Replace "#include <asm-$ARCH/$FILE>" with "#include <asm/$FILE>"

[people/ms/u-boot.git] / arch / arm / include / asm / arch-pxa / pxa-regs.h

/*
 *  linux/include/asm-arm/arch-pxa/pxa-regs.h
 *
 *  Author:     Nicolas Pitre
 *  Created:    Jun 15, 2001
 *  Copyright:  MontaVista Software Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de
 *   Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions.
 *   Added include for hardware.h (for __REG definition)
 */
#ifndef _PXA_REGS_H_
#define _PXA_REGS_H_

#include "bitfield.h"
#include "hardware.h"

/* FIXME hack so that SA-1111.h will work [cb] */

#ifndef __ASSEMBLY__
typedef unsigned short  Word16 ;
typedef unsigned int    Word32 ;
typedef Word32          Word ;
typedef Word            Quad [4] ;
typedef void            *Address ;
typedef void            (*ExcpHndlr) (void) ;
#endif

/*
 * PXA Chip selects
 */
#ifdef CONFIG_CPU_MONAHANS
#define PXA_CS0_PHYS   0x00000000 /* for both small and large same start */
#define PXA_CS1_PHYS   0x04000000 /* Small partition start address (64MB) */
#define PXA_CS1_LPHYS  0x30000000 /* Large partition start address (256MB) */
#define PXA_CS2_PHYS   0x10000000 /* (64MB) */
#define PXA_CS3_PHYS   0x14000000 /* (64MB) */
#define PXA_PCMCIA_PHYS        0x20000000 /* (256MB) */
#else
#define PXA_CS0_PHYS    0x00000000
#define PXA_CS1_PHYS    0x04000000
#define PXA_CS2_PHYS    0x08000000
#define PXA_CS3_PHYS    0x0C000000
#define PXA_CS4_PHYS    0x10000000
#define PXA_CS5_PHYS    0x14000000
#endif /* CONFIG_CPU_MONAHANS */

/*
 * Personal Computer Memory Card International Association (PCMCIA) sockets
 */
#define PCMCIAPrtSp     0x04000000      /* PCMCIA Partition Space [byte]   */
#define PCMCIASp        (4*PCMCIAPrtSp) /* PCMCIA Space [byte]             */
#define PCMCIAIOSp      PCMCIAPrtSp     /* PCMCIA I/O Space [byte]         */
#define PCMCIAAttrSp    PCMCIAPrtSp     /* PCMCIA Attribute Space [byte]   */
#define PCMCIAMemSp     PCMCIAPrtSp     /* PCMCIA Memory Space [byte]      */

#ifndef CONFIG_CPU_MONAHANS             /* Monahans supports only one slot */
#define PCMCIA0Sp       PCMCIASp        /* PCMCIA 0 Space [byte]           */
#define PCMCIA0IOSp     PCMCIAIOSp      /* PCMCIA 0 I/O Space [byte]       */
#define PCMCIA0AttrSp   PCMCIAAttrSp    /* PCMCIA 0 Attribute Space [byte] */
#define PCMCIA0MemSp    PCMCIAMemSp     /* PCMCIA 0 Memory Space [byte]    */
#endif

#define PCMCIA1Sp       PCMCIASp        /* PCMCIA 1 Space [byte]           */
#define PCMCIA1IOSp     PCMCIAIOSp      /* PCMCIA 1 I/O Space [byte]       */
#define PCMCIA1AttrSp   PCMCIAAttrSp    /* PCMCIA 1 Attribute Space [byte] */
#define PCMCIA1MemSp    PCMCIAMemSp     /* PCMCIA 1 Memory Space [byte]    */

#define _PCMCIA(Nb)                     /* PCMCIA [0..1]                   */ \
                        (0x20000000 + (Nb)*PCMCIASp)
#define _PCMCIAIO(Nb)   _PCMCIA (Nb)    /* PCMCIA I/O [0..1]               */
#define _PCMCIAAttr(Nb)                 /* PCMCIA Attribute [0..1]         */ \
                        (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
#define _PCMCIAMem(Nb)                  /* PCMCIA Memory [0..1]            */ \
                        (_PCMCIA (Nb) + 3*PCMCIAPrtSp)

#define _PCMCIA0        _PCMCIA (0)     /* PCMCIA 0                        */
#define _PCMCIA0IO      _PCMCIAIO (0)   /* PCMCIA 0 I/O                    */
#define _PCMCIA0Attr    _PCMCIAAttr (0) /* PCMCIA 0 Attribute              */
#define _PCMCIA0Mem     _PCMCIAMem (0)  /* PCMCIA 0 Memory                 */

#ifndef CONFIG_CPU_MONAHANS             /* Monahans supports only one slot */
#define _PCMCIA1        _PCMCIA (1)     /* PCMCIA 1                        */
#define _PCMCIA1IO      _PCMCIAIO (1)   /* PCMCIA 1 I/O                    */
#define _PCMCIA1Attr    _PCMCIAAttr (1) /* PCMCIA 1 Attribute              */
#define _PCMCIA1Mem     _PCMCIAMem (1)  /* PCMCIA 1 Memory                 */
#endif

/*
 * DMA Controller
 */
#define DCSR0           __REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
#define DCSR1           __REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
#define DCSR2           __REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
#define DCSR3           __REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
#define DCSR4           __REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
#define DCSR5           __REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
#define DCSR6           __REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
#define DCSR7           __REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
#define DCSR8           __REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
#define DCSR9           __REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
#define DCSR10          __REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
#define DCSR11          __REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
#define DCSR12          __REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
#define DCSR13          __REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
#define DCSR14          __REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
#define DCSR15          __REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
#ifdef CONFIG_CPU_MONAHANS
#define DCSR16          __REG(0x40000040)  /* DMA Control / Status Register for Channel 16 */
#define DCSR17          __REG(0x40000044)  /* DMA Control / Status Register for Channel 17 */
#define DCSR18          __REG(0x40000048)  /* DMA Control / Status Register for Channel 18 */
#define DCSR19          __REG(0x4000004c)  /* DMA Control / Status Register for Channel 19 */
#define DCSR20          __REG(0x40000050)  /* DMA Control / Status Register for Channel 20 */
#define DCSR21          __REG(0x40000054)  /* DMA Control / Status Register for Channel 21 */
#define DCSR22          __REG(0x40000058)  /* DMA Control / Status Register for Channel 22 */
#define DCSR23          __REG(0x4000005c)  /* DMA Control / Status Register for Channel 23 */
#define DCSR24          __REG(0x40000060)  /* DMA Control / Status Register for Channel 24 */
#define DCSR25          __REG(0x40000064)  /* DMA Control / Status Register for Channel 25 */
#define DCSR26          __REG(0x40000068)  /* DMA Control / Status Register for Channel 26 */
#define DCSR27          __REG(0x4000006c)  /* DMA Control / Status Register for Channel 27 */
#define DCSR28          __REG(0x40000070)  /* DMA Control / Status Register for Channel 28 */
#define DCSR29          __REG(0x40000074)  /* DMA Control / Status Register for Channel 29 */
#define DCSR30          __REG(0x40000078)  /* DMA Control / Status Register for Channel 30 */
#define DCSR31          __REG(0x4000007c)  /* DMA Control / Status Register for Channel 31 */
#endif /* CONFIG_CPU_MONAHANS */

#define DCSR(x)         __REG2(0x40000000, (x) << 2)

#define DCSR_RUN        (1 << 31)       /* Run Bit (read / write) */
#define DCSR_NODESC     (1 << 30)       /* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN  (1 << 29)       /* Stop Interrupt Enable (read / write) */

#if defined(CONFIG_PXA27X) || defined (CONFIG_CPU_MONAHANS)
#define DCSR_EORIRQEN   (1 << 28)       /* End of Receive Interrupt Enable (R/W) */
#define DCSR_EORJMPEN   (1 << 27)       /* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN  (1 << 26)       /* STOP on an EOR */
#define DCSR_SETCMPST   (1 << 25)       /* Set Descriptor Compare Status */
#define DCSR_CLRCMPST   (1 << 24)       /* Clear Descriptor Compare Status */
#define DCSR_CMPST      (1 << 10)       /* The Descriptor Compare Status */
#define DCSR_ENRINTR    (1 << 9)        /* The end of Receive */
#endif

#define DCSR_REQPEND    (1 << 8)        /* Request Pending (read-only) */
#define DCSR_STOPSTATE  (1 << 3)        /* Stop State (read-only) */
#define DCSR_ENDINTR    (1 << 2)        /* End Interrupt (read / write) */
#define DCSR_STARTINTR  (1 << 1)        /* Start Interrupt (read / write) */
#define DCSR_BUSERR     (1 << 0)        /* Bus Error Interrupt (read / write) */

#define DINT            __REG(0x400000f0)  /* DMA Interrupt Register */

#define DRCMR0          __REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
#define DRCMR1          __REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
#define DRCMR2          __REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
#define DRCMR3          __REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
#define DRCMR4          __REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
#define DRCMR5          __REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
#define DRCMR6          __REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
#define DRCMR7          __REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
#define DRCMR8          __REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
#define DRCMR9          __REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
#define DRCMR10         __REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
#define DRCMR11         __REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
#define DRCMR12         __REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
#define DRCMR13         __REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
#define DRCMR14         __REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
#define DRCMR15         __REG(0x4000013c)  /* Reserved */
#define DRCMR16         __REG(0x40000140)  /* Reserved */
#define DRCMR17         __REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
#define DRCMR18         __REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
#define DRCMR19         __REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
#define DRCMR20         __REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
#define DRCMR21         __REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
#define DRCMR22         __REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
#define DRCMR23         __REG(0x4000015c)  /* Reserved */
#define DRCMR24         __REG(0x40000160)  /* Reserved */
#define DRCMR25         __REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
#define DRCMR26         __REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
#define DRCMR27         __REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
#define DRCMR28         __REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
#define DRCMR29         __REG(0x40000174)  /* Reserved */
#define DRCMR30         __REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
#define DRCMR31         __REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
#define DRCMR32         __REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
#define DRCMR33         __REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
#define DRCMR34         __REG(0x40000188)  /* Reserved */
#define DRCMR35         __REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
#define DRCMR36         __REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
#define DRCMR37         __REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
#define DRCMR38         __REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
#define DRCMR39         __REG(0x4000019C)  /* Reserved */

#define DRCMR68                __REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
#define DRCMR69                __REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
#define DRCMR70                __REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */

#define DRCMRRXSADR     DRCMR2
#define DRCMRTXSADR     DRCMR3
#define DRCMRRXBTRBR    DRCMR4
#define DRCMRTXBTTHR    DRCMR5
#define DRCMRRXFFRBR    DRCMR6
#define DRCMRTXFFTHR    DRCMR7
#define DRCMRRXMCDR     DRCMR8
#define DRCMRRXMODR     DRCMR9
#define DRCMRTXMODR     DRCMR10
#define DRCMRRXPCDR     DRCMR11
#define DRCMRTXPCDR     DRCMR12
#define DRCMRRXSSDR     DRCMR13
#define DRCMRTXSSDR     DRCMR14
#define DRCMRRXICDR     DRCMR17
#define DRCMRTXICDR     DRCMR18
#define DRCMRRXSTRBR    DRCMR19
#define DRCMRTXSTTHR    DRCMR20
#define DRCMRRXMMC      DRCMR21
#define DRCMRTXMMC      DRCMR22

#define DRCMR_MAPVLD    (1 << 7)        /* Map Valid (read / write) */
#define DRCMR_CHLNUM    0x0f            /* mask for Channel Number (read / write) */

#define DDADR0          __REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
#define DSADR0          __REG(0x40000204)  /* DMA Source Address Register Channel 0 */
#define DTADR0          __REG(0x40000208)  /* DMA Target Address Register Channel 0 */
#define DCMD0           __REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
#define DDADR1          __REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
#define DSADR1          __REG(0x40000214)  /* DMA Source Address Register Channel 1 */
#define DTADR1          __REG(0x40000218)  /* DMA Target Address Register Channel 1 */
#define DCMD1           __REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
#define DDADR2          __REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
#define DSADR2          __REG(0x40000224)  /* DMA Source Address Register Channel 2 */
#define DTADR2          __REG(0x40000228)  /* DMA Target Address Register Channel 2 */
#define DCMD2           __REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
#define DDADR3          __REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
#define DSADR3          __REG(0x40000234)  /* DMA Source Address Register Channel 3 */
#define DTADR3          __REG(0x40000238)  /* DMA Target Address Register Channel 3 */
#define DCMD3           __REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
#define DDADR4          __REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
#define DSADR4          __REG(0x40000244)  /* DMA Source Address Register Channel 4 */
#define DTADR4          __REG(0x40000248)  /* DMA Target Address Register Channel 4 */
#define DCMD4           __REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
#define DDADR5          __REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
#define DSADR5          __REG(0x40000254)  /* DMA Source Address Register Channel 5 */
#define DTADR5          __REG(0x40000258)  /* DMA Target Address Register Channel 5 */
#define DCMD5           __REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
#define DDADR6          __REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
#define DSADR6          __REG(0x40000264)  /* DMA Source Address Register Channel 6 */
#define DTADR6          __REG(0x40000268)  /* DMA Target Address Register Channel 6 */
#define DCMD6           __REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
#define DDADR7          __REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
#define DSADR7          __REG(0x40000274)  /* DMA Source Address Register Channel 7 */
#define DTADR7          __REG(0x40000278)  /* DMA Target Address Register Channel 7 */
#define DCMD7           __REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
#define DDADR8          __REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
#define DSADR8          __REG(0x40000284)  /* DMA Source Address Register Channel 8 */
#define DTADR8          __REG(0x40000288)  /* DMA Target Address Register Channel 8 */
#define DCMD8           __REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
#define DDADR9          __REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
#define DSADR9          __REG(0x40000294)  /* DMA Source Address Register Channel 9 */
#define DTADR9          __REG(0x40000298)  /* DMA Target Address Register Channel 9 */
#define DCMD9           __REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
#define DDADR10         __REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
#define DSADR10         __REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
#define DTADR10         __REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
#define DCMD10          __REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
#define DDADR11         __REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
#define DSADR11         __REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
#define DTADR11         __REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
#define DCMD11          __REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
#define DDADR12         __REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
#define DSADR12         __REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
#define DTADR12         __REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
#define DCMD12          __REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
#define DDADR13         __REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
#define DSADR13         __REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
#define DTADR13         __REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
#define DCMD13          __REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
#define DDADR14         __REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
#define DSADR14         __REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
#define DTADR14         __REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
#define DCMD14          __REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
#define DDADR15         __REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
#define DSADR15         __REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
#define DTADR15         __REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
#define DCMD15          __REG(0x400002fc)  /* DMA Command Address Register Channel 15 */

#define DDADR(x)        __REG2(0x40000200, (x) << 4)
#define DSADR(x)        __REG2(0x40000204, (x) << 4)
#define DTADR(x)        __REG2(0x40000208, (x) << 4)
#define DCMD(x)         __REG2(0x4000020c, (x) << 4)

#define DDADR_DESCADDR  0xfffffff0      /* Address of next descriptor (mask) */
#define DDADR_STOP      (1 << 0)        /* Stop (read / write) */

#define DCMD_INCSRCADDR (1 << 31)       /* Source Address Increment Setting. */
#define DCMD_INCTRGADDR (1 << 30)       /* Target Address Increment Setting. */
#define DCMD_FLOWSRC    (1 << 29)       /* Flow Control by the source. */
#define DCMD_FLOWTRG    (1 << 28)       /* Flow Control by the target. */
#define DCMD_STARTIRQEN (1 << 22)       /* Start Interrupt Enable */
#define DCMD_ENDIRQEN   (1 << 21)       /* End Interrupt Enable */
#define DCMD_ENDIAN     (1 << 18)       /* Device Endian-ness. */
#define DCMD_BURST8     (1 << 16)       /* 8 byte burst */
#define DCMD_BURST16    (2 << 16)       /* 16 byte burst */
#define DCMD_BURST32    (3 << 16)       /* 32 byte burst */
#define DCMD_WIDTH1     (1 << 14)       /* 1 byte width */
#define DCMD_WIDTH2     (2 << 14)       /* 2 byte width (HalfWord) */
#define DCMD_WIDTH4     (3 << 14)       /* 4 byte width (Word) */
#define DCMD_LENGTH     0x01fff         /* length mask (max = 8K - 1) */

/* default combinations */
#define DCMD_RXPCDR     (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
#define DCMD_RXMCDR     (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
#define DCMD_TXPCDR     (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)

/*
 * UARTs
 */
/* Full Function UART (FFUART) */
#define FFUART          FFRBR
#define FFRBR           __REG(0x40100000)  /* Receive Buffer Register (read only) */
#define FFTHR           __REG(0x40100000)  /* Transmit Holding Register (write only) */
#define FFIER           __REG(0x40100004)  /* Interrupt Enable Register (read/write) */
#define FFIIR           __REG(0x40100008)  /* Interrupt ID Register (read only) */
#define FFFCR           __REG(0x40100008)  /* FIFO Control Register (write only) */
#define FFLCR           __REG(0x4010000C)  /* Line Control Register (read/write) */
#define FFMCR           __REG(0x40100010)  /* Modem Control Register (read/write) */
#define FFLSR           __REG(0x40100014)  /* Line Status Register (read only) */
#define FFMSR           __REG(0x40100018)  /* Modem Status Register (read only) */
#define FFSPR           __REG(0x4010001C)  /* Scratch Pad Register (read/write) */
#define FFISR           __REG(0x40100020)  /* Infrared Selection Register (read/write) */
#define FFDLL           __REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define FFDLH           __REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */

/* Bluetooth UART (BTUART) */
#define BTUART          BTRBR
#define BTRBR           __REG(0x40200000)  /* Receive Buffer Register (read only) */
#define BTTHR           __REG(0x40200000)  /* Transmit Holding Register (write only) */
#define BTIER           __REG(0x40200004)  /* Interrupt Enable Register (read/write) */
#define BTIIR           __REG(0x40200008)  /* Interrupt ID Register (read only) */
#define BTFCR           __REG(0x40200008)  /* FIFO Control Register (write only) */
#define BTLCR           __REG(0x4020000C)  /* Line Control Register (read/write) */
#define BTMCR           __REG(0x40200010)  /* Modem Control Register (read/write) */
#define BTLSR           __REG(0x40200014)  /* Line Status Register (read only) */
#define BTMSR           __REG(0x40200018)  /* Modem Status Register (read only) */
#define BTSPR           __REG(0x4020001C)  /* Scratch Pad Register (read/write) */
#define BTISR           __REG(0x40200020)  /* Infrared Selection Register (read/write) */
#define BTDLL           __REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define BTDLH           __REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */

/* Standard UART (STUART) */
#define STUART          STRBR
#define STRBR           __REG(0x40700000)  /* Receive Buffer Register (read only) */
#define STTHR           __REG(0x40700000)  /* Transmit Holding Register (write only) */
#define STIER           __REG(0x40700004)  /* Interrupt Enable Register (read/write) */
#define STIIR           __REG(0x40700008)  /* Interrupt ID Register (read only) */
#define STFCR           __REG(0x40700008)  /* FIFO Control Register (write only) */
#define STLCR           __REG(0x4070000C)  /* Line Control Register (read/write) */
#define STMCR           __REG(0x40700010)  /* Modem Control Register (read/write) */
#define STLSR           __REG(0x40700014)  /* Line Status Register (read only) */
#define STMSR           __REG(0x40700018)  /* Reserved */
#define STSPR           __REG(0x4070001C)  /* Scratch Pad Register (read/write) */
#define STISR           __REG(0x40700020)  /* Infrared Selection Register (read/write) */
#define STDLL           __REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define STDLH           __REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */

#define IER_DMAE        (1 << 7)        /* DMA Requests Enable */
#define IER_UUE         (1 << 6)        /* UART Unit Enable */
#define IER_NRZE        (1 << 5)        /* NRZ coding Enable */
#define IER_RTIOE       (1 << 4)        /* Receiver Time Out Interrupt Enable */
#define IER_MIE         (1 << 3)        /* Modem Interrupt Enable */
#define IER_RLSE        (1 << 2)        /* Receiver Line Status Interrupt Enable */
#define IER_TIE         (1 << 1)        /* Transmit Data request Interrupt Enable */
#define IER_RAVIE       (1 << 0)        /* Receiver Data Available Interrupt Enable */

#define IIR_FIFOES1     (1 << 7)        /* FIFO Mode Enable Status */
#define IIR_FIFOES0     (1 << 6)        /* FIFO Mode Enable Status */
#define IIR_TOD         (1 << 3)        /* Time Out Detected */
#define IIR_IID2        (1 << 2)        /* Interrupt Source Encoded */
#define IIR_IID1        (1 << 1)        /* Interrupt Source Encoded */
#define IIR_IP          (1 << 0)        /* Interrupt Pending (active low) */

#define FCR_ITL2        (1 << 7)        /* Interrupt Trigger Level */
#define FCR_ITL1        (1 << 6)        /* Interrupt Trigger Level */
#define FCR_RESETTF     (1 << 2)        /* Reset Transmitter FIFO */
#define FCR_RESETRF     (1 << 1)        /* Reset Receiver FIFO */
#define FCR_TRFIFOE     (1 << 0)        /* Transmit and Receive FIFO Enable */
#define FCR_ITL_1       (0)
#define FCR_ITL_8       (FCR_ITL1)
#define FCR_ITL_16      (FCR_ITL2)
#define FCR_ITL_32      (FCR_ITL2|FCR_ITL1)

#define LCR_DLAB        (1 << 7)        /* Divisor Latch Access Bit */
#define LCR_SB          (1 << 6)        /* Set Break */
#define LCR_STKYP       (1 << 5)        /* Sticky Parity */
#define LCR_EPS         (1 << 4)        /* Even Parity Select */
#define LCR_PEN         (1 << 3)        /* Parity Enable */
#define LCR_STB         (1 << 2)        /* Stop Bit */
#define LCR_WLS1        (1 << 1)        /* Word Length Select */
#define LCR_WLS0        (1 << 0)        /* Word Length Select */

#define LSR_FIFOE       (1 << 7)        /* FIFO Error Status */
#define LSR_TEMT        (1 << 6)        /* Transmitter Empty */
#define LSR_TDRQ        (1 << 5)        /* Transmit Data Request */
#define LSR_BI          (1 << 4)        /* Break Interrupt */
#define LSR_FE          (1 << 3)        /* Framing Error */
#define LSR_PE          (1 << 2)        /* Parity Error */
#define LSR_OE          (1 << 1)        /* Overrun Error */
#define LSR_DR          (1 << 0)        /* Data Ready */

#define MCR_LOOP        (1 << 4)        */
#define MCR_OUT2        (1 << 3)        /* force MSR_DCD in loopback mode */
#define MCR_OUT1        (1 << 2)        /* force MSR_RI in loopback mode */
#define MCR_RTS         (1 << 1)        /* Request to Send */
#define MCR_DTR         (1 << 0)        /* Data Terminal Ready */

#define MSR_DCD         (1 << 7)        /* Data Carrier Detect */
#define MSR_RI          (1 << 6)        /* Ring Indicator */
#define MSR_DSR         (1 << 5)        /* Data Set Ready */
#define MSR_CTS         (1 << 4)        /* Clear To Send */
#define MSR_DDCD        (1 << 3)        /* Delta Data Carrier Detect */
#define MSR_TERI        (1 << 2)        /* Trailing Edge Ring Indicator */
#define MSR_DDSR        (1 << 1)        /* Delta Data Set Ready */
#define MSR_DCTS        (1 << 0)        /* Delta Clear To Send */

/*
 * IrSR (Infrared Selection Register)
 */
#define IrSR_OFFSET 0x20

#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
#define IrSR_RXPL_POS_IS_ZERO 0x0
#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
#define IrSR_TXPL_POS_IS_ZERO 0x0
#define IrSR_XMODE_PULSE_1_6  (1<<2)
#define IrSR_XMODE_PULSE_3_16 0x0
#define IrSR_RCVEIR_IR_MODE   (1<<1)
#define IrSR_RCVEIR_UART_MODE 0x0
#define IrSR_XMITIR_IR_MODE   (1<<0)
#define IrSR_XMITIR_UART_MODE 0x0

#define IrSR_IR_RECEIVE_ON (\
                IrSR_RXPL_NEG_IS_ZERO | \
                IrSR_TXPL_POS_IS_ZERO | \
                IrSR_XMODE_PULSE_3_16 | \
                IrSR_RCVEIR_IR_MODE   | \
                IrSR_XMITIR_UART_MODE)

#define IrSR_IR_TRANSMIT_ON (\
                IrSR_RXPL_NEG_IS_ZERO | \
                IrSR_TXPL_POS_IS_ZERO | \
                IrSR_XMODE_PULSE_3_16 | \
                IrSR_RCVEIR_UART_MODE | \
                IrSR_XMITIR_IR_MODE)

/*
 * I2C registers
 */
#define IBMR            __REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
#define IDBR            __REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
#define ICR             __REG(0x40301690)  /* I2C Control Register - ICR */
#define ISR             __REG(0x40301698)  /* I2C Status Register - ISR */
#define ISAR            __REG(0x403016A0)  /* I2C Slave Address Register - ISAR */

#define PWRIBMR         __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
#define PWRIDBR         __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
#define PWRICR          __REG(0x40f00190)  /* Power I2C Control Register - ICR */
#define PWRISR          __REG(0x40f00198)  /* Power I2C Status Register - ISR */
#define PWRISAR         __REG(0x40f001A0)  /* Power I2C Slave Address Register-ISAR */

/* ----- Control register bits ---------------------------------------- */

#define ICR_START       0x1             /* start bit */
#define ICR_STOP        0x2             /* stop bit */
#define ICR_ACKNAK      0x4             /* send ACK(0) or NAK(1) */
#define ICR_TB          0x8             /* transfer byte bit */
#define ICR_MA          0x10            /* master abort */
#define ICR_SCLE        0x20            /* master clock enable, mona SCLEA */
#define ICR_IUE         0x40            /* unit enable */
#define ICR_GCD         0x80            /* general call disable */
#define ICR_ITEIE       0x100           /* enable tx interrupts */
#define ICR_IRFIE       0x200           /* enable rx interrupts, mona: DRFIE */
#define ICR_BEIE        0x400           /* enable bus error ints */
#define ICR_SSDIE       0x800           /* slave STOP detected int enable */
#define ICR_ALDIE       0x1000          /* enable arbitration interrupt */
#define ICR_SADIE       0x2000          /* slave address detected int enable */
#define ICR_UR          0x4000          /* unit reset */
#define ICR_FM          0x8000          /* Fast Mode */

/* ----- Status register bits ----------------------------------------- */

#define ISR_RWM         0x1             /* read/write mode */
#define ISR_ACKNAK      0x2             /* ack/nak status */
#define ISR_UB          0x4             /* unit busy */
#define ISR_IBB         0x8             /* bus busy */
#define ISR_SSD         0x10            /* slave stop detected */
#define ISR_ALD         0x20            /* arbitration loss detected */
#define ISR_ITE         0x40            /* tx buffer empty */
#define ISR_IRF         0x80            /* rx buffer full */
#define ISR_GCAD        0x100           /* general call address detected */
#define ISR_SAD         0x200           /* slave address detected */
#define ISR_BED         0x400           /* bus error no ACK/NAK */

/*
 * Serial Audio Controller
 */
/* FIXME the audio defines collide w/ the SA1111 defines.  I don't like these
 * short defines because there is too much chance of namespace collision
 */
/*#define SACR0         __REG(0x40400000)  /  Global Control Register */
/*#define SACR1         __REG(0x40400004)  /  Serial Audio I 2 S/MSB-Justified Control Register */
/*#define SASR0         __REG(0x4040000C)  /  Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
/*#define SAIMR         __REG(0x40400014)  /  Serial Audio Interrupt Mask Register */
/*#define SAICR         __REG(0x40400018)  /  Serial Audio Interrupt Clear Register */
/*#define SADIV         __REG(0x40400060)  /  Audio Clock Divider Register. */
/*#define SADR          __REG(0x40400080)  /  Serial Audio Data Register (TX and RX FIFO access Register). */


/*
 * AC97 Controller registers
 */
#define POCR            __REG(0x40500000)  /* PCM Out Control Register */
#define POCR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */

#define PICR            __REG(0x40500004)  /* PCM In Control Register */
#define PICR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */

#define MCCR            __REG(0x40500008)  /* Mic In Control Register */
#define MCCR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */

#define GCR             __REG(0x4050000C)  /* Global Control Register */
#define GCR_CDONE_IE    (1 << 19)       /* Command Done Interrupt Enable */
#define GCR_SDONE_IE    (1 << 18)       /* Status Done Interrupt Enable */
#define GCR_SECRDY_IEN  (1 << 9)        /* Secondary Ready Interrupt Enable */
#define GCR_PRIRDY_IEN  (1 << 8)        /* Primary Ready Interrupt Enable */
#define GCR_SECRES_IEN  (1 << 5)        /* Secondary Resume Interrupt Enable */
#define GCR_PRIRES_IEN  (1 << 4)        /* Primary Resume Interrupt Enable */
#define GCR_ACLINK_OFF  (1 << 3)        /* AC-link Shut Off */
#define GCR_WARM_RST    (1 << 2)        /* AC97 Warm Reset */
#define GCR_COLD_RST    (1 << 1)        /* AC'97 Cold Reset (0 = active) */
#define GCR_GIE         (1 << 0)        /* Codec GPI Interrupt Enable */

#define POSR            __REG(0x40500010)  /* PCM Out Status Register */
#define POSR_FIFOE      (1 << 4)        /* FIFO error */

#define PISR            __REG(0x40500014)  /* PCM In Status Register */
#define PISR_FIFOE      (1 << 4)        /* FIFO error */

#define MCSR            __REG(0x40500018)  /* Mic In Status Register */
#define MCSR_FIFOE      (1 << 4)        /* FIFO error */

#define GSR             __REG(0x4050001C)  /* Global Status Register */
#define GSR_CDONE       (1 << 19)       /* Command Done */
#define GSR_SDONE       (1 << 18)       /* Status Done */
#define GSR_RDCS        (1 << 15)       /* Read Completion Status */
#define GSR_BIT3SLT12   (1 << 14)       /* Bit 3 of slot 12 */
#define GSR_BIT2SLT12   (1 << 13)       /* Bit 2 of slot 12 */
#define GSR_BIT1SLT12   (1 << 12)       /* Bit 1 of slot 12 */
#define GSR_SECRES      (1 << 11)       /* Secondary Resume Interrupt */
#define GSR_PRIRES      (1 << 10)       /* Primary Resume Interrupt */
#define GSR_SCR         (1 << 9)        /* Secondary Codec Ready */
#define GSR_PCR         (1 << 8)        /*  Primary Codec Ready */
#define GSR_MINT        (1 << 7)        /* Mic In Interrupt */
#define GSR_POINT       (1 << 6)        /* PCM Out Interrupt */
#define GSR_PIINT       (1 << 5)        /* PCM In Interrupt */
#define GSR_MOINT       (1 << 2)        /* Modem Out Interrupt */
#define GSR_MIINT       (1 << 1)        /* Modem In Interrupt */
#define GSR_GSCI        (1 << 0)        /* Codec GPI Status Change Interrupt */

#define CAR             __REG(0x40500020)  /* CODEC Access Register */
#define CAR_CAIP        (1 << 0)        /* Codec Access In Progress */

#define PCDR            __REG(0x40500040)  /* PCM FIFO Data Register */
#define MCDR            __REG(0x40500060)  /* Mic-in FIFO Data Register */

#define MOCR            __REG(0x40500100)  /* Modem Out Control Register */
#define MOCR_FEIE       (1 << 3)        /* FIFO Error */

#define MICR            __REG(0x40500108)  /* Modem In Control Register */
#define MICR_FEIE       (1 << 3)        /* FIFO Error */

#define MOSR            __REG(0x40500110)  /* Modem Out Status Register */
#define MOSR_FIFOE      (1 << 4)        /* FIFO error */

#define MISR            __REG(0x40500118)  /* Modem In Status Register */
#define MISR_FIFOE      (1 << 4)        /* FIFO error */

#define MODR            __REG(0x40500140)  /* Modem FIFO Data Register */

#define PAC_REG_BASE    __REG(0x40500200)  /* Primary Audio Codec */
#define SAC_REG_BASE    __REG(0x40500300)  /* Secondary Audio Codec */
#define PMC_REG_BASE    __REG(0x40500400)  /* Primary Modem Codec */
#define SMC_REG_BASE    __REG(0x40500500)  /* Secondary Modem Codec */


/*
 * USB Device Controller
 */
#ifdef CONFIG_PXA27X

#define UDCCR           __REG(0x40600000)       /* UDC Control Register */
#define UDCCR_UDE       (1 << 0)                /* UDC enable */
#define UDCCR_UDA       (1 << 1)                /* UDC active */
#define UDCCR_RSM       (1 << 2)                /* Device resume */
#define UDCCR_EMCE      (1 << 3)                /* Endpoint Memory Configuration Error */
#define UDCCR_SMAC      (1 << 4)                /* Switch Endpoint Memory to Active Configuration */
#define UDCCR_RESIR     (1 << 29)               /* Resume interrupt request */
#define UDCCR_SUSIR     (1 << 28)               /* Suspend interrupt request */
#define UDCCR_SM        (1 << 28)               /* Suspend interrupt mask */
#define UDCCR_RSTIR     (1 << 27)               /* Reset interrupt request */
#define UDCCR_REM       (1 << 27)               /* Reset interrupt mask */
#define UDCCR_RM        (1 << 29)               /* resume interrupt mask */
#define UDCCR_SRM       (UDCCR_SM|UDCCR_RM)
#define UDCCR_OEN       (1 << 31)               /* On-the-Go Enable */
#define UDCCR_AALTHNP   (1 << 30)               /* A-device Alternate Host Negotiation Protocol Port Support */
#define UDCCR_AHNP      (1 << 29)               /* A-device Host Negotiation Protocol Support */
#define UDCCR_BHNP      (1 << 28)               /* B-device Host Negotiation Protocol Enable */
#define UDCCR_DWRE      (1 << 16)               /* Device Remote Wake-up Enable */
#define UDCCR_ACN       (0x03 << 11)            /* Active UDC configuration Number */
#define UDCCR_ACN_S     11
#define UDCCR_AIN       (0x07 << 8)             /* Active UDC interface Number */
#define UDCCR_AIN_S     8
#define UDCCR_AAISN     (0x07 << 5)             /* Active UDC Alternate Interface  Setting Number */
#define UDCCR_AAISN_S   5

#define UDCCS0          __REG(0x40600100)       /* UDC Endpoint 0 Control/Status Register */
#define UDCCS0_OPR      (1 << 0)                /* OUT packet ready */
#define UDCCS0_IPR      (1 << 1)                /* IN packet ready */
#define UDCCS0_FTF      (1 << 2)                /* Flush Tx FIFO */
#define UDCCS0_DRWF     (1 << 16)               /* Device remote wakeup feature */
#define UDCCS0_SST      (1 << 4)                /* Sent stall */
#define UDCCS0_FST      (1 << 5)                /* Force stall */
#define UDCCS0_RNE      (1 << 6)                /* Receive FIFO no empty */
#define UDCCS0_SA       (1 << 7)                /* Setup active */

/* Bulk IN - Endpoint 1,6,11 */
#define UDCCS1          __REG(0x40600104)  /* UDC Endpoint 1 (IN) Control/Status Register */
#define UDCCS6          __REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
#define UDCCS11         __REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */

#define UDCCS_BI_TFS    (1 << 0)        /* Transmit FIFO service */
#define UDCCS_BI_TPC    (1 << 1)        /* Transmit packet complete */
#define UDCCS_BI_FTF    (1 << 8)        /* Flush Tx FIFO */
#define UDCCS_BI_TUR    (1 << 3)        /* Transmit FIFO underrun */
#define UDCCS_BI_SST    (1 << 4)        /* Sent stall */
#define UDCCS_BI_FST    (1 << 5)        /* Force stall */
#define UDCCS_BI_TSP    (1 << 7)        /* Transmit short packet */

/* Bulk OUT - Endpoint 2,7,12 */
#define UDCCS2          __REG(0x40600108)  /* UDC Endpoint 2 (OUT) Control/Status Register */
#define UDCCS7          __REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
#define UDCCS12         __REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */

#define UDCCS_BO_RFS    (1 << 0)        /* Receive FIFO service */
#define UDCCS_BO_RPC    (1 << 1)        /* Receive packet complete */
#define UDCCS_BO_DME    (1 << 3)        /* DMA enable */
#define UDCCS_BO_SST    (1 << 4)        /* Sent stall */
#define UDCCS_BO_FST    (1 << 5)        /* Force stall */
#define UDCCS_BO_RNE    (1 << 6)        /* Receive FIFO not empty */
#define UDCCS_BO_RSP    (1 << 7)        /* Receive short packet */

/* Isochronous IN - Endpoint 3,8,13 */
#define UDCCS3          __REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
#define UDCCS8          __REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
#define UDCCS13         __REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */

#define UDCCS_II_TFS    (1 << 0)        /* Transmit FIFO service */
#define UDCCS_II_TPC    (1 << 1)        /* Transmit packet complete */
#define UDCCS_II_FTF    (1 << 2)        /* Flush Tx FIFO */
#define UDCCS_II_TUR    (1 << 3)        /* Transmit FIFO underrun */
#define UDCCS_II_TSP    (1 << 7)        /* Transmit short packet */

/* Isochronous OUT - Endpoint 4,9,14 */
#define UDCCS4          __REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
#define UDCCS9          __REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
#define UDCCS14         __REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */

#define UDCCS_IO_RFS    (1 << 0)        /* Receive FIFO service */
#define UDCCS_IO_RPC    (1 << 1)        /* Receive packet complete */
#define UDCCS_IO_ROF    (1 << 3)        /* Receive overflow */
#define UDCCS_IO_DME    (1 << 3)        /* DMA enable */
#define UDCCS_IO_RNE    (1 << 6)        /* Receive FIFO not empty */
#define UDCCS_IO_RSP    (1 << 7)        /* Receive short packet */

/* Interrupt IN - Endpoint 5,10,15 */
#define UDCCS5          __REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
#define UDCCS10         __REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
#define UDCCS15         __REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */

#define UDCCS_INT_TFS   (1 << 0)        /* Transmit FIFO service */
#define UDCCS_INT_TPC   (1 << 1)        /* Transmit packet complete */
#define UDCCS_INT_FTF   (1 << 2)        /* Flush Tx FIFO */
#define UDCCS_INT_TUR   (1 << 3)        /* Transmit FIFO underrun */
#define UDCCS_INT_SST   (1 << 4)        /* Sent stall */
#define UDCCS_INT_FST   (1 << 5)        /* Force stall */
#define UDCCS_INT_TSP   (1 << 7)        /* Transmit short packet */

#define UFNRH           __REG(0x40600060)  /* UDC Frame Number Register High */
#define UFNRL           __REG(0x40600014)  /* UDC Frame Number Register Low */
#define UBCR2           __REG(0x40600208)  /* UDC Byte Count Reg 2 */
#define UBCR4           __REG(0x4060006c)  /* UDC Byte Count Reg 4 */
#define UBCR7           __REG(0x40600070)  /* UDC Byte Count Reg 7 */
#define UBCR9           __REG(0x40600074)  /* UDC Byte Count Reg 9 */
#define UBCR12          __REG(0x40600078)  /* UDC Byte Count Reg 12 */
#define UBCR14          __REG(0x4060007c)  /* UDC Byte Count Reg 14 */
#define UDDR0           __REG(0x40600300)  /* UDC Endpoint 0 Data Register */
#define UDDR1           __REG(0x40600304)  /* UDC Endpoint 1 Data Register */
#define UDDR2           __REG(0x40600308)  /* UDC Endpoint 2 Data Register */
#define UDDR3           __REG(0x40600200)  /* UDC Endpoint 3 Data Register */
#define UDDR4           __REG(0x40600400)  /* UDC Endpoint 4 Data Register */
#define UDDR5           __REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
#define UDDR6           __REG(0x40600600)  /* UDC Endpoint 6 Data Register */
#define UDDR7           __REG(0x40600680)  /* UDC Endpoint 7 Data Register */
#define UDDR8           __REG(0x40600700)  /* UDC Endpoint 8 Data Register */
#define UDDR9           __REG(0x40600900)  /* UDC Endpoint 9 Data Register */
#define UDDR10          __REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
#define UDDR11          __REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
#define UDDR12          __REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
#define UDDR13          __REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
#define UDDR14          __REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
#define UDDR15          __REG(0x406000E0)  /* UDC Endpoint 15 Data Register */

#define UICR0           __REG(0x40600004)  /* UDC Interrupt Control Register 0 */

#define UICR0_IM0       (1 << 0)        /* Interrupt mask ep 0 */
#define UICR0_IM1       (1 << 1)        /* Interrupt mask ep 1 */
#define UICR0_IM2       (1 << 2)        /* Interrupt mask ep 2 */
#define UICR0_IM3       (1 << 3)        /* Interrupt mask ep 3 */
#define UICR0_IM4       (1 << 4)        /* Interrupt mask ep 4 */
#define UICR0_IM5       (1 << 5)        /* Interrupt mask ep 5 */
#define UICR0_IM6       (1 << 6)        /* Interrupt mask ep 6 */
#define UICR0_IM7       (1 << 7)        /* Interrupt mask ep 7 */

#define UICR1           __REG(0x40600008)  /* UDC Interrupt Control Register 1 */

#define UICR1_IM8       (1 << 0)        /* Interrupt mask ep 8 */
#define UICR1_IM9       (1 << 1)        /* Interrupt mask ep 9 */
#define UICR1_IM10      (1 << 2)        /* Interrupt mask ep 10 */
#define UICR1_IM11      (1 << 3)        /* Interrupt mask ep 11 */
#define UICR1_IM12      (1 << 4)        /* Interrupt mask ep 12 */
#define UICR1_IM13      (1 << 5)        /* Interrupt mask ep 13 */
#define UICR1_IM14      (1 << 6)        /* Interrupt mask ep 14 */
#define UICR1_IM15      (1 << 7)        /* Interrupt mask ep 15 */

#define USIR0           __REG(0x4060000C)  /* UDC Status Interrupt Register 0 */

#define USIR0_IR0       (1 << 0)        /* Interrup request ep 0 */
#define USIR0_IR1       (1 << 2)        /* Interrup request ep 1 */
#define USIR0_IR2       (1 << 4)        /* Interrup request ep 2 */
#define USIR0_IR3       (1 << 3)        /* Interrup request ep 3 */
#define USIR0_IR4       (1 << 4)        /* Interrup request ep 4 */
#define USIR0_IR5       (1 << 5)        /* Interrup request ep 5 */
#define USIR0_IR6       (1 << 6)        /* Interrup request ep 6 */
#define USIR0_IR7       (1 << 7)        /* Interrup request ep 7 */

#define USIR1           __REG(0x40600010)  /* UDC Status Interrupt Register 1 */

#define USIR1_IR8       (1 << 0)        /* Interrup request ep 8 */
#define USIR1_IR9       (1 << 1)        /* Interrup request ep 9 */
#define USIR1_IR10      (1 << 2)        /* Interrup request ep 10 */
#define USIR1_IR11      (1 << 3)        /* Interrup request ep 11 */
#define USIR1_IR12      (1 << 4)        /* Interrup request ep 12 */
#define USIR1_IR13      (1 << 5)        /* Interrup request ep 13 */
#define USIR1_IR14      (1 << 6)        /* Interrup request ep 14 */
#define USIR1_IR15      (1 << 7)        /* Interrup request ep 15 */


#define UDCICR0         __REG(0x40600004)       /* UDC Interrupt Control Register0 */
#define UDCICR1         __REG(0x40600008)       /* UDC Interrupt Control Register1 */
#define UDCICR_FIFOERR  (1 << 1)                        /* FIFO Error interrupt for EP */
#define UDCICR_PKTCOMPL (1 << 0)                        /* Packet Complete interrupt for EP */

#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCICR1_IECC    (1 << 31)       /* IntEn - Configuration Change */
#define UDCICR1_IESOF   (1 << 30)       /* IntEn - Start of Frame */
#define UDCICR1_IERU    (1 << 29)       /* IntEn - Resume */
#define UDCICR1_IESU    (1 << 28)       /* IntEn - Suspend */
#define UDCICR1_IERS    (1 << 27)       /* IntEn - Reset */

#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCISR1_IRCC    (1 << 31)       /* IntEn - Configuration Change */
#define UDCISR1_IRSOF   (1 << 30)       /* IntEn - Start of Frame */
#define UDCISR1_IRRU    (1 << 29)       /* IntEn - Resume */
#define UDCISR1_IRSU    (1 << 28)       /* IntEn - Suspend */
#define UDCISR1_IRRS    (1 << 27)       /* IntEn - Reset */


#define UDCFNR                  __REG(0x40600014) /* UDC Frame Number Register */
#define UDCOTGICR               __REG(0x40600018) /* UDC On-The-Go interrupt control */
#define UDCOTGICR_IESF          (1 << 24)       /* OTG SET_FEATURE command recvd */
#define UDCOTGICR_IEXR          (1 << 17)       /* Extra Transciever Interrupt Rising Edge Interrupt Enable */
#define UDCOTGICR_IEXF          (1 << 16)       /* Extra Transciever Interrupt Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV40R       (1 << 9)        /* OTG Vbus Valid 4.0V Rising Edge Interrupt Enable */
#define UDCOTGICR_IEVV40F       (1 << 8)        /* OTG Vbus Valid 4.0V Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV44R       (1 << 7)        /* OTG Vbus Valid 4.4V Rising Edge  Interrupt Enable */
#define UDCOTGICR_IEVV44F       (1 << 6)        /* OTG Vbus Valid 4.4V Falling Edge Interrupt Enable */
#define UDCOTGICR_IESVR         (1 << 5)        /* OTG Session Valid Rising Edge Interrupt Enable */
#define UDCOTGICR_IESVF         (1 << 4)        /* OTG Session Valid Falling Edge Interrupt Enable */
#define UDCOTGICR_IESDR         (1 << 3)        /* OTG A-Device SRP Detect Rising Edge Interrupt Enable */
#define UDCOTGICR_IESDF         (1 << 2)        /* OTG A-Device SRP Detect Falling  Edge Interrupt Enable */
#define UDCOTGICR_IEIDR         (1 << 1)        /* OTG ID Change Rising Edge Interrupt Enable */
#define UDCOTGICR_IEIDF         (1 << 0)        /* OTG ID Change Falling Edge Interrupt Enable */

#define UDCCSN(x)       __REG2(0x40600100, (x) << 2)
#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */

#define UDCCSR0_SA      (1 << 7)        /* Setup Active */
#define UDCCSR0_RNE     (1 << 6)        /* Receive FIFO Not Empty */
#define UDCCSR0_FST     (1 << 5)        /* Force Stall */
#define UDCCSR0_SST     (1 << 4)        /* Sent Stall */
#define UDCCSR0_DME     (1 << 3)        /* DMA Enable */
#define UDCCSR0_FTF     (1 << 2)        /* Flush Transmit FIFO */
#define UDCCSR0_IPR     (1 << 1)        /* IN Packet Ready */
#define UDCCSR0_OPC     (1 << 0)        /* OUT Packet Complete */

#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */

#define UDCCSR_DPE      (1 << 9)        /* Data Packet Error */
#define UDCCSR_FEF      (1 << 8)        /* Flush Endpoint FIFO */
#define UDCCSR_SP       (1 << 7)        /* Short Packet Control/Status */
#define UDCCSR_BNE      (1 << 6)        /* Buffer Not Empty (IN endpoints) */
#define UDCCSR_BNF      (1 << 6)        /* Buffer Not Full (OUT endpoints) */
#define UDCCSR_FST      (1 << 5)        /* Force STALL */
#define UDCCSR_SST      (1 << 4)        /* Sent STALL */
#define UDCCSR_DME      (1 << 3)        /* DMA Enable */
#define UDCCSR_TRN      (1 << 2)        /* Tx/Rx NAK */
#define UDCCSR_PC       (1 << 1)        /* Packet Complete */
#define UDCCSR_FS       (1 << 0)        /* FIFO needs service */

#define UDCBCN(x)       __REG2(0x40600200, (x)<<2)
#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */

#define UDCDN(x)        __REG2(0x40600300, (x)<<2)
#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */

#define UDCCN(x)        __REG2(0x40600400, (x)<<2)
#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */

#define UDCCONR_CN      (0x03 << 25)    /* Configuration Number */
#define UDCCONR_CN_S    (25)
#define UDCCONR_IN      (0x07 << 22)    /* Interface Number */
#define UDCCONR_IN_S    (22)
#define UDCCONR_AISN    (0x07 << 19)    /* Alternate Interface Number */
#define UDCCONR_AISN_S  (19)
#define UDCCONR_EN      (0x0f << 15)    /* Endpoint Number */
#define UDCCONR_EN_S    (15)
#define UDCCONR_ET      (0x03 << 13)    /* Endpoint Type: */
#define UDCCONR_ET_S    (13)
#define UDCCONR_ET_INT  (0x03 << 13)    /* Interrupt */
#define UDCCONR_ET_BULK (0x02 << 13)    /* Bulk */
#define UDCCONR_ET_ISO  (0x01 << 13)    /* Isochronous */
#define UDCCONR_ET_NU   (0x00 << 13)    /* Not used */
#define UDCCONR_ED      (1 << 12)       /* Endpoint Direction */
#define UDCCONR_MPS     (0x3ff << 2)    /* Maximum Packet Size */
#define UDCCONR_MPS_S   (2)
#define UDCCONR_DE      (1 << 1)        /* Double Buffering Enable */
#define UDCCONR_EE      (1 << 0)        /* Endpoint Enable */


#define UDC_INT_FIFOERROR       (0x2)
#define UDC_INT_PACKETCMP       (0x1)
#define UDC_FNR_MASK            (0x7ff)
#define UDCCSR_WR_MASK          (UDCCSR_DME|UDCCSR_FST)
#define UDC_BCR_MASK            (0x3ff)

#endif /* CONFIG_PXA27X */

#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)

/*
 * USB Host Controller
 */
#define OHCI_REGS_BASE  0x4C000000      /* required for ohci driver */
#define UHCREV          __REG(0x4C000000)
#define UHCHCON         __REG(0x4C000004)
#define UHCCOMS         __REG(0x4C000008)
#define UHCINTS         __REG(0x4C00000C)
#define UHCINTE         __REG(0x4C000010)
#define UHCINTD         __REG(0x4C000014)
#define UHCHCCA         __REG(0x4C000018)
#define UHCPCED         __REG(0x4C00001C)
#define UHCCHED         __REG(0x4C000020)
#define UHCCCED         __REG(0x4C000024)
#define UHCBHED         __REG(0x4C000028)
#define UHCBCED         __REG(0x4C00002C)
#define UHCDHEAD        __REG(0x4C000030)
#define UHCFMI          __REG(0x4C000034)
#define UHCFMR          __REG(0x4C000038)
#define UHCFMN          __REG(0x4C00003C)
#define UHCPERS         __REG(0x4C000040)
#define UHCLST          __REG(0x4C000044)
#define UHCRHDA         __REG(0x4C000048)
#define UHCRHDB         __REG(0x4C00004C)
#define UHCRHS          __REG(0x4C000050)
#define UHCRHPS1        __REG(0x4C000054)
#define UHCRHPS2        __REG(0x4C000058)
#define UHCRHPS3        __REG(0x4C00005C)
#define UHCSTAT         __REG(0x4C000060)
#define UHCHR           __REG(0x4C000064)
#define UHCHIE          __REG(0x4C000068)
#define UHCHIT          __REG(0x4C00006C)

#if defined(CONFIG_CPU_MONAHANS)
#define UP2OCR          __REG(0x40600020)
#endif

#define UHCHR_FSBIR     (1<<0)
#define UHCHR_FHR       (1<<1)
#define UHCHR_CGR       (1<<2)
#define UHCHR_SSDC      (1<<3)
#define UHCHR_UIT       (1<<4)
#define UHCHR_SSE       (1<<5)
#define UHCHR_PSPL      (1<<6)
#define UHCHR_PCPL      (1<<7)
#define UHCHR_SSEP0     (1<<9)
#define UHCHR_SSEP1     (1<<10)
#define UHCHR_SSEP2     (1<<11)

#define UHCHIE_UPRIE    (1<<13)
#define UHCHIE_UPS2IE   (1<<12)
#define UHCHIE_UPS1IE   (1<<11)
#define UHCHIE_TAIE     (1<<10)
#define UHCHIE_HBAIE    (1<<8)
#define UHCHIE_RWIE     (1<<7)

#endif

/*
 * Fast Infrared Communication Port
 */
#define ICCR0           __REG(0x40800000)  /* ICP Control Register 0 */
#define ICCR1           __REG(0x40800004)  /* ICP Control Register 1 */
#define ICCR2           __REG(0x40800008)  /* ICP Control Register 2 */
#define ICDR            __REG(0x4080000c)  /* ICP Data Register */
#define ICSR0           __REG(0x40800014)  /* ICP Status Register 0 */
#define ICSR1           __REG(0x40800018)  /* ICP Status Register 1 */

/*
 * Real Time Clock
 */
#define RCNR            __REG(0x40900000)  /* RTC Count Register */
#define RTAR            __REG(0x40900004)  /* RTC Alarm Register */
#define RTSR            __REG(0x40900008)  /* RTC Status Register */
#define RTTR            __REG(0x4090000C)  /* RTC Timer Trim Register */
#define RDAR1           __REG(0x40900018)  /* Wristwatch Day Alarm Reg 1 */
#define RDAR2           __REG(0x40900020)  /* Wristwatch Day Alarm Reg 2 */
#define RYAR1           __REG(0x4090001C)  /* Wristwatch Year Alarm Reg 1 */
#define RYAR2           __REG(0x40900024)  /* Wristwatch Year Alarm Reg 2 */
#define SWAR1           __REG(0x4090002C)  /* Stopwatch Alarm Register 1 */
#define SWAR2           __REG(0x40900030)  /* Stopwatch Alarm Register 2 */
#define PIAR            __REG(0x40900038)  /* Periodic Interrupt Alarm Register */
#define RDCR            __REG(0x40900010)  /* RTC Day Count Register. */
#define RYCR            __REG(0x40900014)  /* RTC Year Count Register. */
#define SWCR            __REG(0x40900028)  /* Stopwatch Count Register */
#define RTCPICR         __REG(0x40900034)  /* Periodic Interrupt Counter Register */

#define RTSR_PICE       (1 << 15)       /* Peridoc interrupt count enable */
#define RTSR_PIALE      (1 << 14)       /* Peridoc interrupt Alarm enable */
#define RTSR_PIAL       (1 << 13)       /* Peridoc  interrupt Alarm status */
#define RTSR_HZE        (1 << 3)        /* HZ interrupt enable */
#define RTSR_ALE        (1 << 2)        /* RTC alarm interrupt enable */
#define RTSR_HZ         (1 << 1)        /* HZ rising-edge detected */
#define RTSR_AL         (1 << 0)        /* RTC alarm detected */

/*
 * OS Timer & Match Registers
 */
#define OSMR0           __REG(0x40A00000)  /* OS Timer Match Register 0 */
#define OSMR1           __REG(0x40A00004)  /* OS Timer Match Register 1 */
#define OSMR2           __REG(0x40A00008)  /* OS Timer Match Register 2 */
#define OSMR3           __REG(0x40A0000C)  /* OS Timer Match Register 3 */
#define OSCR            __REG(0x40A00010)  /* OS Timer Counter Register */
#define OSSR            __REG(0x40A00014)  /* OS Timer Status Register */
#define OWER            __REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
#define OIER            __REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */

#ifdef CONFIG_CPU_MONAHANS
#define OSCR4           __REG(0x40A00040)  /* OS Timer Counter Register 4 */
#define OSCR5           __REG(0x40A00044)  /* OS Timer Counter Register 5 */
#define OSCR6           __REG(0x40A00048)  /* OS Timer Counter Register 6 */
#define OSCR7           __REG(0x40A0004C)  /* OS Timer Counter Register 7 */
#define OSCR8           __REG(0x40A00050)  /* OS Timer Counter Register 8 */
#define OSCR9           __REG(0x40A00054)  /* OS Timer Counter Register 9 */
#define OSCR10          __REG(0x40A00058)  /* OS Timer Counter Register 10 */
#define OSCR11          __REG(0x40A0005C)  /* OS Timer Counter Register 11 */

#define OSMR4           __REG(0x40A00080)  /* OS Timer Match Register 4 */
#define OSMR5           __REG(0x40A00084)  /* OS Timer Match Register 5 */
#define OSMR6           __REG(0x40A00088)  /* OS Timer Match Register 6 */
#define OSMR7           __REG(0x40A0008C)  /* OS Timer Match Register 7 */
#define OSMR8           __REG(0x40A00090)  /* OS Timer Match Register 8 */
#define OSMR9           __REG(0x40A00094)  /* OS Timer Match Register 9 */
#define OSMR10          __REG(0x40A00098)  /* OS Timer Match Register 10 */
#define OSMR11          __REG(0x40A0009C)  /* OS Timer Match Register 11 */

#define OMCR4           __REG(0x40A000C0)  /* OS Match Control Register 4 */
#define OMCR5           __REG(0x40A000C4)  /* OS Match Control Register 5 */
#define OMCR6           __REG(0x40A000C8)  /* OS Match Control Register 6 */
#define OMCR7           __REG(0x40A000CC)  /* OS Match Control Register 7 */
#define OMCR8           __REG(0x40A000D0)  /* OS Match Control Register 8 */
#define OMCR9           __REG(0x40A000D4)  /* OS Match Control Register 9 */
#define OMCR10          __REG(0x40A000D8)  /* OS Match Control Register 10 */
#define OMCR11          __REG(0x40A000DC)  /* OS Match Control Register 11 */

#define OSCR_CLK_FREQ    3250              /* kHz = 3.25 MHz */
#endif /* CONFIG_CPU_MONAHANS */

#define OSSR_M4         (1 << 4)        /* Match status channel 4 */
#define OSSR_M3         (1 << 3)        /* Match status channel 3 */
#define OSSR_M2         (1 << 2)        /* Match status channel 2 */
#define OSSR_M1         (1 << 1)        /* Match status channel 1 */
#define OSSR_M0         (1 << 0)        /* Match status channel 0 */

#define OWER_WME        (1 << 0)        /* Watchdog Match Enable */

#define OIER_E4         (1 << 4)        /* Interrupt enable channel 4 */
#define OIER_E3         (1 << 3)        /* Interrupt enable channel 3 */
#define OIER_E2         (1 << 2)        /* Interrupt enable channel 2 */
#define OIER_E1         (1 << 1)        /* Interrupt enable channel 1 */
#define OIER_E0         (1 << 0)        /* Interrupt enable channel 0 */

/*
 * Pulse Width Modulator
 */
#define PWM_CTRL0       __REG(0x40B00000)  /* PWM 0 Control Register */
#define PWM_PWDUTY0     __REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
#define PWM_PERVAL0     __REG(0x40B00008)  /* PWM 0 Period Control Register */

#define PWM_CTRL1       __REG(0x40C00000)  /* PWM 1Control Register */
#define PWM_PWDUTY1     __REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
#define PWM_PERVAL1     __REG(0x40C00008)  /* PWM 1 Period Control Register */

/*
 * Interrupt Controller
 */
#define ICIP            __REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
#define ICMR            __REG(0x40D00004)  /* Interrupt Controller Mask Register */
#define ICLR            __REG(0x40D00008)  /* Interrupt Controller Level Register */
#define ICFP            __REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
#define ICPR            __REG(0x40D00010)  /* Interrupt Controller Pending Register */
#define ICCR            __REG(0x40D00014)  /* Interrupt Controller Control Register */

#ifdef CONFIG_CPU_MONAHANS
#define ICHP            __REG(0x40D00018)  /* Interrupt Controller Highest Priority Register */
/* Missing: 32 Interrupt priority registers
 * These are the same as beneath for PXA27x: maybe can be merged if
 * GPIO Stuff is same too.
 */
#define ICIP2           __REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2           __REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
#define ICLR2           __REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
#define ICFP2           __REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2           __REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
/* Missing: 2 Interrupt priority registers */
#endif /* CONFIG_CPU_MONAHANS */

/*
 * General Purpose I/O
 */
#define GPLR0           __REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1           __REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2           __REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */

#define GPDR0           __REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
#define GPDR1           __REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
#define GPDR2           __REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */

#define GPSR0           __REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
#define GPSR1           __REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
#define GPSR2           __REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */

#define GPCR0           __REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
#define GPCR1           __REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
#define GPCR2           __REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */

#define GRER0           __REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
#define GRER1           __REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
#define GRER2           __REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */

#define GFER0           __REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
#define GFER1           __REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
#define GFER2           __REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */

#define GEDR0           __REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
#define GEDR1           __REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
#define GEDR2           __REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */

#ifdef CONFIG_CPU_MONAHANS
#define GPLR3           __REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
#define GPDR3           __REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
#define GPSR3           __REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
#define GPCR3           __REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
#define GRER3           __REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
#define GFER3           __REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
#define GEDR3           __REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */

#define GSDR0           __REG(0x40E00400) /* Bit-wise Set of GPDR[31:0] */
#define GSDR1           __REG(0x40E00404) /* Bit-wise Set of GPDR[63:32] */
#define GSDR2           __REG(0x40E00408) /* Bit-wise Set of GPDR[95:64] */
#define GSDR3           __REG(0x40E0040C) /* Bit-wise Set of GPDR[127:96] */

#define GCDR0           __REG(0x40E00420) /* Bit-wise Clear of GPDR[31:0] */
#define GCDR1           __REG(0x40E00424) /* Bit-wise Clear of GPDR[63:32] */
#define GCDR2           __REG(0x40E00428) /* Bit-wise Clear of GPDR[95:64] */
#define GCDR3           __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */

#define GSRER0          __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */
#define GSRER1          __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
#define GSRER2          __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */
#define GSRER3          __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */

#define GCRER0          __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */
#define GCRER1          __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
#define GCRER2          __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */
#define GCRER3          __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */

#define GSFER0          __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */
#define GSFER1          __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
#define GSFER2          __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */
#define GSFER3          __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */

#define GCFER0          __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */
#define GCFER1          __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
#define GCFER2          __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */
#define GCFER3          __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */

#define GSDR(x)         __REG2(0x40E00400, ((x) & 0x60) >> 3)
#define GCDR(x)         __REG2(0x40E00420, ((x) & 0x60) >> 3)

/* Multi-funktion Pin Registers, uncomplete, only:
 *    - GPIO
 *    - Data Flash DF_* pins defined.
 */
#define GPIO0           __REG(0x40e10124)
#define GPIO1           __REG(0x40e10128)
#define GPIO2           __REG(0x40e1012c)
#define GPIO3           __REG(0x40e10130)
#define GPIO4           __REG(0x40e10134)
#define nXCVREN         __REG(0x40e10138)

#define DF_CLE_NOE      __REG(0x40e10204)
#define DF_ALE_WE1      __REG(0x40e10208)

#define DF_SCLK_E       __REG(0x40e10210)
#define nBE0            __REG(0x40e10214)
#define nBE1            __REG(0x40e10218)
#define DF_ALE_WE2      __REG(0x40e1021c)
#define DF_INT_RnB      __REG(0x40e10220)
#define DF_nCS0         __REG(0x40e10224)
#define DF_nCS1         __REG(0x40e10228)
#define DF_nWE          __REG(0x40e1022c)
#define DF_nRE          __REG(0x40e10230)
#define nLUA            __REG(0x40e10234)
#define nLLA            __REG(0x40e10238)
#define DF_ADDR0        __REG(0x40e1023c)
#define DF_ADDR1        __REG(0x40e10240)
#define DF_ADDR2        __REG(0x40e10244)
#define DF_ADDR3        __REG(0x40e10248)
#define DF_IO0          __REG(0x40e1024c)
#define DF_IO8          __REG(0x40e10250)
#define DF_IO1          __REG(0x40e10254)
#define DF_IO9          __REG(0x40e10258)
#define DF_IO2          __REG(0x40e1025c)
#define DF_IO10         __REG(0x40e10260)
#define DF_IO3          __REG(0x40e10264)
#define DF_IO11         __REG(0x40e10268)
#define DF_IO4          __REG(0x40e1026c)
#define DF_IO12         __REG(0x40e10270)
#define DF_IO5          __REG(0x40e10274)
#define DF_IO13         __REG(0x40e10278)
#define DF_IO6          __REG(0x40e1027c)
#define DF_IO14         __REG(0x40e10280)
#define DF_IO7          __REG(0x40e10284)
#define DF_IO15         __REG(0x40e10288)

#define GPIO5           __REG(0x40e1028c)
#define GPIO6           __REG(0x40e10290)
#define GPIO7           __REG(0x40e10294)
#define GPIO8           __REG(0x40e10298)
#define GPIO9           __REG(0x40e1029c)

#define GPIO11          __REG(0x40e102a0)
#define GPIO12          __REG(0x40e102a4)
#define GPIO13          __REG(0x40e102a8)
#define GPIO14          __REG(0x40e102ac)
#define GPIO15          __REG(0x40e102b0)
#define GPIO16          __REG(0x40e102b4)
#define GPIO17          __REG(0x40e102b8)
#define GPIO18          __REG(0x40e102bc)
#define GPIO19          __REG(0x40e102c0)
#define GPIO20          __REG(0x40e102c4)
#define GPIO21          __REG(0x40e102c8)
#define GPIO22          __REG(0x40e102cc)
#define GPIO23          __REG(0x40e102d0)
#define GPIO24          __REG(0x40e102d4)
#define GPIO25          __REG(0x40e102d8)
#define GPIO26          __REG(0x40e102dc)

#define GPIO27          __REG(0x40e10400)
#define GPIO28          __REG(0x40e10404)
#define GPIO29          __REG(0x40e10408)
#define GPIO30          __REG(0x40e1040c)
#define GPIO31          __REG(0x40e10410)
#define GPIO32          __REG(0x40e10414)
#define GPIO33          __REG(0x40e10418)
#define GPIO34          __REG(0x40e1041c)
#define GPIO35          __REG(0x40e10420)
#define GPIO36          __REG(0x40e10424)
#define GPIO37          __REG(0x40e10428)
#define GPIO38          __REG(0x40e1042c)
#define GPIO39          __REG(0x40e10430)
#define GPIO40          __REG(0x40e10434)
#define GPIO41          __REG(0x40e10438)
#define GPIO42          __REG(0x40e1043c)
#define GPIO43          __REG(0x40e10440)
#define GPIO44          __REG(0x40e10444)
#define GPIO45          __REG(0x40e10448)
#define GPIO46          __REG(0x40e1044c)
#define GPIO47          __REG(0x40e10450)
#define GPIO48          __REG(0x40e10454)

#define GPIO10          __REG(0x40e10458)

#define GPIO49          __REG(0x40e1045c)
#define GPIO50          __REG(0x40e10460)
#define GPIO51          __REG(0x40e10464)
#define GPIO52          __REG(0x40e10468)
#define GPIO53          __REG(0x40e1046c)
#define GPIO54          __REG(0x40e10470)
#define GPIO55          __REG(0x40e10474)
#define GPIO56          __REG(0x40e10478)
#define GPIO57          __REG(0x40e1047c)
#define GPIO58          __REG(0x40e10480)
#define GPIO59          __REG(0x40e10484)
#define GPIO60          __REG(0x40e10488)
#define GPIO61          __REG(0x40e1048c)
#define GPIO62          __REG(0x40e10490)

#define GPIO6_2         __REG(0x40e10494)
#define GPIO7_2         __REG(0x40e10498)
#define GPIO8_2         __REG(0x40e1049c)
#define GPIO9_2         __REG(0x40e104a0)
#define GPIO10_2        __REG(0x40e104a4)
#define GPIO11_2        __REG(0x40e104a8)
#define GPIO12_2        __REG(0x40e104ac)
#define GPIO13_2        __REG(0x40e104b0)

#define GPIO63          __REG(0x40e104b4)
#define GPIO64          __REG(0x40e104b8)
#define GPIO65          __REG(0x40e104bc)
#define GPIO66          __REG(0x40e104c0)
#define GPIO67          __REG(0x40e104c4)
#define GPIO68          __REG(0x40e104c8)
#define GPIO69          __REG(0x40e104cc)
#define GPIO70          __REG(0x40e104d0)
#define GPIO71          __REG(0x40e104d4)
#define GPIO72          __REG(0x40e104d8)
#define GPIO73          __REG(0x40e104dc)

#define GPIO14_2        __REG(0x40e104e0)
#define GPIO15_2        __REG(0x40e104e4)
#define GPIO16_2        __REG(0x40e104e8)
#define GPIO17_2        __REG(0x40e104ec)

#define GPIO74          __REG(0x40e104f0)
#define GPIO75          __REG(0x40e104f4)
#define GPIO76          __REG(0x40e104f8)
#define GPIO77          __REG(0x40e104fc)
#define GPIO78          __REG(0x40e10500)
#define GPIO79          __REG(0x40e10504)
#define GPIO80          __REG(0x40e10508)
#define GPIO81          __REG(0x40e1050c)
#define GPIO82          __REG(0x40e10510)
#define GPIO83          __REG(0x40e10514)
#define GPIO84          __REG(0x40e10518)
#define GPIO85          __REG(0x40e1051c)
#define GPIO86          __REG(0x40e10520)
#define GPIO87          __REG(0x40e10524)
#define GPIO88          __REG(0x40e10528)
#define GPIO89          __REG(0x40e1052c)
#define GPIO90          __REG(0x40e10530)
#define GPIO91          __REG(0x40e10534)
#define GPIO92          __REG(0x40e10538)
#define GPIO93          __REG(0x40e1053c)
#define GPIO94          __REG(0x40e10540)
#define GPIO95          __REG(0x40e10544)
#define GPIO96          __REG(0x40e10548)
#define GPIO97          __REG(0x40e1054c)
#define GPIO98          __REG(0x40e10550)

#define GPIO99          __REG(0x40e10600)
#define GPIO100         __REG(0x40e10604)
#define GPIO101         __REG(0x40e10608)
#define GPIO102         __REG(0x40e1060c)
#define GPIO103         __REG(0x40e10610)
#define GPIO104         __REG(0x40e10614)
#define GPIO105         __REG(0x40e10618)
#define GPIO106         __REG(0x40e1061c)
#define GPIO107         __REG(0x40e10620)
#define GPIO108         __REG(0x40e10624)
#define GPIO109         __REG(0x40e10628)
#define GPIO110         __REG(0x40e1062c)
#define GPIO111         __REG(0x40e10630)
#define GPIO112         __REG(0x40e10634)

#define GPIO113         __REG(0x40e10638)
#define GPIO114         __REG(0x40e1063c)
#define GPIO115         __REG(0x40e10640)
#define GPIO116         __REG(0x40e10644)
#define GPIO117         __REG(0x40e10648)
#define GPIO118         __REG(0x40e1064c)
#define GPIO119         __REG(0x40e10650)
#define GPIO120         __REG(0x40e10654)
#define GPIO121         __REG(0x40e10658)
#define GPIO122         __REG(0x40e1065c)
#define GPIO123         __REG(0x40e10660)
#define GPIO124         __REG(0x40e10664)
#define GPIO125         __REG(0x40e10668)
#define GPIO126         __REG(0x40e1066c)
#define GPIO127         __REG(0x40e10670)

#define GPIO0_2         __REG(0x40e10674)
#define GPIO1_2         __REG(0x40e10678)
#define GPIO2_2         __REG(0x40e1067c)
#define GPIO3_2         __REG(0x40e10680)
#define GPIO4_2         __REG(0x40e10684)
#define GPIO5_2         __REG(0x40e10688)

/* MFPR Bit Definitions, see 4-10, Vol. 1 */
#define PULL_SEL        0x8000
#define PULLUP_EN       0x4000
#define PULLDOWN_EN     0x2000

#define DRIVE_FAST_1mA  0x0
#define DRIVE_FAST_2mA  0x400
#define DRIVE_FAST_3mA  0x800
#define DRIVE_FAST_4mA  0xC00
#define DRIVE_SLOW_6mA  0x1000
#define DRIVE_FAST_6mA  0x1400
#define DRIVE_SLOW_10mA 0x1800
#define DRIVE_FAST_10mA 0x1C00

#define SLEEP_SEL       0x200
#define SLEEP_DATA      0x100
#define SLEEP_OE_N      0x80
#define EDGE_CLEAR      0x40
#define EDGE_FALL_EN    0x20
#define EDGE_RISE_EN    0x10

#define AF_SEL_0        0x0     /* Alternate function 0 (reset state) */
#define AF_SEL_1        0x1     /* Alternate function 1 */
#define AF_SEL_2        0x2     /* Alternate function 2 */
#define AF_SEL_3        0x3     /* Alternate function 3 */
#define AF_SEL_4        0x4     /* Alternate function 4 */
#define AF_SEL_5        0x5     /* Alternate function 5 */
#define AF_SEL_6        0x6     /* Alternate function 6 */
#define AF_SEL_7        0x7     /* Alternate function 7 */


#else /* CONFIG_CPU_MONAHANS */

#define GAFR0_L         __REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
#define GAFR0_U         __REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
#define GAFR1_L         __REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
#define GAFR1_U         __REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
#define GAFR2_L         __REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
#define GAFR2_U         __REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO 80 */
#endif /* CONFIG_CPU_MONAHANS */

/* More handy macros.  The argument is a literal GPIO number. */

#define GPIO_bit(x)     (1 << ((x) & 0x1f))

#ifdef CONFIG_PXA27X

/* Interrupt Controller */

#define ICIP2           __REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2           __REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
#define ICLR2           __REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
#define ICFP2           __REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2           __REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */

#define _GPLR(x)        __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define _GPDR(x)        __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define _GPSR(x)        __REG2(0x40E00018, ((x) & 0x60) >> 3)
#define _GPCR(x)        __REG2(0x40E00024, ((x) & 0x60) >> 3)
#define _GRER(x)        __REG2(0x40E00030, ((x) & 0x60) >> 3)
#define _GFER(x)        __REG2(0x40E0003C, ((x) & 0x60) >> 3)
#define _GEDR(x)        __REG2(0x40E00048, ((x) & 0x60) >> 3)
#define _GAFR(x)        __REG2(0x40E00054, ((x) & 0x70) >> 2)

#define GPLR(x)         (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
#define GPDR(x)         (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
#define GPSR(x)         (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
#define GPCR(x)         (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
#define GRER(x)         (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
#define GFER(x)         (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
#define GEDR(x)         (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
#define GAFR(x)         (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
                        ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
#else

#define GPLR(x)         __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define GPDR(x)         __REG2(0x40E0000C, ((x) & 0x60) >> 3)
#define GPSR(x)         __REG2(0x40E00018, ((x) & 0x60) >> 3)
#define GPCR(x)         __REG2(0x40E00024, ((x) & 0x60) >> 3)
#define GRER(x)         __REG2(0x40E00030, ((x) & 0x60) >> 3)
#define GFER(x)         __REG2(0x40E0003C, ((x) & 0x60) >> 3)
#define GEDR(x)         __REG2(0x40E00048, ((x) & 0x60) >> 3)
#define GAFR(x)         __REG2(0x40E00054, ((x) & 0x70) >> 2)

#endif

/* GPIO alternate function assignments */

#define GPIO1_RST               1       /* reset */
#define GPIO6_MMCCLK            6       /* MMC Clock */
#define GPIO8_48MHz             7       /* 48 MHz clock output */
#define GPIO8_MMCCS0            8       /* MMC Chip Select 0 */
#define GPIO9_MMCCS1            9       /* MMC Chip Select 1 */
#define GPIO10_RTCCLK           10      /* real time clock (1 Hz) */
#define GPIO11_3_6MHz           11      /* 3.6 MHz oscillator out */
#define GPIO12_32KHz            12      /* 32 kHz out */
#define GPIO13_MBGNT            13      /* memory controller grant */
#define GPIO14_MBREQ            14      /* alternate bus master request */
#define GPIO15_nCS_1            15      /* chip select 1 */
#define GPIO16_PWM0             16      /* PWM0 output */
#define GPIO17_PWM1             17      /* PWM1 output */
#define GPIO18_RDY              18      /* Ext. Bus Ready */
#define GPIO19_DREQ1            19      /* External DMA Request */
#define GPIO20_DREQ0            20      /* External DMA Request */
#define GPIO23_SCLK             23      /* SSP clock */
#define GPIO24_SFRM             24      /* SSP Frame */
#define GPIO25_STXD             25      /* SSP transmit */
#define GPIO26_SRXD             26      /* SSP receive */
#define GPIO27_SEXTCLK          27      /* SSP ext_clk */
#define GPIO28_BITCLK           28      /* AC97/I2S bit_clk */
#define GPIO29_SDATA_IN         29      /* AC97 Sdata_in0 / I2S Sdata_in */
#define GPIO30_SDATA_OUT        30      /* AC97/I2S Sdata_out */
#define GPIO31_SYNC             31      /* AC97/I2S sync */
#define GPIO32_SDATA_IN1        32      /* AC97 Sdata_in1 */
#define GPIO33_nCS_5            33      /* chip select 5 */
#define GPIO34_FFRXD            34      /* FFUART receive */
#define GPIO34_MMCCS0           34      /* MMC Chip Select 0 */
#define GPIO35_FFCTS            35      /* FFUART Clear to send */
#define GPIO36_FFDCD            36      /* FFUART Data carrier detect */
#define GPIO37_FFDSR            37      /* FFUART data set ready */
#define GPIO38_FFRI             38      /* FFUART Ring Indicator */
#define GPIO39_MMCCS1           39      /* MMC Chip Select 1 */
#define GPIO39_FFTXD            39      /* FFUART transmit data */
#define GPIO40_FFDTR            40      /* FFUART data terminal Ready */
#define GPIO41_FFRTS            41      /* FFUART request to send */
#define GPIO42_BTRXD            42      /* BTUART receive data */
#define GPIO43_BTTXD            43      /* BTUART transmit data */
#define GPIO44_BTCTS            44      /* BTUART clear to send */
#define GPIO45_BTRTS            45      /* BTUART request to send */
#define GPIO46_ICPRXD           46      /* ICP receive data */
#define GPIO46_STRXD            46      /* STD_UART receive data */
#define GPIO47_ICPTXD           47      /* ICP transmit data */
#define GPIO47_STTXD            47      /* STD_UART transmit data */
#define GPIO48_nPOE             48      /* Output Enable for Card Space */
#define GPIO49_nPWE             49      /* Write Enable for Card Space */
#define GPIO50_nPIOR            50      /* I/O Read for Card Space */
#define GPIO51_nPIOW            51      /* I/O Write for Card Space */
#define GPIO52_nPCE_1           52      /* Card Enable for Card Space */
#define GPIO53_nPCE_2           53      /* Card Enable for Card Space */
#define GPIO53_MMCCLK           53      /* MMC Clock */
#define GPIO54_MMCCLK           54      /* MMC Clock */
#define GPIO54_pSKTSEL          54      /* Socket Select for Card Space */
#define GPIO55_nPREG            55      /* Card Address bit 26 */
#define GPIO56_nPWAIT           56      /* Wait signal for Card Space */
#define GPIO57_nIOIS16          57      /* Bus Width select for I/O Card Space */
#define GPIO58_LDD_0            58      /* LCD data pin 0 */
#define GPIO59_LDD_1            59      /* LCD data pin 1 */
#define GPIO60_LDD_2            60      /* LCD data pin 2 */
#define GPIO61_LDD_3            61      /* LCD data pin 3 */
#define GPIO62_LDD_4            62      /* LCD data pin 4 */
#define GPIO63_LDD_5            63      /* LCD data pin 5 */
#define GPIO64_LDD_6            64      /* LCD data pin 6 */
#define GPIO65_LDD_7            65      /* LCD data pin 7 */
#define GPIO66_LDD_8            66      /* LCD data pin 8 */
#define GPIO66_MBREQ            66      /* alternate bus master req */
#define GPIO67_LDD_9            67      /* LCD data pin 9 */
#define GPIO67_MMCCS0           67      /* MMC Chip Select 0 */
#define GPIO68_LDD_10           68      /* LCD data pin 10 */
#define GPIO68_MMCCS1           68      /* MMC Chip Select 1 */
#define GPIO69_LDD_11           69      /* LCD data pin 11 */
#define GPIO69_MMCCLK           69      /* MMC_CLK */
#define GPIO70_LDD_12           70      /* LCD data pin 12 */
#define GPIO70_RTCCLK           70      /* Real Time clock (1 Hz) */
#define GPIO71_LDD_13           71      /* LCD data pin 13 */
#define GPIO71_3_6MHz           71      /* 3.6 MHz Oscillator clock */
#define GPIO72_LDD_14           72      /* LCD data pin 14 */
#define GPIO72_32kHz            72      /* 32 kHz clock */
#define GPIO73_LDD_15           73      /* LCD data pin 15 */
#define GPIO73_MBGNT            73      /* Memory controller grant */
#define GPIO74_LCD_FCLK         74      /* LCD Frame clock */
#define GPIO75_LCD_LCLK         75      /* LCD line clock */
#define GPIO76_LCD_PCLK         76      /* LCD Pixel clock */
#define GPIO77_LCD_ACBIAS       77      /* LCD AC Bias */
#define GPIO78_nCS_2            78      /* chip select 2 */
#define GPIO79_nCS_3            79      /* chip select 3 */
#define GPIO80_nCS_4            80      /* chip select 4 */

/* GPIO alternate function mode & direction */

#define GPIO_IN                 0x000
#define GPIO_OUT                0x080
#define GPIO_ALT_FN_1_IN        0x100
#define GPIO_ALT_FN_1_OUT       0x180
#define GPIO_ALT_FN_2_IN        0x200
#define GPIO_ALT_FN_2_OUT       0x280
#define GPIO_ALT_FN_3_IN        0x300
#define GPIO_ALT_FN_3_OUT       0x380
#define GPIO_MD_MASK_NR         0x07f
#define GPIO_MD_MASK_DIR        0x080
#define GPIO_MD_MASK_FN         0x300

#define GPIO1_RTS_MD            ( 1 | GPIO_ALT_FN_1_IN)
#define GPIO6_MMCCLK_MD         ( 6 | GPIO_ALT_FN_1_OUT)
#define GPIO8_48MHz_MD          ( 8 | GPIO_ALT_FN_1_OUT)
#define GPIO8_MMCCS0_MD         ( 8 | GPIO_ALT_FN_1_OUT)
#define GPIO9_MMCCS1_MD         ( 9 | GPIO_ALT_FN_1_OUT)
#define GPIO10_RTCCLK_MD        (10 | GPIO_ALT_FN_1_OUT)
#define GPIO11_3_6MHz_MD        (11 | GPIO_ALT_FN_1_OUT)
#define GPIO12_32KHz_MD         (12 | GPIO_ALT_FN_1_OUT)
#define GPIO13_MBGNT_MD         (13 | GPIO_ALT_FN_2_OUT)
#define GPIO14_MBREQ_MD         (14 | GPIO_ALT_FN_1_IN)
#define GPIO15_nCS_1_MD         (15 | GPIO_ALT_FN_2_OUT)
#define GPIO16_PWM0_MD          (16 | GPIO_ALT_FN_2_OUT)
#define GPIO17_PWM1_MD          (17 | GPIO_ALT_FN_2_OUT)
#define GPIO18_RDY_MD           (18 | GPIO_ALT_FN_1_IN)
#define GPIO19_DREQ1_MD         (19 | GPIO_ALT_FN_1_IN)
#define GPIO20_DREQ0_MD         (20 | GPIO_ALT_FN_1_IN)
#define GPIO23_SCLK_md          (23 | GPIO_ALT_FN_2_OUT)
#define GPIO24_SFRM_MD          (24 | GPIO_ALT_FN_2_OUT)
#define GPIO25_STXD_MD          (25 | GPIO_ALT_FN_2_OUT)
#define GPIO26_SRXD_MD          (26 | GPIO_ALT_FN_1_IN)
#define GPIO27_SEXTCLK_MD       (27 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_AC97_MD   (28 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_I2S_MD    (28 | GPIO_ALT_FN_2_IN)
#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
#define GPIO29_SDATA_IN_I2S_MD  (29 | GPIO_ALT_FN_2_IN)
#define GPIO30_SDATA_OUT_AC97_MD        (30 | GPIO_ALT_FN_2_OUT)
#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
#define GPIO31_SYNC_AC97_MD     (31 | GPIO_ALT_FN_2_OUT)
#define GPIO31_SYNC_I2S_MD      (31 | GPIO_ALT_FN_1_OUT)
#define GPIO32_SDATA_IN1_AC97_MD        (32 | GPIO_ALT_FN_1_IN)
#define GPIO33_nCS_5_MD         (33 | GPIO_ALT_FN_2_OUT)
#define GPIO34_FFRXD_MD         (34 | GPIO_ALT_FN_1_IN)
#define GPIO34_MMCCS0_MD        (34 | GPIO_ALT_FN_2_OUT)
#define GPIO35_FFCTS_MD         (35 | GPIO_ALT_FN_1_IN)
#define GPIO36_FFDCD_MD         (36 | GPIO_ALT_FN_1_IN)
#define GPIO37_FFDSR_MD         (37 | GPIO_ALT_FN_1_IN)
#define GPIO38_FFRI_MD          (38 | GPIO_ALT_FN_1_IN)
#define GPIO39_MMCCS1_MD        (39 | GPIO_ALT_FN_1_OUT)
#define GPIO39_FFTXD_MD         (39 | GPIO_ALT_FN_2_OUT)
#define GPIO40_FFDTR_MD         (40 | GPIO_ALT_FN_2_OUT)
#define GPIO41_FFRTS_MD         (41 | GPIO_ALT_FN_2_OUT)
#define GPIO42_BTRXD_MD         (42 | GPIO_ALT_FN_1_IN)
#define GPIO43_BTTXD_MD         (43 | GPIO_ALT_FN_2_OUT)
#define GPIO44_BTCTS_MD         (44 | GPIO_ALT_FN_1_IN)
#define GPIO45_BTRTS_MD         (45 | GPIO_ALT_FN_2_OUT)
#define GPIO46_ICPRXD_MD        (46 | GPIO_ALT_FN_1_IN)
#define GPIO46_STRXD_MD         (46 | GPIO_ALT_FN_2_IN)
#define GPIO47_ICPTXD_MD        (47 | GPIO_ALT_FN_2_OUT)
#define GPIO47_STTXD_MD         (47 | GPIO_ALT_FN_1_OUT)
#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
#define GPIO49_nPWE_MD          (49 | GPIO_ALT_FN_2_OUT)
#define GPIO50_nPIOR_MD         (50 | GPIO_ALT_FN_2_OUT)
#define GPIO51_nPIOW_MD         (51 | GPIO_ALT_FN_2_OUT)
#define GPIO52_nPCE_1_MD        (52 | GPIO_ALT_FN_2_OUT)
#define GPIO53_nPCE_2_MD        (53 | GPIO_ALT_FN_2_OUT)
#define GPIO53_MMCCLK_MD        (53 | GPIO_ALT_FN_1_OUT)
#define GPIO54_MMCCLK_MD        (54 | GPIO_ALT_FN_1_OUT)
#define GPIO54_pSKTSEL_MD       (54 | GPIO_ALT_FN_2_OUT)
#define GPIO55_nPREG_MD         (55 | GPIO_ALT_FN_2_OUT)
#define GPIO56_nPWAIT_MD        (56 | GPIO_ALT_FN_1_IN)
#define GPIO57_nIOIS16_MD       (57 | GPIO_ALT_FN_1_IN)
#define GPIO58_LDD_0_MD         (58 | GPIO_ALT_FN_2_OUT)
#define GPIO59_LDD_1_MD         (59 | GPIO_ALT_FN_2_OUT)
#define GPIO60_LDD_2_MD         (60 | GPIO_ALT_FN_2_OUT)
#define GPIO61_LDD_3_MD         (61 | GPIO_ALT_FN_2_OUT)
#define GPIO62_LDD_4_MD         (62 | GPIO_ALT_FN_2_OUT)
#define GPIO63_LDD_5_MD         (63 | GPIO_ALT_FN_2_OUT)
#define GPIO64_LDD_6_MD         (64 | GPIO_ALT_FN_2_OUT)
#define GPIO65_LDD_7_MD         (65 | GPIO_ALT_FN_2_OUT)
#define GPIO66_LDD_8_MD         (66 | GPIO_ALT_FN_2_OUT)
#define GPIO66_MBREQ_MD         (66 | GPIO_ALT_FN_1_IN)
#define GPIO67_LDD_9_MD         (67 | GPIO_ALT_FN_2_OUT)
#define GPIO67_MMCCS0_MD        (67 | GPIO_ALT_FN_1_OUT)
#define GPIO68_LDD_10_MD        (68 | GPIO_ALT_FN_2_OUT)
#define GPIO68_MMCCS1_MD        (68 | GPIO_ALT_FN_1_OUT)
#define GPIO69_LDD_11_MD        (69 | GPIO_ALT_FN_2_OUT)
#define GPIO69_MMCCLK_MD        (69 | GPIO_ALT_FN_1_OUT)
#define GPIO70_LDD_12_MD        (70 | GPIO_ALT_FN_2_OUT)
#define GPIO70_RTCCLK_MD        (70 | GPIO_ALT_FN_1_OUT)
#define GPIO71_LDD_13_MD        (71 | GPIO_ALT_FN_2_OUT)
#define GPIO71_3_6MHz_MD        (71 | GPIO_ALT_FN_1_OUT)
#define GPIO72_LDD_14_MD        (72 | GPIO_ALT_FN_2_OUT)
#define GPIO72_32kHz_MD         (72 | GPIO_ALT_FN_1_OUT)
#define GPIO73_LDD_15_MD        (73 | GPIO_ALT_FN_2_OUT)
#define GPIO73_MBGNT_MD         (73 | GPIO_ALT_FN_1_OUT)
#define GPIO74_LCD_FCLK_MD      (74 | GPIO_ALT_FN_2_OUT)
#define GPIO75_LCD_LCLK_MD      (75 | GPIO_ALT_FN_2_OUT)
#define GPIO76_LCD_PCLK_MD      (76 | GPIO_ALT_FN_2_OUT)
#define GPIO77_LCD_ACBIAS_MD    (77 | GPIO_ALT_FN_2_OUT)
#define GPIO78_nCS_2_MD         (78 | GPIO_ALT_FN_2_OUT)
#define GPIO79_nCS_3_MD         (79 | GPIO_ALT_FN_2_OUT)
#define GPIO80_nCS_4_MD         (80 | GPIO_ALT_FN_2_OUT)

#define GPIO117_SCL             (117 | GPIO_ALT_FN_1_OUT)
#define GPIO118_SDA             (118 | GPIO_ALT_FN_1_OUT)

/*
 * Power Manager
 */
#ifdef CONFIG_CPU_MONAHANS

#define ASCR            __REG(0x40F40000)  /* Application Subsystem Power Status/Control Register */
#define ARSR            __REG(0x40F40004)  /* Application Subsystem Reset Status Register */
#define AD3ER           __REG(0x40F40008)  /* Application Subsystem D3 state Wakeup Enable Register */
#define AD3SR           __REG(0x40F4000C)  /* Application Subsystem D3 state Wakeup Status Register */
#define AD2D0ER         __REG(0x40F40010)  /* Application Subsystem D2 to D0 state Wakeup Enable Register */
#define AD2D0SR         __REG(0x40F40014)  /* Application Subsystem D2 to D0 state Wakeup Status Register */
#define AD2D1ER         __REG(0x40F40018)  /* Application Subsystem D2 to D1 state Wakeup Enable Register */
#define AD2D1SR         __REG(0x40F4001C)  /* Application Subsystem D2 to D1 state Wakeup Status Register */
#define AD1D0ER         __REG(0x40F40020)  /* Application Subsystem D1 to D0 state Wakeup Enable Register */
#define AD1D0SR         __REG(0x40F40024)  /* Application Subsystem D1 to D0 state Wakeup Status Register */
#define ASDCNT          __REG(0x40F40028)  /* Application Subsystem SRAM Drowsy Count Register */
#define AD3R            __REG(0x40F40030)  /* Application Subsystem D3 State Configuration Register */
#define AD2R            __REG(0x40F40034)  /* Application Subsystem D2 State Configuration Register */
#define AD1R            __REG(0x40F40038)  /* Application Subsystem D1 State Configuration Register */

#define PMCR            __REG(0x40F50000)  /* Power Manager Control Register */
#define PSR             __REG(0x40F50004)  /* Power Manager S2 Status Register */
#define PSPR            __REG(0x40F50008)  /* Power Manager Scratch Pad Register */
#define PCFR            __REG(0x40F5000C)  /* Power Manager General Configuration Register */
#define PWER            __REG(0x40F50010)  /* Power Manager Wake-up Enable Register */
#define PWSR            __REG(0x40F50014)  /* Power Manager Wake-up Status Register */
#define PECR            __REG(0x40F50018)  /* Power Manager EXT_WAKEUP[1:0] Control Register */
#define DCDCSR          __REG(0x40F50080)  /* DC-DC Controller Status Register */
#define PVCR            __REG(0x40F50100)  /* Power Manager Voltage Change Control Register */
#define    PCMD(x) __REG(0x40F50110 + x*4)
#define    PCMD0   __REG(0x40F50110 + 0 * 4)
#define    PCMD1   __REG(0x40F50110 + 1 * 4)
#define    PCMD2   __REG(0x40F50110 + 2 * 4)
#define    PCMD3   __REG(0x40F50110 + 3 * 4)
#define    PCMD4   __REG(0x40F50110 + 4 * 4)
#define    PCMD5   __REG(0x40F50110 + 5 * 4)
#define    PCMD6   __REG(0x40F50110 + 6 * 4)
#define    PCMD7   __REG(0x40F50110 + 7 * 4)
#define    PCMD8   __REG(0x40F50110 + 8 * 4)
#define    PCMD9   __REG(0x40F50110 + 9 * 4)
#define    PCMD10  __REG(0x40F50110 + 10 * 4)
#define    PCMD11  __REG(0x40F50110 + 11 * 4)
#define    PCMD12  __REG(0x40F50110 + 12 * 4)
#define    PCMD13  __REG(0x40F50110 + 13 * 4)
#define    PCMD14  __REG(0x40F50110 + 14 * 4)
#define    PCMD15  __REG(0x40F50110 + 15 * 4)
#define    PCMD16  __REG(0x40F50110 + 16 * 4)
#define    PCMD17  __REG(0x40F50110 + 17 * 4)
#define    PCMD18  __REG(0x40F50110 + 18 * 4)
#define    PCMD19  __REG(0x40F50110 + 19 * 4)
#define    PCMD20  __REG(0x40F50110 + 20 * 4)
#define    PCMD21  __REG(0x40F50110 + 21 * 4)
#define    PCMD22  __REG(0x40F50110 + 22 * 4)
#define    PCMD23  __REG(0x40F50110 + 23 * 4)
#define    PCMD24  __REG(0x40F50110 + 24 * 4)
#define    PCMD25  __REG(0x40F50110 + 25 * 4)
#define    PCMD26  __REG(0x40F50110 + 26 * 4)
#define    PCMD27  __REG(0x40F50110 + 27 * 4)
#define    PCMD28  __REG(0x40F50110 + 28 * 4)
#define    PCMD29  __REG(0x40F50110 + 29 * 4)
#define    PCMD30  __REG(0x40F50110 + 30 * 4)
#define    PCMD31  __REG(0x40F50110 + 31 * 4)

#define    PCMD_MBC    (1<<12)
#define    PCMD_DCE    (1<<11)
#define    PCMD_LC     (1<<10)
#define    PCMD_SQC    (3<<8)  /* only 00 and 01 are valid */

#define PVCR_FVC                   (0x1 << 28)
#define PVCR_VCSA                  (0x1<<14)
#define PVCR_CommandDelay          (0xf80)
#define PVCR_ReadPointer           (0x01f00000)
#define PVCR_SlaveAddress          (0x7f)

#else /* ifdef CONFIG_CPU_MONAHANS */

#define PMCR            __REG(0x40F00000)  /* Power Manager Control Register */
#define PSSR            __REG(0x40F00004)  /* Power Manager Sleep Status Register */
#define PSPR            __REG(0x40F00008)  /* Power Manager Scratch Pad Register */
#define PWER            __REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
#define PRER            __REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
#define PFER            __REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
#define PEDR            __REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
#define PCFR            __REG(0x40F0001C)  /* Power Manager General Configuration Register */
#define PGSR0           __REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
#define PGSR1           __REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
#define PGSR2           __REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
#define PGSR3           __REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
#define RCSR            __REG(0x40F00030)  /* Reset Controller Status Register */

#define    PSLR    __REG(0x40F00034)    /* Power Manager Sleep Config Register */
#define    PSTR    __REG(0x40F00038)    /* Power Manager Standby Config Register */
#define    PSNR    __REG(0x40F0003C)    /* Power Manager Sense Config Register */
#define    PVCR    __REG(0x40F00040)    /* Power Manager VoltageControl Register */
#define    PKWR    __REG(0x40F00050)    /* Power Manager KB Wake-up Enable Reg */
#define    PKSR    __REG(0x40F00054)    /* Power Manager KB Level-Detect Register */
#define    PCMD(x) __REG(0x40F00080 + x*4)
#define    PCMD0   __REG(0x40F00080 + 0 * 4)
#define    PCMD1   __REG(0x40F00080 + 1 * 4)
#define    PCMD2   __REG(0x40F00080 + 2 * 4)
#define    PCMD3   __REG(0x40F00080 + 3 * 4)
#define    PCMD4   __REG(0x40F00080 + 4 * 4)
#define    PCMD5   __REG(0x40F00080 + 5 * 4)
#define    PCMD6   __REG(0x40F00080 + 6 * 4)
#define    PCMD7   __REG(0x40F00080 + 7 * 4)
#define    PCMD8   __REG(0x40F00080 + 8 * 4)
#define    PCMD9   __REG(0x40F00080 + 9 * 4)
#define    PCMD10  __REG(0x40F00080 + 10 * 4)
#define    PCMD11  __REG(0x40F00080 + 11 * 4)
#define    PCMD12  __REG(0x40F00080 + 12 * 4)
#define    PCMD13  __REG(0x40F00080 + 13 * 4)
#define    PCMD14  __REG(0x40F00080 + 14 * 4)
#define    PCMD15  __REG(0x40F00080 + 15 * 4)
#define    PCMD16  __REG(0x40F00080 + 16 * 4)
#define    PCMD17  __REG(0x40F00080 + 17 * 4)
#define    PCMD18  __REG(0x40F00080 + 18 * 4)
#define    PCMD19  __REG(0x40F00080 + 19 * 4)
#define    PCMD20  __REG(0x40F00080 + 20 * 4)
#define    PCMD21  __REG(0x40F00080 + 21 * 4)
#define    PCMD22  __REG(0x40F00080 + 22 * 4)
#define    PCMD23  __REG(0x40F00080 + 23 * 4)
#define    PCMD24  __REG(0x40F00080 + 24 * 4)
#define    PCMD25  __REG(0x40F00080 + 25 * 4)
#define    PCMD26  __REG(0x40F00080 + 26 * 4)
#define    PCMD27  __REG(0x40F00080 + 27 * 4)
#define    PCMD28  __REG(0x40F00080 + 28 * 4)
#define    PCMD29  __REG(0x40F00080 + 29 * 4)
#define    PCMD30  __REG(0x40F00080 + 30 * 4)
#define    PCMD31  __REG(0x40F00080 + 31 * 4)

#define    PCMD_MBC    (1<<12)
#define    PCMD_DCE    (1<<11)
#define    PCMD_LC     (1<<10)
/* FIXME:  PCMD_SQC need be checked.   */
#define    PCMD_SQC    (3<<8)  /* currently only bit 8 is changerable, */
                                /* bit 9 should be 0 all day. */
#define PVCR_VCSA                  (0x1<<14)
#define PVCR_CommandDelay          (0xf80)
/* define MACRO for Power Manager General Configuration Register (PCFR) */
#define PCFR_FVC                   (0x1 << 10)
#define PCFR_PI2C_EN               (0x1 << 6)

#define PSSR_OTGPH      (1 << 6)        /* OTG Peripheral control Hold */
#define PSSR_RDH        (1 << 5)        /* Read Disable Hold */
#define PSSR_PH         (1 << 4)        /* Peripheral Control Hold */
#define PSSR_VFS        (1 << 2)        /* VDD Fault Status */
#define PSSR_BFS        (1 << 1)        /* Battery Fault Status */
#define PSSR_SSS        (1 << 0)        /* Software Sleep Status */

#define PCFR_DS         (1 << 3)        /* Deep Sleep Mode */
#define PCFR_FS         (1 << 2)        /* Float Static Chip Selects */
#define PCFR_FP         (1 << 1)        /* Float PCMCIA controls */
#define PCFR_OPDE       (1 << 0)        /* 3.6864 MHz oscillator power-down enable */

#define RCSR_GPR        (1 << 3)        /* GPIO Reset */
#define RCSR_SMR        (1 << 2)        /* Sleep Mode */
#define RCSR_WDR        (1 << 1)        /* Watchdog Reset */
#define RCSR_HWR        (1 << 0)        /* Hardware Reset */

#endif /* CONFIG_CPU_MONAHANS */

/*
 * SSP Serial Port Registers
 */
#define SSCR0           __REG(0x41000000)  /* SSP Control Register 0 */
#define SSCR1           __REG(0x41000004)  /* SSP Control Register 1 */
#define SSSR            __REG(0x41000008)  /* SSP Status Register */
#define SSITR           __REG(0x4100000C)  /* SSP Interrupt Test Register */
#define SSDR            __REG(0x41000010)  /* (Write / Read) SSP Data Write Register/SSP Data Read Register */

/*
 * MultiMediaCard (MMC) controller
 */
#define MMC_STRPCL      __REG(0x41100000)  /* Control to start and stop MMC clock */
#define MMC_STAT        __REG(0x41100004)  /* MMC Status Register (read only) */
#define MMC_CLKRT       __REG(0x41100008)  /* MMC clock rate */
#define MMC_SPI         __REG(0x4110000c)  /* SPI mode control bits */
#define MMC_CMDAT       __REG(0x41100010)  /* Command/response/data sequence control */
#define MMC_RESTO       __REG(0x41100014)  /* Expected response time out */
#define MMC_RDTO        __REG(0x41100018)  /* Expected data read time out */
#define MMC_BLKLEN      __REG(0x4110001c)  /* Block length of data transaction */
#define MMC_NOB         __REG(0x41100020)  /* Number of blocks, for block mode */
#define MMC_PRTBUF      __REG(0x41100024)  /* Partial MMC_TXFIFO FIFO written */
#define MMC_I_MASK      __REG(0x41100028)  /* Interrupt Mask */
#define MMC_I_REG       __REG(0x4110002c)  /* Interrupt Register (read only) */
#define MMC_CMD         __REG(0x41100030)  /* Index of current command */
#define MMC_ARGH        __REG(0x41100034)  /* MSW part of the current command argument */
#define MMC_ARGL        __REG(0x41100038)  /* LSW part of the current command argument */
#define MMC_RES         __REG(0x4110003c)  /* Response FIFO (read only) */
#define MMC_RXFIFO      __REG(0x41100040)  /* Receive FIFO (read only) */
#define MMC_TXFIFO      __REG(0x41100044)  /* Transmit FIFO (write only) */

/*
 * Core Clock
 */

#if defined(CONFIG_CPU_MONAHANS)
#define ACCR            __REG(0x41340000)  /* Application Subsystem Clock Configuration Register */
#define ACSR            __REG(0x41340004)  /* Application Subsystem Clock Status Register */
#define AICSR           __REG(0x41340008)  /* Application Subsystem Interrupt Control/Status Register */
#define CKENA           __REG(0x4134000C)  /* A Clock Enable Register */
#define CKENB           __REG(0x41340010)  /* B Clock Enable Register */
#define AC97_DIV        __REG(0x41340014)  /* AC97 clock divisor value register */

#define ACCR_SMC_MASK   0x03800000      /* Static Memory Controller Frequency Select */
#define ACCR_SRAM_MASK  0x000c0000      /* SRAM Controller Frequency Select */
#define ACCR_FC_MASK    0x00030000      /* Frequency Change Frequency Select */
#define ACCR_HSIO_MASK  0x0000c000      /* High Speed IO Frequency Select */
#define ACCR_DDR_MASK   0x00003000      /* DDR Memory Controller Frequency Select */
#define ACCR_XN_MASK    0x00000700      /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
#define ACCR_XL_MASK    0x0000001f      /* Crystal Frequency to Memory Frequency Multiplier */
#define ACCR_XPDIS      (1 << 31)
#define ACCR_SPDIS      (1 << 30)
#define ACCR_13MEND1    (1 << 27)
#define ACCR_D0CS       (1 << 26)
#define ACCR_13MEND2    (1 << 21)
#define ACCR_PCCE       (1 << 11)

#define CKENA_30_MSL0   (1 << 30)       /* MSL0 Interface Unit Clock Enable */
#define CKENA_29_SSP4   (1 << 29)       /* SSP3 Unit Clock Enable */
#define CKENA_28_SSP3   (1 << 28)       /* SSP2 Unit Clock Enable */
#define CKENA_27_SSP2   (1 << 27)       /* SSP1 Unit Clock Enable */
#define CKENA_26_SSP1   (1 << 26)       /* SSP0 Unit Clock Enable */
#define CKENA_25_TSI    (1 << 25)       /* TSI Clock Enable */
#define CKENA_24_AC97   (1 << 24)       /* AC97 Unit Clock Enable */
#define CKENA_23_STUART (1 << 23)       /* STUART Unit Clock Enable */
#define CKENA_22_FFUART (1 << 22)       /* FFUART Unit Clock Enable */
#define CKENA_21_BTUART (1 << 21)       /* BTUART Unit Clock Enable */
#define CKENA_20_UDC    (1 << 20)       /* UDC Clock Enable */
#define CKENA_19_TPM    (1 << 19)       /* TPM Unit Clock Enable */
#define CKENA_18_USIM1  (1 << 18)       /* USIM1 Unit Clock Enable */
#define CKENA_17_USIM0  (1 << 17)       /* USIM0 Unit Clock Enable */
#define CKENA_15_CIR    (1 << 15)       /* Consumer IR Clock Enable */
#define CKENA_14_KEY    (1 << 14)       /* Keypad Controller Clock Enable */
#define CKENA_13_MMC1   (1 << 13)       /* MMC1 Clock Enable */
#define CKENA_12_MMC0   (1 << 12)       /* MMC0 Clock Enable */
#define CKENA_11_FLASH  (1 << 11)       /* Boot ROM Clock Enable */
#define CKENA_10_SRAM   (1 << 10)       /* SRAM Controller Clock Enable */
#define CKENA_9_SMC     (1 << 9)        /* Static Memory Controller */
#define CKENA_8_DMC     (1 << 8)        /* Dynamic Memory Controller */
#define CKENA_7_GRAPHICS (1 << 7)       /* 2D Graphics Clock Enable */
#define CKENA_6_USBCLI  (1 << 6)        /* USB Client Unit Clock Enable */
#define CKENA_4_NAND    (1 << 4)        /* NAND Flash Controller Clock Enable */
#define CKENA_3_CAMERA  (1 << 3)        /* Camera Interface Clock Enable */
#define CKENA_2_USBHOST (1 << 2)        /* USB Host Unit Clock Enable */
#define CKENA_1_LCD     (1 << 1)        /* LCD Unit Clock Enable */

#define CKENB_9_SYSBUS2 (1 << 9)        /* System bus 2 */
#define CKENB_8_1WIRE   (1 << 8)        /* One Wire Interface Unit Clock Enable */
#define CKENB_7_GPIO    (1 << 7)        /* GPIO Clock Enable */
#define CKENB_6_IRQ     (1 << 6)        /* Interrupt Controller Clock Enable */
#define CKENB_4_I2C     (1 << 4)        /* I2C Unit Clock Enable */
#define CKENB_1_PWM1    (1 << 1)        /* PWM2 & PWM3 Clock Enable */
#define CKENB_0_PWM0    (1 << 0)        /* PWM0 & PWM1 Clock Enable */

#else /* if defined CONFIG_CPU_MONAHANS */

#define CCCR            __REG(0x41300000)  /* Core Clock Configuration Register */
#define CKEN            __REG(0x41300004)  /* Clock Enable Register */
#define OSCC            __REG(0x41300008)  /* Oscillator Configuration Register */

#define CCCR_N_MASK     0x0380          /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
#if !defined(CONFIG_PXA27X)
#define CCCR_M_MASK     0x0060          /* Memory Frequency to Run Mode Frequency Multiplier */
#endif
#define CCCR_L_MASK     0x001f          /* Crystal Frequency to Memory Frequency Multiplier */

#define CKEN24_CAMERA   (1 << 24)       /* Camera Interface Clock Enable */
#define CKEN23_SSP1     (1 << 23)       /* SSP1 Unit Clock Enable */
#define CKEN22_MEMC     (1 << 22)       /* Memory Controller Clock Enable */
#define CKEN21_MEMSTK   (1 << 21)       /* Memory Stick Host Controller */
#define CKEN20_IM       (1 << 20)       /* Internal Memory Clock Enable */
#define CKEN19_KEYPAD   (1 << 19)       /* Keypad Interface Clock Enable */
#define CKEN18_USIM     (1 << 18)       /* USIM Unit Clock Enable */
#define CKEN17_MSL      (1 << 17)       /* MSL Unit Clock Enable */
#define CKEN16_LCD      (1 << 16)       /* LCD Unit Clock Enable */
#define CKEN15_PWRI2C   (1 << 15)       /* PWR I2C Unit Clock Enable */
#define CKEN14_I2C      (1 << 14)       /* I2C Unit Clock Enable */
#define CKEN13_FICP     (1 << 13)       /* FICP Unit Clock Enable */
#define CKEN12_MMC      (1 << 12)       /* MMC Unit Clock Enable */
#define CKEN11_USB      (1 << 11)       /* USB Unit Clock Enable */
#if defined(CONFIG_PXA27X)
#define CKEN10_USBHOST  (1 << 10)       /* USB Host Unit Clock Enable */
#define CKEN24_CAMERA   (1 << 24)       /* Camera Unit Clock Enable */
#endif
#define CKEN8_I2S       (1 << 8)        /* I2S Unit Clock Enable */
#define CKEN7_BTUART    (1 << 7)        /* BTUART Unit Clock Enable */
#define CKEN6_FFUART    (1 << 6)        /* FFUART Unit Clock Enable */
#define CKEN5_STUART    (1 << 5)        /* STUART Unit Clock Enable */
#define CKEN3_SSP       (1 << 3)        /* SSP Unit Clock Enable */
#define CKEN2_AC97      (1 << 2)        /* AC97 Unit Clock Enable */
#define CKEN1_PWM1      (1 << 1)        /* PWM1 Clock Enable */
#define CKEN0_PWM0      (1 << 0)        /* PWM0 Clock Enable */

#define OSCC_OON        (1 << 1)        /* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK        (1 << 0)        /* 32.768kHz OOK (read-only bit) */

#if !defined(CONFIG_PXA27X)
#define  CCCR_L09      (0x1F)
#define  CCCR_L27      (0x1)
#define  CCCR_L32      (0x2)
#define  CCCR_L36      (0x3)
#define  CCCR_L40      (0x4)
#define  CCCR_L45      (0x5)

#define  CCCR_M1       (0x1 << 5)
#define  CCCR_M2       (0x2 << 5)
#define  CCCR_M4       (0x3 << 5)

#define  CCCR_N10      (0x2 << 7)
#define  CCCR_N15      (0x3 << 7)
#define  CCCR_N20      (0x4 << 7)
#define  CCCR_N25      (0x5 << 7)
#define  CCCR_N30      (0x6 << 7)
#endif

#endif /* CONFIG_CPU_MONAHANS */

/*
 * LCD
 */
#define LCCR0           __REG(0x44000000)  /* LCD Controller Control Register 0 */
#define LCCR1           __REG(0x44000004)  /* LCD Controller Control Register 1 */
#define LCCR2           __REG(0x44000008)  /* LCD Controller Control Register 2 */
#define LCCR3           __REG(0x4400000C)  /* LCD Controller Control Register 3 */
#define DFBR0           __REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
#define DFBR1           __REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
#define LCSR0           __REG(0x44000038)  /* LCD Controller Status Register */
#define LCSR1           __REG(0x44000034)  /* LCD Controller Status Register */
#define LIIDR           __REG(0x4400003C)  /* LCD Controller Interrupt ID Register */
#define TMEDRGBR        __REG(0x44000040)  /* TMED RGB Seed Register */
#define TMEDCR          __REG(0x44000044)  /* TMED Control Register */

#define FDADR0          __REG(0x44000200)  /* DMA Channel 0 Frame Descriptor Address Register */
#define FSADR0          __REG(0x44000204)  /* DMA Channel 0 Frame Source Address Register */
#define FIDR0           __REG(0x44000208)  /* DMA Channel 0 Frame ID Register */
#define LDCMD0          __REG(0x4400020C)  /* DMA Channel 0 Command Register */
#define FDADR1          __REG(0x44000210)  /* DMA Channel 1 Frame Descriptor Address Register */
#define FSADR1          __REG(0x44000214)  /* DMA Channel 1 Frame Source Address Register */
#define FIDR1           __REG(0x44000218)  /* DMA Channel 1 Frame ID Register */
#define LDCMD1          __REG(0x4400021C)  /* DMA Channel 1 Command Register */

#define LCCR0_ENB       (1 << 0)        /* LCD Controller enable */
#define LCCR0_CMS       (1 << 1)        /* Color = 0, Monochrome = 1 */
#define LCCR0_SDS       (1 << 2)        /* Single Panel = 0, Dual Panel = 1 */
#define LCCR0_LDM       (1 << 3)        /* LCD Disable Done Mask */
#define LCCR0_SFM       (1 << 4)        /* Start of frame mask */
#define LCCR0_IUM       (1 << 5)        /* Input FIFO underrun mask */
#define LCCR0_EFM       (1 << 6)        /* End of Frame mask */
#define LCCR0_PAS       (1 << 7)        /* Passive = 0, Active = 1 */
#define LCCR0_BLE       (1 << 8)        /* Little Endian = 0, Big Endian = 1 */
#define LCCR0_DPD       (1 << 9)        /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */
#define LCCR0_DIS       (1 << 10)       /* LCD Disable */
#define LCCR0_QDM       (1 << 11)       /* LCD Quick Disable mask */
#define LCCR0_PDD       (0xff << 12)    /* Palette DMA request delay */
#define LCCR0_PDD_S     12
#define LCCR0_BM        (1 << 20)       /* Branch mask */
#define LCCR0_OUM       (1 << 21)       /* Output FIFO underrun mask */
#if defined(CONFIG_PXA27X)
#define LCCR0_LCDT      (1 << 22)       /* LCD Panel Type */
#define LCCR0_RDSTM     (1 << 23)       /* Read Status Interrupt Mask */
#define LCCR0_CMDIM     (1 << 24)       /* Command Interrupt Mask */
#endif

#define LCCR1_PPL       Fld (10, 0)      /* Pixels Per Line - 1 */
#define LCCR1_DisWdth(Pixel)            /* Display Width [1..800 pix.]  */ \
                        (((Pixel) - 1) << FShft (LCCR1_PPL))

#define LCCR1_HSW       Fld (6, 10)     /* Horizontal Synchronization     */
#define LCCR1_HorSnchWdth(Tpix)         /* Horizontal Synchronization     */ \
                                        /* pulse Width [1..64 Tpix]       */ \
                        (((Tpix) - 1) << FShft (LCCR1_HSW))

#define LCCR1_ELW       Fld (8, 16)     /* End-of-Line pixel clock Wait    */
                                        /* count - 1 [Tpix]                */
#define LCCR1_EndLnDel(Tpix)            /*  End-of-Line Delay              */ \
                                        /*  [1..256 Tpix]                  */ \
                        (((Tpix) - 1) << FShft (LCCR1_ELW))

#define LCCR1_BLW       Fld (8, 24)     /* Beginning-of-Line pixel clock   */
                                        /* Wait count - 1 [Tpix]           */
#define LCCR1_BegLnDel(Tpix)            /*  Beginning-of-Line Delay        */ \
                                        /*  [1..256 Tpix]                  */ \
                        (((Tpix) - 1) << FShft (LCCR1_BLW))


#define LCCR2_LPP       Fld (10, 0)     /* Line Per Panel - 1              */
#define LCCR2_DisHght(Line)             /*  Display Height [1..1024 lines] */ \
                        (((Line) - 1) << FShft (LCCR2_LPP))

#define LCCR2_VSW       Fld (6, 10)     /* Vertical Synchronization pulse  */
                                        /* Width - 1 [Tln] (L_FCLK)        */
#define LCCR2_VrtSnchWdth(Tln)          /*  Vertical Synchronization pulse */ \
                                        /*  Width [1..64 Tln]              */ \
                        (((Tln) - 1) << FShft (LCCR2_VSW))

#define LCCR2_EFW       Fld (8, 16)     /* End-of-Frame line clock Wait    */
                                        /* count [Tln]                     */
#define LCCR2_EndFrmDel(Tln)            /*  End-of-Frame Delay             */ \
                                        /*  [0..255 Tln]                   */ \
                        ((Tln) << FShft (LCCR2_EFW))

#define LCCR2_BFW       Fld (8, 24)     /* Beginning-of-Frame line clock   */
                                        /* Wait count [Tln]                */
#define LCCR2_BegFrmDel(Tln)            /*  Beginning-of-Frame Delay       */ \
                                        /*  [0..255 Tln]                   */ \
                        ((Tln) << FShft (LCCR2_BFW))

#if 0
#define LCCR3_PCD       (0xff)          /* Pixel clock divisor */
#define LCCR3_ACB       (0xff << 8)     /* AC Bias pin frequency */
#define LCCR3_ACB_S     8
#endif

#define LCCR3_API       (0xf << 16)     /* AC Bias pin trasitions per interrupt */
#define LCCR3_API_S     16
#define LCCR3_VSP       (1 << 20)       /* vertical sync polarity */
#define LCCR3_HSP       (1 << 21)       /* horizontal sync polarity */
#define LCCR3_PCP       (1 << 22)       /* pixel clock polarity */
#define LCCR3_OEP       (1 << 23)       /* output enable polarity */
#if 0
#define LCCR3_BPP       (7 << 24)       /* bits per pixel */
#define LCCR3_BPP_S     24
#endif
#define LCCR3_DPC       (1 << 27)       /* double pixel clock mode */

#define LCCR3_PDFOR_0    (0 << 30)
#define LCCR3_PDFOR_1    (1 << 30)
#define LCCR3_PDFOR_2    (2 << 30)
#define LCCR3_PDFOR_3    (3 << 30)


#define LCCR3_PCD       Fld (8, 0)      /* Pixel Clock Divisor */
#define LCCR3_PixClkDiv(Div)            /* Pixel Clock Divisor */ \
                        (((Div) << FShft (LCCR3_PCD)))


#define LCCR3_BPP       Fld (3, 24)     /* Bit Per Pixel */
#define LCCR3_Bpp(Bpp)                  /* Bit Per Pixel */ \
                        ((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26)))

#define LCCR3_ACB       Fld (8, 8)      /* AC Bias */
#define LCCR3_Acb(Acb)                  /* BAC Bias */ \
                        (((Acb) << FShft (LCCR3_ACB)))

#define LCCR3_HorSnchH  (LCCR3_HSP*0)   /*  Horizontal Synchronization     */
                                        /*  pulse active High              */
#define LCCR3_HorSnchL  (LCCR3_HSP*1)   /*  Horizontal Synchronization     */

#define LCCR3_VrtSnchH  (LCCR3_VSP*0)   /*  Vertical Synchronization pulse */
                                        /*  active High                    */
#define LCCR3_VrtSnchL  (LCCR3_VSP*1)   /*  Vertical Synchronization pulse */
                                        /*  active Low                     */

#define LCSR0_LDD       (1 << 0)        /* LCD Disable Done */
#define LCSR0_SOF       (1 << 1)        /* Start of frame */
#define LCSR0_BER       (1 << 2)        /* Bus error */
#define LCSR0_ABC       (1 << 3)        /* AC Bias count */
#define LCSR0_IUL       (1 << 4)        /* input FIFO underrun Lower panel */
#define LCSR0_IUU       (1 << 5)        /* input FIFO underrun Upper panel */
#define LCSR0_OU        (1 << 6)        /* output FIFO underrun */
#define LCSR0_QD        (1 << 7)        /* quick disable */
#define LCSR0_EOF0      (1 << 8)        /* end of frame */
#define LCSR0_BS        (1 << 9)        /* branch status */
#define LCSR0_SINT      (1 << 10)       /* subsequent interrupt */

#define LCSR1_SOF1      (1 << 0)
#define LCSR1_SOF2      (1 << 1)
#define LCSR1_SOF3      (1 << 2)
#define LCSR1_SOF4      (1 << 3)
#define LCSR1_SOF5      (1 << 4)
#define LCSR1_SOF6      (1 << 5)

#define LCSR1_EOF1      (1 << 8)
#define LCSR1_EOF2      (1 << 9)
#define LCSR1_EOF3      (1 << 10)
#define LCSR1_EOF4      (1 << 11)
#define LCSR1_EOF5      (1 << 12)
#define LCSR1_EOF6      (1 << 13)

#define LCSR1_BS1       (1 << 16)
#define LCSR1_BS2       (1 << 17)
#define LCSR1_BS3       (1 << 18)
#define LCSR1_BS4       (1 << 19)
#define LCSR1_BS5       (1 << 20)
#define LCSR1_BS6       (1 << 21)

#define LCSR1_IU2       (1 << 25)
#define LCSR1_IU3       (1 << 26)
#define LCSR1_IU4       (1 << 27)
#define LCSR1_IU5       (1 << 28)
#define LCSR1_IU6       (1 << 29)

#define LDCMD_PAL       (1 << 26)       /* instructs DMA to load palette buffer */
#if defined(CONFIG_PXA27X)
#define LDCMD_SOFINT    (1 << 22)
#define LDCMD_EOFINT    (1 << 21)
#endif

/*
 * Memory controller
 */

#ifdef CONFIG_CPU_MONAHANS
/* Static Memory Controller Registers */
#define MSC0            __REG_2(0x4A000008)  /* Static Memory Control Register 0 */
#define MSC1            __REG_2(0x4A00000C)  /* Static Memory Control Register 1 */
#define MECR            __REG_2(0x4A000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
#define SXCNFG          __REG_2(0x4A00001C)  /* Synchronous Static Memory Control Register */
#define MCMEM0          __REG_2(0x4A000028)  /* Card interface Common Memory Space Socket 0 Timing */
#define MCATT0          __REG_2(0x4A000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
#define MCIO0           __REG_2(0x4A000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
#define MEMCLKCFG       __REG_2(0x4A000068)  /* SCLK speed configuration */
#define CSADRCFG0       __REG_2(0x4A000080)  /* Address Configuration for chip select 0 */
#define CSADRCFG1       __REG_2(0x4A000084)  /* Address Configuration for chip select 1 */
#define CSADRCFG2       __REG_2(0x4A000088)  /* Address Configuration for chip select 2 */
#define CSADRCFG3       __REG_2(0x4A00008C)  /* Address Configuration for chip select 3 */
#define CSADRCFG_P      __REG_2(0x4A000090)  /* Address Configuration for pcmcia card interface */
#define CSMSADRCFG      __REG_2(0x4A0000A0)  /* Master Address Configuration Register */
#define CLK_RET_DEL     __REG_2(0x4A0000B0)  /* Delay line and mux selects for return data latching for sync. flash */
#define ADV_RET_DEL     __REG_2(0x4A0000B4)  /* Delay line and mux selects for return data latching for sync. flash */

/* Dynamic Memory Controller Registers */
#define MDCNFG          __REG_2(0x48100000)  /* SDRAM Configuration Register 0 */
#define MDREFR          __REG_2(0x48100004)  /* SDRAM Refresh Control Register */
#define FLYCNFG         __REG_2(0x48100020)  /* Fly-by DMA DVAL[1:0] polarities */
#define MDMRS           __REG_2(0x48100040)  /* MRS value to be written to SDRAM */
#define DDR_SCAL        __REG_2(0x48100050)  /* Software Delay Line Calibration/Configuration for external DDR memory. */
#define DDR_HCAL        __REG_2(0x48100060)  /* Hardware Delay Line Calibration/Configuration for external DDR memory. */
#define DDR_WCAL        __REG_2(0x48100068)  /* DDR Write Strobe Calibration Register */
#define DMCIER          __REG_2(0x48100070)  /* Dynamic MC Interrupt Enable Register. */
#define DMCISR          __REG_2(0x48100078)  /* Dynamic MC Interrupt Status Register. */
#define DDR_DLS         __REG_2(0x48100080)  /* DDR Delay Line Value Status register for external DDR memory. */
#define EMPI            __REG_2(0x48100090)  /* EMPI Control Register */
#define RCOMP           __REG_2(0x48100100)
#define PAD_MA          __REG_2(0x48100110)
#define PAD_MDMSB       __REG_2(0x48100114)
#define PAD_MDLSB       __REG_2(0x48100118)
#define PAD_DMEM        __REG_2(0x4810011c)
#define PAD_SDCLK       __REG_2(0x48100120)
#define PAD_SDCS        __REG_2(0x48100124)
#define PAD_SMEM        __REG_2(0x48100128)
#define PAD_SCLK        __REG_2(0x4810012C)
#define TAI             __REG_2(0x48100F00) /* TAI Tavor Address Isolation Register */

/* Some frequently used bits */
#define MDCNFG_DMAP     0x80000000      /* SDRAM 1GB Memory Map Enable */
#define MDCNFG_DMCEN    0x40000000      /* Enable Dynamic Memory Controller */
#define MDCNFG_HWFREQ   0x20000000      /* Hardware Frequency Change Calibration */
#define MDCNFG_DTYPE    0x400           /* SDRAM Type: 1=DDR SDRAM */

#define MDCNFG_DTC_0    0x0             /* Timing Category of SDRAM */
#define MDCNFG_DTC_1    0x100
#define MDCNFG_DTC_2    0x200
#define MDCNFG_DTC_3    0x300

#define MDCNFG_DRAC_12  0x0             /* Number of Row Access Bits */
#define MDCNFG_DRAC_13  0x20
#define MDCNFG_DRAC_14  0x40

#define MDCNFG_DCAC_9   0x0             /* Number of Column Acess Bits */
#define MDCNFG_DCAC_10  0x08
#define MDCNFG_DCAC_11  0x10

#define MDCNFG_DBW_16   0x4             /* SDRAM Data Bus width 16bit */
#define MDCNFG_DCSE1    0x2             /* SDRAM CS 1 Enable */
#define MDCNFG_DCSE0    0x1             /* SDRAM CS 0 Enable */


/* Data Flash Controller Registers */

#define NDCR            __REG(0x43100000)  /* Data Flash Control register */
#define NDTR0CS0        __REG(0x43100004)  /* Data Controller Timing Parameter 0 Register for ND_nCS0 */
/* #define NDTR0CS1     __REG(0x43100008)  /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */
#define NDTR1CS0        __REG(0x4310000C)  /* Data Controller Timing Parameter 1 Register for ND_nCS0 */
/* #define NDTR1CS1     __REG(0x43100010)  /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */
#define NDSR            __REG(0x43100014)  /* Data Controller Status Register */
#define NDPCR           __REG(0x43100018)  /* Data Controller Page Count Register */
#define NDBDR0          __REG(0x4310001C)  /* Data Controller Bad Block Register 0 */
#define NDBDR1          __REG(0x43100020)  /* Data Controller Bad Block Register 1 */
#define NDDB            __REG(0x43100040)  /* Data Controller Data Buffer */
#define NDCB0           __REG(0x43100048)  /* Data Controller Command Buffer0 */
#define NDCB1           __REG(0x4310004C)  /* Data Controller Command Buffer1 */
#define NDCB2           __REG(0x43100050)  /* Data Controller Command Buffer2 */

#define NDCR_SPARE_EN   (0x1<<31)
#define NDCR_ECC_EN     (0x1<<30)
#define NDCR_DMA_EN     (0x1<<29)
#define NDCR_ND_RUN     (0x1<<28)
#define NDCR_DWIDTH_C   (0x1<<27)
#define NDCR_DWIDTH_M   (0x1<<26)
#define NDCR_PAGE_SZ    (0x3<<24)
#define NDCR_NCSX       (0x1<<23)
#define NDCR_ND_STOP    (0x1<<22)
/* reserved:
 * #define NDCR_ND_MODE (0x3<<21)
 * #define NDCR_NAND_MODE   0x0 */
#define NDCR_CLR_PG_CNT (0x1<<20)
#define NDCR_CLR_ECC    (0x1<<19)
#define NDCR_RD_ID_CNT  (0x7<<16)
#define NDCR_RA_START   (0x1<<15)
#define NDCR_PG_PER_BLK (0x1<<14)
#define NDCR_ND_ARB_EN  (0x1<<12)
#define NDCR_RDYM       (0x1<<11)
#define NDCR_CS0_PAGEDM (0x1<<10)
#define NDCR_CS1_PAGEDM (0x1<<9)
#define NDCR_CS0_CMDDM  (0x1<<8)
#define NDCR_CS1_CMDDM  (0x1<<7)
#define NDCR_CS0_BBDM   (0x1<<6)
#define NDCR_CS1_BBDM   (0x1<<5)
#define NDCR_DBERRM     (0x1<<4)
#define NDCR_SBERRM     (0x1<<3)
#define NDCR_WRDREQM    (0x1<<2)
#define NDCR_RDDREQM    (0x1<<1)
#define NDCR_WRCMDREQM  (0x1)

#define NDSR_RDY        (0x1<<11)
#define NDSR_CS0_PAGED  (0x1<<10)
#define NDSR_CS1_PAGED  (0x1<<9)
#define NDSR_CS0_CMDD   (0x1<<8)
#define NDSR_CS1_CMDD   (0x1<<7)
#define NDSR_CS0_BBD    (0x1<<6)
#define NDSR_CS1_BBD    (0x1<<5)
#define NDSR_DBERR      (0x1<<4)
#define NDSR_SBERR      (0x1<<3)
#define NDSR_WRDREQ     (0x1<<2)
#define NDSR_RDDREQ     (0x1<<1)
#define NDSR_WRCMDREQ   (0x1)

#define NDCB0_AUTO_RS   (0x1<<25)
#define NDCB0_CSEL      (0x1<<24)
#define NDCB0_CMD_TYPE  (0x7<<21)
#define NDCB0_NC        (0x1<<20)
#define NDCB0_DBC       (0x1<<19)
#define NDCB0_ADDR_CYC  (0x7<<16)
#define NDCB0_CMD2      (0xff<<8)
#define NDCB0_CMD1      (0xff)
#define MCMEM(s) MCMEM0
#define MCATT(s) MCATT0
#define MCIO(s) MCIO0
#define MECR_CIT        (1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */

/* Maximum values for NAND Interface Timing Registers in DFC clock
 * periods */
#define DFC_MAX_tCH     7
#define DFC_MAX_tCS     7
#define DFC_MAX_tWH     7
#define DFC_MAX_tWP     7
#define DFC_MAX_tRH     7
#define DFC_MAX_tRP     15
#define DFC_MAX_tR      65535
#define DFC_MAX_tWHR    15
#define DFC_MAX_tAR     15

#define DFC_CLOCK       104             /* DFC Clock is 104 MHz */
#define DFC_CLK_PER_US  DFC_CLOCK/1000  /* clock period in ns */

#else /* CONFIG_CPU_MONAHANS */

#define MEMC_BASE       __REG(0x48000000)  /* Base of Memory Controller */
#define MDCNFG_OFFSET   0x0
#define MDREFR_OFFSET   0x4
#define MSC0_OFFSET     0x8
#define MSC1_OFFSET     0xC
#define MSC2_OFFSET     0x10
#define MECR_OFFSET     0x14
#define SXLCR_OFFSET    0x18
#define SXCNFG_OFFSET   0x1C
#define FLYCNFG_OFFSET  0x20
#define SXMRS_OFFSET    0x24
#define MCMEM0_OFFSET   0x28
#define MCMEM1_OFFSET   0x2C
#define MCATT0_OFFSET   0x30
#define MCATT1_OFFSET   0x34
#define MCIO0_OFFSET    0x38
#define MCIO1_OFFSET    0x3C
#define MDMRS_OFFSET    0x40

#define MDCNFG          __REG(0x48000000)  /* SDRAM Configuration Register 0 */
#define MDCNFG_DE0      0x00000001
#define MDCNFG_DE1      0x00000002
#define MDCNFG_DE2      0x00010000
#define MDCNFG_DE3      0x00020000
#define MDCNFG_DWID0    0x00000004

#define MDREFR          __REG(0x48000004)  /* SDRAM Refresh Control Register */
#define MSC0            __REG(0x48000008)  /* Static Memory Control Register 0 */
#define MSC1            __REG(0x4800000C)  /* Static Memory Control Register 1 */
#define MSC2            __REG(0x48000010)  /* Static Memory Control Register 2 */
#define MECR            __REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
#define SXLCR           __REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
#define SXCNFG          __REG(0x4800001C)  /* Synchronous Static Memory Control Register */
#define SXMRS           __REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
#define MCMEM0          __REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
#define MCMEM1          __REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
#define MCATT0          __REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
#define MCATT1          __REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
#define MCIO0           __REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
#define MCIO1           __REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
#define MDMRS           __REG(0x48000040)  /* MRS value to be written to SDRAM */
#define BOOT_DEF        __REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */

#define MDREFR_K2FREE   (1 << 25)       /* SDRAM Free-Running Control */
#define MDREFR_K1FREE   (1 << 24)       /* SDRAM Free-Running Control */
#define MDREFR_K0FREE   (1 << 23)       /* SDRAM Free-Running Control */
#define MDREFR_SLFRSH   (1 << 22)       /* SDRAM Self-Refresh Control/Status */
#define MDREFR_APD      (1 << 20)       /* SDRAM/SSRAM Auto-Power-Down Enable */
#define MDREFR_K2DB2    (1 << 19)       /* SDCLK2 Divide by 2 Control/Status */
#define MDREFR_K2RUN    (1 << 18)       /* SDCLK2 Run Control/Status */
#define MDREFR_K1DB2    (1 << 17)       /* SDCLK1 Divide by 2 Control/Status */
#define MDREFR_K1RUN    (1 << 16)       /* SDCLK1 Run Control/Status */
#define MDREFR_E1PIN    (1 << 15)       /* SDCKE1 Level Control/Status */
#define MDREFR_K0DB2    (1 << 14)       /* SDCLK0 Divide by 2 Control/Status */
#define MDREFR_K0RUN    (1 << 13)       /* SDCLK0 Run Control/Status */
#define MDREFR_E0PIN    (1 << 12)       /* SDCKE0 Level Control/Status */

#if defined(CONFIG_PXA27X)

#define ARB_CNTRL       __REG(0x48000048)  /* Arbiter Control Register */

#define ARB_DMA_SLV_PARK        (1<<31)    /* Be parked with DMA slave when idle */
#define ARB_CI_PARK             (1<<30)    /* Be parked with Camera Interface when idle */
#define ARB_EX_MEM_PARK         (1<<29)    /* Be parked with external MEMC when idle */
#define ARB_INT_MEM_PARK        (1<<28)    /* Be parked with internal MEMC when idle */
#define ARB_USB_PARK            (1<<27)    /* Be parked with USB when idle */
#define ARB_LCD_PARK            (1<<26)    /* Be parked with LCD when idle */
#define ARB_DMA_PARK            (1<<25)    /* Be parked with DMA when idle */
#define ARB_CORE_PARK           (1<<24)    /* Be parked with core when idle */
#define ARB_LOCK_FLAG           (1<<23)    /* Only Locking masters gain access to the bus */

#endif /* CONFIG_CPU_MONAHANS */

/* Interrupt Controller */

#define ICIP2           __REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2           __REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
#define ICLR2           __REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
#define ICFP2           __REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2           __REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */

/* General Purpose I/O */

#define GAFR3_L         __REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
#define GAFR3_U         __REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
#define GPLR3           __REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
#define GPDR3           __REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
#define GPSR3           __REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
#define GPCR3           __REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO <127:96> */
#define GRER3           __REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
#define GFER3           __REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
#define GEDR3           __REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */

/* Core Clock */

#define CCSR            __REG(0x4130000C) /* Core Clock Status Register */

#define CKEN23_SSP1     (1 << 23) /* SSP1 Unit Clock Enable */
#define CKEN22_MEMC     (1 << 22) /* Memory Controler */
#define CKEN21_MSHC     (1 << 21) /* Memery Stick Host Controller */
#define CKEN20_IM       (1 << 20) /* Internal Memory Clock Enable */
#define CKEN19_KEYPAD   (1 << 19) /* Keypad Interface Clock Enable */
#define CKEN18_USIM     (1 << 18) /* USIM Unit Clock Enable */
#define CKEN17_MSL      (1 << 17) /* MSL Interface Unit Clock Enable */
#define CKEN15_PWR_I2C  (1 << 15) /* PWR_I2C Unit Clock Enable */
#define CKEN9_OST       (1 << 9)  /* OS Timer Unit Clock Enable */
#define CKEN4_SSP3      (1 << 4)  /* SSP3 Unit Clock Enable */

/* Memory controller */

#define MDREFR_K0DB4    (1 << 29)         /* SDCLK[0] divide by 4 */

/* LCD registers */
#define LCCR4           __REG(0x44000010)  /* LCD Controller Control Register 4 */
#define LCCR5           __REG(0x44000014)  /* LCD Controller Control Register 5 */
#define FBR0            __REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
#define FBR1            __REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
#define FBR2            __REG(0x44000028)  /* DMA Channel 2 Frame Branch Register */
#define FBR3            __REG(0x4400002C)  /* DMA Channel 3 Frame Branch Register */
#define FBR4            __REG(0x44000030)  /* DMA Channel 4 Frame Branch Register */
#define FDADR2          __REG(0x44000220)  /* DMA Channel 2 Frame Descriptor Address Register */
#define FSADR2          __REG(0x44000224)  /* DMA Channel 2 Frame Source Address Register */
#define FIDR2           __REG(0x44000228)  /* DMA Channel 2 Frame ID Register */
#define LDCMD2          __REG(0x4400022C)  /* DMA Channel 2 Command Register */
#define FDADR3          __REG(0x44000230)  /* DMA Channel 3 Frame Descriptor Address Register */
#define FSADR3          __REG(0x44000234)  /* DMA Channel 3 Frame Source Address Register */
#define FIDR3           __REG(0x44000238)  /* DMA Channel 3 Frame ID Register */
#define LDCMD3          __REG(0x4400023C)  /* DMA Channel 3 Command Register */
#define FDADR4          __REG(0x44000240)  /* DMA Channel 4 Frame Descriptor Address Register */
#define FSADR4          __REG(0x44000244)  /* DMA Channel 4 Frame Source Address Register */
#define FIDR4           __REG(0x44000248)  /* DMA Channel 4 Frame ID Register */
#define LDCMD4          __REG(0x4400024C)  /* DMA Channel 4 Command Register */
#define FDADR5          __REG(0x44000250)  /* DMA Channel 5 Frame Descriptor Address Register */
#define FSADR5          __REG(0x44000254)  /* DMA Channel 5 Frame Source Address Register */
#define FIDR5           __REG(0x44000258)  /* DMA Channel 5 Frame ID Register */
#define LDCMD5          __REG(0x4400025C)  /* DMA Channel 5 Command Register */

#define OVL1C1          __REG(0x44000050)  /* Overlay 1 Control Register 1 */
#define OVL1C2          __REG(0x44000060)  /* Overlay 1 Control Register 2 */
#define OVL2C1          __REG(0x44000070)  /* Overlay 2 Control Register 1 */
#define OVL2C2          __REG(0x44000080)  /* Overlay 2 Control Register 2 */
#define CCR             __REG(0x44000090)  /* Cursor Control Register */

#define FBR5            __REG(0x44000110)  /* DMA Channel 5 Frame Branch Register */
#define FBR6            __REG(0x44000114)  /* DMA Channel 6 Frame Branch Register */

#define LCCR0_LDDALT    (1<<26)         /* LDD Alternate mapping bit when base pixel is RGBT16 */
#define LCCR0_OUC       (1<<25)         /* Overlay Underlay Control Bit */

#define LCCR5_SOFM1     (1<<0)          /* Start Of Frame Mask for Overlay 1 (channel 1) */
#define LCCR5_SOFM2     (1<<1)          /* Start Of Frame Mask for Overlay 2 (channel 2) */
#define LCCR5_SOFM3     (1<<2)          /* Start Of Frame Mask for Overlay 2 (channel 3) */
#define LCCR5_SOFM4     (1<<3)          /* Start Of Frame Mask for Overlay 2 (channel 4) */
#define LCCR5_SOFM5     (1<<4)          /* Start Of Frame Mask for cursor (channel 5) */
#define LCCR5_SOFM6     (1<<5)          /* Start Of Frame Mask for command data (channel 6) */

#define LCCR5_EOFM1     (1<<8)          /* End Of Frame Mask for Overlay 1 (channel 1) */
#define LCCR5_EOFM2     (1<<9)          /* End Of Frame Mask for Overlay 2 (channel 2) */
#define LCCR5_EOFM3     (1<<10)         /* End Of Frame Mask for Overlay 2 (channel 3) */
#define LCCR5_EOFM4     (1<<11)         /* End Of Frame Mask for Overlay 2 (channel 4) */
#define LCCR5_EOFM5     (1<<12)         /* End Of Frame Mask for cursor (channel 5) */
#define LCCR5_EOFM6     (1<<13)         /* End Of Frame Mask for command data (channel 6) */

#define LCCR5_BSM1      (1<<16)         /* Branch mask for Overlay 1 (channel 1) */
#define LCCR5_BSM2      (1<<17)         /* Branch mask for Overlay 2 (channel 2) */
#define LCCR5_BSM3      (1<<18)         /* Branch mask for Overlay 2 (channel 3) */
#define LCCR5_BSM4      (1<<19)         /* Branch mask for Overlay 2 (channel 4) */
#define LCCR5_BSM5      (1<<20)         /* Branch mask for cursor (channel 5) */
#define LCCR5_BSM6      (1<<21)         /* Branch mask for data command  (channel 6) */

#define LCCR5_IUM1      (1<<24)         /* Input FIFO Underrun Mask for Overlay 1  */
#define LCCR5_IUM2      (1<<25)         /* Input FIFO Underrun Mask for Overlay 2  */
#define LCCR5_IUM3      (1<<26)         /* Input FIFO Underrun Mask for Overlay 2  */
#define LCCR5_IUM4      (1<<27)         /* Input FIFO Underrun Mask for Overlay 2  */
#define LCCR5_IUM5      (1<<28)         /* Input FIFO Underrun Mask for cursor */
#define LCCR5_IUM6      (1<<29)         /* Input FIFO Underrun Mask for data command */

#define OVL1C1_O1EN     (1<<31)         /* Enable bit for Overlay 1 */
#define OVL2C1_O2EN     (1<<31)         /* Enable bit for Overlay 2 */
#define CCR_CEN         (1<<31)         /* Enable bit for Cursor */

/* Keypad controller */

#define KPC             __REG(0x41500000) /* Keypad Interface Control register */
#define KPDK            __REG(0x41500008) /* Keypad Interface Direct Key register */
#define KPREC           __REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */
#define KPMK            __REG(0x41500018) /* Keypad Intefcace Matrix Key register */
#define KPAS            __REG(0x41500020) /* Keypad Interface Automatic Scan register */
#define KPASMKP0        __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
#define KPASMKP1        __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
#define KPASMKP2        __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
#define KPASMKP3        __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
#define KPKDI           __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */

#define KPC_AS          (0x1 << 30)  /* Automatic Scan bit */
#define KPC_ASACT       (0x1 << 29)  /* Automatic Scan on Activity */
#define KPC_MI          (0x1 << 22)  /* Matrix interrupt bit */
#define KPC_IMKP        (0x1 << 21)  /* Ignore Multiple Key Press */
#define KPC_MS7         (0x1 << 20)  /* Matrix scan line 7 */
#define KPC_MS6         (0x1 << 19)  /* Matrix scan line 6 */
#define KPC_MS5         (0x1 << 18)  /* Matrix scan line 5 */
#define KPC_MS4         (0x1 << 17)  /* Matrix scan line 4 */
#define KPC_MS3         (0x1 << 16)  /* Matrix scan line 3 */
#define KPC_MS2         (0x1 << 15)  /* Matrix scan line 2 */
#define KPC_MS1         (0x1 << 14)  /* Matrix scan line 1 */
#define KPC_MS0         (0x1 << 13)  /* Matrix scan line 0 */
#define KPC_ME          (0x1 << 12)  /* Matrix Keypad Enable */
#define KPC_MIE         (0x1 << 11)  /* Matrix Interrupt Enable */
#define KPC_DK_DEB_SEL  (0x1 <<  9)  /* Direct Key Debounce select */
#define KPC_DI          (0x1 <<  5)  /* Direct key interrupt bit */
#define KPC_DEE0        (0x1 <<  2)  /* Rotary Encoder 0 Enable */
#define KPC_DE          (0x1 <<  1)  /* Direct Keypad Enable */
#define KPC_DIE         (0x1 <<  0)  /* Direct Keypad interrupt Enable */

#define KPDK_DKP        (0x1 << 31)
#define KPDK_DK7        (0x1 <<  7)
#define KPDK_DK6        (0x1 <<  6)
#define KPDK_DK5        (0x1 <<  5)
#define KPDK_DK4        (0x1 <<  4)
#define KPDK_DK3        (0x1 <<  3)
#define KPDK_DK2        (0x1 <<  2)
#define KPDK_DK1        (0x1 <<  1)
#define KPDK_DK0        (0x1 <<  0)

#define KPREC_OF1       (0x1 << 31)
#define kPREC_UF1       (0x1 << 30)
#define KPREC_OF0       (0x1 << 15)
#define KPREC_UF0       (0x1 << 14)

#define KPMK_MKP        (0x1 << 31)
#define KPAS_SO         (0x1 << 31)
#define KPASMKPx_SO     (0x1 << 31)

#define GPIO113_BIT     (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
#define PSLR            __REG(0x40F00034)
#define PSTR            __REG(0x40F00038)  /* Power Manager Standby Configuration Reg */
#define PSNR            __REG(0x40F0003C)  /* Power Manager Sense Configuration Reg */
#define PVCR            __REG(0x40F00040)  /* Power Manager Voltage Change Control Reg */
#define PKWR            __REG(0x40F00050)  /* Power Manager KB Wake-Up Enable Reg */
#define PKSR            __REG(0x40F00054)  /* Power Manager KB Level-Detect Status Reg */
#define OSMR4           __REG(0x40A00080)  /* */
#define OSCR4           __REG(0x40A00040)  /* OS Timer Counter Register */
#define OMCR4           __REG(0x40A000C0)  /* */

#endif  /* CONFIG_PXA27X */

#endif  /* _PXA_REGS_H_ */