arch/arm/mach-mvebu/include/mach/config.h

   1 /*
   2  * (C) Copyright 2011
   3  * Marvell Semiconductor <www.marvell.com>
   4  * Written-by: Lei Wen <leiwen@marvell.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 /*
  10  * This file should be included in board config header file.
  11  *
  12  * It supports common definitions for MVEBU platforms
  13  */
  14
  15 #ifndef _MVEBU_CONFIG_H
  16 #define _MVEBU_CONFIG_H
  17
  18 #include <asm/arch/soc.h>
  19
  20 #if defined(CONFIG_ARMADA_XP)
  21 #define MV88F78X60 /* for the DDR training bin_hdr code */
  22 #endif
  23
  24 #define CONFIG_SYS_CACHELINE_SIZE       32
  25
  26 /*
  27  * By default kwbimage.cfg from board specific folder is used
  28  * If for some board, different configuration file need to be used,
  29  * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
  30  */
  31 #ifndef CONFIG_SYS_KWD_CONFIG
  32 #define CONFIG_SYS_KWD_CONFIG   $(CONFIG_BOARDDIR)/kwbimage.cfg
  33 #endif /* CONFIG_SYS_KWD_CONFIG */
  34
  35 /* Add target to build it automatically upon "make" */
  36 #ifdef CONFIG_SPL
  37 #define CONFIG_BUILD_TARGET     "u-boot-spl.kwb"
  38 #endif
  39
  40 /* end of 16M scrubbed by training in bootrom */
  41 #define CONFIG_SYS_INIT_SP_ADDR         0x00FF0000
  42 #define CONFIG_NR_DRAM_BANKS_MAX        2
  43
  44 #define MV_UART_CONSOLE_BASE            MVEBU_UART0_BASE
  45
  46 /*
  47  * SPI Flash configuration
  48  */
  49 #ifdef CONFIG_CMD_SF
  50 #define CONFIG_HARD_SPI                 1
  51 #define CONFIG_KIRKWOOD_SPI             1
  52 #ifndef CONFIG_ENV_SPI_BUS
  53 # define CONFIG_ENV_SPI_BUS             0
  54 #endif
  55 #ifndef CONFIG_ENV_SPI_CS
  56 # define CONFIG_ENV_SPI_CS              0
  57 #endif
  58 #ifndef CONFIG_ENV_SPI_MAX_HZ
  59 # define CONFIG_ENV_SPI_MAX_HZ          50000000
  60 #endif
  61 #endif
  62
  63 /*
  64  * Ethernet Driver configuration
  65  */
  66 #ifdef CONFIG_CMD_NET
  67 #define CONFIG_CMD_MII
  68 #define CONFIG_MII              /* expose smi ove miiphy interface */
  69 #define CONFIG_MVNETA           /* Enable Marvell Gbe Controller Driver */
  70 #define CONFIG_PHYLIB
  71 #define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
  72 #define CONFIG_PHY_GIGE         /* GbE speed/duplex detect */
  73 #define CONFIG_ARP_TIMEOUT      200
  74 #define CONFIG_NET_RETRY_COUNT  50
  75 #endif /* CONFIG_CMD_NET */
  76
  77 /*
  78  * I2C related stuff
  79  */
  80 #ifdef CONFIG_CMD_I2C
  81 #ifndef CONFIG_SYS_I2C_SOFT
  82 #define CONFIG_I2C_MVTWSI
  83 #endif
  84 #define CONFIG_SYS_I2C_SLAVE            0x0
  85 #define CONFIG_SYS_I2C_SPEED            100000
  86 #endif
  87
  88 /* Common SPL configuration */
  89 #ifndef CONFIG_SPL_LDSCRIPT
  90 #define CONFIG_SPL_LDSCRIPT             "arch/arm/mach-mvebu/u-boot-spl.lds"
  91 #endif
  92
  93 #endif /* __MVEBU_CONFIG_H */