]>
git.ipfire.org Git - people/ms/u-boot.git/blob - board/bf537-stamp/bf537-stamp.c
4 * Copyright (c) 2005-2007 Analog Devices Inc.
6 * (C) Copyright 2000-2004
7 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
9 * See file CREDITS for list of people who contributed to this
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
31 #include <asm/blackfin.h>
34 #include "ether_bf537.h"
35 #include <asm/mach-common/bits/bootrom.h>
38 * is_valid_ether_addr - Determine if the given Ethernet address is valid
39 * @addr: Pointer to a six-byte array containing the Ethernet address
41 * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not
42 * a multicast address, and is not FF:FF:FF:FF:FF:FF.
44 * Return true if the address is valid.
46 static inline int is_valid_ether_addr(const u8
* addr
)
48 /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to
49 * explicitly check for it here. */
50 return !is_multicast_ether_addr(addr
) && !is_zero_ether_addr(addr
);
53 DECLARE_GLOBAL_DATA_PTR
;
55 #define POST_WORD_ADDR 0xFF903FFC
59 #if (BFIN_CPU == ADSP_BF534)
60 printf("CPU: ADSP BF534 Rev.: 0.%d\n", *pCHIPID
>> 28);
61 #elif (BFIN_CPU == ADSP_BF536)
62 printf("CPU: ADSP BF536 Rev.: 0.%d\n", *pCHIPID
>> 28);
64 printf("CPU: ADSP BF537 Rev.: 0.%d\n", *pCHIPID
>> 28);
66 printf("Board: ADI BF537 stamp board\n");
67 printf(" Support: http://blackfin.uclinux.org/\n");
71 #if defined(CONFIG_BFIN_IDE)
73 void cf_outb(unsigned char val
, volatile unsigned char *addr
)
79 unsigned char cf_inb(volatile unsigned char *addr
)
81 volatile unsigned char c
;
89 void cf_insw(unsigned short *sect_buf
, unsigned short *addr
, int words
)
93 for (i
= 0; i
< words
; i
++)
94 *(sect_buf
+ i
) = *(addr
);
98 void cf_outsw(unsigned short *addr
, unsigned short *sect_buf
, int words
)
102 for (i
= 0; i
< words
; i
++)
103 *(addr
) = *(sect_buf
+ i
);
106 #endif /* CONFIG_BFIN_IDE */
108 long int initdram(int board_type
)
112 char *tmp
= getenv("baudrate");
113 brate
= simple_strtoul(tmp
, NULL
, 16);
114 printf("Serial Port initialized with Baud rate = %x\n", brate
);
115 printf("SDRAM attributes:\n");
116 printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
117 "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
119 printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE
);
120 printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE
>> 20);
122 gd
->bd
->bi_memstart
= CFG_SDRAM_BASE
;
123 gd
->bd
->bi_memsize
= CFG_MAX_RAM_SIZE
;
124 return CFG_MAX_RAM_SIZE
;
127 #if defined(CONFIG_MISC_INIT_R)
128 /* miscellaneous platform dependent initialisations */
129 int misc_init_r(void)
131 #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
133 unsigned char *pMACaddr
= (unsigned char *)0x203F0000;
134 u8 SrcAddr
[6] = { 0x02, 0x80, 0xAD, 0x20, 0x31, 0xB8 };
136 #if defined(CONFIG_CMD_NET)
137 /* The 0xFF check here is to make sure we don't use the address
138 * in flash if it's simply been erased (aka all 0xFF values) */
139 if (getenv("ethaddr") == NULL
&& is_valid_ether_addr(pMACaddr
)) {
140 sprintf(nid
, "%02x:%02x:%02x:%02x:%02x:%02x",
141 pMACaddr
[0], pMACaddr
[1],
142 pMACaddr
[2], pMACaddr
[3], pMACaddr
[4], pMACaddr
[5]);
143 setenv("ethaddr", nid
);
145 if (getenv("ethaddr")) {
146 SetupMacAddr(SrcAddr
);
149 #endif /* BFIN_BOOT_MODE == BF537_BYPASS_BOOT */
151 #if defined(CONFIG_BFIN_IDE)
152 #if defined(CONFIG_BFIN_TRUE_IDE)
153 /* Enable ATASEL when in True IDE mode */
154 printf("Using CF True IDE Mode\n");
155 cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_ENA
);
157 #elif defined(CONFIG_BFIN_CF_IDE)
158 /* Disable ATASEL when we're in Common Memory Mode */
159 printf("Using CF Common Memory Mode\n");
160 cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_DIS
);
162 #elif defined(CONFIG_BFIN_HDD_IDE)
163 printf("Using HDD IDE Mode\n");
166 #endif /* CONFIG_BFIN_IDE */
169 #endif /* CONFIG_MISC_INIT_R */
172 #if (BFIN_BOOT_MODE != BF537_BYPASS_BOOT)
173 /* Using sw10-PF5 as the hotkey */
174 int post_hotkeys_pressed(void)
179 /* Using sw10-PF5 as the hotkey */
180 int post_hotkeys_pressed(void)
184 unsigned short value
;
187 *pPORTFIO_DIR
&= ~PF5
;
188 *pPORTFIO_INEN
|= PF5
;
190 printf("########Press SW10 to enter Memory POST########: %2d ", delay
);
192 for (i
= 0; i
< 100; i
++) {
193 value
= *pPORTFIO
& PF5
;
199 printf("\b\b\b%2d ", delay
);
206 printf("Hotkey has been pressed, Enter POST . . . . . .\n");
213 #if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
214 void post_word_store(ulong a
)
216 volatile ulong
*save_addr
= (volatile ulong
*)POST_WORD_ADDR
;
220 ulong
post_word_load(void)
222 volatile ulong
*save_addr
= (volatile ulong
*)POST_WORD_ADDR
;
228 int uart_post_test(int flags
)
233 #define BLOCK_SIZE 0x10000
234 #define VERIFY_ADDR 0x2000000
235 extern int erase_block_flash(int);
236 extern int write_data(long lStart
, long lCount
, uchar
* pnData
);
237 int flash_post_test(int flags
)
239 unsigned short *pbuf
, *temp
;
244 pbuf
= (unsigned short *)VERIFY_ADDR
;
246 for (n
= FLASH_START_POST_BLOCK
; n
< FLASH_END_POST_BLOCK
; n
++) {
247 offset
= (n
- 7) * BLOCK_SIZE
;
248 printf("--------Erase block:%2d..", n
);
249 erase_block_flash(n
);
251 printf("--------Program block:%2d...", n
);
252 write_data(CFG_FLASH_BASE
+ offset
, BLOCK_SIZE
, pbuf
);
254 printf("--------Verify block:%2d...", n
);
255 for (i
= 0; i
< BLOCK_SIZE
; i
+= 2) {
256 if (*(unsigned short *)(CFG_FLASH_BASE
+ offset
+ i
) !=
268 FLASH_START_POST_BLOCK
) *
269 100 / (FLASH_END_POST_BLOCK
-
270 FLASH_START_POST_BLOCK
)));
282 /****************************************************
283 * LED1 ---- PF6 LED2 ---- PF7 *
284 * LED3 ---- PF8 LED4 ---- PF9 *
285 * LED5 ---- PF10 LED6 ---- PF11 *
286 ****************************************************/
287 int led_post_test(int flags
)
289 *pPORTF_FER
&= ~(PF6
| PF7
| PF8
| PF9
| PF10
| PF11
);
290 *pPORTFIO_DIR
|= PF6
| PF7
| PF8
| PF9
| PF10
| PF11
;
291 *pPORTFIO_INEN
&= ~(PF6
| PF7
| PF8
| PF9
| PF10
| PF11
);
292 *pPORTFIO
&= ~(PF6
| PF7
| PF8
| PF9
| PF10
| PF11
);
297 printf("\b\b\b\b\b\b\b");
301 printf("\b\b\b\b\b\b\b");
305 printf("\b\b\b\b\b\b\b");
309 printf("\b\b\b\b\b\b\b");
313 printf("\b\b\b\b\b\b\b");
316 printf("\b\b\b\b\b\b\b ");
320 /************************************************
321 * SW10 ---- PF5 SW11 ---- PF4 *
322 * SW12 ---- PF3 SW13 ---- PF2 *
323 ************************************************/
324 int button_post_test(int flags
)
327 unsigned short value
= 0;
330 *pPORTF_FER
&= ~(PF5
| PF4
| PF3
| PF2
);
331 *pPORTFIO_DIR
&= ~(PF5
| PF4
| PF3
| PF2
);
332 *pPORTFIO_INEN
|= (PF5
| PF4
| PF3
| PF2
);
334 printf("\n--------Press SW10: %2d ", delay
);
336 for (i
= 0; i
< 100; i
++) {
337 value
= *pPORTFIO
& PF5
;
343 printf("\b\b\b%2d ", delay
);
349 printf("\b\bfailed");
353 printf("\n--------Press SW11: %2d ", delay
);
355 for (i
= 0; i
< 100; i
++) {
356 value
= *pPORTFIO
& PF4
;
362 printf("\b\b\b%2d ", delay
);
368 printf("\b\bfailed");
372 printf("\n--------Press SW12: %2d ", delay
);
374 for (i
= 0; i
< 100; i
++) {
375 value
= *pPORTFIO
& PF3
;
381 printf("\b\b\b%2d ", delay
);
387 printf("\b\bfailed");
391 printf("\n--------Press SW13: %2d ", delay
);
393 for (i
= 0; i
< 100; i
++) {
394 value
= *pPORTFIO
& PF2
;
400 printf("\b\b\b%2d ", delay
);
406 printf("\b\bfailed");