]> git.ipfire.org Git - people/ms/u-boot.git/blob - arch/arm/dts/rk3399-puma.dtsi
rockchip: dts: rk3399-puma: add 'same-as-spl' to the front of the boot-order
[people/ms/u-boot.git] / arch / arm / dts / rk3399-puma.dtsi
1 /*
2 * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
3 *
4 * SPDX-License-Identifier: GPL-2.0+ X11
5 */
6
7 #include <dt-bindings/pwm/pwm.h>
8 #include "rk3399.dtsi"
9
10 / {
11 model = "Theobroma Systems RK3399-Q7 SoM";
12 compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399";
13
14 config {
15 u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
16 u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
17 u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
18 u-boot,boot-led = "module_led";
19 };
20
21 chosen {
22 stdout-path = "serial0:115200n8";
23 u-boot,spl-boot-order = \
24 "same-as-spl", &spiflash, &sdhci, &sdmmc;
25 };
26
27 aliases {
28 spi0 = &spi1;
29 spi1 = &spi5;
30 };
31
32 leds {
33 compatible = "gpio-leds";
34 pinctrl-names = "default";
35 pinctrl-0 = <&leds_pins_puma>;
36
37 module_led {
38 label = "module_led";
39 gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
40 linux,default-trigger = "heartbeat";
41 };
42
43 sd_card_led {
44 label = "sd_card_led";
45 gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
46 linux,default-trigger = "mmc0";
47 };
48 };
49
50 clkin_gmac: external-gmac-clock {
51 compatible = "fixed-clock";
52 clock-frequency = <125000000>;
53 clock-output-names = "clkin_gmac";
54 #clock-cells = <0>;
55 };
56
57 dw_hdmi_audio: dw-hdmi-audio {
58 status = "enabled";
59 compatible = "rockchip,dw-hdmi-audio";
60 #sound-dai-cells = <0>;
61 };
62
63 hdmi_codec: hdmi-codec {
64 compatible = "simple-audio-card";
65 simple-audio-card,format = "i2s";
66 simple-audio-card,mclk-fs = <256>;
67 simple-audio-card,name = "HDMI-CODEC";
68
69 simple-audio-card,cpu {
70 sound-dai = <&i2s2>;
71 };
72
73 simple-audio-card,codec {
74 sound-dai = <&hdmi>;
75 };
76 };
77
78 hdmi_sound: hdmi-sound {
79 status = "disabled";
80 compatible = "simple-audio-card";
81 simple-audio-card,format = "i2s";
82 simple-audio-card,mclk-fs = <256>;
83 simple-audio-card,name = "rockchip,hdmi";
84
85 simple-audio-card,cpu {
86 sound-dai = <&i2s2>;
87 };
88 simple-audio-card,codec {
89 sound-dai = <&hdmi>;
90 };
91 };
92
93 usbhub_enable: usbhub_enable {
94 compatible = "regulator-fixed";
95 regulator-name = "usbhub_enable";
96 enable-active-low;
97 gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
98 regulator-always-on;
99 regulator-boot-on;
100 regulator-min-microvolt = <3300000>;
101 regulator-max-microvolt = <3300000>;
102 };
103
104 vccadc_ref: vccadc-ref {
105 compatible = "regulator-fixed";
106 regulator-name = "vcc1v8_sys";
107 regulator-always-on;
108 regulator-boot-on;
109 regulator-min-microvolt = <1800000>;
110 regulator-max-microvolt = <1800000>;
111 };
112
113 vcc3v3_sys: vcc3v3-sys {
114 compatible = "regulator-fixed";
115 regulator-name = "vcc3v3_sys";
116 regulator-always-on;
117 regulator-boot-on;
118 regulator-min-microvolt = <3300000>;
119 regulator-max-microvolt = <3300000>;
120 };
121
122 vcc5v0_otg: vcc5v0-otg-regulator {
123 compatible = "regulator-fixed";
124 enable-active-high;
125 gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
126 pinctrl-names = "default";
127 pinctrl-0 = <&otg_vbus_drv>;
128 regulator-name = "vcc5v0_otg";
129 regulator-always-on;
130 };
131
132 vcc5v0_host: vcc5v0-host-regulator {
133 compatible = "regulator-fixed";
134 enable-active-low;
135 gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
136 pinctrl-names = "default";
137 pinctrl-0 = <&host_vbus_drv>;
138 regulator-name = "vcc5v0_host";
139 regulator-always-on;
140 };
141
142 vcc5v0_sys: vcc5v0-sys {
143 compatible = "regulator-fixed";
144 regulator-name = "vcc5v0_sys";
145 regulator-always-on;
146 regulator-boot-on;
147 regulator-min-microvolt = <5000000>;
148 regulator-max-microvolt = <5000000>;
149 };
150
151 vcc_phy: vcc-phy-regulator {
152 compatible = "regulator-fixed";
153 regulator-name = "vcc_phy";
154 regulator-always-on;
155 regulator-boot-on;
156 };
157
158 vdd_log: vdd-log {
159 compatible = "pwm-regulator";
160 pwms = <&pwm2 0 25000 1>;
161 regulator-name = "vdd_log";
162 regulator-min-microvolt = <800000>;
163 regulator-max-microvolt = <1400000>;
164 regulator-always-on;
165 regulator-boot-on;
166
167 /* for rockchip boot on */
168 rockchip,pwm_id= <2>;
169 rockchip,pwm_voltage = <1000000>;
170 };
171 };
172
173 &emmc_phy {
174 status = "okay";
175 };
176
177 &gmac {
178 phy-supply = <&vcc_phy>;
179 phy-mode = "rgmii";
180 clock_in_out = "input";
181 snps,reset-gpio = <&gpio3 16 GPIO_ACTIVE_LOW>;
182 snps,reset-active-low;
183 snps,reset-delays-us = <2 10000 50000>;
184 assigned-clocks = <&cru SCLK_RMII_SRC>;
185 assigned-clock-parents = <&clkin_gmac>;
186 pinctrl-names = "default";
187 pinctrl-0 = <&rgmii_pins>;
188 tx_delay = <0x10>;
189 rx_delay = <0x10>;
190 status = "okay";
191 };
192
193 &hdmi {
194 #address-cells = <1>;
195 #size-cells = <0>;
196 #sound-dai-cells = <0>;
197 status = "okay";
198 };
199
200 &i2c0 {
201 status = "okay";
202 i2c-scl-rising-time-ns = <168>;
203 i2c-scl-falling-time-ns = <4>;
204 clock-frequency = <400000>;
205
206 vdd_gpu: fan535555@60 {
207 compatible = "fcs,fan53555";
208 reg = <0x60>;
209 vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
210 vin-supply = <&vcc5v0_sys>;
211 regulator-compatible = "fan53555-reg";
212 regulator-name = "vdd_gpu";
213 regulator-min-microvolt = <600000>;
214 regulator-max-microvolt = <1230000>;
215 regulator-ramp-delay = <1000>;
216 fcs,suspend-voltage-selector = <1>;
217 regulator-always-on;
218 regulator-boot-on;
219 regulator-initial-state = <3>;
220 regulator-state-mem {
221 regulator-off-in-suspend;
222 };
223 };
224
225 rk808: pmic@1b {
226 compatible = "rockchip,rk808";
227 reg = <0x1b>;
228 interrupt-parent = <&gpio1>;
229 interrupts = <22 IRQ_TYPE_LEVEL_LOW>; // TODO check interrupt?
230 pinctrl-names = "default";
231 pinctrl-0 = <&pmic_int_l>;
232 rockchip,system-power-controller;
233 wakeup-source;
234 #clock-cells = <1>;
235 clock-output-names = "xin32k", "rk808-clkout2";
236
237 vcc1-supply = <&vcc5v0_sys>;
238 vcc2-supply = <&vcc5v0_sys>;
239 vcc3-supply = <&vcc5v0_sys>;
240 vcc4-supply = <&vcc5v0_sys>;
241 vcc6-supply = <&vcc5v0_sys>;
242 vcc7-supply = <&vcc5v0_sys>;
243 vcc8-supply = <&vcc3v3_sys>;
244 vcc9-supply = <&vcc5v0_sys>;
245 vcc10-supply = <&vcc5v0_sys>;
246 vcc11-supply = <&vcc5v0_sys>;
247 vcc12-supply = <&vcc3v3_sys>;
248 vddio-supply = <&vcc1v8_pmu>;
249
250 regulators {
251 vdd_center: DCDC_REG1 {
252 regulator-always-on;
253 regulator-boot-on;
254 regulator-min-microvolt = <750000>;
255 regulator-max-microvolt = <1350000>;
256 regulator-ramp-delay = <6001>;
257 regulator-name = "vdd_center";
258 regulator-state-mem {
259 regulator-off-in-suspend;
260 };
261 };
262
263 vdd_cpu_l: DCDC_REG2 {
264 regulator-always-on;
265 regulator-boot-on;
266 regulator-min-microvolt = <750000>;
267 regulator-max-microvolt = <1350000>;
268 regulator-ramp-delay = <6001>;
269 regulator-name = "vdd_cpu_l";
270 regulator-state-mem {
271 regulator-off-in-suspend;
272 };
273 };
274
275 vcc_ddr: DCDC_REG3 {
276 regulator-always-on;
277 regulator-boot-on;
278 regulator-name = "vcc_ddr";
279 regulator-state-mem {
280 regulator-on-in-suspend;
281 };
282 };
283
284 vcc_1v8: DCDC_REG4 {
285 regulator-always-on;
286 regulator-boot-on;
287 regulator-min-microvolt = <1800000>;
288 regulator-max-microvolt = <1800000>;
289 regulator-name = "vcc_1v8";
290 regulator-state-mem {
291 regulator-on-in-suspend;
292 regulator-suspend-microvolt = <1800000>;
293 };
294 };
295
296 vcc_ldo1: LDO_REG1 {
297 regulator-boot-on;
298 regulator-min-microvolt = <1800000>;
299 regulator-max-microvolt = <1800000>;
300 regulator-name = "vcc_ldo1";
301 regulator-state-mem {
302 regulator-off-in-suspend;
303 };
304 };
305
306 vcc1v8_hdmi: LDO_REG2 {
307 regulator-always-on;
308 regulator-boot-on;
309 regulator-min-microvolt = <1800000>;
310 regulator-max-microvolt = <1800000>;
311 regulator-name = "vcc1v8_hdmi";
312 regulator-state-mem {
313 regulator-off-in-suspend;
314 };
315 };
316
317 vcc1v8_pmu: LDO_REG3 {
318 regulator-always-on;
319 regulator-boot-on;
320 regulator-min-microvolt = <1800000>;
321 regulator-max-microvolt = <1800000>;
322 regulator-name = "vcc1v8_pmu";
323 regulator-state-mem {
324 regulator-on-in-suspend;
325 regulator-suspend-microvolt = <1800000>;
326 };
327 };
328
329 vcc_sd: LDO_REG4 {
330 regulator-always-on;
331 regulator-boot-on;
332 regulator-min-microvolt = <1800000>;
333 regulator-max-microvolt = <3300000>;
334 regulator-name = "vcc_sd";
335 regulator-state-mem {
336 regulator-on-in-suspend;
337 regulator-suspend-microvolt = <3300000>;
338 };
339 };
340
341 vcc_ldo5: LDO_REG5 {
342 regulator-boot-on;
343 regulator-min-microvolt = <3000000>;
344 regulator-max-microvolt = <3000000>;
345 regulator-name = "vcc_ldo5";
346 regulator-state-mem {
347 regulator-off-in-suspend;
348 };
349 };
350
351 vcc_ldo6: LDO_REG6 {
352 regulator-boot-on;
353 regulator-min-microvolt = <1500000>;
354 regulator-max-microvolt = <1500000>;
355 regulator-name = "vcc_ldo6";
356 regulator-state-mem {
357 regulator-off-in-suspend;
358 };
359 };
360
361 vcc0v9_hdmi: LDO_REG7 {
362 regulator-always-on;
363 regulator-boot-on;
364 regulator-min-microvolt = <900000>;
365 regulator-max-microvolt = <900000>;
366 regulator-name = "vcc0v9_hdmi";
367 regulator-state-mem {
368 regulator-off-in-suspend;
369 };
370 };
371
372 vcc_efuse: LDO_REG8 {
373 regulator-always-on;
374 regulator-boot-on;
375 regulator-min-microvolt = <1800000>;
376 regulator-max-microvolt = <1800000>;
377 regulator-name = "vcc_efuse";
378 regulator-state-mem {
379 regulator-off-in-suspend;
380 };
381 };
382
383 vcc3v3_s3: SWITCH_REG1 {
384 regulator-always-on;
385 regulator-boot-on;
386 regulator-name = "vcc3v3_s3";
387 regulator-state-mem {
388 regulator-off-in-suspend;
389 };
390 };
391
392 vcc3v3_s0: SWITCH_REG2 {
393 regulator-always-on;
394 regulator-boot-on;
395 regulator-name = "vcc3v3_s0";
396 regulator-state-mem {
397 regulator-off-in-suspend;
398 };
399 };
400 };
401 };
402 };
403
404 &i2c8 {
405 status = "okay";
406 clock-frequency = <400000>;
407
408 vdd_cpu_b: fan53555@60 {
409 compatible = "fcs,fan53555";
410 reg = <0x60>;
411 vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
412 vin-supply = <&vcc5v0_sys>;
413 regulator-compatible = "fan53555-reg";
414 regulator-name = "vdd_cpu_b";
415 regulator-min-microvolt = <600000>;
416 regulator-max-microvolt = <1230000>;
417 regulator-ramp-delay = <1000>;
418 fcs,suspend-voltage-selector = <1>;
419 regulator-always-on;
420 regulator-boot-on;
421 regulator-initial-state = <3>;
422 regulator-state-mem {
423 regulator-off-in-suspend;
424 };
425 };
426 };
427
428 &i2s0 {
429 status = "okay";
430 rockchip,i2s-broken-burst-len;
431 rockchip,playback-channels = <8>;
432 rockchip,capture-channels = <8>;
433 #sound-dai-cells = <0>;
434 };
435
436 &i2s2 {
437 #sound-dai-cells = <0>;
438 status = "okay";
439 };
440
441 &io_domains {
442 status = "okay";
443
444 bt656-supply = <&vcc_1v8>; /* bt656_gpio2ab_ms */
445 audio-supply = <&vcc_1v8>; /* audio_gpio3d4a_ms */
446 sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
447 gpio1830-supply = <&vcc_1v8>; /* gpio1833_gpio4cd_ms */
448 };
449
450 &pcie0 {
451 assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
452 assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
453 assigned-clock-rates = <100000000>;
454 ep-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
455 num-lanes = <4>;
456 pinctrl-names = "default";
457 pinctrl-0 = <&pcie_clkreqn>;
458 status = "okay";
459 };
460
461 &pcie_phy {
462 status = "okay";
463 };
464
465 &pmu_io_domains {
466 status = "okay";
467 pmu1830-supply = <&vcc_1v8>;
468 };
469
470 &pwm0 {
471 status = "okay";
472 };
473
474 &pwm2 {
475 status = "okay";
476 };
477
478 &sdhci {
479 bus-width = <8>;
480 mmc-hs400-1_8v;
481 supports-emmc;
482 non-removable;
483 keep-power-in-suspend;
484 mmc-hs400-enhanced-strobe;
485 status = "okay";
486 };
487
488 &sdmmc {
489 u-boot,dm-pre-reloc;
490 clock-frequency = <150000000>;
491 clock-freq-min-max = <100000 150000000>;
492 supports-sd;
493 bus-width = <4>;
494 cap-mmc-highspeed;
495 cap-sd-highspeed;
496 disable-wp;
497 num-slots = <1>;
498 vqmmc-supply = <&vcc_sd>;
499 pinctrl-names = "default";
500 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
501 status = "okay";
502 };
503
504 &uart2 {
505 status = "okay";
506 };
507
508 &usb_host0_ehci {
509 status = "okay";
510 };
511
512 &usb_host0_ohci {
513 status = "okay";
514 };
515
516 &dwc3_typec0 {
517 status = "disabled";
518 };
519
520 &usb_host1_ehci {
521 status = "okay";
522 };
523
524 &usb_host1_ohci {
525 status = "okay";
526 };
527
528 &dwc3_typec1 {
529 status = "okay";
530 };
531
532 &vopb {
533 status = "okay";
534 };
535
536 &pinctrl {
537 /* Pins that are not explicitely used by any devices */
538 pinctrl-names = "default";
539 pinctrl-0 = <&puma_pin_hog>;
540 hog {
541 puma_pin_hog: puma_pin_hog {
542 rockchip,pins =
543 /* We need pull-ups on Q7 buttons */
544 <0 4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */
545 <0 10 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */
546 <0 11 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */
547 <0 9 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */
548 };
549 };
550
551 pmic {
552 pmic_int_l: pmic-int-l {
553 rockchip,pins =
554 <1 22 RK_FUNC_GPIO &pcfg_pull_up>;
555 };
556 };
557
558 leds_pins_puma: led_pins@0 {
559 rockchip,pins =
560 <2 25 RK_FUNC_GPIO &pcfg_pull_none>,
561 <1 2 RK_FUNC_GPIO &pcfg_pull_none>;
562 };
563
564 usb2 {
565 otg_vbus_drv: otg-vbus-drv {
566 rockchip,pins =
567 <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
568 };
569
570 host_vbus_drv: host-vbus-drv {
571 rockchip,pins =
572 <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
573 };
574 };
575
576 i2c8 {
577 i2c8_xfer_a: i2c8-xfer {
578 rockchip,pins = <1 21 RK_FUNC_1 &pcfg_pull_up>,
579 <1 20 RK_FUNC_1 &pcfg_pull_up>;
580 };
581 };
582 };
583
584 &i2c1 {
585 status = "okay";
586 clock-frequency = <400000>;
587 };
588 &i2c2 {
589 status = "okay";
590 clock-frequency = <400000>;
591 };
592 &i2c4 {
593 status = "okay";
594 clock-frequency = <400000>;
595 };
596 &i2c6 {
597 status = "okay";
598 clock-frequency = <400000>;
599 };
600
601 &i2c6_xfer {
602 /* Enable pull-ups, the pins would float otherwise. */
603 rockchip,pins =
604 <2 10 RK_FUNC_2 &pcfg_pull_up>,
605 <2 9 RK_FUNC_2 &pcfg_pull_up>;
606 };
607
608 &i2c7 {
609 status = "okay";
610 clock-frequency = <400000>;
611
612 rtc_twi: rtc@6f {
613 compatible = "isil,isl1208";
614 reg = <0x6f>;
615 };
616 fan: fan@18 {
617 compatible = "ti,amc6821";
618 reg = <0x18>;
619 cooling-min-state = <0>;
620 cooling-max-state = <9>;
621 #cooling-cells = <2>;
622 };
623 };
624
625 &uart0 {
626 u-boot,dm-pre-reloc;
627 pinctrl-names = "default";
628 pinctrl-0 = <&uart0_xfer &uart0_cts>;
629 status = "okay";
630 };
631
632
633 &spi1 {
634 u-boot,dm-pre-reloc;
635
636 status = "okay";
637
638 #address-cells = <1>;
639 #size-cells = <0>;
640
641 spiflash: w25q32dw@0 {
642 u-boot,dm-pre-reloc;
643
644 compatible = "spi-flash";
645 reg = <0>;
646 spi-max-frequency = <49500000>;
647 spi-cpol;
648 spi-cpha;
649 };
650 };
651
652 &spi5 {
653 status = "okay";
654 };
655