arch/arm/mach-tegra/Kconfig

   1 if TEGRA
   2
   3 config SPL_GPIO_SUPPORT
   4         default y
   5
   6 config SPL_LIBCOMMON_SUPPORT
   7         default y
   8
   9 config SPL_LIBGENERIC_SUPPORT
  10         default y
  11
  12 config TEGRA_IVC
  13         bool "Tegra IVC protocol"
  14         help
  15           IVC (Inter-VM Communication) protocol is a Tegra-specific IPC
  16           (Inter Processor Communication) framework. Within the context of
  17           U-Boot, it is typically used for communication between the main CPU
  18           and various auxiliary processors.
  19
  20 config TEGRA_COMMON
  21         bool "Tegra common options"
  22         select DM
  23         select DM_ETH
  24         select DM_GPIO
  25         select DM_I2C
  26         select DM_KEYBOARD
  27         select DM_PCI
  28         select DM_PCI_COMPAT
  29         select DM_PWM
  30         select DM_SERIAL
  31         select DM_SPI
  32         select DM_SPI_FLASH
  33         select OF_CONTROL
  34         select VIDCONSOLE_AS_LCD if DM_VIDEO
  35
  36 config TEGRA_ARMV7_COMMON
  37         bool "Tegra 32-bit common options"
  38         select CPU_V7
  39         select SPL
  40         select SUPPORT_SPL
  41         select TEGRA_COMMON
  42         select TEGRA_GPIO
  43
  44 config TEGRA_ARMV8_COMMON
  45         bool "Tegra 64-bit common options"
  46         select ARM64
  47         select TEGRA_COMMON
  48
  49 choice
  50         prompt "Tegra SoC select"
  51         optional
  52
  53 config TEGRA20
  54         bool "Tegra20 family"
  55         select TEGRA_ARMV7_COMMON
  56
  57 config TEGRA30
  58         bool "Tegra30 family"
  59         select TEGRA_ARMV7_COMMON
  60
  61 config TEGRA114
  62         bool "Tegra114 family"
  63         select TEGRA_ARMV7_COMMON
  64
  65 config TEGRA124
  66         bool "Tegra124 family"
  67         select TEGRA_ARMV7_COMMON
  68
  69 config TEGRA210
  70         bool "Tegra210 family"
  71         select TEGRA_GPIO
  72         select TEGRA_ARMV8_COMMON
  73
  74 config TEGRA186
  75         bool "Tegra186 family"
  76         select CLK
  77         select DM_MAILBOX
  78         select DM_RESET
  79         select MISC
  80         select TEGRA186_BPMP
  81         select TEGRA186_CLOCK
  82         select TEGRA186_GPIO
  83         select TEGRA186_RESET
  84         select TEGRA_ARMV8_COMMON
  85         select TEGRA_HSP
  86         select TEGRA_IVC
  87
  88 endchoice
  89
  90 config TEGRA_DISCONNECT_UDC_ON_BOOT
  91         bool "Disconnect USB device mode controller on boot"
  92         default y
  93         help
  94           When loading U-Boot into RAM over USB protocols using tools such as
  95           tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device
  96           mode controller is initialized and enumerated by the host PC running
  97           the tool. Unfortunately, these tools do not shut down the USB
  98           controller before executing the downloaded code, and so the host PC
  99           does not "de-enumerate" the USB device. This option shuts down the
 100           USB controller when U-Boot boots to avoid leaving a stale USB device
 101           present.
 102
 103 config SYS_MALLOC_F_LEN
 104         default 0x1800
 105
 106 source "arch/arm/mach-tegra/tegra20/Kconfig"
 107 source "arch/arm/mach-tegra/tegra30/Kconfig"
 108 source "arch/arm/mach-tegra/tegra114/Kconfig"
 109 source "arch/arm/mach-tegra/tegra124/Kconfig"
 110 source "arch/arm/mach-tegra/tegra210/Kconfig"
 111 source "arch/arm/mach-tegra/tegra186/Kconfig"
 112
 113 endif