]> git.ipfire.org Git - people/ms/u-boot.git/blob - arch/x86/dts/dfi-bt700.dtsi
arm64: ls2088ardb: Add distro secure boot support
[people/ms/u-boot.git] / arch / x86 / dts / dfi-bt700.dtsi
1 /*
2 * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
3 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8 #include <asm/arch-baytrail/fsp/fsp_configs.h>
9 #include <dt-bindings/gpio/x86-gpio.h>
10 #include <dt-bindings/interrupt-router/intel-irq.h>
11
12 #include "skeleton.dtsi"
13 #include "rtc.dtsi"
14 #include "tsc_timer.dtsi"
15
16 / {
17 config {
18 silent_console = <0>;
19 };
20
21 pch_pinctrl {
22 compatible = "intel,x86-pinctrl";
23 reg = <0 0>;
24
25 /* Add UART1 PAD configuration (SIO HS-UART) */
26 uart1_txd@0 {
27 pad-offset = <0x10>;
28 mode-func = <1>;
29 };
30
31 uart1_rxd@0 {
32 pad-offset = <0x20>;
33 mode-func = <1>;
34 };
35
36 /*
37 * As of today, the latest version FSP (gold4) for BayTrail
38 * misses the PAD configuration of the SD controller's Card
39 * Detect signal. The default PAD value for the CD pin sets
40 * the pin to work in GPIO mode, which causes card detect
41 * status cannot be reflected by the Present State register
42 * in the SD controller (bit 16 & bit 18 are always zero).
43 *
44 * Configure this pin to function 1 (SD controller).
45 */
46 sdmmc3_cd@0 {
47 pad-offset = <0x3a0>;
48 mode-func = <1>;
49 };
50 };
51
52 chosen {
53 stdout-path = "/serial";
54 };
55
56 cpus {
57 #address-cells = <1>;
58 #size-cells = <0>;
59
60 cpu@0 {
61 device_type = "cpu";
62 compatible = "intel,baytrail-cpu";
63 reg = <0>;
64 intel,apic-id = <0>;
65 };
66
67 cpu@1 {
68 device_type = "cpu";
69 compatible = "intel,baytrail-cpu";
70 reg = <1>;
71 intel,apic-id = <2>;
72 };
73
74 cpu@2 {
75 device_type = "cpu";
76 compatible = "intel,baytrail-cpu";
77 reg = <2>;
78 intel,apic-id = <4>;
79 };
80
81 cpu@3 {
82 device_type = "cpu";
83 compatible = "intel,baytrail-cpu";
84 reg = <3>;
85 intel,apic-id = <6>;
86 };
87 };
88
89 pci {
90 compatible = "intel,pci-baytrail", "pci-x86";
91 #address-cells = <3>;
92 #size-cells = <2>;
93 u-boot,dm-pre-reloc;
94 ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000
95 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
96 0x01000000 0x0 0x2000 0x2000 0 0xe000>;
97
98 pciuart0: uart@1e,3 {
99 compatible = "pci8086,0f0a.00",
100 "pci8086,0f0a",
101 "pciclass,070002",
102 "pciclass,0700",
103 "ns16550";
104 u-boot,dm-pre-reloc;
105 reg = <0x0200f310 0x0 0x0 0x0 0x0>;
106 reg-shift = <2>;
107 clock-frequency = <58982400>;
108 current-speed = <115200>;
109 };
110
111 pch@1f,0 {
112 reg = <0x0000f800 0 0 0 0>;
113 compatible = "pci8086,0f1c", "intel,pch9";
114 #address-cells = <1>;
115 #size-cells = <1>;
116
117 irq-router {
118 compatible = "intel,irq-router";
119 intel,pirq-config = "ibase";
120 intel,ibase-offset = <0x50>;
121 intel,actl-addr = <0>;
122 intel,pirq-link = <8 8>;
123 intel,pirq-mask = <0xdee0>;
124 intel,pirq-routing = <
125 /* BayTrail PCI devices */
126 PCI_BDF(0, 2, 0) INTA PIRQA
127 PCI_BDF(0, 3, 0) INTA PIRQA
128 PCI_BDF(0, 16, 0) INTA PIRQA
129 PCI_BDF(0, 17, 0) INTA PIRQA
130 PCI_BDF(0, 18, 0) INTA PIRQA
131 PCI_BDF(0, 19, 0) INTA PIRQA
132 PCI_BDF(0, 20, 0) INTA PIRQA
133 PCI_BDF(0, 21, 0) INTA PIRQA
134 PCI_BDF(0, 22, 0) INTA PIRQA
135 PCI_BDF(0, 23, 0) INTA PIRQA
136 PCI_BDF(0, 24, 0) INTA PIRQA
137 PCI_BDF(0, 24, 1) INTC PIRQC
138 PCI_BDF(0, 24, 2) INTD PIRQD
139 PCI_BDF(0, 24, 3) INTB PIRQB
140 PCI_BDF(0, 24, 4) INTA PIRQA
141 PCI_BDF(0, 24, 5) INTC PIRQC
142 PCI_BDF(0, 24, 6) INTD PIRQD
143 PCI_BDF(0, 24, 7) INTB PIRQB
144 PCI_BDF(0, 26, 0) INTA PIRQA
145 PCI_BDF(0, 27, 0) INTA PIRQA
146 PCI_BDF(0, 28, 0) INTA PIRQA
147 PCI_BDF(0, 28, 1) INTB PIRQB
148 PCI_BDF(0, 28, 2) INTC PIRQC
149 PCI_BDF(0, 28, 3) INTD PIRQD
150 PCI_BDF(0, 29, 0) INTA PIRQA
151 PCI_BDF(0, 30, 0) INTA PIRQA
152 PCI_BDF(0, 30, 1) INTD PIRQD
153 PCI_BDF(0, 30, 2) INTB PIRQB
154 PCI_BDF(0, 30, 3) INTC PIRQC
155 PCI_BDF(0, 30, 4) INTD PIRQD
156 PCI_BDF(0, 30, 5) INTB PIRQB
157 PCI_BDF(0, 31, 3) INTB PIRQB
158
159 /*
160 * PCIe root ports downstream
161 * interrupts
162 */
163 PCI_BDF(1, 0, 0) INTA PIRQA
164 PCI_BDF(1, 0, 0) INTB PIRQB
165 PCI_BDF(1, 0, 0) INTC PIRQC
166 PCI_BDF(1, 0, 0) INTD PIRQD
167 PCI_BDF(2, 0, 0) INTA PIRQB
168 PCI_BDF(2, 0, 0) INTB PIRQC
169 PCI_BDF(2, 0, 0) INTC PIRQD
170 PCI_BDF(2, 0, 0) INTD PIRQA
171 PCI_BDF(3, 0, 0) INTA PIRQC
172 PCI_BDF(3, 0, 0) INTB PIRQD
173 PCI_BDF(3, 0, 0) INTC PIRQA
174 PCI_BDF(3, 0, 0) INTD PIRQB
175 PCI_BDF(4, 0, 0) INTA PIRQD
176 PCI_BDF(4, 0, 0) INTB PIRQA
177 PCI_BDF(4, 0, 0) INTC PIRQB
178 PCI_BDF(4, 0, 0) INTD PIRQC
179 >;
180 };
181
182 spi: spi {
183 #address-cells = <1>;
184 #size-cells = <0>;
185 compatible = "intel,ich9-spi";
186 spi-flash@0 {
187 #address-cells = <1>;
188 #size-cells = <1>;
189 reg = <0>;
190 compatible = "stmicro,n25q064a",
191 "spi-flash";
192 memory-map = <0xff800000 0x00800000>;
193 rw-mrc-cache {
194 label = "rw-mrc-cache";
195 reg = <0x006f0000 0x00010000>;
196 };
197 };
198 };
199
200 gpioa {
201 compatible = "intel,ich6-gpio";
202 u-boot,dm-pre-reloc;
203 reg = <0 0x20>;
204 bank-name = "A";
205 use-lvl-write-cache;
206 };
207
208 gpiob {
209 compatible = "intel,ich6-gpio";
210 u-boot,dm-pre-reloc;
211 reg = <0x20 0x20>;
212 bank-name = "B";
213 use-lvl-write-cache;
214 };
215
216 gpioc {
217 compatible = "intel,ich6-gpio";
218 u-boot,dm-pre-reloc;
219 reg = <0x40 0x20>;
220 bank-name = "C";
221 use-lvl-write-cache;
222 };
223
224 gpiod {
225 compatible = "intel,ich6-gpio";
226 u-boot,dm-pre-reloc;
227 reg = <0x60 0x20>;
228 bank-name = "D";
229 use-lvl-write-cache;
230 };
231
232 gpioe {
233 compatible = "intel,ich6-gpio";
234 u-boot,dm-pre-reloc;
235 reg = <0x80 0x20>;
236 bank-name = "E";
237 use-lvl-write-cache;
238 };
239
240 gpiof {
241 compatible = "intel,ich6-gpio";
242 u-boot,dm-pre-reloc;
243 reg = <0xA0 0x20>;
244 bank-name = "F";
245 use-lvl-write-cache;
246 };
247 };
248 };
249
250 fsp {
251 compatible = "intel,baytrail-fsp";
252 fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
253 fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
254 fsp,mrc-init-spd-addr1 = <0xa0>;
255 fsp,mrc-init-spd-addr2 = <0xa2>;
256 fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
257 fsp,enable-sdio;
258 fsp,enable-sdcard;
259 fsp,enable-hsuart0;
260 fsp,enable-hsuart1;
261 fsp,enable-spi;
262 fsp,enable-sata;
263 fsp,sata-mode = <SATA_MODE_AHCI>;
264 fsp,lpe-mode = <LPE_MODE_PCI>;
265 fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
266 fsp,enable-dma0;
267 fsp,enable-dma1;
268 fsp,enable-i2c0;
269 fsp,enable-i2c1;
270 fsp,enable-i2c2;
271 fsp,enable-i2c3;
272 fsp,enable-i2c4;
273 fsp,enable-i2c5;
274 fsp,enable-i2c6;
275 fsp,enable-pwm0;
276 fsp,enable-pwm1;
277 fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
278 fsp,aperture-size = <APERTURE_SIZE_256MB>;
279 fsp,gtt-size = <GTT_SIZE_2MB>;
280 fsp,scc-mode = <SCC_MODE_PCI>;
281 fsp,os-selection = <OS_SELECTION_LINUX>;
282 fsp,emmc45-ddr50-enabled;
283 fsp,emmc45-retune-timer-value = <8>;
284 fsp,enable-igd;
285 fsp,enable-memory-down;
286 fsp,memory-down-params {
287 compatible = "intel,baytrail-fsp-mdp";
288 fsp,dram-speed = <DRAM_SPEED_1333MTS>;
289 fsp,dram-type = <DRAM_TYPE_DDR3L>;
290 fsp,dimm-0-enable;
291 fsp,dimm-width = <DIMM_WIDTH_X16>;
292 fsp,dimm-density = <DIMM_DENSITY_8GBIT>;
293 fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
294 fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
295
296 /* These following values might need a re-visit */
297 fsp,dimm-tcl = <8>;
298 fsp,dimm-trpt-rcd = <8>;
299 fsp,dimm-twr = <8>;
300 fsp,dimm-twtr = <4>;
301 fsp,dimm-trrd = <6>;
302 fsp,dimm-trtp = <4>;
303 fsp,dimm-tfaw = <22>;
304 };
305 };
306
307 microcode {
308 update@0 {
309 #include "microcode/m0130673325.dtsi"
310 };
311 update@1 {
312 #include "microcode/m0130679907.dtsi"
313 };
314 };
315 };