arch/arm/mach-tegra/Kconfig

   1 if TEGRA
   2
   3 config SPL_GPIO_SUPPORT
   4         default y
   5
   6 config SPL_LIBCOMMON_SUPPORT
   7         default y
   8
   9 config SPL_LIBGENERIC_SUPPORT
  10         default y
  11
  12 config SPL_SERIAL_SUPPORT
  13         default y
  14
  15 config TEGRA_IVC
  16         bool "Tegra IVC protocol"
  17         help
  18           IVC (Inter-VM Communication) protocol is a Tegra-specific IPC
  19           (Inter Processor Communication) framework. Within the context of
  20           U-Boot, it is typically used for communication between the main CPU
  21           and various auxiliary processors.
  22
  23 config TEGRA_COMMON
  24         bool "Tegra common options"
  25         select CLK
  26         select DM
  27         select DM_ETH
  28         select DM_GPIO
  29         select DM_I2C
  30         select DM_KEYBOARD
  31         select DM_MMC
  32         select DM_PCI
  33         select DM_PCI_COMPAT
  34         select DM_PWM
  35         select DM_RESET
  36         select DM_SERIAL
  37         select DM_SPI
  38         select DM_SPI_FLASH
  39         select MISC
  40         select OF_CONTROL
  41         select VIDCONSOLE_AS_LCD if DM_VIDEO
  42
  43 config TEGRA_NO_BPMP
  44         bool "Tegra common options for SoCs without BPMP"
  45         select TEGRA_CAR
  46         select TEGRA_CAR_CLOCK
  47         select TEGRA_CAR_RESET
  48
  49 config TEGRA_ARMV7_COMMON
  50         bool "Tegra 32-bit common options"
  51         select CPU_V7
  52         select SPL
  53         select SUPPORT_SPL
  54         select TEGRA_COMMON
  55         select TEGRA_GPIO
  56         select TEGRA_NO_BPMP
  57
  58 config TEGRA_ARMV8_COMMON
  59         bool "Tegra 64-bit common options"
  60         select ARM64
  61         select TEGRA_COMMON
  62
  63 choice
  64         prompt "Tegra SoC select"
  65         optional
  66
  67 config TEGRA20
  68         bool "Tegra20 family"
  69         select TEGRA_ARMV7_COMMON
  70
  71 config TEGRA30
  72         bool "Tegra30 family"
  73         select TEGRA_ARMV7_COMMON
  74
  75 config TEGRA114
  76         bool "Tegra114 family"
  77         select TEGRA_ARMV7_COMMON
  78
  79 config TEGRA124
  80         bool "Tegra124 family"
  81         select TEGRA_ARMV7_COMMON
  82
  83 config TEGRA210
  84         bool "Tegra210 family"
  85         select TEGRA_GPIO
  86         select TEGRA_ARMV8_COMMON
  87         select TEGRA_NO_BPMP
  88
  89 config TEGRA186
  90         bool "Tegra186 family"
  91         select DM_MAILBOX
  92         select TEGRA186_BPMP
  93         select TEGRA186_CLOCK
  94         select TEGRA186_GPIO
  95         select TEGRA186_RESET
  96         select TEGRA_ARMV8_COMMON
  97         select TEGRA_HSP
  98         select TEGRA_IVC
  99
 100 endchoice
 101
 102 config TEGRA_DISCONNECT_UDC_ON_BOOT
 103         bool "Disconnect USB device mode controller on boot"
 104         default y
 105         help
 106           When loading U-Boot into RAM over USB protocols using tools such as
 107           tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device
 108           mode controller is initialized and enumerated by the host PC running
 109           the tool. Unfortunately, these tools do not shut down the USB
 110           controller before executing the downloaded code, and so the host PC
 111           does not "de-enumerate" the USB device. This option shuts down the
 112           USB controller when U-Boot boots to avoid leaving a stale USB device
 113           present.
 114
 115 config SYS_MALLOC_F_LEN
 116         default 0x1800
 117
 118 source "arch/arm/mach-tegra/tegra20/Kconfig"
 119 source "arch/arm/mach-tegra/tegra30/Kconfig"
 120 source "arch/arm/mach-tegra/tegra114/Kconfig"
 121 source "arch/arm/mach-tegra/tegra124/Kconfig"
 122 source "arch/arm/mach-tegra/tegra210/Kconfig"
 123 source "arch/arm/mach-tegra/tegra186/Kconfig"
 124
 125 endif