arch/arm/mach-tegra/Kconfig

   1 if TEGRA
   2
   3 config SPL_GPIO_SUPPORT
   4         default y
   5
   6 config SPL_LIBCOMMON_SUPPORT
   7         default y
   8
   9 config SPL_LIBGENERIC_SUPPORT
  10         default y
  11
  12 config SPL_SERIAL_SUPPORT
  13         default y
  14
  15 config TEGRA_IVC
  16         bool "Tegra IVC protocol"
  17         help
  18           IVC (Inter-VM Communication) protocol is a Tegra-specific IPC
  19           (Inter Processor Communication) framework. Within the context of
  20           U-Boot, it is typically used for communication between the main CPU
  21           and various auxiliary processors.
  22
  23 config TEGRA_COMMON
  24         bool "Tegra common options"
  25         select CLK
  26         select DM
  27         select DM_ETH
  28         select DM_GPIO
  29         select DM_I2C
  30         select DM_KEYBOARD
  31         select DM_MMC
  32         select DM_PWM
  33         select DM_RESET
  34         select DM_SERIAL
  35         select DM_SPI
  36         select DM_SPI_FLASH
  37         select MISC
  38         select OF_CONTROL
  39         select VIDCONSOLE_AS_LCD if DM_VIDEO
  40         select BOARD_EARLY_INIT_F
  41
  42 config TEGRA_NO_BPMP
  43         bool "Tegra common options for SoCs without BPMP"
  44         select TEGRA_CAR
  45         select TEGRA_CAR_CLOCK
  46         select TEGRA_CAR_RESET
  47
  48 config TEGRA_ARMV7_COMMON
  49         bool "Tegra 32-bit common options"
  50         select CPU_V7
  51         select SPL
  52         select SPL_BOARD_INIT if SPL
  53         select SUPPORT_SPL
  54         select TEGRA_COMMON
  55         select TEGRA_GPIO
  56         select TEGRA_NO_BPMP
  57
  58 config TEGRA_ARMV8_COMMON
  59         bool "Tegra 64-bit common options"
  60         select ARM64
  61         select TEGRA_COMMON
  62
  63 choice
  64         prompt "Tegra SoC select"
  65         optional
  66
  67 config TEGRA20
  68         bool "Tegra20 family"
  69         select ARM_ERRATA_716044
  70         select ARM_ERRATA_742230
  71         select ARM_ERRATA_751472
  72         select TEGRA_ARMV7_COMMON
  73
  74 config TEGRA30
  75         bool "Tegra30 family"
  76         select ARM_ERRATA_743622
  77         select ARM_ERRATA_751472
  78         select TEGRA_ARMV7_COMMON
  79
  80 config TEGRA114
  81         bool "Tegra114 family"
  82         select TEGRA_ARMV7_COMMON
  83
  84 config TEGRA124
  85         bool "Tegra124 family"
  86         select TEGRA_ARMV7_COMMON
  87
  88 config TEGRA210
  89         bool "Tegra210 family"
  90         select TEGRA_GPIO
  91         select TEGRA_ARMV8_COMMON
  92         select TEGRA_NO_BPMP
  93
  94 config TEGRA186
  95         bool "Tegra186 family"
  96         select DM_MAILBOX
  97         select TEGRA186_BPMP
  98         select TEGRA186_CLOCK
  99         select TEGRA186_GPIO
 100         select TEGRA186_RESET
 101         select TEGRA_ARMV8_COMMON
 102         select TEGRA_HSP
 103         select TEGRA_IVC
 104
 105 endchoice
 106
 107 config TEGRA_DISCONNECT_UDC_ON_BOOT
 108         bool "Disconnect USB device mode controller on boot"
 109         default y
 110         help
 111           When loading U-Boot into RAM over USB protocols using tools such as
 112           tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device
 113           mode controller is initialized and enumerated by the host PC running
 114           the tool. Unfortunately, these tools do not shut down the USB
 115           controller before executing the downloaded code, and so the host PC
 116           does not "de-enumerate" the USB device. This option shuts down the
 117           USB controller when U-Boot boots to avoid leaving a stale USB device
 118           present.
 119
 120 config SYS_MALLOC_F_LEN
 121         default 0x1800
 122
 123 source "arch/arm/mach-tegra/tegra20/Kconfig"
 124 source "arch/arm/mach-tegra/tegra30/Kconfig"
 125 source "arch/arm/mach-tegra/tegra114/Kconfig"
 126 source "arch/arm/mach-tegra/tegra124/Kconfig"
 127 source "arch/arm/mach-tegra/tegra210/Kconfig"
 128 source "arch/arm/mach-tegra/tegra186/Kconfig"
 129
 130 endif