]> git.ipfire.org Git - people/ms/u-boot.git/blob - board/amcc/kilauea/kilauea.c
rename CFG_ macros to CONFIG_SYS
[people/ms/u-boot.git] / board / amcc / kilauea / kilauea.c
1 /*
2 * (C) Copyright 2007
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24 #include <common.h>
25 #include <ppc4xx.h>
26 #include <ppc405.h>
27 #include <libfdt.h>
28 #include <fdt_support.h>
29 #include <asm/processor.h>
30 #include <asm/io.h>
31
32 #if defined(CONFIG_PCI)
33 #include <pci.h>
34 #include <asm/4xx_pcie.h>
35 #endif
36
37 DECLARE_GLOBAL_DATA_PTR;
38
39 extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
40
41 /*
42 * Board early initialization function
43 */
44 int board_early_init_f (void)
45 {
46 u32 val;
47
48 /*--------------------------------------------------------------------+
49 | Interrupt controller setup for the AMCC 405EX(r) PINE evaluation board.
50 +--------------------------------------------------------------------+
51 +---------------------------------------------------------------------+
52 |Interrupt| Source | Pol. | Sensi.| Crit. |
53 +---------+-----------------------------------+-------+-------+-------+
54 | IRQ 00 | UART0 | High | Level | Non |
55 | IRQ 01 | UART1 | High | Level | Non |
56 | IRQ 02 | IIC0 | High | Level | Non |
57 | IRQ 03 | TBD | High | Level | Non |
58 | IRQ 04 | TBD | High | Level | Non |
59 | IRQ 05 | EBM | High | Level | Non |
60 | IRQ 06 | BGI | High | Level | Non |
61 | IRQ 07 | IIC1 | Rising| Edge | Non |
62 | IRQ 08 | SPI | High | Lvl/ed| Non |
63 | IRQ 09 | External IRQ 0 - (PCI-Express) | pgm H | Pgm | Non |
64 | IRQ 10 | MAL TX EOB | High | Level | Non |
65 | IRQ 11 | MAL RX EOB | High | Level | Non |
66 | IRQ 12 | DMA Channel 0 FIFO Full | High | Level | Non |
67 | IRQ 13 | DMA Channel 0 Stat FIFO | High | Level | Non |
68 | IRQ 14 | DMA Channel 1 FIFO Full | High | Level | Non |
69 | IRQ 15 | DMA Channel 1 Stat FIFO | High | Level | Non |
70 | IRQ 16 | PCIE0 AL | high | Level | Non |
71 | IRQ 17 | PCIE0 VPD access | rising| Edge | Non |
72 | IRQ 18 | PCIE0 hot reset request | rising| Edge | Non |
73 | IRQ 19 | PCIE0 hot reset request | faling| Edge | Non |
74 | IRQ 20 | PCIE0 TCR | High | Level | Non |
75 | IRQ 21 | PCIE0 MSI level0 | High | Level | Non |
76 | IRQ 22 | PCIE0 MSI level1 | High | Level | Non |
77 | IRQ 23 | Security EIP-94 | High | Level | Non |
78 | IRQ 24 | EMAC0 interrupt | High | Level | Non |
79 | IRQ 25 | EMAC1 interrupt | High | Level | Non |
80 | IRQ 26 | PCIE0 MSI level2 | High | Level | Non |
81 | IRQ 27 | External IRQ 4 | pgm H | Pgm | Non |
82 | IRQ 28 | UIC2 Non-critical Int. | High | Level | Non |
83 | IRQ 29 | UIC2 Critical Interrupt | High | Level | Crit. |
84 | IRQ 30 | UIC1 Non-critical Int. | High | Level | Non |
85 | IRQ 31 | UIC1 Critical Interrupt | High | Level | Crit. |
86 |----------------------------------------------------------------------
87 | IRQ 32 | MAL Serr | High | Level | Non |
88 | IRQ 33 | MAL Txde | High | Level | Non |
89 | IRQ 34 | MAL Rxde | High | Level | Non |
90 | IRQ 35 | PCIE0 bus master VC0 |falling| Edge | Non |
91 | IRQ 36 | PCIE0 DCR Error | High | Level | Non |
92 | IRQ 37 | EBC | High |Lvl Edg| Non |
93 | IRQ 38 | NDFC | High | Level | Non |
94 | IRQ 39 | GPT Compare Timer 8 | Risin | Edge | Non |
95 | IRQ 40 | GPT Compare Timer 9 | Risin | Edge | Non |
96 | IRQ 41 | PCIE1 AL | high | Level | Non |
97 | IRQ 42 | PCIE1 VPD access | rising| edge | Non |
98 | IRQ 43 | PCIE1 hot reset request | rising| Edge | Non |
99 | IRQ 44 | PCIE1 hot reset request | faling| Edge | Non |
100 | IRQ 45 | PCIE1 TCR | High | Level | Non |
101 | IRQ 46 | PCIE1 bus master VC0 |falling| Edge | Non |
102 | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non |
103 | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non |
104 | IRQ 49 | Ext. IRQ 7 |pgm/Fal|pgm/Lvl| Non |
105 | IRQ 50 | Ext. IRQ 8 - |pgm (H)|pgm/Lvl| Non |
106 | IRQ 51 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non |
107 | IRQ 52 | GPT Compare Timer 5 | high | Edge | Non |
108 | IRQ 53 | GPT Compare Timer 6 | high | Edge | Non |
109 | IRQ 54 | GPT Compare Timer 7 | high | Edge | Non |
110 | IRQ 55 | Serial ROM | High | Level | Non |
111 | IRQ 56 | GPT Decrement Pulse | High | Level | Non |
112 | IRQ 57 | Ext. IRQ 2 |pgm/Fal|pgm/Lvl| Non |
113 | IRQ 58 | Ext. IRQ 5 |pgm/Fal|pgm/Lvl| Non |
114 | IRQ 59 | Ext. IRQ 6 |pgm/Fal|pgm/Lvl| Non |
115 | IRQ 60 | EMAC0 Wake-up | High | Level | Non |
116 | IRQ 61 | Ext. IRQ 1 |pgm/Fal|pgm/Lvl| Non |
117 | IRQ 62 | EMAC1 Wake-up | High | Level | Non |
118 |----------------------------------------------------------------------
119 | IRQ 64 | PE0 AL | High | Level | Non |
120 | IRQ 65 | PE0 VPD Access | Risin | Edge | Non |
121 | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non |
122 | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non |
123 | IRQ 68 | PE0 TCR | High | Level | Non |
124 | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non |
125 | IRQ 70 | PE0 DCR Error | High | Level | Non |
126 | IRQ 71 | Reserved | N/A | N/A | Non |
127 | IRQ 72 | PE1 AL | High | Level | Non |
128 | IRQ 73 | PE1 VPD Access | Risin | Edge | Non |
129 | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non |
130 | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non |
131 | IRQ 76 | PE1 TCR | High | Level | Non |
132 | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non |
133 | IRQ 78 | PE1 DCR Error | High | Level | Non |
134 | IRQ 79 | Reserved | N/A | N/A | Non |
135 | IRQ 80 | PE2 AL | High | Level | Non |
136 | IRQ 81 | PE2 VPD Access | Risin | Edge | Non |
137 | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non |
138 | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non |
139 | IRQ 84 | PE2 TCR | High | Level | Non |
140 | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non |
141 | IRQ 86 | PE2 DCR Error | High | Level | Non |
142 | IRQ 87 | Reserved | N/A | N/A | Non |
143 | IRQ 88 | External IRQ(5) | Progr | Progr | Non |
144 | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non |
145 | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non |
146 | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non |
147 | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non |
148 | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non |
149 | IRQ 94 | Reserved | N/A | N/A | Non |
150 | IRQ 95 | Reserved | N/A | N/A | Non |
151 |---------------------------------------------------------------------
152 +---------+-----------------------------------+-------+-------+------*/
153 /*--------------------------------------------------------------------+
154 | Initialise UIC registers. Clear all interrupts. Disable all
155 | interrupts.
156 | Set critical interrupt values. Set interrupt polarities. Set
157 | interrupt trigger levels. Make bit 0 High priority. Clear all
158 | interrupts again.
159 +-------------------------------------------------------------------*/
160
161 mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
162 mtdcr (uic2er, 0x00000000); /* disable all interrupts */
163 mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts */
164 mtdcr (uic2pr, 0xf7ffffff); /* Set Interrupt Polarities */
165 mtdcr (uic2tr, 0x01e1fff8); /* Set Interrupt Trigger Levels */
166 mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
167 mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
168 mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
169
170 mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts */
171 mtdcr (uic1er, 0x00000000); /* disable all interrupts */
172 mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts */
173 mtdcr (uic1pr, 0xfffac785); /* Set Interrupt Polarities */
174 mtdcr (uic1tr, 0x001d0040); /* Set Interrupt Trigger Levels */
175 mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
176 mtdcr (uic1sr, 0x00000000); /* clear all interrupts */
177 mtdcr (uic1sr, 0xffffffff); /* clear all interrupts */
178
179 mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
180 mtdcr (uic0er, 0x0000000a); /* Disable all interrupts */
181 /* Except cascade UIC0 and UIC1 */
182 mtdcr (uic0cr, 0x00000000); /* Set Critical / Non Critical interrupts */
183 mtdcr (uic0pr, 0xffbfefef); /* Set Interrupt Polarities */
184 mtdcr (uic0tr, 0x00007000); /* Set Interrupt Trigger Levels */
185 mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
186 mtdcr (uic0sr, 0x00000000); /* clear all interrupts */
187 mtdcr (uic0sr, 0xffffffff); /* clear all interrupts */
188
189 /*
190 * Note: Some cores are still in reset when the chip starts, so
191 * take them out of reset
192 */
193 mtsdr(SDR0_SRST, 0);
194
195 /* Configure 405EX for NAND usage */
196 val = SDR0_CUST0_MUX_NDFC_SEL |
197 SDR0_CUST0_NDFC_ENABLE |
198 SDR0_CUST0_NDFC_BW_8_BIT |
199 SDR0_CUST0_NRB_BUSY |
200 (0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
201 mtsdr(SDR0_CUST0, val);
202
203 /*
204 * Configure PFC (Pin Function Control) registers
205 * -> Enable USB
206 */
207 val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
208 mtsdr(SDR0_PFC1, val);
209
210 /*
211 * Configure FPGA register with PCIe reset
212 */
213 out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc4); /* assert PCIe reset */
214 mdelay(50);
215 out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc7); /* deassert PCIe reset */
216
217 return 0;
218 }
219
220 int misc_init_r(void)
221 {
222 #ifdef CONFIG_ENV_IS_IN_FLASH
223 /* Monitor protection ON by default */
224 flash_protect(FLAG_PROTECT_SET,
225 -CONFIG_SYS_MONITOR_LEN,
226 0xffffffff,
227 &flash_info[0]);
228 #endif
229
230 return 0;
231 }
232
233 static int is_405exr(void)
234 {
235 u32 pvr = get_pvr();
236
237 if (pvr & 0x00000004)
238 return 0; /* bit 2 set -> 405EX */
239
240 return 1; /* bit 2 cleared -> 405EXr */
241 }
242
243 int board_emac_count(void)
244 {
245 /*
246 * 405EXr only has one EMAC interface, 405EX has two
247 */
248 if (is_405exr())
249 return 1;
250 else
251 return 2;
252 }
253
254 static int board_pcie_count(void)
255 {
256 /*
257 * 405EXr only has one EMAC interface, 405EX has two
258 */
259 if (is_405exr())
260 return 1;
261 else
262 return 2;
263 }
264
265 int checkboard (void)
266 {
267 char *s = getenv("serial#");
268
269 if (is_405exr())
270 printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board");
271 else
272 printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");
273
274 if (s != NULL) {
275 puts(", serial# ");
276 puts(s);
277 }
278 putc('\n');
279
280 return (0);
281 }
282
283 /*************************************************************************
284 * pci_pre_init
285 *
286 * This routine is called just prior to registering the hose and gives
287 * the board the opportunity to check things. Returning a value of zero
288 * indicates that things are bad & PCI initialization should be aborted.
289 *
290 * Different boards may wish to customize the pci controller structure
291 * (add regions, override default access routines, etc) or perform
292 * certain pre-initialization actions.
293 *
294 ************************************************************************/
295 #if defined(CONFIG_PCI)
296 int pci_pre_init(struct pci_controller * hose )
297 {
298 return 0;
299 }
300 #endif /* defined(CONFIG_PCI) */
301
302 #ifdef CONFIG_PCI
303 static struct pci_controller pcie_hose[2] = {{0},{0}};
304
305 void pcie_setup_hoses(int busno)
306 {
307 struct pci_controller *hose;
308 int i, bus;
309 int ret = 0;
310 bus = busno;
311 char *env;
312 unsigned int delay;
313
314 for (i = 0; i < board_pcie_count(); i++) {
315
316 if (is_end_point(i))
317 ret = ppc4xx_init_pcie_endport(i);
318 else
319 ret = ppc4xx_init_pcie_rootport(i);
320 if (ret) {
321 printf("PCIE%d: initialization as %s failed\n", i,
322 is_end_point(i) ? "endpoint" : "root-complex");
323 continue;
324 }
325
326 hose = &pcie_hose[i];
327 hose->first_busno = bus;
328 hose->last_busno = bus;
329 hose->current_busno = bus;
330
331 /* setup mem resource */
332 pci_set_region(hose->regions + 0,
333 CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
334 CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
335 CONFIG_SYS_PCIE_MEMSIZE,
336 PCI_REGION_MEM);
337 hose->region_count = 1;
338 pci_register_hose(hose);
339
340 if (is_end_point(i)) {
341 ppc4xx_setup_pcie_endpoint(hose, i);
342 /*
343 * Reson for no scanning is endpoint can not generate
344 * upstream configuration accesses.
345 */
346 } else {
347 ppc4xx_setup_pcie_rootpoint(hose, i);
348 env = getenv ("pciscandelay");
349 if (env != NULL) {
350 delay = simple_strtoul(env, NULL, 10);
351 if (delay > 5)
352 printf("Warning, expect noticable delay before "
353 "PCIe scan due to 'pciscandelay' value!\n");
354 mdelay(delay * 1000);
355 }
356
357 /*
358 * Config access can only go down stream
359 */
360 hose->last_busno = pci_hose_scan(hose);
361 bus = hose->last_busno + 1;
362 }
363 }
364 }
365 #endif
366
367 #if defined(CONFIG_POST)
368 /*
369 * Returns 1 if keys pressed to start the power-on long-running tests
370 * Called from board_init_f().
371 */
372 int post_hotkeys_pressed(void)
373 {
374 return 0; /* No hotkeys supported */
375 }
376 #endif /* CONFIG_POST */