arch/powerpc/include/asm/ppc460ex_gt.h

   1 /*
   2  * (C) Copyright 2010
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef _PPC460EX_GT_H_
   9 #define _PPC460EX_GT_H_
  10
  11 #define CONFIG_SDRAM_PPC4xx_IBM_DDR2    /* IBM DDR(2) controller */
  12
  13 #define CONFIG_NAND_NDFC
  14
  15 /*
  16  * Some SoC specific registers
  17  */
  18
  19 /* Memory mapped registers */
  20 #define CONFIG_SYS_PERIPHERAL_BASE      0xef600000 /* Internal Peripherals */
  21
  22 #ifndef CONFIG_DM_SERIAL
  23 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
  24 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400)
  25 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_PERIPHERAL_BASE + 0x0500)
  26 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_PERIPHERAL_BASE + 0x0600)
  27 #endif
  28
  29 #define GPIO0_BASE              (CONFIG_SYS_PERIPHERAL_BASE + 0x0b00)
  30 #define GPIO1_BASE              (CONFIG_SYS_PERIPHERAL_BASE + 0x0c00)
  31
  32 /* DCR */
  33 #define AHB_TOP                 0x00a4
  34 #define AHB_BOT                 0x00a5
  35
  36 /* SDR */
  37 #define SDR0_PCI0               0x01c0
  38 #define SDR0_AHB_CFG            0x0370
  39 #define SDR0_USB2HOST_CFG       0x0371
  40 #define SDR0_ETH_PLL            0x4102
  41 #define SDR0_ETH_CFG            0x4103
  42 #define SDR0_ETH_STS            0x4104
  43
  44 /*
  45  * Register bits and masks
  46  */
  47 #define SDR0_SDSTP1_PAE_MASK            (0x80000000 >> 13)
  48 #define SDR0_SDSTP1_PISE_MASK           (0x80000000 >> 15)
  49
  50 /* CUST0 Customer Configuration Register0 */
  51 #define SDR0_CUST0_MUX_E_N_G_MASK       0xC0000000 /* Mux_Emac_NDFC_GPIO */
  52 #define SDR0_CUST0_MUX_EMAC_SEL         0x40000000 /* Emac Selection */
  53 #define SDR0_CUST0_MUX_NDFC_SEL         0x80000000 /* NDFC Selection */
  54 #define SDR0_CUST0_MUX_GPIO_SEL         0xC0000000 /* GPIO Selection */
  55
  56 #define SDR0_CUST0_NDFC_EN_MASK         0x20000000 /* NDFC Enable Mask */
  57 #define SDR0_CUST0_NDFC_ENABLE          0x20000000 /* NDFC Enable */
  58 #define SDR0_CUST0_NDFC_DISABLE         0x00000000 /* NDFC Disable */
  59
  60 #define SDR0_CUST0_NDFC_BW_MASK         0x10000000 /* NDFC Boot Width */
  61 #define SDR0_CUST0_NDFC_BW_16_BIT       0x10000000 /* NDFC Boot Width = 16 Bit */
  62 #define SDR0_CUST0_NDFC_BW_8_BIT        0x00000000 /* NDFC Boot Width =  8 Bit */
  63
  64 #define SDR0_CUST0_NDFC_BP_MASK         0x0F000000 /* NDFC Boot Page */
  65 #define SDR0_CUST0_NDFC_BP_ENCODE(n)    ((((u32)(n)) & 0xF) << 24)
  66 #define SDR0_CUST0_NDFC_BP_DECODE(n)    ((((u32)(n)) >> 24) & 0xF)
  67
  68 #define SDR0_CUST0_NDFC_BAC_MASK        0x00C00000 /* NDFC Boot Address Cycle */
  69 #define SDR0_CUST0_NDFC_BAC_ENCODE(n)   ((((u32)(n)) & 0x3) << 22)
  70 #define SDR0_CUST0_NDFC_BAC_DECODE(n)   ((((u32)(n)) >> 22) & 0x3)
  71
  72 #define SDR0_CUST0_NDFC_ARE_MASK        0x00200000 /* NDFC Auto Read Enable */
  73 #define SDR0_CUST0_NDFC_ARE_ENABLE      0x00200000 /* NDFC Auto Read Enable */
  74 #define SDR0_CUST0_NDFC_ARE_DISABLE     0x00000000 /* NDFC Auto Read Disable */
  75
  76 #define SDR0_CUST0_NRB_MASK             0x00100000 /* NDFC Ready / Busy */
  77 #define SDR0_CUST0_NRB_BUSY             0x00100000 /* Busy */
  78 #define SDR0_CUST0_NRB_READY            0x00000000 /* Ready */
  79
  80 #define SDR0_CUST0_NDRSC_MASK           0x0000FFF0 /* NDFC Device Reset Count Mask */
  81 #define SDR0_CUST0_NDRSC_ENCODE(n)      ((((u32)(n)) & 0xFFF) << 4)
  82 #define SDR0_CUST0_NDRSC_DECODE(n)      ((((u32)(n)) >> 4) & 0xFFF)
  83
  84 #define SDR0_CUST0_CHIPSELGAT_MASK      0x0000000F /* Chip Select Gating Mask */
  85 #define SDR0_CUST0_CHIPSELGAT_DIS       0x00000000 /* Chip Select Gating Disable */
  86 #define SDR0_CUST0_CHIPSELGAT_ENALL     0x0000000F /*All Chip Select Gating Enable*/
  87 #define SDR0_CUST0_CHIPSELGAT_EN0       0x00000008 /* Chip Select0 Gating Enable */
  88 #define SDR0_CUST0_CHIPSELGAT_EN1       0x00000004 /* Chip Select1 Gating Enable */
  89 #define SDR0_CUST0_CHIPSELGAT_EN2       0x00000002 /* Chip Select2 Gating Enable */
  90 #define SDR0_CUST0_CHIPSELGAT_EN3       0x00000001 /* Chip Select3 Gating Enable */
  91
  92 /* Ethernet PLL Configuration Register (SDR0_ETH_PLL) */
  93 #define SDR0_ETH_PLL_PLLLOCK    0x80000000      /* Ethernet PLL lock indication */
  94
  95 /* Ethernet Configuration Register (SDR0_ETH_CFG) */
  96 #define SDR0_ETH_CFG_SGMII3_LPBK        0x00800000 /*SGMII3 port loopback
  97                                                     enable */
  98 #define SDR0_ETH_CFG_SGMII2_LPBK        0x00400000 /*SGMII2 port loopback
  99                                                     enable */
 100 #define SDR0_ETH_CFG_SGMII1_LPBK        0x00200000 /*SGMII1 port loopback
 101                                                     enable */
 102 #define SDR0_ETH_CFG_SGMII0_LPBK        0x00100000 /*SGMII0 port loopback
 103                                                     enable */
 104 #define SDR0_ETH_CFG_SGMII_MASK         0x00070000 /*SGMII Mask */
 105 #define SDR0_ETH_CFG_SGMII2_ENABLE      0x00040000 /*SGMII2 port enable */
 106 #define SDR0_ETH_CFG_SGMII1_ENABLE      0x00020000 /*SGMII1 port enable */
 107 #define SDR0_ETH_CFG_SGMII0_ENABLE      0x00010000 /*SGMII0 port enable */
 108 #define SDR0_ETH_CFG_TAHOE1_BYPASS      0x00002000 /*TAHOE1 Bypass selector */
 109 #define SDR0_ETH_CFG_TAHOE0_BYPASS      0x00001000 /*TAHOE0 Bypass selector */
 110 #define SDR0_ETH_CFG_EMAC3_PHY_CLK_SEL  0x00000800 /*EMAC 3 PHY clock selector*/
 111 #define SDR0_ETH_CFG_EMAC2_PHY_CLK_SEL  0x00000400 /*EMAC 2 PHY clock selector*/
 112 #define SDR0_ETH_CFG_EMAC1_PHY_CLK_SEL  0x00000200 /*EMAC 1 PHY clock selector*/
 113 #define SDR0_ETH_CFG_EMAC0_PHY_CLK_SEL  0x00000100 /*EMAC 0 PHY clock selector*/
 114 #define SDR0_ETH_CFG_EMAC_2_1_SWAP      0x00000080 /*Swap EMAC2 with EMAC1 */
 115 #define SDR0_ETH_CFG_EMAC_0_3_SWAP      0x00000040 /*Swap EMAC0 with EMAC3 */
 116 #define SDR0_ETH_CFG_MDIO_SEL_MASK      0x00000030 /*MDIO source selector mask*/
 117 #define SDR0_ETH_CFG_MDIO_SEL_EMAC0     0x00000000 /*MDIO source - EMAC0 */
 118 #define SDR0_ETH_CFG_MDIO_SEL_EMAC1     0x00000010 /*MDIO source - EMAC1 */
 119 #define SDR0_ETH_CFG_MDIO_SEL_EMAC2     0x00000020 /*MDIO source - EMAC2 */
 120 #define SDR0_ETH_CFG_MDIO_SEL_EMAC3     0x00000030 /*MDIO source - EMAC3 */
 121 #define SDR0_ETH_CFG_GMC1_BRIDGE_SEL    0x00000002 /*GMC Port 1 bridge
 122                                                      selector */
 123 #define SDR0_ETH_CFG_GMC0_BRIDGE_SEL    0x00000001 /*GMC Port 0 bridge
 124                                                     selector */
 125
 126 #define SDR0_SRST0_BGO          0x80000000 /* PLB to OPB bridge */
 127 #define SDR0_SRST0_PLB4         0x40000000 /* PLB4 arbiter */
 128 #define SDR0_SRST0_EBC          0x20000000 /* External bus controller */
 129 #define SDR0_SRST0_OPB          0x10000000 /* OPB arbiter */
 130 #define SDR0_SRST0_UART0        0x08000000 /* Universal asynchronous receiver/
 131                                               transmitter 0 */
 132 #define SDR0_SRST0_UART1        0x04000000 /* Universal asynchronous receiver/
 133                                               transmitter 1 */
 134 #define SDR0_SRST0_IIC0         0x02000000 /* Inter integrated circuit 0 */
 135 #define SDR0_SRST0_IIC1         0x01000000 /* Inter integrated circuit 1 */
 136 #define SDR0_SRST0_GPIO0        0x00800000 /* General purpose I/O 0 */
 137 #define SDR0_SRST0_GPT          0x00400000 /* General purpose timer */
 138 #define SDR0_SRST0_DMC          0x00200000 /* DDR SDRAM memory controller */
 139 #define SDR0_SRST0_PCI          0x00100000 /* PCI */
 140 #define SDR0_SRST0_CPM0         0x00020000 /* Clock and power management */
 141 #define SDR0_SRST0_IMU          0x00010000 /* I2O DMA */
 142 #define SDR0_SRST0_UIC0         0x00008000 /* Universal interrupt controller 0*/
 143 #define SDR0_SRST0_UIC1         0x00004000 /* Universal interrupt controller 1*/
 144 #define SDR0_SRST0_SRAM         0x00002000 /* Universal interrupt controller 0*/
 145 #define SDR0_SRST0_UIC2         0x00001000 /* Universal interrupt controller 2*/
 146 #define SDR0_SRST0_UIC3         0x00000800 /* Universal interrupt controller 3*/
 147 #define SDR0_SRST0_OCM          0x00000400 /* Universal interrupt controller 0*/
 148 #define SDR0_SRST0_UART2        0x00000200 /* Universal asynchronous receiver/
 149                                               transmitter 2 */
 150 #define SDR0_SRST0_MAL          0x00000100 /* Media access layer */
 151 #define SDR0_SRST0_GPTR         0x00000040 /* General purpose timer */
 152 #define SDR0_SRST0_L2CACHE      0x00000004 /* L2 Cache */
 153 #define SDR0_SRST0_UART3        0x00000002 /* Universal asynchronous receiver/
 154                                               transmitter 3 */
 155 #define SDR0_SRST0_GPIO1        0x00000001 /* General purpose I/O 1 */
 156
 157 #define SDR0_SRST1_RLL          0x80000000 /* SRIO RLL */
 158 #define SDR0_SRST1_SCP          0x40000000 /* Serial communications port */
 159 #define SDR0_SRST1_PLBARB       0x20000000 /* PLB Arbiter */
 160 #define SDR0_SRST1_EIPPKP       0x10000000 /* EIPPPKP */
 161 #define SDR0_SRST1_EIP94        0x08000000 /* EIP 94 */
 162 #define SDR0_SRST1_EMAC0        0x04000000 /* Ethernet media access
 163                                               controller 0 */
 164 #define SDR0_SRST1_EMAC1        0x02000000 /* Ethernet media access
 165                                               controller 1 */
 166 #define SDR0_SRST1_EMAC2        0x01000000 /* Ethernet media access
 167                                               controller 2 */
 168 #define SDR0_SRST1_EMAC3        0x00800000 /* Ethernet media access
 169                                               controller 3 */
 170 #define SDR0_SRST1_ZMII         0x00400000 /* Ethernet ZMII/RMII/SMII */
 171 #define SDR0_SRST1_RGMII0       0x00200000 /* Ethernet RGMII/RTBI 0 */
 172 #define SDR0_SRST1_RGMII1       0x00100000 /* Ethernet RGMII/RTBI 1 */
 173 #define SDR0_SRST1_DMA4         0x00080000 /* DMA to PLB4 */
 174 #define SDR0_SRST1_DMA4CH       0x00040000 /* DMA Channel to PLB4 */
 175 #define SDR0_SRST1_SATAPHY      0x00020000 /* Serial ATA PHY */
 176 #define SDR0_SRST1_SRIODEV      0x00010000 /* Serial Rapid IO core, PCS, and
 177                                               serdes */
 178 #define SDR0_SRST1_SRIOPCS      0x00008000 /* Serial Rapid IO core and PCS */
 179 #define SDR0_SRST1_NDFC         0x00004000 /* Nand flash controller */
 180 #define SDR0_SRST1_SRIOPLB      0x00002000 /* Serial Rapid IO PLB */
 181 #define SDR0_SRST1_ETHPLL       0x00001000 /* Ethernet PLL */
 182 #define SDR0_SRST1_TAHOE1       0x00000800 /* Ethernet Tahoe 1 */
 183 #define SDR0_SRST1_TAHOE0       0x00000400 /* Ethernet Tahoe 0 */
 184 #define SDR0_SRST1_SGMII0       0x00000200 /* Ethernet SGMII 0 */
 185 #define SDR0_SRST1_SGMII1       0x00000100 /* Ethernet SGMII 1 */
 186 #define SDR0_SRST1_SGMII2       0x00000080 /* Ethernet SGMII 2 */
 187 #define SDR0_SRST1_AHB          0x00000040 /* PLB4XAHB bridge */
 188 #define SDR0_SRST1_USBOTGPHY    0x00000020 /* USB 2.0 OTG PHY */
 189 #define SDR0_SRST1_USBOTG       0x00000010 /* USB 2.0 OTG controller */
 190 #define SDR0_SRST1_USBHOST      0x00000008 /* USB 2.0 Host controller */
 191 #define SDR0_SRST1_AHBDMAC      0x00000004 /* AHB DMA controller */
 192 #define SDR0_SRST1_AHBICM       0x00000002 /* AHB inter-connect matrix */
 193 #define SDR0_SRST1_SATA         0x00000001 /* Serial ATA controller */
 194
 195 #define PLLSYS0_FWD_DIV_A_MASK  0x000000f0      /* Fwd Div A */
 196 #define PLLSYS0_FWD_DIV_B_MASK  0x0000000f      /* Fwd Div B */
 197 #define PLLSYS0_FB_DIV_MASK     0x0000ff00      /* Feedback divisor */
 198 #define PLLSYS0_OPB_DIV_MASK    0x0c000000      /* OPB Divisor */
 199 #define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000     /* PLB Early Clock Divisor */
 200 #define PLLSYS0_PERCLK_DIV_MASK 0x03000000      /* Peripheral Clk Divisor */
 201 #define PLLSYS0_SEL_MASK        0x18000000      /* 0 = PLL, 1 = PerClk */
 202
 203 #define CPR0_ICFG_RLI_MASK      0x80000000
 204
 205 #define CPR0_PLLC_RST           0x80000000
 206 #define CPR0_PLLC_ENG           0x40000000
 207
 208 #define PCIL0_BRDGOPT1          (PCIL0_CFGBASE + 0x0040)
 209 #define PCIL0_BRDGOPT2          (PCIL0_CFGBASE + 0x0044)
 210
 211 #endif /* _PPC460EX_GT_H_ */