arch/arm/mach-omap2/am33xx/Kconfig

   1 if AM33XX
   2
   3 choice
   4         prompt "AM33xx board select"
   5         optional
   6
   7 config TARGET_AM335X_EVM
   8         bool "Support am335x_evm"
   9         select DM
  10         select DM_SERIAL
  11         select DM_GPIO
  12         select TI_I2C_BOARD_DETECT
  13         help
  14           This option specifies support for the AM335x
  15           GP and HS EVM development platforms. The AM335x
  16           GP EVM is a standalone test, development, and
  17           evaluation module system that enables developers
  18           to write software and develop hardware around
  19           an AM335x processor subsystem.
  20
  21 config TARGET_AM335X_BALTOS
  22         bool "Support am335x_baltos"
  23         select DM
  24         select DM_SERIAL
  25         select DM_GPIO
  26
  27 config TARGET_AM335X_IGEP0033
  28         bool "Support am335x_igep0033"
  29         select DM
  30         select DM_SERIAL
  31         select DM_GPIO
  32
  33 config TARGET_AM335X_SHC
  34         bool "Support am335x based shc board from bosch"
  35         select DM
  36         select DM_SERIAL
  37         select DM_GPIO
  38
  39 config TARGET_AM335X_SL50
  40         bool "Support am335x_sl50"
  41         select DM
  42         select DM_SERIAL
  43         select DM_GPIO
  44
  45 config TARGET_BAV335X
  46         bool "Support bav335x"
  47         select DM
  48         select DM_SERIAL
  49         help
  50           The BAV335x OEM Network Processor integrates all the functions of an
  51           embedded network computer in a small, easy to use SODIMM module which
  52           incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8
  53           processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit
  54           ethernet with simple connection to external connectors.
  55
  56           For more information, visit: http://birdland.com/oem
  57
  58 config TARGET_CM_T335
  59         bool "Support cm_t335"
  60         select DM
  61         select DM_SERIAL
  62         select DM_GPIO
  63
  64 config TARGET_PCM051
  65         bool "Support pcm051"
  66         select DM
  67         select DM_SERIAL
  68         select DM_GPIO
  69
  70 config TARGET_PENGWYN
  71         bool "Support pengwyn"
  72         select DM
  73         select DM_SERIAL
  74         select DM_GPIO
  75
  76 config TARGET_PEPPER
  77         bool "Support pepper"
  78         select DM
  79         select DM_SERIAL
  80         select DM_GPIO
  81
  82 endchoice
  83
  84 endif
  85
  86 if AM43XX
  87
  88 config SPL_EXT_SUPPORT
  89         default y
  90
  91 config SPL_GPIO_SUPPORT
  92         default y
  93
  94 config SPL_I2C_SUPPORT
  95         default y
  96
  97 config TARGET_AM43XX_EVM
  98         bool "Support am43xx_evm"
  99         select TI_I2C_BOARD_DETECT
 100         help
 101           This option specifies support for the AM43xx
 102           GP and HS EVM development platforms.The AM437x
 103           GP EVM is a standalone test, development, and
 104           evaluation module system that enables developers
 105           to write software and develop hardware around
 106           an AM43xx processor subsystem.
 107 endif
 108
 109 if AM43XX || AM33XX
 110 config ISW_ENTRY_ADDR
 111         hex "Address in memory or XIP flash of bootloader entry point"
 112         help
 113           After any reset, the boot ROM on the AM43XX SOC
 114           searches the boot media for a valid boot image.
 115           For non-XIP devices, the ROM then copies the
 116           image into internal memory.
 117           For all boot modes, after the ROM processes the
 118           boot image it eventually computes the entry
 119           point address depending on the device type
 120           (secure/non-secure), boot media (xip/non-xip) and
 121           image headers.
 122         default 0x402F4000 if AM43XX
 123         default 0x402F0400 if AM33XX
 124
 125 config PUB_ROM_DATA_SIZE
 126         hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
 127         help
 128           During the device boot, the public ROM uses the top of
 129           the public L3 OCMC RAM to store r/w data like stack,
 130           heap, globals etc. When the ROM is copying the boot
 131           image from the boot media into memory, the image must
 132           not spill over into this area. This value can be used
 133           during compile time to determine the maximum size of a
 134           boot image. Once the ROM transfers control to the boot
 135           image, this area is no longer used, and can be reclaimed
 136           for run time use by the boot image.
 137         default 0x8400
 138 endif