]>
git.ipfire.org Git - people/ms/u-boot.git/blob - arch/powerpc/cpu/mpc86xx/speed.c
2 * Copyright 2004 Freescale Semiconductor.
4 * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
6 * (C) Copyright 2000-2002
7 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
9 * SPDX-License-Identifier: GPL-2.0+
14 #include <asm/processor.h>
17 DECLARE_GLOBAL_DATA_PTR
;
19 /* used in some defintiions of CONFIG_SYS_CLK_FREQ */
20 extern unsigned long get_board_sys_clk(unsigned long dummy
);
22 void get_sys_info(sys_info_t
*sysInfo
)
24 volatile immap_t
*immap
= (immap_t
*) CONFIG_SYS_IMMR
;
25 volatile ccsr_gur_t
*gur
= &immap
->im_gur
;
26 uint plat_ratio
, e600_ratio
;
29 plat_ratio
= (gur
->porpllsr
) & 0x0000003e;
34 sysInfo
->freqSystemBus
= 16 * CONFIG_SYS_CLK_FREQ
;
46 sysInfo
->freqSystemBus
= plat_ratio
* CONFIG_SYS_CLK_FREQ
;
49 sysInfo
->freqSystemBus
= 0;
53 e600_ratio
= (gur
->porpllsr
) & 0x003f0000;
58 sysInfo
->freqProcessor
= 2 * sysInfo
->freqSystemBus
;
61 sysInfo
->freqProcessor
= 5 * sysInfo
->freqSystemBus
/ 2;
64 sysInfo
->freqProcessor
= 3 * sysInfo
->freqSystemBus
;
67 sysInfo
->freqProcessor
= 7 * sysInfo
->freqSystemBus
/ 2;
70 sysInfo
->freqProcessor
= 4 * sysInfo
->freqSystemBus
;
73 sysInfo
->freqProcessor
= 9 * sysInfo
->freqSystemBus
/ 2;
76 sysInfo
->freqProcessor
= e600_ratio
+ sysInfo
->freqSystemBus
;
80 #if defined(CONFIG_SYS_LBC_LCRR)
81 /* We will program LCRR to this value later */
82 lcrr_div
= CONFIG_SYS_LBC_LCRR
& LCRR_CLKDIV
;
84 lcrr_div
= in_be32(&immap
->im_lbc
.lcrr
) & LCRR_CLKDIV
;
86 if (lcrr_div
== 2 || lcrr_div
== 4 || lcrr_div
== 8) {
87 sysInfo
->freqLocalBus
= sysInfo
->freqSystemBus
/ (lcrr_div
* 2);
89 /* In case anyone cares what the unknown value is */
90 sysInfo
->freqLocalBus
= lcrr_div
;
96 * Measure CPU clock speed (core clock GCLK1, GCLK2)
97 * (Approx. GCLK frequency in Hz)
104 get_sys_info(&sys_info
);
105 gd
->cpu_clk
= sys_info
.freqProcessor
;
106 gd
->bus_clk
= sys_info
.freqSystemBus
;
107 gd
->arch
.lbc_clk
= sys_info
.freqLocalBus
;
110 * The base clock for I2C depends on the actual SOC. Unfortunately,
111 * there is no pattern that can be used to determine the frequency, so
112 * the only choice is to look up the actual SOC number and use the value
113 * for that SOC. This information is taken from application note
116 #ifdef CONFIG_MPC8610
117 gd
->arch
.i2c1_clk
= sys_info
.freqSystemBus
;
119 gd
->arch
.i2c1_clk
= sys_info
.freqSystemBus
/ 2;
121 gd
->arch
.i2c2_clk
= gd
->arch
.i2c1_clk
;
123 if (gd
->cpu_clk
!= 0)
132 * Return system bus freq in Hz
135 ulong
get_bus_freq(ulong dummy
)
140 get_sys_info(&sys_info
);
141 val
= sys_info
.freqSystemBus
;