arch/arm/mach-omap2/am33xx/Kconfig

   1 if TI816X
   2
   3 config TARGET_TI816X_EVM
   4         bool "Support ti816x_evm"
   5         help
   6           This option specifies support for the TI8168 EVM development platform
   7           with PG2.0 silicon and DDR3 DRAM.
   8
   9 endif
  10
  11 if TI814X
  12
  13 config TARGET_TI814X_EVM
  14         bool "Support ti814x_evm"
  15         help
  16           This option specifies support for the TI8148
  17           EVM development platform.
  18
  19 endif
  20
  21 if AM33XX
  22
  23 config AM33XX_CHILISOM
  24         bool
  25         select SUPPORT_SPL
  26
  27 choice
  28         prompt "AM33xx board select"
  29
  30 config TARGET_AM335X_EVM
  31         bool "Support am335x_evm"
  32         select BOARD_LATE_INIT
  33         select DM
  34         select DM_SERIAL
  35         select DM_GPIO
  36         select TI_I2C_BOARD_DETECT
  37         imply SPL_ENV_SUPPORT
  38         imply SPL_EXT_SUPPORT
  39         imply SPL_FAT_SUPPORT
  40         imply SPL_GPIO_SUPPORT
  41         imply SPL_I2C_SUPPORT
  42         imply SPL_LIBCOMMON_SUPPORT
  43         imply SPL_LIBDISK_SUPPORT
  44         imply SPL_LIBGENERIC_SUPPORT
  45         imply SPL_MMC_SUPPORT
  46         imply SPL_NAND_SUPPORT
  47         imply SPL_POWER_SUPPORT
  48         imply SPL_SERIAL_SUPPORT
  49         imply SPL_WATCHDOG_SUPPORT
  50         imply SPL_YMODEM_SUPPORT
  51         imply SPL_SYS_MALLOC_SIMPLE
  52         imply SPL_SEPARATE_BSS
  53         imply SPL_DM
  54         imply SPL_DM_SEQ_ALIAS
  55         imply SPL_OF_LIBFDT
  56         help
  57           This option specifies support for the AM335x
  58           GP and HS EVM development platforms. The AM335x
  59           GP EVM is a standalone test, development, and
  60           evaluation module system that enables developers
  61           to write software and develop hardware around
  62           an AM335x processor subsystem.
  63
  64 config TARGET_AM335X_BALTOS
  65         bool "Support am335x_baltos"
  66         select BOARD_LATE_INIT
  67         select DM
  68         select DM_SERIAL
  69         select DM_GPIO
  70
  71 config TARGET_AM335X_IGEP003X
  72         bool "Support am335x_igep003x"
  73         select BOARD_LATE_INIT
  74         select DM
  75         select DM_SERIAL
  76         select DM_GPIO
  77
  78 config TARGET_AM335X_SHC
  79         bool "Support am335x based shc board from bosch"
  80         select BOARD_LATE_INIT
  81         select DM
  82         select DM_SERIAL
  83         select DM_GPIO
  84         imply CMD_SPL
  85
  86 config TARGET_AM335X_SL50
  87         bool "Support am335x_sl50"
  88         select BOARD_LATE_INIT
  89         select DM
  90         select DM_SERIAL
  91         select DM_GPIO
  92
  93 config TARGET_BAV335X
  94         bool "Support bav335x"
  95         select BOARD_LATE_INIT
  96         select DM
  97         select DM_SERIAL
  98         help
  99           The BAV335x OEM Network Processor integrates all the functions of an
 100           embedded network computer in a small, easy to use SODIMM module which
 101           incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8
 102           processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit
 103           ethernet with simple connection to external connectors.
 104
 105           For more information, visit: http://birdland.com/oem
 106
 107 config TARGET_BRXRE1
 108         bool "Support BRXRE1"
 109         select BOARD_LATE_INIT
 110
 111 config TARGET_BRPPT1
 112         bool "Support BRPPT1"
 113         select BOARD_LATE_INIT
 114
 115 config TARGET_CHILIBOARD
 116         bool "Grinn chiliBoard"
 117         select AM33XX_CHILISOM
 118         select BOARD_LATE_INIT
 119         select DM
 120         select DM_SERIAL
 121
 122 config TARGET_CM_T335
 123         bool "Support cm_t335"
 124         select DM
 125         select DM_SERIAL
 126         select DM_GPIO
 127
 128 config TARGET_DRACO
 129         bool "Support draco"
 130         select BOARD_LATE_INIT
 131         select DM
 132         select DM_SERIAL
 133         select DM_GPIO
 134
 135 config TARGET_ETAMIN
 136         bool "Support etamin"
 137         select BOARD_LATE_INIT
 138         select DM
 139         select DM_SERIAL
 140         select DM_GPIO
 141
 142 config TARGET_PCM051
 143         bool "Support pcm051"
 144         select DM
 145         select DM_SERIAL
 146         select DM_GPIO
 147
 148 config TARGET_PENGWYN
 149         bool "Support pengwyn"
 150         select DM
 151         select DM_SERIAL
 152         select DM_GPIO
 153
 154 config TARGET_PEPPER
 155         bool "Support pepper"
 156         select DM
 157         select DM_SERIAL
 158         select DM_GPIO
 159
 160 config TARGET_PXM2
 161         bool "Support pxm2"
 162         select BOARD_LATE_INIT
 163         select DM
 164         select DM_SERIAL
 165         select DM_GPIO
 166
 167 config TARGET_RASTABAN
 168         bool "Support rastaban"
 169         select BOARD_LATE_INIT
 170         select DM
 171         select DM_SERIAL
 172         select DM_GPIO
 173
 174 config TARGET_RUT
 175         bool "Support rut"
 176         select BOARD_LATE_INIT
 177         select DM
 178         select DM_SERIAL
 179         select DM_GPIO
 180
 181 config TARGET_THUBAN
 182         bool "Support thuban"
 183         select BOARD_LATE_INIT
 184         select DM
 185         select DM_SERIAL
 186         select DM_GPIO
 187
 188 endchoice
 189
 190 endif
 191
 192 if AM43XX
 193
 194 choice
 195         prompt "AM43xx board select"
 196
 197 config TARGET_AM43XX_EVM
 198         bool "Support am43xx_evm"
 199         select BOARD_LATE_INIT
 200         select TI_I2C_BOARD_DETECT
 201         imply DM_ETH
 202         imply DM_I2C
 203         imply DM_SPI
 204         imply DM_SPI_FLASH
 205         imply SPI_FLASH_BAR
 206         imply SPL_ENV_SUPPORT
 207         imply SPL_EXT_SUPPORT
 208         imply SPL_FAT_SUPPORT
 209         imply SPL_GPIO_SUPPORT
 210         imply SPL_I2C_SUPPORT
 211         imply SPL_LIBCOMMON_SUPPORT
 212         imply SPL_LIBDISK_SUPPORT
 213         imply SPL_LIBGENERIC_SUPPORT
 214         imply SPL_MMC_SUPPORT
 215         imply SPL_NAND_SUPPORT
 216         imply SPL_POWER_SUPPORT
 217         imply SPL_SERIAL_SUPPORT
 218         imply SPL_WATCHDOG_SUPPORT
 219         imply SPL_YMODEM_SUPPORT
 220         help
 221           This option specifies support for the AM43xx
 222           GP and HS EVM development platforms.The AM437x
 223           GP EVM is a standalone test, development, and
 224           evaluation module system that enables developers
 225           to write software and develop hardware around
 226           an AM43xx processor subsystem.
 227
 228 config TARGET_CM_T43
 229         bool "Support cm_t43"
 230
 231 endchoice
 232
 233 endif
 234
 235 if AM43XX || AM33XX
 236 config ISW_ENTRY_ADDR
 237         hex "Address in memory or XIP flash of bootloader entry point"
 238         help
 239           After any reset, the boot ROM on the AM43XX SOC
 240           searches the boot media for a valid boot image.
 241           For non-XIP devices, the ROM then copies the
 242           image into internal memory.
 243           For all boot modes, after the ROM processes the
 244           boot image it eventually computes the entry
 245           point address depending on the device type
 246           (secure/non-secure), boot media (xip/non-xip) and
 247           image headers.
 248         default 0x402F4000 if AM43XX
 249         default 0x402F0400 if AM33XX
 250
 251 config PUB_ROM_DATA_SIZE
 252         hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
 253         help
 254           During the device boot, the public ROM uses the top of
 255           the public L3 OCMC RAM to store r/w data like stack,
 256           heap, globals etc. When the ROM is copying the boot
 257           image from the boot media into memory, the image must
 258           not spill over into this area. This value can be used
 259           during compile time to determine the maximum size of a
 260           boot image. Once the ROM transfers control to the boot
 261           image, this area is no longer used, and can be reclaimed
 262           for run time use by the boot image.
 263         default 0x8400
 264 endif