board/bf609-ezkit/soft_switch.h

   1 /*
   2  * U-Boot - main board file
   3  *
   4  * Copyright (c) 2008-2011 Analog Devices Inc.
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #ifndef __BOARD_SOFT_SWITCH_H__
  10 #define __BOARD_SOFT_SWITCH_H__
  11
  12 #include <asm/soft_switch.h>
  13
  14 /* switch 0 port A */
  15 #define CAN_EN                 0x1
  16 #define CAN_STB                0x2
  17 #define CAN0_ERR_EN            0x4
  18 #define CAN0RX_EN              0x8
  19 #define CNT0UD_EN              0x10
  20 #define CNT0DG_EN              0x20
  21 #define CNT0ZM_EN              0x40
  22 #define RMII_CLK_EN            0x80
  23
  24 /* switch 0 port B */
  25 #define UART0RTS_EN            0x1
  26 #define UART0RX_EN             0x2
  27 #define UART0CTS_EN            0x4
  28 #define UART0CTS_RTS_LPBK      0x8
  29 #define UART0CTS_RST_EN        0x10
  30 #define UART0CTS_146_EN        0x20
  31 #define TEMP_IRQ_EN            0x40
  32 #define TEMP_THERM_EN          0x80
  33
  34 /* switch 1 port A */
  35 #define OVERRIDE_SMC0_LP0_BOOT 0x1
  36 #define SMC0_EPPI2_LP1_SWITCH  0x2
  37 #define SMC0_LP0_EN            0x8
  38 #define LED1_GPIO_EN           0x10
  39 #define LED2_GPIO_EN           0x20
  40 #define LED3_GPIO_EN           0x40
  41 #define LED4_GPIO_EN           0x80
  42
  43 /* switch 1 port B */
  44 #define PUSHBUTTON1_EN         0x1
  45 #define PUSHBUTTON2_EN         0x2
  46 #define SD_CD_EN               0x4
  47 #define SD_WP_EN               0x8
  48 #define SPIFLASH_CS_EN         0x10
  49 #define SPI0D2_EN              0x20
  50 #define SPI0D3_EN              0x40
  51
  52 /* switch 2 port A */
  53 #define PHYINT_EN              0x1
  54 #define PHY_PWR_DWN_INT        0x2
  55 #define PHYAD0                 0x4
  56 #define ETHERNET_EN            0x8
  57 #define WAKE_PUSHBUTTON_EN     0x10
  58 #define PD0_SPI0D2_EN          0x20
  59 #define PD1_SPI0D3_EN          0x40
  60 #define PD2_SPI0MISO_EN        0x80
  61
  62 /* switch 2 port B */
  63 #define PD3_SPI0MOSI_EN        0x1
  64 #define PD4_SPI0CK_EN          0x2
  65
  66 #ifdef CONFIG_BFIN_BOARD_VERSION_1_0
  67 #define SWITCH_ADDR     0x21
  68 #else
  69 #define SWITCH_ADDR     0x20
  70 #endif
  71
  72 #define NUM_SWITCH      3
  73 #define IODIRA          0x0
  74 #define IODIRB          0x1
  75 #define OLATA           0x14
  76 #define OLATB           0x15
  77
  78 int setup_board_switches(void);
  79
  80 #endif /* __BOARD_SOFT_SWITCH_H__ */