board/bf537-stamp/post.c

   1 /*
   2  * BF537-STAMP POST code
   3  *
   4  * Enter bugs at http://blackfin.uclinux.org/
   5  *
   6  * Copyright (c) 2005-2009 Analog Devices Inc.
   7  *
   8  * Licensed under the GPL-2 or later.
   9  */
  10
  11 #include <common.h>
  12 #include <config.h>
  13 #include <command.h>
  14 #include <asm/blackfin.h>
  15
  16 /* Using sw10-PF5 as the hotkey */
  17 int post_hotkeys_pressed(void)
  18 {
  19         int delay = 3;
  20         int i;
  21         unsigned short value;
  22
  23         *pPORTF_FER &= ~PF5;
  24         *pPORTFIO_DIR &= ~PF5;
  25         *pPORTFIO_INEN |= PF5;
  26
  27         printf("########Press SW10 to enter Memory POST########: %2d ", delay);
  28         while (delay--) {
  29                 for (i = 0; i < 100; i++) {
  30                         value = *pPORTFIO & PF5;
  31                         if (value != 0) {
  32                                 break;
  33                         }
  34                         udelay(10000);
  35                 }
  36                 printf("\b\b\b%2d ", delay);
  37         }
  38         printf("\b\b\b 0");
  39         printf("\n");
  40         if (value == 0)
  41                 return 0;
  42         else {
  43                 printf("Hotkey has been pressed, Enter POST . . . . . .\n");
  44                 return 1;
  45         }
  46 }
  47
  48 int uart_post_test(int flags)
  49 {
  50         return 0;
  51 }
  52
  53 #define BLOCK_SIZE 0x10000
  54 #define VERIFY_ADDR 0x2000000
  55 extern int erase_block_flash(int);
  56 extern int write_data(long lStart, long lCount, uchar * pnData);
  57 int flash_post_test(int flags)
  58 {
  59         unsigned short *pbuf, *temp;
  60         int offset, n, i;
  61         int value = 0;
  62         int result = 0;
  63         printf("\n");
  64         pbuf = (unsigned short *)VERIFY_ADDR;
  65         temp = pbuf;
  66         for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
  67                 offset = (n - 7) * BLOCK_SIZE;
  68                 printf("--------Erase   block:%2d..", n);
  69                 erase_block_flash(n);
  70                 printf("OK\r");
  71                 printf("--------Program block:%2d...", n);
  72                 write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
  73                 printf("OK\r");
  74                 printf("--------Verify  block:%2d...", n);
  75                 for (i = 0; i < BLOCK_SIZE; i += 2) {
  76                         if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
  77                             *temp++) {
  78                                 value = 1;
  79                                 result = 1;
  80                         }
  81                 }
  82                 if (value)
  83                         printf("failed\n");
  84                 else
  85                         printf("OK              %3d%%\r",
  86                                (int)(
  87                                      (n + 1 -
  88                                       FLASH_START_POST_BLOCK) *
  89                                      100 / (FLASH_END_POST_BLOCK -
  90                                             FLASH_START_POST_BLOCK)));
  91
  92                 temp = pbuf;
  93                 value = 0;
  94         }
  95         printf("\n");
  96         if (result)
  97                 return -1;
  98         else
  99                 return 0;
 100 }
 101
 102 /****************************************************
 103  * LED1 ---- PF6        LED2 ---- PF7               *
 104  * LED3 ---- PF8        LED4 ---- PF9               *
 105  * LED5 ---- PF10       LED6 ---- PF11              *
 106  ****************************************************/
 107 int led_post_test(int flags)
 108 {
 109         *pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
 110         *pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11;
 111         *pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
 112         *pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
 113         udelay(1000000);
 114         printf("LED1 on");
 115         *pPORTFIO |= PF6;
 116         udelay(1000000);
 117         printf("\b\b\b\b\b\b\b");
 118         printf("LED2 on");
 119         *pPORTFIO |= PF7;
 120         udelay(1000000);
 121         printf("\b\b\b\b\b\b\b");
 122         printf("LED3 on");
 123         *pPORTFIO |= PF8;
 124         udelay(1000000);
 125         printf("\b\b\b\b\b\b\b");
 126         printf("LED4 on");
 127         *pPORTFIO |= PF9;
 128         udelay(1000000);
 129         printf("\b\b\b\b\b\b\b");
 130         printf("LED5 on");
 131         *pPORTFIO |= PF10;
 132         udelay(1000000);
 133         printf("\b\b\b\b\b\b\b");
 134         printf("lED6 on");
 135         *pPORTFIO |= PF11;
 136         printf("\b\b\b\b\b\b\b ");
 137         return 0;
 138 }
 139
 140 /************************************************
 141  *  SW10 ---- PF5       SW11 ---- PF4           *
 142  *  SW12 ---- PF3       SW13 ---- PF2           *
 143  ************************************************/
 144 int button_post_test(int flags)
 145 {
 146         int i, delay = 5;
 147         unsigned short value = 0;
 148         int result = 0;
 149
 150         *pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2);
 151         *pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2);
 152         *pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2);
 153
 154         printf("\n--------Press SW10: %2d ", delay);
 155         while (delay--) {
 156                 for (i = 0; i < 100; i++) {
 157                         value = *pPORTFIO & PF5;
 158                         if (value != 0) {
 159                                 break;
 160                         }
 161                         udelay(10000);
 162                 }
 163                 printf("\b\b\b%2d ", delay);
 164         }
 165         if (value != 0)
 166                 printf("\b\bOK");
 167         else {
 168                 result = -1;
 169                 printf("\b\bfailed");
 170         }
 171
 172         delay = 5;
 173         printf("\n--------Press SW11: %2d ", delay);
 174         while (delay--) {
 175                 for (i = 0; i < 100; i++) {
 176                         value = *pPORTFIO & PF4;
 177                         if (value != 0) {
 178                                 break;
 179                         }
 180                         udelay(10000);
 181                 }
 182                 printf("\b\b\b%2d ", delay);
 183         }
 184         if (value != 0)
 185                 printf("\b\bOK");
 186         else {
 187                 result = -1;
 188                 printf("\b\bfailed");
 189         }
 190
 191         delay = 5;
 192         printf("\n--------Press SW12: %2d ", delay);
 193         while (delay--) {
 194                 for (i = 0; i < 100; i++) {
 195                         value = *pPORTFIO & PF3;
 196                         if (value != 0) {
 197                                 break;
 198                         }
 199                         udelay(10000);
 200                 }
 201                 printf("\b\b\b%2d ", delay);
 202         }
 203         if (value != 0)
 204                 printf("\b\bOK");
 205         else {
 206                 result = -1;
 207                 printf("\b\bfailed");
 208         }
 209
 210         delay = 5;
 211         printf("\n--------Press SW13: %2d ", delay);
 212         while (delay--) {
 213                 for (i = 0; i < 100; i++) {
 214                         value = *pPORTFIO & PF2;
 215                         if (value != 0) {
 216                                 break;
 217                         }
 218                         udelay(10000);
 219                 }
 220                 printf("\b\b\b%2d ", delay);
 221         }
 222         if (value != 0)
 223                 printf("\b\bOK");
 224         else {
 225                 result = -1;
 226                 printf("\b\bfailed");
 227         }
 228         printf("\n");
 229         return result;
 230 }