorIQ LS1021A
 851           Layerscape Architecture processor.
 852
 853 config TARGET_LS1043AQDS
 854         bool "Support ls1043aqds"
 855         select ARCH_LS1043A
 856         select ARM64
 857         select ARMV8_MULTIENTRY
 858         select BOARD_LATE_INIT
 859         select SUPPORT_SPL
 860         select BOARD_EARLY_INIT_F
 861         help
 862           Support for Freescale LS1043AQDS platform.
 863
 864 config TARGET_LS1043ARDB
 865         bool "Support ls1043ardb"
 866         select ARCH_LS1043A
 867         select ARM64
 868         select ARMV8_MULTIENTRY
 869         select BOARD_LATE_INIT
 870         select SUPPORT_SPL
 871         select BOARD_EARLY_INIT_F
 872         help
 873           Support for Freescale LS1043ARDB platform.
 874
 875 config TARGET_LS1046AQDS
 876         bool "Support ls1046aqds"
 877         select ARCH_LS1046A
 878         select ARM64
 879         select ARMV8_MULTIENTRY
 880         select BOARD_LATE_INIT
 881         select SUPPORT_SPL
 882         select DM_SPI_FLASH if DM_SPI
 883         select BOARD_EARLY_INIT_F
 884         help
 885           Support for Freescale LS1046AQDS platform.
 886           The LS1046A Development System (QDS) is a high-performance
 887           development platform that supports the QorIQ LS1046A
 888           Layerscape Architecture processor.
 889
 890 config TARGET_LS1046ARDB
 891         bool "Support ls1046ardb"
 892         select ARCH_LS1046A
 893         select ARM64
 894         select ARMV8_MULTIENTRY
 895         select BOARD_LATE_INIT
 896         select SUPPORT_SPL
 897         select DM_SPI_FLASH if DM_SPI
 898         select POWER_MC34VR500
 899         select BOARD_EARLY_INIT_F
 900         help
 901           Support for Freescale LS1046ARDB platform.
 902           The LS1046A Reference Design Board (RDB) is a high-performance
 903           development platform that supports the QorIQ LS1046A
 904           Layerscape Architecture processor.
 905
 906 config TARGET_H2200
 907         bool "Support h2200"
 908         select CPU_PXA
 909
 910 config TARGET_ZIPITZ2
 911         bool "Support zipitz2"
 912         select CPU_PXA
 913
 914 config TARGET_COLIBRI_PXA270
 915         bool "Support colibri_pxa270"
 916         select CPU_PXA
 917
 918 config ARCH_UNIPHIER
 919         bool "Socionext UniPhier SoCs"
 920         select BOARD_LATE_INIT
 921         select CLK_UNIPHIER
 922         select DM
 923         select DM_GPIO
 924         select DM_I2C
 925         select DM_MMC
 926         select DM_RESET
 927         select DM_SERIAL
 928         select DM_USB
 929         select OF_CONTROL
 930         select OF_LIBFDT
 931         select PINCTRL
 932         select SPL_DM if SPL
 933         select SPL_LIBCOMMON_SUPPORT if SPL
 934         select SPL_LIBGENERIC_SUPPORT if SPL
 935         select SPL_OF_CONTROL if SPL
 936         select SPL_PINCTRL if SPL
 937         select SUPPORT_SPL
 938         help
 939           Support for UniPhier SoC family developed by Socionext Inc.
 940           (formerly, System LSI Business Division of Panasonic Corporation)
 941
 942 config STM32
 943         bool "Support STM32"
 944         select CPU_V7M
 945         select DM
 946         select DM_SERIAL
 947         select SYS_THUMB_BUILD
 948
 949 config ARCH_STI
 950         bool "Support STMicrolectronics SoCs"
 951         select CPU_V7
 952         select DM
 953         select DM_SERIAL
 954         select BLK
 955         select DM_MMC
 956         select DM_RESET
 957         help
 958           Support for STMicroelectronics STiH407/10 SoC family.
 959           This SoC is used on Linaro 96Board STiH410-B2260
 960
 961 config ARCH_ROCKCHIP
 962         bool "Support Rockchip SoCs"
 963         select OF_CONTROL
 964         select BLK
 965         select DM
 966         select SPL_DM if SPL
 967         select SYS_MALLOC_F
 968         select SYS_THUMB_BUILD if !ARM64
 969         select SPL_SYS_MALLOC_SIMPLE if SPL
 970         select DM_GPIO
 971         select DM_I2C
 972         select DM_MMC
 973         select DM_MMC_OPS
 974         select DM_SERIAL
 975         select DM_SPI
 976         select DM_SPI_FLASH
 977         select DM_USB if USB
 978         select DM_PWM
 979         select DM_REGULATOR
 980
 981 config TARGET_THUNDERX_88XX
 982         bool "Support ThunderX 88xx"
 983         select ARM64
 984         select OF_CONTROL
 985         select SYS_CACHE_SHIFT_7
 986
 987 config ARCH_ASPEED
 988         bool "Support Aspeed SoCs"
 989         select OF_CONTROL
 990         select DM
 991
 992 endchoice
 993
 994 source "arch/arm/mach-aspeed/Kconfig"
 995
 996 source "arch/arm/mach-at91/Kconfig"
 997
 998 source "arch/arm/mach-bcm283x/Kconfig"
 999
1000 source "arch/arm/mach-davinci/Kconfig"
1001
1002 source "arch/arm/mach-exynos/Kconfig"
1003
1004 source "arch/arm/mach-highbank/Kconfig"
1005
1006 source "arch/arm/mach-integrator/Kconfig"
1007
1008 source "arch/arm/mach-keystone/Kconfig"
1009
1010 source "arch/arm/mach-kirkwood/Kconfig"
1011
1012 source "arch/arm/mach-mvebu/Kconfig"
1013
1014 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1015
1016 source "arch/arm/cpu/armv7/mx7ulp/Kconfig"
1017
1018 source "arch/arm/cpu/armv7/mx7/Kconfig"
1019
1020 source "arch/arm/cpu/armv7/mx6/Kconfig"
1021
1022 source "arch/arm/cpu/armv7/mx5/Kconfig"
1023
1024 source "arch/arm/mach-omap2/Kconfig"
1025
1026 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1027
1028 source "arch/arm/mach-orion5x/Kconfig"
1029
1030 source "arch/arm/mach-rmobile/Kconfig"
1031
1032 source "arch/arm/mach-meson/Kconfig"
1033
1034 source "arch/arm/mach-rockchip/Kconfig"
1035
1036 source "arch/arm/mach-s5pc1xx/Kconfig"
1037
1038 source "arch/arm/mach-snapdragon/Kconfig"
1039
1040 source "arch/arm/mach-socfpga/Kconfig"
1041
1042 source "arch/arm/mach-sti/Kconfig"
1043
1044 source "arch/arm/mach-stm32/Kconfig"
1045
1046 source "arch/arm/mach-tegra/Kconfig"
1047
1048 source "arch/arm/mach-uniphier/Kconfig"
1049
1050 source "arch/arm/cpu/armv7/vf610/Kconfig"
1051
1052 source "arch/arm/mach-zynq/Kconfig"
1053
1054 source "arch/arm/cpu/armv7/Kconfig"
1055
1056 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1057
1058 source "arch/arm/cpu/armv8/Kconfig"
1059
1060 source "arch/arm/imx-common/Kconfig"
1061
1062 source "board/aries/m28evk/Kconfig"
1063 source "board/bosch/shc/Kconfig"
1064 source "board/CarMediaLab/flea3/Kconfig"
1065 source "board/Marvell/aspenite/Kconfig"
1066 source "board/Marvell/gplugd/Kconfig"
1067 source "board/armadeus/apf27/Kconfig"
1068 source "board/armltd/vexpress/Kconfig"
1069 source "board/armltd/vexpress64/Kconfig"
1070 source "board/bluegiga/apx4devkit/Kconfig"
1071 source "board/broadcom/bcm23550_w1d/Kconfig"
1072 source "board/broadcom/bcm28155_ap/Kconfig"
1073 source "board/broadcom/bcmcygnus/Kconfig"
1074 source "board/broadcom/bcmnsp/Kconfig"
1075 source "board/broadcom/bcmns2/Kconfig"
1076 source "board/cavium/thunderx/Kconfig"
1077 source "board/cirrus/edb93xx/Kconfig"
1078 source "board/creative/xfi3/Kconfig"
1079 source "board/freescale/ls2080a/Kconfig"
1080 source "board/freescale/ls2080aqds/Kconfig"
1081 source "board/freescale/ls2080ardb/Kconfig"
1082 source "board/freescale/ls1021aqds/Kconfig"
1083 source "board/freescale/ls1043aqds/Kconfig"
1084 source "board/freescale/ls1021atwr/Kconfig"
1085 source "board/freescale/ls1021aiot/Kconfig"
1086 source "board/freescale/ls1046aqds/Kconfig"
1087 source "board/freescale/ls1043ardb/Kconfig"
1088 source "board/freescale/ls1046ardb/Kconfig"
1089 source "board/freescale/ls1012aqds/Kconfig"
1090 source "board/freescale/ls1012ardb/Kconfig"
1091 source "board/freescale/ls1012afrdm/Kconfig"
1092 source "board/freescale/mx23evk/Kconfig"
1093 source "board/freescale/mx25pdk/Kconfig"
1094 source "board/freescale/mx28evk/Kconfig"
1095 source "board/freescale/mx31ads/Kconfig"
1096 source "board/freescale/mx31pdk/Kconfig"
1097 source "board/freescale/mx35pdk/Kconfig"
1098 source "board/freescale/s32v234evb/Kconfig"
1099 source "board/gdsys/a38x/Kconfig"
1100 source "board/grinn/chiliboard/Kconfig"
1101 source "board/gumstix/pepper/Kconfig"
1102 source "board/h2200/Kconfig"
1103 source "board/hisilicon/hikey/Kconfig"
1104 source "board/imx31_phycore/Kconfig"
1105 source "board/isee/igep0033/Kconfig"
1106 source "board/olimex/mx23_olinuxino/Kconfig"
1107 source "board/phytec/pcm051/Kconfig"
1108 source "board/ppcag/bg0900/Kconfig"
1109 source "board/sandisk/sansa_fuze_plus/Kconfig"
1110 source "board/schulercontrol/sc_sps_1/Kconfig"
1111 source "board/silica/pengwyn/Kconfig"
1112 source "board/spear/spear300/Kconfig"
1113 source "board/spear/spear310/Kconfig"
1114 source "board/spear/spear320/Kconfig"
1115 source "board/spear/spear600/Kconfig"
1116 source "board/spear/x600/Kconfig"
1117 source "board/st/stv0991/Kconfig"
1118 source "board/sunxi/Kconfig"
1119 source "board/syteco/zmx25/Kconfig"
1120 source "board/tcl/sl50/Kconfig"
1121 source "board/birdland/bav335x/Kconfig"
1122 source "board/timll/devkit3250/Kconfig"
1123 source "board/toradex/colibri_pxa270/Kconfig"
1124 source "board/technologic/ts4600/Kconfig"
1125 source "board/vscom/baltos/Kconfig"
1126 source "board/woodburn/Kconfig"
1127 source "board/work-microwave/work_92105/Kconfig"
1128 source "board/zipitz2/Kconfig"
1129
1130 source "arch/arm/Kconfig.debug"
1131
1132 endmenu