board/bosch/shc/board.h

   1 /*
   2  * board.h
   3  *
   4  * (C) Copyright 2016
   5  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   6  *
   7  * Based on:
   8  * TI AM335x boards information header
   9  *
  10  * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef _BOARD_H_
  16 #define _BOARD_H_
  17
  18 /* Definition to control the GPIOs (for LEDs and Reset) */
  19 #define GPIO_TO_PIN(bank, gpio) (32 * (bank) + (gpio))
  20
  21 static inline int board_is_b_sample(void)
  22 {
  23 #if defined CONFIG_B_SAMPLE
  24         return 1;
  25 #else
  26         return 0;
  27 #endif
  28 }
  29
  30 static inline int board_is_c_sample(void)
  31 {
  32 #if defined CONFIG_C_SAMPLE
  33         return 1;
  34 #else
  35         return 0;
  36 #endif
  37 }
  38
  39 static inline int board_is_c3_sample(void)
  40 {
  41 #if defined CONFIG_C3_SAMPLE
  42         return 1;
  43 #else
  44         return 0;
  45 #endif
  46 }
  47
  48 static inline int board_is_series(void)
  49 {
  50 #if defined CONFIG_SERIES
  51         return 1;
  52 #else
  53         return 0;
  54 #endif
  55 }
  56
  57 /*
  58  * Definitions for pinmuxing header and Board ID strings
  59  */
  60 #if defined CONFIG_B_SAMPLE
  61 # define BOARD_ID_STR "SHC B-Sample\n"
  62 #elif defined CONFIG_B2_SAMPLE
  63 # define BOARD_ID_STR "SHC B2-Sample\n"
  64 #elif defined CONFIG_C_SAMPLE
  65 # if defined(CONFIG_SHC_NETBOOT)
  66 #  define BOARD_ID_STR "#### NETBOOT ####\nSHC C-Sample\n"
  67 # elif defined(CONFIG_SHC_SDBOOT)
  68 #  define BOARD_ID_STR "#### SDBOOT ####\nSHC C-Sample\n"
  69 # else
  70 #  define BOARD_ID_STR "SHC C-Sample\n"
  71 # endif
  72 #elif defined CONFIG_C2_SAMPLE
  73 # if defined(CONFIG_SHC_ICT)
  74 #  define BOARD_ID_STR "#### ICT ####\nSHC C2-Sample\n"
  75 # elif defined(CONFIG_SHC_NETBOOT)
  76 #  define BOARD_ID_STR "#### NETBOOT ####\nSHC C2-Sample\n"
  77 # elif defined(CONFIG_SHC_SDBOOT)
  78 #  define BOARD_ID_STR "#### SDBOOT ####\nSHC C2-Sample\n"
  79 # else
  80 #  define BOARD_ID_STR "SHC C2-Sample\n"
  81 # endif
  82 #elif defined CONFIG_C3_SAMPLE
  83 # if defined(CONFIG_SHC_ICT)
  84 #  define BOARD_ID_STR "#### ICT ####\nSHC C3-Sample\n"
  85 # elif defined(CONFIG_SHC_NETBOOT)
  86 #  define BOARD_ID_STR "#### NETBOOT ####\nSHC C3-Sample\n"
  87 # elif defined(CONFIG_SHC_SDBOOT)
  88 #  define BOARD_ID_STR "#### SDBOOT ####\nSHC C3-Sample\n"
  89 # else
  90 #  define BOARD_ID_STR "SHC C3-Sample\n"
  91 # endif
  92 #elif defined CONFIG_SERIES
  93 # if defined(CONFIG_SHC_ICT)
  94 #  define BOARD_ID_STR "#### ICT ####\nSHC\n"
  95 # elif defined(CONFIG_SHC_NETBOOT)
  96 #  define BOARD_ID_STR "#### NETBOOT ####\nSHC\n"
  97 # elif defined(CONFIG_SHC_SDBOOT)
  98 #  define BOARD_ID_STR "#### SDBOOT ####\nSHC\n"
  99 # else
 100 #  define BOARD_ID_STR "SHC\n"
 101 # endif
 102 #else
 103 # define BOARD_ID_STR "Unknown device!\n"
 104 #endif
 105
 106 /*
 107  * Definitions for GPIO pin assignments
 108  */
 109 #if defined CONFIG_B_SAMPLE
 110
 111 # define LED_PWR_BL_GPIO   GPIO_TO_PIN(1, 17)
 112 # define LED_PWR_RD_GPIO   GPIO_TO_PIN(1, 18)
 113 # define LED_PWR_GN_GPIO   GPIO_TO_PIN(1, 19)
 114 # define LED_CONN_BL_GPIO  GPIO_TO_PIN(0, 26)
 115 # define LED_CONN_RD_GPIO  GPIO_TO_PIN(0, 22)
 116 # define LED_CONN_GN_GPIO  GPIO_TO_PIN(0, 23)
 117 # define RESET_GPIO        GPIO_TO_PIN(1, 29)
 118 # define WIFI_REGEN_GPIO   GPIO_TO_PIN(1, 16)
 119 # define WIFI_RST_GPIO     GPIO_TO_PIN(0, 27)
 120 # define ZIGBEE_RST_GPIO   GPIO_TO_PIN(3, 18)
 121 # define BIDCOS_RST_GPIO   GPIO_TO_PIN(0, 12)
 122 # define ENOC_RST_GPIO     GPIO_TO_PIN(1, 22)
 123
 124 #else
 125
 126 # define LED_PWR_BL_GPIO   GPIO_TO_PIN(0, 22)
 127 # define LED_PWR_RD_GPIO   GPIO_TO_PIN(0, 23)
 128 # define LED_LAN_BL_GPIO   GPIO_TO_PIN(1, 17)
 129 # define LED_LAN_RD_GPIO   GPIO_TO_PIN(0, 26)
 130 # define LED_CLOUD_BL_GPIO GPIO_TO_PIN(1, 18)
 131 # define LED_CLOUD_RD_GPIO GPIO_TO_PIN(2, 2)
 132 # define LED_PWM_GPIO      GPIO_TO_PIN(1, 19)
 133 # define RESET_GPIO        GPIO_TO_PIN(1, 29)
 134 # define WIFI_REGEN_GPIO   GPIO_TO_PIN(1, 16)
 135 # define WIFI_RST_GPIO     GPIO_TO_PIN(0, 27)
 136 # define ZIGBEE_RST_GPIO   GPIO_TO_PIN(3, 18)
 137 # define BIDCOS_RST_GPIO   GPIO_TO_PIN(1, 24)
 138 # define Z_WAVE_RST_GPIO   GPIO_TO_PIN(1, 21)
 139 # define ENOC_RST_GPIO     GPIO_TO_PIN(1, 22)
 140
 141 #endif
 142
 143 #define BACK_BUTTON_GPIO    GPIO_TO_PIN(1, 29)
 144 #define FRONT_BUTTON_GPIO   GPIO_TO_PIN(1, 25)
 145
 146 /* Reset is on GPIO pin 29 of GPIO bank 1 */
 147 #define RESET_MASK      (0x1 << 29)
 148
 149 #define HDR_MAGIC       0x43485342
 150 #define HDR_ETH_ALEN    6
 151 #define HDR_NAME_LEN    8
 152 #define HDR_REV_LEN     8
 153 #define HDR_SER_LEN     16
 154 #define HDR_ROOT_LEN    12
 155 #define HDR_FATC_LEN    12
 156
 157 /*
 158 * SHC parameters held in On-Board I²C EEPROM device.
 159 *
 160 * Header Format
 161 *
 162 *  Name     Size   Contents
 163 *-------------------------------------------------------------
 164 *  Magic     4     0x42 0x53 0x48 0x43  [BSHC]
 165 *
 166 *  Version   2     0x0100 for v1.0
 167 *
 168 *  Lenght    2     The length of the complete structure, not only this header
 169 *
 170 *  Eth-MAC   6     Ethernet MAC Address
 171 *                  SHC Pool: 7C:AC:B2:00:10:01 - TBD
 172 *
 173 *  --- Further values follow, not important for Bootloader ---
 174 */
 175
 176 struct  shc_eeprom {
 177         u32  magic;
 178         u16  version;
 179         u16  lenght;
 180         uint8_t mac_addr[HDR_ETH_ALEN];
 181 };
 182
 183 void enable_uart0_pin_mux(void);
 184 void enable_shc_board_pin_mux(void);
 185 void enable_shc_board_pwm_pin_mux(void);
 186
 187 #endif