]> git.ipfire.org Git - people/ms/u-boot.git/blob - arch/arm/include/asm/arch-omap4/cpu.h
Add GPL-2.0+ SPDX-License-Identifier to source files
[people/ms/u-boot.git] / arch / arm / include / asm / arch-omap4 / cpu.h
1 /*
2 * (C) Copyright 2006-2010
3 * Texas Instruments, <www.ti.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8 #ifndef _CPU_H
9 #define _CPU_H
10
11 #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
12 #include <asm/types.h>
13 #endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
14
15 #ifndef __KERNEL_STRICT_NAMES
16 #ifndef __ASSEMBLY__
17 struct gpmc_cs {
18 u32 config1; /* 0x00 */
19 u32 config2; /* 0x04 */
20 u32 config3; /* 0x08 */
21 u32 config4; /* 0x0C */
22 u32 config5; /* 0x10 */
23 u32 config6; /* 0x14 */
24 u32 config7; /* 0x18 */
25 u32 nand_cmd; /* 0x1C */
26 u32 nand_adr; /* 0x20 */
27 u32 nand_dat; /* 0x24 */
28 u8 res[8]; /* blow up to 0x30 byte */
29 };
30
31 struct gpmc {
32 u8 res1[0x10];
33 u32 sysconfig; /* 0x10 */
34 u8 res2[0x4];
35 u32 irqstatus; /* 0x18 */
36 u32 irqenable; /* 0x1C */
37 u8 res3[0x20];
38 u32 timeout_control; /* 0x40 */
39 u8 res4[0xC];
40 u32 config; /* 0x50 */
41 u32 status; /* 0x54 */
42 u8 res5[0x8]; /* 0x58 */
43 struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */
44 u8 res6[0x14]; /* 0x1E0 */
45 u32 ecc_config; /* 0x1F4 */
46 u32 ecc_control; /* 0x1F8 */
47 u32 ecc_size_config; /* 0x1FC */
48 u32 ecc1_result; /* 0x200 */
49 u32 ecc2_result; /* 0x204 */
50 u32 ecc3_result; /* 0x208 */
51 u32 ecc4_result; /* 0x20C */
52 u32 ecc5_result; /* 0x210 */
53 u32 ecc6_result; /* 0x214 */
54 u32 ecc7_result; /* 0x218 */
55 u32 ecc8_result; /* 0x21C */
56 u32 ecc9_result; /* 0x220 */
57 };
58
59 /* Used for board specific gpmc initialization */
60 extern struct gpmc *gpmc_cfg;
61
62 struct gptimer {
63 u32 tidr; /* 0x00 r */
64 u8 res[0xc];
65 u32 tiocp_cfg; /* 0x10 rw */
66 u32 tistat; /* 0x14 r */
67 u32 tisr; /* 0x18 rw */
68 u32 tier; /* 0x1c rw */
69 u32 twer; /* 0x20 rw */
70 u32 tclr; /* 0x24 rw */
71 u32 tcrr; /* 0x28 rw */
72 u32 tldr; /* 0x2c rw */
73 u32 ttgr; /* 0x30 rw */
74 u32 twpc; /* 0x34 r */
75 u32 tmar; /* 0x38 rw */
76 u32 tcar1; /* 0x3c r */
77 u32 tcicr; /* 0x40 rw */
78 u32 tcar2; /* 0x44 r */
79 };
80 #endif /* __ASSEMBLY__ */
81 #endif /* __KERNEL_STRICT_NAMES */
82
83 /* enable sys_clk NO-prescale /1 */
84 #define GPT_EN ((0x0 << 2) | (0x1 << 1) | (0x1 << 0))
85
86 /* Watchdog */
87 #ifndef __KERNEL_STRICT_NAMES
88 #ifndef __ASSEMBLY__
89 struct watchdog {
90 u8 res1[0x34];
91 u32 wwps; /* 0x34 r */
92 u8 res2[0x10];
93 u32 wspr; /* 0x48 rw */
94 };
95 #endif /* __ASSEMBLY__ */
96 #endif /* __KERNEL_STRICT_NAMES */
97
98 #define WD_UNLOCK1 0xAAAA
99 #define WD_UNLOCK2 0x5555
100
101 #define TCLR_ST (0x1 << 0)
102 #define TCLR_AR (0x1 << 1)
103 #define TCLR_PRE (0x1 << 5)
104
105 /* GPMC BASE */
106 #define GPMC_BASE (OMAP44XX_GPMC_BASE)
107
108 /* I2C base */
109 #define I2C_BASE1 (OMAP44XX_L4_PER_BASE + 0x70000)
110 #define I2C_BASE2 (OMAP44XX_L4_PER_BASE + 0x72000)
111 #define I2C_BASE3 (OMAP44XX_L4_PER_BASE + 0x60000)
112 #define I2C_BASE4 (OMAP44XX_L4_PER_BASE + 0x350000)
113
114 /* MUSB base */
115 #define MUSB_BASE (OMAP44XX_L4_CORE_BASE + 0xAB000)
116
117 /* OMAP4 GPIO registers */
118 #define OMAP_GPIO_REVISION 0x0000
119 #define OMAP_GPIO_SYSCONFIG 0x0010
120 #define OMAP_GPIO_SYSSTATUS 0x0114
121 #define OMAP_GPIO_IRQSTATUS1 0x0118
122 #define OMAP_GPIO_IRQSTATUS2 0x0128
123 #define OMAP_GPIO_IRQENABLE2 0x012c
124 #define OMAP_GPIO_IRQENABLE1 0x011c
125 #define OMAP_GPIO_WAKE_EN 0x0120
126 #define OMAP_GPIO_CTRL 0x0130
127 #define OMAP_GPIO_OE 0x0134
128 #define OMAP_GPIO_DATAIN 0x0138
129 #define OMAP_GPIO_DATAOUT 0x013c
130 #define OMAP_GPIO_LEVELDETECT0 0x0140
131 #define OMAP_GPIO_LEVELDETECT1 0x0144
132 #define OMAP_GPIO_RISINGDETECT 0x0148
133 #define OMAP_GPIO_FALLINGDETECT 0x014c
134 #define OMAP_GPIO_DEBOUNCE_EN 0x0150
135 #define OMAP_GPIO_DEBOUNCE_VAL 0x0154
136 #define OMAP_GPIO_CLEARIRQENABLE1 0x0160
137 #define OMAP_GPIO_SETIRQENABLE1 0x0164
138 #define OMAP_GPIO_CLEARWKUENA 0x0180
139 #define OMAP_GPIO_SETWKUENA 0x0184
140 #define OMAP_GPIO_CLEARDATAOUT 0x0190
141 #define OMAP_GPIO_SETDATAOUT 0x0194
142
143 /*
144 * PRCM
145 */
146
147 /* PRM */
148 #define PRM_BASE 0x4A306000
149 #define PRM_DEVICE_BASE (PRM_BASE + 0x1B00)
150
151 #define PRM_RSTCTRL PRM_DEVICE_BASE
152 #define PRM_RSTCTRL_RESET 0x01
153 #define PRM_RSTST (PRM_DEVICE_BASE + 0x4)
154 #define PRM_RSTST_WARM_RESET_MASK 0x07EA
155
156 #endif /* _CPU_H */