board/amcc/walnut/walnut.c

   1 /*
   2  * (C) Copyright 2000-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #include <common.h>
   9 #include <asm/processor.h>
  10 #include <spd_sdram.h>
  11
  12 DECLARE_GLOBAL_DATA_PTR;
  13
  14 int board_early_init_f(void)
  15 {
  16         /*-------------------------------------------------------------------------+
  17           | Interrupt controller setup for the Walnut/Sycamore board.
  18           | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
  19           |       IRQ 16    405GP internally generated; active low; level sensitive
  20           |       IRQ 17-24 RESERVED
  21           |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
  22           |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
  23           |       IRQ 27 (EXT IRQ 2) Not Used
  24           |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
  25           |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
  26           |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
  27           |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
  28           | Note for Walnut board:
  29           |       An interrupt taken for the FPGA (IRQ 25) indicates that either
  30           |       the Mouse, Keyboard, IRDA, or External Expansion caused the
  31           |       interrupt. The FPGA must be read to determine which device
  32           |       caused the interrupt. The default setting of the FPGA clears
  33           |
  34           +-------------------------------------------------------------------------*/
  35
  36         mtdcr(UIC0SR, 0xFFFFFFFF);      /* clear all ints */
  37         mtdcr(UIC0ER, 0x00000000);      /* disable all ints */
  38         mtdcr(UIC0CR, 0x00000020);      /* set all but FPGA SMI to be non-critical */
  39         mtdcr(UIC0PR, 0xFFFFFFE0);      /* set int polarities */
  40         mtdcr(UIC0TR, 0x10000000);      /* set int trigger levels */
  41         mtdcr(UIC0VCR, 0x00000001);     /* set vect base=0,INT0 highest priority */
  42         mtdcr(UIC0SR, 0xFFFFFFFF);      /* clear all ints */
  43
  44         /* set UART1 control to select CTS/RTS */
  45 #define FPGA_BRDC       0xF0300004
  46         *(volatile char *)(FPGA_BRDC) |= 0x1;
  47
  48         return 0;
  49 }
  50
  51 /*
  52  * Check Board Identity:
  53  */
  54 int checkboard(void)
  55 {
  56         char buf[64];
  57         int i = getenv_f("serial#", buf, sizeof(buf));
  58         uint pvr = get_pvr();
  59
  60         if (pvr == PVR_405GPR_RB) {
  61                 puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
  62         } else {
  63                 puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
  64         }
  65
  66         if (i > 0) {
  67                 puts(", serial# ");
  68                 puts(buf);
  69         }
  70         putc('\n');
  71
  72         return (0);
  73 }
  74
  75 /*
  76  * dram_init() reads EEPROM via I2c. EEPROM contains all of
  77  * the necessary info for SDRAM controller configuration
  78  */
  79 int dram_init(void)
  80 {
  81         gd->ram_size = spd_sdram();
  82
  83         return 0;
  84 }