board/amcc/bamboo/bamboo.h

   1 /*
   2  * (C) Copyright 2005
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*----------------------------------------------------------------------------+
  25   | FPGA registers and bit definitions
  26   +----------------------------------------------------------------------------*/
  27 /*
  28  * PowerPC 440EP Board FPGA is reached with physical address 0x80001FF0.
  29  * TLB initialization makes it correspond to logical address 0x80001FF0.
  30  * => Done init_chip.s in bootlib
  31  */
  32 #define FPGA_BASE_ADDR  0x80002000
  33
  34 /*----------------------------------------------------------------------------+
  35   | Board Jumpers Setting Register
  36   |   Board Settings provided by jumpers
  37   +----------------------------------------------------------------------------*/
  38 #define FPGA_SETTING_REG            (FPGA_BASE_ADDR+0x3)
  39 /* Boot from small flash */
  40 #define     FPGA_SET_REG_BOOT_SMALL_FLASH           0x80
  41 /* Operational Flash versus SRAM position in Memory Map */
  42 #define     FPGA_SET_REG_OP_CODE_SRAM_SEL_MASK      0x40
  43 #define      FPGA_SET_REG_OP_CODE_FLASH_ABOVE        0x40
  44 #define      FPGA_SET_REG_SRAM_ABOVE                 0x00
  45 /* Boot From NAND Flash */
  46 #define     FPGA_SET_REG_BOOT_NAND_FLASH_MASK       0x40
  47 #define     FPGA_SET_REG_BOOT_NAND_FLASH_SELECT      0x00
  48 /* On Board PCI Arbiter Select */
  49 #define     FPGA_SET_REG_PCI_EXT_ARBITER_SEL_MASK   0x10
  50 #define     FPGA_SET_REG_PCI_EXT_ARBITER_SEL        0x00
  51
  52 /*----------------------------------------------------------------------------+
  53   | Functions Selection Register 1
  54   +----------------------------------------------------------------------------*/
  55 #define FPGA_SELECTION_1_REG        (FPGA_BASE_ADDR+0x4)
  56 #define     FPGA_SEL_1_REG_PHY_MASK         0xE0
  57 #define     FPGA_SEL_1_REG_MII              0x80
  58 #define     FPGA_SEL_1_REG_RMII             0x40
  59 #define     FPGA_SEL_1_REG_SMII             0x20
  60 #define     FPGA_SEL_1_REG_USB2_DEV_SEL     0x10           /* USB2 Device Selection */
  61 #define     FPGA_SEL_1_REG_USB2_HOST_SEL    0x08           /* USB2 Host Selection */
  62 #define     FPGA_SEL_1_REG_NF_SELEC_MASK    0x07           /* NF Selection Mask */
  63 #define     FPGA_SEL_1_REG_NF0_SEL_BY_NFCS1 0x04           /* NF0 Selected by NF_CS1 */
  64 #define     FPGA_SEL_1_REG_NF1_SEL_BY_NFCS2 0x02           /* NF1 Selected by NF_CS2 */
  65 #define     FPGA_SEL_1_REG_NF1_SEL_BY_NFCS3 0x01           /* NF1 Selected by NF_CS3 */
  66
  67 /*----------------------------------------------------------------------------+
  68   | Functions Selection Register 2
  69   +----------------------------------------------------------------------------*/
  70 #define FPGA_SELECTION_2_REG        (FPGA_BASE_ADDR+0x5)
  71 #define     FPGA_SEL2_REG_IIC1_SCP_SEL_MASK 0x80           /* IIC1 / SCP Selection */
  72 #define     FPGA_SEL2_REG_SEL_FRAM          0x80           /* FRAM on IIC1 bus selected - SCP Select */
  73 #define     FPGA_SEL2_REG_SEL_SCP           0x80           /* Identical to SCP Selection */
  74 #define     FPGA_SEL2_REG_SEL_IIC1          0x00           /* IIC1 Selection - Default Value */
  75 #define     FPGA_SEL2_REG_SEL_DMA_A_B       0x40           /* DMA A & B channels selected */
  76 #define     FPGA_SEL2_REG_SEL_DMA_C_D       0x20           /* DMA C & D channels selected */
  77 #define     FPGA_SEL2_REG_DMA_EOT_TC_3_SEL  0x10           /* 0 = EOT - input to 440EP */
  78                                                            /* 1 = TC - output from 440EP */
  79 #define     FPGA_SEL2_REG_DMA_EOT_TC_2_SEL  0x08           /* 0 = EOT (input to 440EP) */
  80                                                            /* 1 = TC (output from 440EP) */
  81 #define     FPGA_SEL2_REG_SEL_GPIO_1        0x04           /* EBC_GPIO & USB2_GPIO selected */
  82 #define     FPGA_SEL2_REG_SEL_GPIO_2        0x02           /* Ether._GPIO & UART_GPIO selected */
  83 #define     FPGA_SEL2_REG_SEL_GPIO_3        0x01           /* DMA_GPIO & Trace_GPIO selected */
  84
  85 /*----------------------------------------------------------------------------+
  86   | Functions Selection Register 3
  87   +----------------------------------------------------------------------------*/
  88 #define FPGA_SELECTION_3_REG        (FPGA_BASE_ADDR+0x6)
  89 #define     FPGA_SEL3_REG_EXP_SLOT_EN               0x80    /* Expansion Slot enabled */
  90 #define     FPGA_SEL3_REG_SEL_UART_CONFIG_MASK      0x70
  91 #define     FPGA_SEL3_REG_SEL_UART_CONFIG1          0x40    /* one 8_pin UART */
  92 #define     FPGA_SEL3_REG_SEL_UART_CONFIG2          0x20    /* two 4_pin UARTs */
  93 #define     FPGA_SEL3_REG_SEL_UART_CONFIG3          0x10    /* one 4_pin & two 2_pin UARTs */
  94 #define     FPGA_SEL3_REG_SEL_UART_CONFIG4          0x08    /* four 2_pin UARTs */
  95 #define     FPGA_SEL3_REG_DTR_DSR_MODE_4_PIN_UART   0x00    /* DTR/DSR mode for 4_pin_UART */
  96 #define     FPGA_SEL3_REG_RTS_CTS_MODE_4_PIN_UART   0x04    /* RTS/CTS mode for 4_pin_UART */
  97
  98 /*----------------------------------------------------------------------------+
  99   | Soft Reset Register
 100   +----------------------------------------------------------------------------*/
 101 #define FPGA_RESET_REG              (FPGA_BASE_ADDR+0x7)
 102 #define     FPGA_RESET_REG_RESET_USB20_DEV          0x80    /* Hard Reset of the GT3200 */
 103 #define     FPGA_RESET_REG_RESET_DISPLAY            0x40    /* Hard Reset on Display Device */
 104 #define     FPGA_RESET_REG_STATUS_LED_0             0x08    /* 1 = Led On */
 105 #define     FPGA_RESET_REG_STATUS_LED_1             0x04    /* 1 = Led On */
 106 #define     FPGA_RESET_REG_STATUS_LED_2             0x02    /* 1 = Led On */
 107 #define     FPGA_RESET_REG_STATUS_LED_3             0x01    /* 1 = Led On */
 108
 109
 110 /*----------------------------------------------------------------------------+
 111 | SDR Configuration registers
 112 +----------------------------------------------------------------------------*/
 113 /* Serial Device Strap Reg 0 */
 114 #define SDR0_SDSTP0                  0x0020
 115 /* Serial Device Strap Reg 1 */
 116 #define SDR0_SDSTP1                  0x0021
 117 /* Serial Device Strap Reg 2 */
 118 #define SDR0_SDSTP2                  SDR0_STRP2
 119 /* Serial Device Strap Reg 3 */
 120 #define SDR0_SDSTP3                  SDR0_STRP3
 121
 122 #define sdr_pstrp0                   0x0040
 123
 124 #define   SDR0_SDSTP1_EBC_ROM_BS_MASK  0x00006000  /* EBC Boot Size Mask */
 125 #define   SDR0_SDSTP1_EBC_ROM_BS_32BIT 0x00004000    /* EBC 32 bits */
 126 #define   SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00002000    /* EBC 16 Bits */
 127 #define   SDR0_SDSTP1_EBC_ROM_BS_8BIT  0x00000000    /* EBC  8 Bits */
 128
 129 #define   SDR0_SDSTP1_BOOT_SEL_MASK    0x00001800   /* Boot device Selection Mask */
 130 #define   SDR0_SDSTP1_BOOT_SEL_EBC     0x00000000     /* EBC */
 131 #define   SDR0_SDSTP1_BOOT_SEL_PCI     0x00000800     /* PCI */
 132 #define   SDR0_SDSTP1_BOOT_SEL_NDFC    0x00001000     /* NDFC */
 133
 134 /* Serial Device Enabled - Addr = 0xA8 */
 135 #define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5
 136 /* Serial Device Enabled - Addr = 0xA4 */
 137 #define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7
 138
 139 /* Pin Straps Reg */
 140 #define SDR0_PSTRP0                  0x0040
 141 #define SDR0_PSTRP0_BOOTSTRAP_MASK      0xE0000000  /* Strap Bits */
 142
 143 #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000  /* Default strap settings 0 */
 144 #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000  /* Default strap settings 1 */
 145 #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000  /* Default strap settings 2 */
 146 #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000  /* Default strap settings 3 */
 147 #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000  /* Default strap settings 4 */
 148 #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000  /* Default strap settings 5 */
 149 #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000  /* Default strap settings 6 */
 150 #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000  /* Default strap settings 7 */
 151
 152 /*----------------------------------------------------------------------------+
 153 | EBC Configuration Register - EBC0_CFG
 154 +----------------------------------------------------------------------------*/
 155 /* External Bus Three-State Control */
 156 #define EBC0_CFG_EBTC_DRIVEN        0x80000000
 157 /* Device-Paced Time-out Disable */
 158 #define EBC0_CFG_PTD_ENABLED        0x00000000
 159 /* Ready Timeout Count */
 160 #define EBC0_CFG_RTC_MASK           0x38000000
 161 #define EBC0_CFG_RTC_16PERCLK       0x00000000
 162 #define EBC0_CFG_RTC_32PERCLK       0x08000000
 163 #define EBC0_CFG_RTC_64PERCLK       0x10000000
 164 #define EBC0_CFG_RTC_128PERCLK      0x18000000
 165 #define EBC0_CFG_RTC_256PERCLK      0x20000000
 166 #define EBC0_CFG_RTC_512PERCLK      0x28000000
 167 #define EBC0_CFG_RTC_1024PERCLK     0x30000000
 168 #define EBC0_CFG_RTC_2048PERCLK     0x38000000
 169 /* External Master Priority Low */
 170 #define EBC0_CFG_EMPL_LOW           0x00000000
 171 #define EBC0_CFG_EMPL_MEDIUM_LOW    0x02000000
 172 #define EBC0_CFG_EMPL_MEDIUM_HIGH   0x04000000
 173 #define EBC0_CFG_EMPL_HIGH          0x06000000
 174 /* External Master Priority High */
 175 #define EBC0_CFG_EMPH_LOW           0x00000000
 176 #define EBC0_CFG_EMPH_MEDIUM_LOW    0x00800000
 177 #define EBC0_CFG_EMPH_MEDIUM_HIGH   0x01000000
 178 #define EBC0_CFG_EMPH_HIGH          0x01800000
 179 /* Chip Select Three-State Control */
 180 #define EBC0_CFG_CSTC_DRIVEN        0x00400000
 181 /* Burst Prefetch */
 182 #define EBC0_CFG_BPF_ONEDW          0x00000000
 183 #define EBC0_CFG_BPF_TWODW          0x00100000
 184 #define EBC0_CFG_BPF_FOURDW         0x00200000
 185 /* External Master Size */
 186 #define EBC0_CFG_EMS_8BIT           0x00000000
 187 /* Power Management Enable */
 188 #define EBC0_CFG_PME_DISABLED       0x00000000
 189 #define EBC0_CFG_PME_ENABLED        0x00020000
 190 /* Power Management Timer */
 191 #define EBC0_CFG_PMT_ENCODE(n)          ((((unsigned long)(n))&0x1F)<<12)
 192
 193 /*----------------------------------------------------------------------------+
 194 | Peripheral Bank Configuration Register - EBC0_BnCR
 195 +----------------------------------------------------------------------------*/
 196 /* BAS - Base Address Select */
 197 #define EBC0_BNCR_BAS_ENCODE(n)         ((((unsigned long)(n))&0xFFF00000)<<0)
 198 /* BS - Bank Size */
 199 #define EBC0_BNCR_BS_MASK       0x000E0000
 200 #define EBC0_BNCR_BS_1MB        0x00000000
 201 #define EBC0_BNCR_BS_2MB        0x00020000
 202 #define EBC0_BNCR_BS_4MB        0x00040000
 203 #define EBC0_BNCR_BS_8MB        0x00060000
 204 #define EBC0_BNCR_BS_16MB       0x00080000
 205 #define EBC0_BNCR_BS_32MB       0x000A0000
 206 #define EBC0_BNCR_BS_64MB       0x000C0000
 207 #define EBC0_BNCR_BS_128MB      0x000E0000
 208 /* BU - Bank Usage */
 209 #define EBC0_BNCR_BU_MASK       0x00018000
 210 #define EBC0_BNCR_BU_RO             0x00008000
 211 #define EBC0_BNCR_BU_WO             0x00010000
 212 #define EBC0_BNCR_BU_RW         0x00018000
 213 /* BW - Bus Width */
 214 #define EBC0_BNCR_BW_MASK       0x00006000
 215 #define EBC0_BNCR_BW_8BIT       0x00000000
 216 #define EBC0_BNCR_BW_16BIT      0x00002000
 217 #define EBC0_BNCR_BW_32BIT      0x00004000
 218
 219 /*----------------------------------------------------------------------------+
 220 | Peripheral Bank Access Parameters - EBC0_BnAP
 221 +----------------------------------------------------------------------------*/
 222 /* Burst Mode Enable */
 223 #define EBC0_BNAP_BME_ENABLED       0x80000000
 224 #define EBC0_BNAP_BME_DISABLED      0x00000000
 225 /* Transfert Wait */
 226 #define EBC0_BNAP_TWT_ENCODE(n)     ((((unsigned long)(n))&0xFF)<<23)   /* Bits 1:8 */
 227 /* Chip Select On Timing */
 228 #define EBC0_BNAP_CSN_ENCODE(n)     ((((unsigned long)(n))&0x3)<<18)    /* Bits 12:13 */
 229 /* Output Enable On Timing */
 230 #define EBC0_BNAP_OEN_ENCODE(n)     ((((unsigned long)(n))&0x3)<<16)    /* Bits 14:15 */
 231 /* Write Back Enable On Timing */
 232 #define EBC0_BNAP_WBN_ENCODE(n)     ((((unsigned long)(n))&0x3)<<14)    /* Bits 16:17 */
 233 /* Write Back Enable Off Timing */
 234 #define EBC0_BNAP_WBF_ENCODE(n)     ((((unsigned long)(n))&0x3)<<12)    /* Bits 18:19 */
 235 /* Transfert Hold */
 236 #define EBC0_BNAP_TH_ENCODE(n)      ((((unsigned long)(n))&0x7)<<9)     /* Bits 20:22 */
 237 /* PerReady Enable */
 238 #define EBC0_BNAP_RE_ENABLED        0x00000100
 239 #define EBC0_BNAP_RE_DISABLED       0x00000000
 240 /* Sample On Ready */
 241 #define EBC0_BNAP_SOR_DELAYED       0x00000000
 242 #define EBC0_BNAP_SOR_NOT_DELAYED   0x00000080
 243 /* Byte Enable Mode */
 244 #define EBC0_BNAP_BEM_WRITEONLY     0x00000000
 245 #define EBC0_BNAP_BEM_RW            0x00000040
 246 /* Parity Enable */
 247 #define EBC0_BNAP_PEN_DISABLED      0x00000000
 248 #define EBC0_BNAP_PEN_ENABLED       0x00000020
 249
 250 /*----------------------------------------------------------------------------+
 251 | Define Boot devices
 252 +----------------------------------------------------------------------------*/
 253 /* */
 254 #define BOOT_FROM_SMALL_FLASH           0x00
 255 #define BOOT_FROM_LARGE_FLASH_OR_SRAM   0x01
 256 #define BOOT_FROM_NAND_FLASH0           0x02
 257 #define BOOT_FROM_PCI                   0x03
 258 #define BOOT_DEVICE_UNKNOWN             0x04
 259
 260
 261 #define  PVR_POWERPC_440EP_PASS1    0x42221850
 262 #define  PVR_POWERPC_440EP_PASS2    0x422218D3
 263
 264 #define TRUE 1
 265 #define FALSE 0
 266
 267 #define GPIO_GROUP_MAX      2
 268 #define GPIO_MAX            32
 269 #define GPIO_ALT1_SEL       0x40000000      /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */
 270 #define GPIO_ALT2_SEL       0x80000000      /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */
 271 #define GPIO_ALT3_SEL       0xC0000000      /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */
 272 #define GPIO_MASK           0xC0000000      /* GPIO_MASK */
 273 #define GPIO_IN_SEL         0x40000000      /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */
 274                                             /* For the other GPIO number, you must shift */
 275
 276 #define GPIO0           0
 277 #define GPIO1           1
 278
 279
 280 /*#define MAX_SELECTION_NB      CORE_NB */
 281 #define MAX_CORE_SELECT_NB      22
 282
 283 /*----------------------------------------------------------------------------+
 284   | PPC440EP GPIOs addresses.
 285   +----------------------------------------------------------------------------*/
 286 #define GPIO0_REAL       0xEF600B00
 287
 288 #define GPIO1_REAL       0xEF600C00
 289
 290 /* Offsets */
 291 #define GPIOx_OR    0x00        /* GPIO Output Register */
 292 #define GPIOx_TCR   0x04        /* GPIO Three-State Control Register */
 293 #define GPIOx_OSL   0x08        /* GPIO Output Select Register (Bits 0-31) */
 294 #define GPIOx_OSH   0x0C        /* GPIO Ouput Select Register (Bits 32-63) */
 295 #define GPIOx_TSL   0x10        /* GPIO Three-State Select Register (Bits 0-31) */
 296 #define GPIOx_TSH   0x14        /* GPIO Three-State Select Register  (Bits 32-63) */
 297 #define GPIOx_ODR   0x18        /* GPIO Open drain Register */
 298 #define GPIOx_IR    0x1C        /* GPIO Input Register */
 299 #define GPIOx_RR1   0x20        /* GPIO Receive Register 1 */
 300 #define GPIOx_RR2   0x24        /* GPIO Receive Register 2 */
 301 #define GPIOx_RR3   0x28        /* GPIO Receive Register 3 */
 302 #define GPIOx_IS1L  0x30        /* GPIO Input Select Register 1 (Bits 0-31) */
 303 #define GPIOx_IS1H  0x34        /* GPIO Input Select Register 1 (Bits 32-63) */
 304 #define GPIOx_IS2L  0x38        /* GPIO Input Select Register 2 (Bits 0-31) */
 305 #define GPIOx_IS2H  0x3C        /* GPIO Input Select Register 2 (Bits 32-63) */
 306 #define GPIOx_IS3L  0x40        /* GPIO Input Select Register 3 (Bits 0-31) */
 307 #define GPIOx_IS3H  0x44        /* GPIO Input Select Register 3 (Bits 32-63) */
 308
 309 /* GPIO0 */
 310 #define GPIO0_IS1L      (GPIO0_BASE+GPIOx_IS1L)
 311 #define GPIO0_IS1H      (GPIO0_BASE+GPIOx_IS1H)
 312 #define GPIO0_IS2L      (GPIO0_BASE+GPIOx_IS2L)
 313 #define GPIO0_IS2H      (GPIO0_BASE+GPIOx_IS2H)
 314 #define GPIO0_IS3L      (GPIO0_BASE+GPIOx_IS3L)
 315 #define GPIO0_IS3H      (GPIO0_BASE+GPIOx_IS3L)
 316
 317 /* GPIO1 */
 318 #define GPIO1_IS1L      (GPIO1_BASE+GPIOx_IS1L)
 319 #define GPIO1_IS1H      (GPIO1_BASE+GPIOx_IS1H)
 320 #define GPIO1_IS2L      (GPIO1_BASE+GPIOx_IS2L)
 321 #define GPIO1_IS2H      (GPIO1_BASE+GPIOx_IS2H)
 322 #define GPIO1_IS3L      (GPIO1_BASE+GPIOx_IS3L)
 323 #define GPIO1_IS3H      (GPIO1_BASE+GPIOx_IS3L)
 324
 325 #define GPIO_OS(x)      (x+GPIOx_OSL)    /* GPIO Output Register High or Low */
 326 #define GPIO_TS(x)      (x+GPIOx_TSL)    /* GPIO Three-state Control Reg High or Low */
 327 #define GPIO_IS1(x)     (x+GPIOx_IS1L)   /* GPIO Input register1 High or Low */
 328 #define GPIO_IS2(x)     (x+GPIOx_IS2L)   /* GPIO Input register2 High or Low */
 329 #define GPIO_IS3(x)     (x+GPIOx_IS3L)   /* GPIO Input register3 High or Low */
 330
 331
 332 /*----------------------------------------------------------------------------+
 333   |                     XX     XX
 334   |
 335   | XXXXXX   XXX XX    XXX    XXX
 336   |    XX    XX X XX    XX     XX
 337   |   XX     XX X XX    XX     XX
 338   |  XX      XX   XX    XX     XX
 339   | XXXXXX   XXX  XXX  XXXX   XXXX
 340   +----------------------------------------------------------------------------*/
 341 /*----------------------------------------------------------------------------+
 342   | Defines
 343   +----------------------------------------------------------------------------*/
 344 typedef enum zmii_config { ZMII_CONFIGURATION_UNKNOWN,
 345                            ZMII_CONFIGURATION_IS_MII,
 346                            ZMII_CONFIGURATION_IS_RMII,
 347                            ZMII_CONFIGURATION_IS_SMII
 348 } zmii_config_t;
 349
 350 /*----------------------------------------------------------------------------+
 351   | Declare Configuration values
 352   +----------------------------------------------------------------------------*/
 353 typedef enum uart_config_nb { L1, L2, L3, L4 } uart_config_nb_t;
 354 typedef enum core_selection { CORE_NOT_SELECTED, CORE_SELECTED} core_selection_t;
 355 typedef enum config_list {  IIC_CORE,
 356                             SCP_CORE,
 357                             DMA_CHANNEL_AB,
 358                             UIC_4_9,
 359                             USB2_HOST,
 360                             DMA_CHANNEL_CD,
 361                             USB2_DEVICE,
 362                             PACKET_REJ_FUNC_AVAIL,
 363                             USB1_DEVICE,
 364                             EBC_MASTER,
 365                             NAND_FLASH,
 366                             UART_CORE0,
 367                             UART_CORE1,
 368                             UART_CORE2,
 369                             UART_CORE3,
 370                             MII_SEL,
 371                             RMII_SEL,
 372                             SMII_SEL,
 373                             PACKET_REJ_FUNC_EN,
 374                             UIC_0_3,
 375                             USB1_HOST,
 376                             PCI_PATCH,
 377                             CORE_NB
 378 } core_list_t;
 379
 380 typedef enum block3_value { B3_V1,  B3_V2,  B3_V3,  B3_V4,  B3_V5,
 381                             B3_V6,  B3_V7,  B3_V8,  B3_V9,  B3_V10,
 382                             B3_V11, B3_V12, B3_V13, B3_V14, B3_V15,
 383                             B3_V16, B3_VALUE_UNKNOWN
 384 } block3_value_t;
 385
 386 typedef enum config_validity { CONFIG_IS_VALID,
 387                                CONFIG_IS_INVALID
 388 } config_validity_t;