arch/arm/mach-tegra/board2.c

   1 /*
   2  *  (C) Copyright 2010,2011
   3  *  NVIDIA Corporation <www.nvidia.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #include <common.h>
   9 #include <dm.h>
  10 #include <errno.h>
  11 #include <ns16550.h>
  12 #include <usb.h>
  13 #include <asm/io.h>
  14 #include <asm/arch-tegra/ap.h>
  15 #include <asm/arch-tegra/board.h>
  16 #include <asm/arch-tegra/clk_rst.h>
  17 #include <asm/arch-tegra/pmc.h>
  18 #include <asm/arch-tegra/sys_proto.h>
  19 #include <asm/arch-tegra/uart.h>
  20 #include <asm/arch-tegra/warmboot.h>
  21 #include <asm/arch-tegra/gpu.h>
  22 #include <asm/arch-tegra/usb.h>
  23 #include <asm/arch-tegra/xusb-padctl.h>
  24 #include <asm/arch/clock.h>
  25 #include <asm/arch/funcmux.h>
  26 #include <asm/arch/pinmux.h>
  27 #include <asm/arch/pmu.h>
  28 #include <asm/arch/tegra.h>
  29 #ifdef CONFIG_TEGRA_CLOCK_SCALING
  30 #include <asm/arch/emc.h>
  31 #endif
  32 #include <power/as3722.h>
  33 #include "emc.h"
  34
  35 DECLARE_GLOBAL_DATA_PTR;
  36
  37 #ifdef CONFIG_SPL_BUILD
  38 /* TODO(sjg@chromium.org): Remove once SPL supports device tree */
  39 U_BOOT_DEVICE(tegra_gpios) = {
  40         "gpio_tegra"
  41 };
  42 #endif
  43
  44 __weak void pinmux_init(void) {}
  45 __weak void pin_mux_usb(void) {}
  46 __weak void pin_mux_spi(void) {}
  47 __weak void pin_mux_mmc(void) {}
  48 __weak void gpio_early_init_uart(void) {}
  49 __weak void pin_mux_display(void) {}
  50 __weak void start_cpu_fan(void) {}
  51
  52 #if defined(CONFIG_TEGRA_NAND)
  53 __weak void pin_mux_nand(void)
  54 {
  55         funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_DEFAULT);
  56 }
  57 #endif
  58
  59 /*
  60  * Routine: power_det_init
  61  * Description: turn off power detects
  62  */
  63 static void power_det_init(void)
  64 {
  65 #if defined(CONFIG_TEGRA20)
  66         struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
  67
  68         /* turn off power detects */
  69         writel(0, &pmc->pmc_pwr_det_latch);
  70         writel(0, &pmc->pmc_pwr_det);
  71 #endif
  72 }
  73
  74 __weak int tegra_board_id(void)
  75 {
  76         return -1;
  77 }
  78
  79 #ifdef CONFIG_DISPLAY_BOARDINFO
  80 int checkboard(void)
  81 {
  82         int board_id = tegra_board_id();
  83
  84         printf("Board: %s", CONFIG_TEGRA_BOARD_STRING);
  85         if (board_id != -1)
  86                 printf(", ID: %d\n", board_id);
  87         printf("\n");
  88
  89         return 0;
  90 }
  91 #endif  /* CONFIG_DISPLAY_BOARDINFO */
  92
  93 __weak int tegra_lcd_pmic_init(int board_it)
  94 {
  95         return 0;
  96 }
  97
  98 __weak int nvidia_board_init(void)
  99 {
 100         return 0;
 101 }
 102
 103 /*
 104  * Routine: board_init
 105  * Description: Early hardware init.
 106  */
 107 int board_init(void)
 108 {
 109         __maybe_unused int err;
 110         __maybe_unused int board_id;
 111
 112         /* Do clocks and UART first so that printf() works */
 113         clock_init();
 114         clock_verify();
 115
 116         tegra_gpu_config();
 117
 118 #ifdef CONFIG_TEGRA_SPI
 119         pin_mux_spi();
 120 #endif
 121
 122 #ifdef CONFIG_MMC_SDHCI_TEGRA
 123         pin_mux_mmc();
 124 #endif
 125
 126         /* Init is handled automatically in the driver-model case */
 127 #if defined(CONFIG_DM_VIDEO)
 128         pin_mux_display();
 129 #endif
 130         /* boot param addr */
 131         gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
 132
 133         power_det_init();
 134
 135 #ifdef CONFIG_SYS_I2C_TEGRA
 136 # ifdef CONFIG_TEGRA_PMU
 137         if (pmu_set_nominal())
 138                 debug("Failed to select nominal voltages\n");
 139 #  ifdef CONFIG_TEGRA_CLOCK_SCALING
 140         err = board_emc_init();
 141         if (err)
 142                 debug("Memory controller init failed: %d\n", err);
 143 #  endif
 144 # endif /* CONFIG_TEGRA_PMU */
 145 #ifdef CONFIG_PMIC_AS3722
 146         err = as3722_init(NULL);
 147         if (err && err != -ENODEV)
 148                 return err;
 149 #endif
 150 #endif /* CONFIG_SYS_I2C_TEGRA */
 151
 152 #ifdef CONFIG_USB_EHCI_TEGRA
 153         pin_mux_usb();
 154 #endif
 155
 156 #if defined(CONFIG_DM_VIDEO)
 157         board_id = tegra_board_id();
 158         err = tegra_lcd_pmic_init(board_id);
 159         if (err)
 160                 return err;
 161 #endif
 162
 163 #ifdef CONFIG_TEGRA_NAND
 164         pin_mux_nand();
 165 #endif
 166
 167         tegra_xusb_padctl_init(gd->fdt_blob);
 168
 169 #ifdef CONFIG_TEGRA_LP0
 170         /* save Sdram params to PMC 2, 4, and 24 for WB0 */
 171         warmboot_save_sdram_params();
 172
 173         /* prepare the WB code to LP0 location */
 174         warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE);
 175 #endif
 176         return nvidia_board_init();
 177 }
 178
 179 #ifdef CONFIG_BOARD_EARLY_INIT_F
 180 static void __gpio_early_init(void)
 181 {
 182 }
 183
 184 void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init")));
 185
 186 int board_early_init_f(void)
 187 {
 188         if (!clock_early_init_done())
 189                 clock_early_init();
 190
 191 #if defined(CONFIG_TEGRA_DISCONNECT_UDC_ON_BOOT)
 192 #define USBCMD_FS2 (1 << 15)
 193         {
 194                 struct usb_ctlr *usbctlr = (struct usb_ctlr *)0x7d000000;
 195                 writel(USBCMD_FS2, &usbctlr->usb_cmd);
 196         }
 197 #endif
 198
 199         /* Do any special system timer/TSC setup */
 200 #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
 201         if (!tegra_cpu_is_non_secure())
 202 #endif
 203                 arch_timer_init();
 204
 205         pinmux_init();
 206         board_init_uart_f();
 207
 208         /* Initialize periph GPIOs */
 209         gpio_early_init();
 210         gpio_early_init_uart();
 211
 212         return 0;
 213 }
 214 #endif  /* EARLY_INIT */
 215
 216 int board_late_init(void)
 217 {
 218 #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
 219         if (tegra_cpu_is_non_secure()) {
 220                 printf("CPU is in NS mode\n");
 221                 setenv("cpu_ns_mode", "1");
 222         } else {
 223                 setenv("cpu_ns_mode", "");
 224         }
 225 #endif
 226         start_cpu_fan();
 227
 228         return 0;
 229 }
 230
 231 /*
 232  * In some SW environments, a memory carve-out exists to house a secure
 233  * monitor, a trusted OS, and/or various statically allocated media buffers.
 234  *
 235  * This carveout exists at the highest possible address that is within a
 236  * 32-bit physical address space.
 237  *
 238  * This function returns the total size of this carve-out. At present, the
 239  * returned value is hard-coded for simplicity. In the future, it may be
 240  * possible to determine the carve-out size:
 241  * - By querying some run-time information source, such as:
 242  *   - A structure passed to U-Boot by earlier boot software.
 243  *   - SoC registers.
 244  *   - A call into the secure monitor.
 245  * - In the per-board U-Boot configuration header, based on knowledge of the
 246  *   SW environment that U-Boot is being built for.
 247  *
 248  * For now, we support two configurations in U-Boot:
 249  * - 32-bit ports without any form of carve-out.
 250  * - 64 bit ports which are assumed to use a carve-out of a conservatively
 251  *   hard-coded size.
 252  */
 253 static ulong carveout_size(void)
 254 {
 255 #ifdef CONFIG_ARM64
 256         return SZ_512M;
 257 #else
 258         return 0;
 259 #endif
 260 }
 261
 262 /*
 263  * Determine the amount of usable RAM below 4GiB, taking into account any
 264  * carve-out that may be assigned.
 265  */
 266 static ulong usable_ram_size_below_4g(void)
 267 {
 268         ulong total_size_below_4g;
 269         ulong usable_size_below_4g;
 270
 271         /*
 272          * The total size of RAM below 4GiB is the lesser address of:
 273          * (a) 2GiB itself (RAM starts at 2GiB, and 4GiB - 2GiB == 2GiB).
 274          * (b) The size RAM physically present in the system.
 275          */
 276         if (gd->ram_size < SZ_2G)
 277                 total_size_below_4g = gd->ram_size;
 278         else
 279                 total_size_below_4g = SZ_2G;
 280
 281         /* Calculate usable RAM by subtracting out any carve-out size */
 282         usable_size_below_4g = total_size_below_4g - carveout_size();
 283
 284         return usable_size_below_4g;
 285 }
 286
 287 /*
 288  * Represent all available RAM in either one or two banks.
 289  *
 290  * The first bank describes any usable RAM below 4GiB.
 291  * The second bank describes any RAM above 4GiB.
 292  *
 293  * This split is driven by the following requirements:
 294  * - The NVIDIA L4T kernel requires separate entries in the DT /memory/reg
 295  *   property for memory below and above the 4GiB boundary. The layout of that
 296  *   DT property is directly driven by the entries in the U-Boot bank array.
 297  * - The potential existence of a carve-out at the end of RAM below 4GiB can
 298  *   only be represented using multiple banks.
 299  *
 300  * Explicitly removing the carve-out RAM from the bank entries makes the RAM
 301  * layout a bit more obvious, e.g. when running "bdinfo" at the U-Boot
 302  * command-line.
 303  *
 304  * This does mean that the DT U-Boot passes to the Linux kernel will not
 305  * include this RAM in /memory/reg at all. An alternative would be to include
 306  * all RAM in the U-Boot banks (and hence DT), and add a /memreserve/ node
 307  * into DT to stop the kernel from using the RAM. IIUC, I don't /think/ the
 308  * Linux kernel will ever need to access any RAM in* the carve-out via a CPU
 309  * mapping, so either way is acceptable.
 310  *
 311  * On 32-bit systems, we never define a bank for RAM above 4GiB, since the
 312  * start address of that bank cannot be represented in the 32-bit .size
 313  * field.
 314  */
 315 int dram_init_banksize(void)
 316 {
 317         gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 318         gd->bd->bi_dram[0].size = usable_ram_size_below_4g();
 319
 320 #ifdef CONFIG_PCI
 321         gd->pci_ram_top = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
 322 #endif
 323
 324 #ifdef CONFIG_PHYS_64BIT
 325         if (gd->ram_size > SZ_2G) {
 326                 gd->bd->bi_dram[1].start = 0x100000000;
 327                 gd->bd->bi_dram[1].size = gd->ram_size - SZ_2G;
 328         } else
 329 #endif
 330         {
 331                 gd->bd->bi_dram[1].start = 0;
 332                 gd->bd->bi_dram[1].size = 0;
 333         }
 334
 335         return 0;
 336 }
 337
 338 /*
 339  * Most hardware on 64-bit Tegra is still restricted to DMA to the lower
 340  * 32-bits of the physical address space. Cap the maximum usable RAM area
 341  * at 4 GiB to avoid DMA buffers from being allocated beyond the 32-bit
 342  * boundary that most devices can address. Also, don't let U-Boot use any
 343  * carve-out, as mentioned above.
 344  *
 345  * This function is called before dram_init_banksize(), so we can't simply
 346  * return gd->bd->bi_dram[1].start + gd->bd->bi_dram[1].size.
 347  */
 348 ulong board_get_usable_ram_top(ulong total_size)
 349 {
 350         return CONFIG_SYS_SDRAM_BASE + usable_ram_size_below_4g();
 351 }