]> git.ipfire.org Git - people/ms/u-boot.git/blob - arch/arm/mach-imx/timer.c
imx: hab: Check if CSF contains deprecated commands
[people/ms/u-boot.git] / arch / arm / mach-imx / timer.c
1 /*
2 * (C) Copyright 2007
3 * Sascha Hauer, Pengutronix
4 *
5 * (C) Copyright 2009 Freescale Semiconductor, Inc.
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10 #include <common.h>
11 #include <asm/io.h>
12 #include <div64.h>
13 #include <asm/arch/imx-regs.h>
14 #include <asm/arch/clock.h>
15 #include <asm/arch/sys_proto.h>
16
17 /* General purpose timers registers */
18 struct mxc_gpt {
19 unsigned int control;
20 unsigned int prescaler;
21 unsigned int status;
22 unsigned int nouse[6];
23 unsigned int counter;
24 };
25
26 static struct mxc_gpt *cur_gpt = (struct mxc_gpt *)GPT1_BASE_ADDR;
27
28 /* General purpose timers bitfields */
29 #define GPTCR_SWR (1 << 15) /* Software reset */
30 #define GPTCR_24MEN (1 << 10) /* Enable 24MHz clock input */
31 #define GPTCR_FRR (1 << 9) /* Freerun / restart */
32 #define GPTCR_CLKSOURCE_32 (4 << 6) /* Clock source 32khz */
33 #define GPTCR_CLKSOURCE_OSC (5 << 6) /* Clock source OSC */
34 #define GPTCR_CLKSOURCE_PRE (1 << 6) /* Clock source PRECLK */
35 #define GPTCR_CLKSOURCE_MASK (0x7 << 6)
36 #define GPTCR_TEN 1 /* Timer enable */
37
38 #define GPTPR_PRESCALER24M_SHIFT 12
39 #define GPTPR_PRESCALER24M_MASK (0xF << GPTPR_PRESCALER24M_SHIFT)
40
41 DECLARE_GLOBAL_DATA_PTR;
42
43 static inline int gpt_has_clk_source_osc(void)
44 {
45 #if defined(CONFIG_MX6)
46 if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) ||
47 is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul() ||
48 is_mx6ull() || is_mx6sll())
49 return 1;
50
51 return 0;
52 #else
53 return 0;
54 #endif
55 }
56
57 static inline ulong gpt_get_clk(void)
58 {
59 #ifdef CONFIG_MXC_GPT_HCLK
60 if (gpt_has_clk_source_osc())
61 return MXC_HCLK >> 3;
62 else
63 return mxc_get_clock(MXC_IPG_PERCLK);
64 #else
65 return MXC_CLK32;
66 #endif
67 }
68
69 int timer_init(void)
70 {
71 int i;
72
73 /* setup GP Timer 1 */
74 __raw_writel(GPTCR_SWR, &cur_gpt->control);
75
76 /* We have no udelay by now */
77 __raw_writel(0, &cur_gpt->control);
78
79 i = __raw_readl(&cur_gpt->control);
80 i &= ~GPTCR_CLKSOURCE_MASK;
81
82 #ifdef CONFIG_MXC_GPT_HCLK
83 if (gpt_has_clk_source_osc()) {
84 i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
85
86 /*
87 * For DL/S, SX, UL, ULL, SLL set 24Mhz OSC
88 * Enable bit and prescaler
89 */
90 if (is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull() ||
91 is_mx6sll()) {
92 i |= GPTCR_24MEN;
93
94 /* Produce 3Mhz clock */
95 __raw_writel((7 << GPTPR_PRESCALER24M_SHIFT),
96 &cur_gpt->prescaler);
97 }
98 } else {
99 i |= GPTCR_CLKSOURCE_PRE | GPTCR_TEN;
100 }
101 #else
102 __raw_writel(0, &cur_gpt->prescaler); /* 32Khz */
103 i |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
104 #endif
105 __raw_writel(i, &cur_gpt->control);
106
107 return 0;
108 }
109
110 unsigned long timer_read_counter(void)
111 {
112 return __raw_readl(&cur_gpt->counter); /* current tick value */
113 }
114
115 /*
116 * This function is derived from PowerPC code (timebase clock frequency).
117 * On ARM it returns the number of timer ticks per second.
118 */
119 ulong get_tbclk(void)
120 {
121 return gpt_get_clk();
122 }
123
124 /*
125 * This function is intended for SHORT delays only.
126 * It will overflow at around 10 seconds @ 400MHz,
127 * or 20 seconds @ 200MHz.
128 */
129 unsigned long usec2ticks(unsigned long _usec)
130 {
131 unsigned long long usec = _usec;
132
133 usec *= get_tbclk();
134 usec += 999999;
135 do_div(usec, 1000000);
136
137 return usec;
138 }