arch/arm/cpu/armv8/zynqmp/Kconfig

   1 if ARCH_ZYNQMP
   2
   3 config SPL_FAT_SUPPORT
   4         default y
   5
   6 config SPL_LIBCOMMON_SUPPORT
   7         default y
   8
   9 config SPL_LIBDISK_SUPPORT
  10         default y
  11
  12 config SPL_LIBGENERIC_SUPPORT
  13         default y
  14
  15 config SPL_MMC_SUPPORT
  16         default y if MMC_SDHCI_ZYNQ
  17
  18 config SPL_SERIAL_SUPPORT
  19         default y
  20
  21 config SPL_SPI_FLASH_SUPPORT
  22         default y if ZYNQ_QSPI
  23
  24 config SPL_SPI_SUPPORT
  25         default y if ZYNQ_QSPI
  26
  27 config SYS_BOARD
  28         default "zynqmp"
  29
  30 config SYS_VENDOR
  31         string "Vendor name"
  32         default "xilinx"
  33
  34 config SYS_SOC
  35         default "zynqmp"
  36
  37 config SYS_CONFIG_NAME
  38         string "Board configuration name"
  39         default "xilinx_zynqmp"
  40         help
  41           This option contains information about board configuration name.
  42           Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
  43           will be used for board configuration.
  44
  45 config SYS_MEM_RSVD_FOR_MMU
  46         bool "Reserve memory for MMU Table"
  47         help
  48           If defined this option is used to setup different space for
  49           MMU table than the one which will be allocated during
  50           relocation.
  51
  52 config BOOT_INIT_FILE
  53         string "boot.bin init register filename"
  54         depends on SPL
  55         default ""
  56         help
  57           Add register writes to boot.bin format (max 256 pairs).
  58           Expect a table of register-value pairs, e.g. "0x12345678 0x4321"
  59
  60 config PMUFW_INIT_FILE
  61         string "PMU firmware"
  62         depends on SPL
  63         default ""
  64         help
  65           Include external PMUFW (Platform Management Unit FirmWare) to
  66           a Xilinx bootable image (boot.bin).
  67
  68 config ZYNQMP_USB
  69         bool "Configure ZynqMP USB"
  70
  71 config SYS_MALLOC_F_LEN
  72         default 0x600
  73
  74 config DEFINE_TCM_OCM_MMAP
  75         bool "Define TCM and OCM memory in MMU Table"
  76         default y if MP
  77         help
  78           This option if enabled defines the TCM and OCM memory and its
  79           memory attributes in MMU table entry.
  80
  81 config ZYNQMP_PSU_INIT_ENABLED
  82         bool "Include psu_init"
  83         help
  84           Include psu_init to full u-boot. SPL include psu_init by default.
  85
  86 config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
  87         bool "Overwrite SPL bootmode"
  88         depends on SPL
  89         help
  90           Overwrite bootmode selected via boot mode pins to tell SPL what should
  91           be the next boot device.
  92
  93 config SPL_ZYNQMP_ALT_BOOTMODE
  94         hex
  95         default 0x0 if JTAG_MODE
  96         default 0x1 if QSPI_MODE_24BIT
  97         default 0x2 if QSPI_MODE_32BIT
  98         default 0x3 if SD_MODE
  99         default 0x4 if NAND_MODE
 100         default 0x5 if SD_MODE1
 101         default 0x6 if EMMC_MODE
 102         default 0x7 if USB_MODE
 103         default 0xa if SW_USBHOST_MODE
 104         default 0xb if SW_SATA_MODE
 105         default 0xe if SD1_LSHFT_MODE
 106
 107 choice
 108         prompt "Boot mode"
 109         depends on SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
 110         default JTAG
 111
 112 config JTAG_MODE
 113         bool "JTAG_MODE"
 114
 115 config QSPI_MODE_24BIT
 116         bool "QSPI_MODE_24BIT"
 117
 118 config QSPI_MODE_32BIT
 119         bool "QSPI_MODE_32BIT"
 120
 121 config SD_MODE
 122         bool "SD_MODE"
 123
 124 config SD_MODE1
 125         bool "SD_MODE1"
 126
 127 config NAND_MODE
 128         bool "NAND_MODE"
 129
 130 config EMMC_MODE
 131         bool "EMMC_MODE"
 132
 133 config USB_MODE
 134         bool "USB"
 135
 136 config SW_USBHOST_MODE
 137         bool "SW USBHOST_MODE"
 138
 139 config SW_SATA_MODE
 140         bool "SW SATA_MODE"
 141
 142 config SD1_LSHFT_MODE
 143         bool "SD1_LSHFT_MODE"
 144
 145 endchoice
 146
 147 endif