]>
git.ipfire.org Git - people/ms/u-boot.git/blob - board/esd/cpciiser4/cpciiser4.c
3 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
5 * SPDX-License-Identifier: GPL-2.0+
10 #include <asm/processor.h>
13 DECLARE_GLOBAL_DATA_PTR
;
15 extern void lxt971_no_sleep(void);
18 /* ------------------------------------------------------------------------- */
28 /* fpga configuration data - generated by bin2cc */
29 const unsigned char fpgadata
[] = {
34 * include common fpga code (for esd boards)
36 #include "../common/fpga.c"
39 int board_early_init_f (void)
45 /* set up serial port with default baudrate */
47 gd
->baudrate
= CONFIG_BAUDRATE
;
55 status
= fpga_boot ((unsigned char *) fpgadata
, sizeof (fpgadata
));
57 /* booting FPGA failed */
59 /* set up serial port with default baudrate */
61 gd
->baudrate
= CONFIG_BAUDRATE
;
65 printf ("\nFPGA: Booting failed ");
67 case ERROR_FPGA_PRG_INIT_LOW
:
68 printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
70 case ERROR_FPGA_PRG_INIT_HIGH
:
71 printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
73 case ERROR_FPGA_PRG_DONE
:
74 printf ("(Timeout: DONE not high after programming FPGA)\n ");
78 /* display infos on fpgaimage */
80 for (i
= 0; i
< 4; i
++) {
81 len
= fpgadata
[index
];
82 printf ("FPGA: %s\n", &(fpgadata
[index
+ 1]));
87 for (i
= 20; i
> 0; i
--) {
88 printf ("Rebooting in %2d seconds \r", i
);
89 for (index
= 0; index
< 1000; index
++)
93 do_reset (NULL
, 0, 0, NULL
);
97 * Init FPGA via RESET (read access on CS3)
99 in_8((void *)0xf0200000);
102 * IRQ 0-15 405GP internally generated; active high; level sensitive
103 * IRQ 16 405GP internally generated; active low; level sensitive
105 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
106 * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
107 * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
108 * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
109 * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
110 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
111 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
113 mtdcr (UIC0SR
, 0xFFFFFFFF); /* clear all ints */
114 mtdcr (UIC0ER
, 0x00000000); /* disable all ints */
115 mtdcr (UIC0CR
, 0x00000000); /* set all to be non-critical */
116 /* mtdcr(UIC0PR, 0xFFFFFF81); / set int polarities */
117 mtdcr (UIC0PR
, 0xFFFFFF80); /* set int polarities */
118 mtdcr (UIC0TR
, 0x10000000); /* set int trigger levels */
119 mtdcr (UIC0VCR
, 0x00000001); /* set vect base=0,INT0 highest priority */
120 mtdcr (UIC0SR
, 0xFFFFFFFF); /* clear all ints */
126 /* ------------------------------------------------------------------------- */
129 * Check Board Identity:
132 int checkboard (void)
137 int i
= getenv_f("serial#", str
, sizeof (str
));
142 puts ("### No HW ID - assuming AR405");
149 /* display infos on fpgaimage */
151 for (i
= 0; i
< 4; i
++) {
152 len
= fpgadata
[index
];
153 printf ("%s ", &(fpgadata
[index
+ 1]));
160 * Disable sleep mode in LXT971