arch/arm/dts/am57xx-beagle-x15.dts

   1 /*
   2  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "dra74x.dtsi"
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/interrupt-controller/irq.h>
  13
  14 / {
  15         model = "TI AM5728 BeagleBoard-X15";
  16         compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
  17
  18         chosen {
  19                 stdout-path = &uart3;
  20         };
  21
  22         aliases {
  23                 rtc0 = &mcp_rtc;
  24                 rtc1 = &tps659038_rtc;
  25                 rtc2 = &rtc;
  26                 display0 = &hdmi0;
  27         };
  28
  29         memory {
  30                 device_type = "memory";
  31                 reg = <0x80000000 0x80000000>;
  32         };
  33
  34         vdd_3v3: fixedregulator-vdd_3v3 {
  35                 compatible = "regulator-fixed";
  36                 regulator-name = "vdd_3v3";
  37                 vin-supply = <&regen1>;
  38                 regulator-min-microvolt = <3300000>;
  39                 regulator-max-microvolt = <3300000>;
  40         };
  41
  42         vtt_fixed: fixedregulator-vtt {
  43                 /* TPS51200 */
  44                 compatible = "regulator-fixed";
  45                 regulator-name = "vtt_fixed";
  46                 vin-supply = <&smps3_reg>;
  47                 regulator-min-microvolt = <3300000>;
  48                 regulator-max-microvolt = <3300000>;
  49                 regulator-always-on;
  50                 regulator-boot-on;
  51                 enable-active-high;
  52                 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
  53         };
  54
  55         leds {
  56                 compatible = "gpio-leds";
  57                 pinctrl-names = "default";
  58                 pinctrl-0 = <&leds_pins_default>;
  59
  60                 led@0 {
  61                         label = "beagle-x15:usr0";
  62                         gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
  63                         linux,default-trigger = "heartbeat";
  64                         default-state = "off";
  65                 };
  66
  67                 led@1 {
  68                         label = "beagle-x15:usr1";
  69                         gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
  70                         linux,default-trigger = "cpu0";
  71                         default-state = "off";
  72                 };
  73
  74                 led@2 {
  75                         label = "beagle-x15:usr2";
  76                         gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
  77                         linux,default-trigger = "mmc0";
  78                         default-state = "off";
  79                 };
  80
  81                 led@3 {
  82                         label = "beagle-x15:usr3";
  83                         gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
  84                         linux,default-trigger = "ide-disk";
  85                         default-state = "off";
  86                 };
  87         };
  88
  89         gpio_fan: gpio_fan {
  90                 /* Based on 5v 500mA AFB02505HHB */
  91                 compatible = "gpio-fan";
  92                 gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
  93                 gpio-fan,speed-map = <0     0>,
  94                                      <13000 1>;
  95                 #cooling-cells = <2>;
  96         };
  97
  98         extcon_usb1: extcon_usb1 {
  99                 compatible = "linux,extcon-usb-gpio";
 100                 id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
 101                 pinctrl-names = "default";
 102                 pinctrl-0 = <&extcon_usb1_pins>;
 103         };
 104
 105         extcon_usb2: extcon_usb2 {
 106                 compatible = "linux,extcon-usb-gpio";
 107                 id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
 108                 pinctrl-names = "default";
 109                 pinctrl-0 = <&extcon_usb2_pins>;
 110         };
 111
 112         hdmi0: connector {
 113                 compatible = "hdmi-connector";
 114                 label = "hdmi";
 115
 116                 type = "a";
 117
 118                 port {
 119                         hdmi_connector_in: endpoint {
 120                                 remote-endpoint = <&tpd12s015_out>;
 121                         };
 122                 };
 123         };
 124
 125         tpd12s015: encoder {
 126                 compatible = "ti,tpd12s015";
 127
 128                 pinctrl-names = "default";
 129                 pinctrl-0 = <&tpd12s015_pins>;
 130
 131                 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,   /* gpio7_10, CT CP HPD */
 132                         <&gpio6 28 GPIO_ACTIVE_HIGH>,   /* gpio6_28, LS OE */
 133                         <&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
 134
 135                 ports {
 136                         #address-cells = <1>;
 137                         #size-cells = <0>;
 138
 139                         port@0 {
 140                                 reg = <0>;
 141
 142                                 tpd12s015_in: endpoint {
 143                                         remote-endpoint = <&hdmi_out>;
 144                                 };
 145                         };
 146
 147                         port@1 {
 148                                 reg = <1>;
 149
 150                                 tpd12s015_out: endpoint {
 151                                         remote-endpoint = <&hdmi_connector_in>;
 152                                 };
 153                         };
 154                 };
 155         };
 156 };
 157
 158 &dra7_pmx_core {
 159         leds_pins_default: leds_pins_default {
 160                 pinctrl-single,pins = <
 161                         0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
 162                         0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
 163                         0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
 164                         0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
 165                 >;
 166         };
 167
 168         i2c1_pins_default: i2c1_pins_default {
 169                 pinctrl-single,pins = <
 170                         0x400 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.sda */
 171                         0x404 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.scl */
 172                 >;
 173         };
 174
 175         hdmi_pins: pinmux_hdmi_pins {
 176                 pinctrl-single,pins = <
 177                         0x408 (PIN_INPUT | MUX_MODE1)   /* i2c2_sda.hdmi1_ddc_scl */
 178                         0x40c (PIN_INPUT | MUX_MODE1)   /* i2c2_scl.hdmi1_ddc_sda */
 179                 >;
 180         };
 181
 182         i2c3_pins_default: i2c3_pins_default {
 183                 pinctrl-single,pins = <
 184                         0x2a4 (PIN_INPUT| MUX_MODE10)   /* mcasp1_aclkx.i2c3_sda */
 185                         0x2a8 (PIN_INPUT| MUX_MODE10)   /* mcasp1_fsx.i2c3_scl */
 186                 >;
 187         };
 188
 189         uart3_pins_default: uart3_pins_default {
 190                 pinctrl-single,pins = <
 191                         0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
 192                         0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 193                 >;
 194         };
 195
 196         mmc1_pins_default: mmc1_pins_default {
 197                 pinctrl-single,pins = <
 198                         0x36c (PIN_INPUT | MUX_MODE14)  /* mmc1sdcd.gpio219 */
 199                         0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
 200                         0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
 201                         0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
 202                         0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
 203                         0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
 204                         0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
 205                 >;
 206         };
 207
 208         mmc2_pins_default: mmc2_pins_default {
 209                 pinctrl-single,pins = <
 210                         0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
 211                         0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
 212                         0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
 213                         0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
 214                         0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
 215                         0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
 216                         0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
 217                         0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
 218                         0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
 219                         0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 220                 >;
 221         };
 222
 223         cpsw_pins_default: cpsw_pins_default {
 224                 pinctrl-single,pins = <
 225                         /* Slave 1 */
 226                         0x250 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_tclk */
 227                         0x254 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_tctl */
 228                         0x258 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td3 */
 229                         0x25c (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td2 */
 230                         0x260 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td1 */
 231                         0x264 (PIN_OUTPUT | MUX_MODE0)  /* rgmii1_td0 */
 232                         0x268 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rclk */
 233                         0x26c (PIN_INPUT | MUX_MODE0)   /* rgmii1_rctl */
 234                         0x270 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd3 */
 235                         0x274 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd2 */
 236                         0x278 (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd1 */
 237                         0x27c (PIN_INPUT | MUX_MODE0)   /* rgmii1_rd0 */
 238
 239                         /* Slave 2 */
 240                         0x198 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_tclk */
 241                         0x19c (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_tctl */
 242                         0x1a0 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td3 */
 243                         0x1a4 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td2 */
 244                         0x1a8 (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td1 */
 245                         0x1ac (PIN_OUTPUT | MUX_MODE3)  /* rgmii2_td0 */
 246                         0x1b0 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rclk */
 247                         0x1b4 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rctl */
 248                         0x1b8 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd3 */
 249                         0x1bc (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd2 */
 250                         0x1c0 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd1 */
 251                         0x1c4 (PIN_INPUT | MUX_MODE3)   /* rgmii2_rd0 */
 252                 >;
 253
 254         };
 255
 256         cpsw_pins_sleep: cpsw_pins_sleep {
 257                 pinctrl-single,pins = <
 258                         /* Slave 1 */
 259                         0x250 (PIN_INPUT | MUX_MODE15)
 260                         0x254 (PIN_INPUT | MUX_MODE15)
 261                         0x258 (PIN_INPUT | MUX_MODE15)
 262                         0x25c (PIN_INPUT | MUX_MODE15)
 263                         0x260 (PIN_INPUT | MUX_MODE15)
 264                         0x264 (PIN_INPUT | MUX_MODE15)
 265                         0x268 (PIN_INPUT | MUX_MODE15)
 266                         0x26c (PIN_INPUT | MUX_MODE15)
 267                         0x270 (PIN_INPUT | MUX_MODE15)
 268                         0x274 (PIN_INPUT | MUX_MODE15)
 269                         0x278 (PIN_INPUT | MUX_MODE15)
 270                         0x27c (PIN_INPUT | MUX_MODE15)
 271
 272                         /* Slave 2 */
 273                         0x198 (PIN_INPUT | MUX_MODE15)
 274                         0x19c (PIN_INPUT | MUX_MODE15)
 275                         0x1a0 (PIN_INPUT | MUX_MODE15)
 276                         0x1a4 (PIN_INPUT | MUX_MODE15)
 277                         0x1a8 (PIN_INPUT | MUX_MODE15)
 278                         0x1ac (PIN_INPUT | MUX_MODE15)
 279                         0x1b0 (PIN_INPUT | MUX_MODE15)
 280                         0x1b4 (PIN_INPUT | MUX_MODE15)
 281                         0x1b8 (PIN_INPUT | MUX_MODE15)
 282                         0x1bc (PIN_INPUT | MUX_MODE15)
 283                         0x1c0 (PIN_INPUT | MUX_MODE15)
 284                         0x1c4 (PIN_INPUT | MUX_MODE15)
 285                 >;
 286         };
 287
 288         davinci_mdio_pins_default: davinci_mdio_pins_default {
 289                 pinctrl-single,pins = <
 290                         /* MDIO */
 291                         0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* mdio_mclk */
 292                         0x240 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mdio_d */
 293                 >;
 294         };
 295
 296         davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
 297                 pinctrl-single,pins = <
 298                         0x23c (PIN_INPUT | MUX_MODE15)
 299                         0x240 (PIN_INPUT | MUX_MODE15)
 300                 >;
 301         };
 302
 303         tps659038_pins_default: tps659038_pins_default {
 304                 pinctrl-single,pins = <
 305                         0x418 (PIN_INPUT_PULLUP | MUX_MODE14)   /* wakeup0.gpio1_0 */
 306                 >;
 307         };
 308
 309         tmp102_pins_default: tmp102_pins_default {
 310                 pinctrl-single,pins = <
 311                         0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14)   /* spi2_d0.gpio7_16 */
 312                 >;
 313         };
 314
 315         mcp79410_pins_default: mcp79410_pins_default {
 316                 pinctrl-single,pins = <
 317                         0x424 (PIN_INPUT_PULLUP | MUX_MODE1)    /* wakeup3.sys_nirq1 */
 318                 >;
 319         };
 320
 321         usb1_pins: pinmux_usb1_pins {
 322                 pinctrl-single,pins = <
 323                         0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 324                 >;
 325         };
 326
 327         extcon_usb1_pins: extcon_usb1_pins {
 328                 pinctrl-single,pins = <
 329                         0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
 330                 >;
 331         };
 332
 333         extcon_usb2_pins: extcon_usb2_pins {
 334                 pinctrl-single,pins = <
 335                         0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
 336                 >;
 337         };
 338
 339         tpd12s015_pins: pinmux_tpd12s015_pins {
 340                 pinctrl-single,pins = <
 341                         0x3b0 (PIN_OUTPUT | MUX_MODE14)         /* gpio7_10 CT_CP_HPD */
 342                         0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
 343                         0x370 (PIN_OUTPUT | MUX_MODE14)         /* gpio6_28 LS_OE */
 344                 >;
 345         };
 346 };
 347
 348 &i2c1 {
 349         status = "okay";
 350         pinctrl-names = "default";
 351         pinctrl-0 = <&i2c1_pins_default>;
 352         clock-frequency = <400000>;
 353
 354         tps659038: tps659038@58 {
 355                 compatible = "ti,tps659038";
 356                 reg = <0x58>;
 357                 interrupt-parent = <&gpio1>;
 358                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 359
 360                 pinctrl-names = "default";
 361                 pinctrl-0 = <&tps659038_pins_default>;
 362
 363                 #interrupt-cells = <2>;
 364                 interrupt-controller;
 365
 366                 ti,system-power-controller;
 367
 368                 tps659038_pmic {
 369                         compatible = "ti,tps659038-pmic";
 370
 371                         regulators {
 372                                 smps12_reg: smps12 {
 373                                         /* VDD_MPU */
 374                                         regulator-name = "smps12";
 375                                         regulator-min-microvolt = < 850000>;
 376                                         regulator-max-microvolt = <1250000>;
 377                                         regulator-always-on;
 378                                         regulator-boot-on;
 379                                 };
 380
 381                                 smps3_reg: smps3 {
 382                                         /* VDD_DDR */
 383                                         regulator-name = "smps3";
 384                                         regulator-min-microvolt = <1350000>;
 385                                         regulator-max-microvolt = <1350000>;
 386                                         regulator-always-on;
 387                                         regulator-boot-on;
 388                                 };
 389
 390                                 smps45_reg: smps45 {
 391                                         /* VDD_DSPEVE, VDD_IVA, VDD_GPU */
 392                                         regulator-name = "smps45";
 393                                         regulator-min-microvolt = < 850000>;
 394                                         regulator-max-microvolt = <1150000>;
 395                                         regulator-always-on;
 396                                         regulator-boot-on;
 397                                 };
 398
 399                                 smps6_reg: smps6 {
 400                                         /* VDD_CORE */
 401                                         regulator-name = "smps6";
 402                                         regulator-min-microvolt = <850000>;
 403                                         regulator-max-microvolt = <1030000>;
 404                                         regulator-always-on;
 405                                         regulator-boot-on;
 406                                 };
 407
 408                                 /* SMPS7 unused */
 409
 410                                 smps8_reg: smps8 {
 411                                         /* VDD_1V8 */
 412                                         regulator-name = "smps8";
 413                                         regulator-min-microvolt = <1800000>;
 414                                         regulator-max-microvolt = <1800000>;
 415                                         regulator-always-on;
 416                                         regulator-boot-on;
 417                                 };
 418
 419                                 /* SMPS9 unused */
 420
 421                                 ldo1_reg: ldo1 {
 422                                         /* VDD_SD  */
 423                                         regulator-name = "ldo1";
 424                                         regulator-min-microvolt = <1800000>;
 425                                         regulator-max-microvolt = <3300000>;
 426                                         regulator-boot-on;
 427                                 };
 428
 429                                 ldo2_reg: ldo2 {
 430                                         /* VDD_SHV5 */
 431                                         regulator-name = "ldo2";
 432                                         regulator-min-microvolt = <3300000>;
 433                                         regulator-max-microvolt = <3300000>;
 434                                         regulator-always-on;
 435                                         regulator-boot-on;
 436                                 };
 437
 438                                 ldo3_reg: ldo3 {
 439                                         /* VDDA_1V8_PHY */
 440                                         regulator-name = "ldo3";
 441                                         regulator-min-microvolt = <1800000>;
 442                                         regulator-max-microvolt = <1800000>;
 443                                         regulator-always-on;
 444                                         regulator-boot-on;
 445                                 };
 446
 447                                 ldo9_reg: ldo9 {
 448                                         /* VDD_RTC */
 449                                         regulator-name = "ldo9";
 450                                         regulator-min-microvolt = <1050000>;
 451                                         regulator-max-microvolt = <1050000>;
 452                                         regulator-always-on;
 453                                         regulator-boot-on;
 454                                 };
 455
 456                                 ldoln_reg: ldoln {
 457                                         /* VDDA_1V8_PLL */
 458                                         regulator-name = "ldoln";
 459                                         regulator-min-microvolt = <1800000>;
 460                                         regulator-max-microvolt = <1800000>;
 461                                         regulator-always-on;
 462                                         regulator-boot-on;
 463                                 };
 464
 465                                 ldousb_reg: ldousb {
 466                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 467                                         regulator-name = "ldousb";
 468                                         regulator-min-microvolt = <3300000>;
 469                                         regulator-max-microvolt = <3300000>;
 470                                         regulator-boot-on;
 471                                 };
 472
 473                                 regen1: regen1 {
 474                                         /* VDD_3V3_ON */
 475                                         regulator-name = "regen1";
 476                                         regulator-boot-on;
 477                                         regulator-always-on;
 478                                 };
 479                         };
 480                 };
 481
 482                 tps659038_rtc: tps659038_rtc {
 483                         compatible = "ti,palmas-rtc";
 484                         interrupt-parent = <&tps659038>;
 485                         interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 486                         wakeup-source;
 487                 };
 488
 489                 tps659038_pwr_button: tps659038_pwr_button {
 490                         compatible = "ti,palmas-pwrbutton";
 491                         interrupt-parent = <&tps659038>;
 492                         interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 493                         wakeup-source;
 494                         ti,palmas-long-press-seconds = <12>;
 495                 };
 496
 497                 tps659038_gpio: tps659038_gpio {
 498                         compatible = "ti,palmas-gpio";
 499                         gpio-controller;
 500                         #gpio-cells = <2>;
 501                 };
 502         };
 503
 504         tmp102: tmp102@48 {
 505                 compatible = "ti,tmp102";
 506                 reg = <0x48>;
 507                 pinctrl-names = "default";
 508                 pinctrl-0 = <&tmp102_pins_default>;
 509                 interrupt-parent = <&gpio7>;
 510                 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 511                 #thermal-sensor-cells = <1>;
 512         };
 513 };
 514
 515 &i2c3 {
 516         status = "okay";
 517         pinctrl-names = "default";
 518         pinctrl-0 = <&i2c3_pins_default>;
 519         clock-frequency = <400000>;
 520
 521         mcp_rtc: rtc@6f {
 522                 compatible = "microchip,mcp7941x";
 523                 reg = <0x6f>;
 524                 interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;  /* IRQ_SYS_1N */
 525
 526                 pinctrl-names = "default";
 527                 pinctrl-0 = <&mcp79410_pins_default>;
 528
 529                 vcc-supply = <&vdd_3v3>;
 530                 wakeup-source;
 531         };
 532 };
 533
 534 &gpio7 {
 535         ti,no-reset-on-init;
 536         ti,no-idle-on-init;
 537 };
 538
 539 &cpu0 {
 540         cpu0-supply = <&smps12_reg>;
 541         voltage-tolerance = <1>;
 542 };
 543
 544 &uart3 {
 545         status = "okay";
 546         interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
 547                               <&dra7_pmx_core 0x3f8>;
 548
 549         pinctrl-names = "default";
 550         pinctrl-0 = <&uart3_pins_default>;
 551 };
 552
 553 &mac {
 554         status = "okay";
 555         pinctrl-names = "default", "sleep";
 556         pinctrl-0 = <&cpsw_pins_default>;
 557         pinctrl-1 = <&cpsw_pins_sleep>;
 558         dual_emac;
 559 };
 560
 561 &cpsw_emac0 {
 562         phy_id = <&davinci_mdio>, <1>;
 563         phy-mode = "rgmii";
 564         dual_emac_res_vlan = <1>;
 565 };
 566
 567 &cpsw_emac1 {
 568         phy_id = <&davinci_mdio>, <2>;
 569         phy-mode = "rgmii";
 570         dual_emac_res_vlan = <2>;
 571 };
 572
 573 &davinci_mdio {
 574         pinctrl-names = "default", "sleep";
 575         pinctrl-0 = <&davinci_mdio_pins_default>;
 576         pinctrl-1 = <&davinci_mdio_pins_sleep>;
 577 };
 578
 579 &mmc1 {
 580         status = "okay";
 581
 582         pinctrl-names = "default";
 583         pinctrl-0 = <&mmc1_pins_default>;
 584
 585         vmmc-supply = <&ldo1_reg>;
 586         vmmc_aux-supply = <&vdd_3v3>;
 587         pbias-supply = <&pbias_mmc_reg>;
 588         bus-width = <4>;
 589         cd-gpios = <&gpio6 27 0>; /* gpio 219 */
 590 };
 591
 592 &mmc2 {
 593         status = "okay";
 594
 595         pinctrl-names = "default";
 596         pinctrl-0 = <&mmc2_pins_default>;
 597
 598         vmmc-supply = <&vdd_3v3>;
 599         bus-width = <8>;
 600         ti,non-removable;
 601         cap-mmc-dual-data-rate;
 602 };
 603
 604 &sata {
 605         status = "okay";
 606 };
 607
 608 &usb2_phy1 {
 609         phy-supply = <&ldousb_reg>;
 610 };
 611
 612 &usb2_phy2 {
 613         phy-supply = <&ldousb_reg>;
 614 };
 615
 616 &usb1 {
 617         dr_mode = "host";
 618         pinctrl-names = "default";
 619         pinctrl-0 = <&usb1_pins>;
 620 };
 621
 622 &omap_dwc3_1 {
 623         extcon = <&extcon_usb1>;
 624 };
 625
 626 &omap_dwc3_2 {
 627         extcon = <&extcon_usb2>;
 628 };
 629
 630 &usb2 {
 631         dr_mode = "peripheral";
 632 };
 633
 634 &cpu_trips {
 635         cpu_alert1: cpu_alert1 {
 636                 temperature = <50000>; /* millicelsius */
 637                 hysteresis = <2000>; /* millicelsius */
 638                 type = "active";
 639         };
 640 };
 641
 642 &cpu_cooling_maps {
 643         map1 {
 644                 trip = <&cpu_alert1>;
 645                 cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 646         };
 647 };
 648
 649 &thermal_zones {
 650         board_thermal: board_thermal {
 651                 polling-delay-passive = <1250>; /* milliseconds */
 652                 polling-delay = <1500>; /* milliseconds */
 653
 654                                 /* sensor       ID */
 655                 thermal-sensors = <&tmp102     0>;
 656
 657                 board_trips: trips {
 658                         board_alert0: board_alert {
 659                                 temperature = <40000>; /* millicelsius */
 660                                 hysteresis = <2000>; /* millicelsius */
 661                                 type = "active";
 662                         };
 663
 664                         board_crit: board_crit {
 665                                 temperature = <105000>; /* millicelsius */
 666                                 hysteresis = <0>; /* millicelsius */
 667                                 type = "critical";
 668                         };
 669                 };
 670
 671                 board_cooling_maps: cooling-maps {
 672                         map0 {
 673                                 trip = <&board_alert0>;
 674                                 cooling-device =
 675                                   <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 676                         };
 677                 };
 678        };
 679 };
 680
 681 &dss {
 682         status = "ok";
 683
 684         vdda_video-supply = <&ldoln_reg>;
 685 };
 686
 687 &hdmi {
 688         status = "ok";
 689         vdda-supply = <&ldo3_reg>;
 690
 691         pinctrl-names = "default";
 692         pinctrl-0 = <&hdmi_pins>;
 693
 694         port {
 695                 hdmi_out: endpoint {
 696                         remote-endpoint = <&tpd12s015_in>;
 697                 };
 698         };
 699 };