]> git.ipfire.org Git - people/ms/u-boot.git/blob - board/freescale/bsc9131rdb/bsc9131rdb.c
apalis_t30/tk1, colibri_t20/t30: fix i2c bus frequencies
[people/ms/u-boot.git] / board / freescale / bsc9131rdb / bsc9131rdb.c
1 /*
2 * Copyright 2011-2012 Freescale Semiconductor, Inc.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7 #include <common.h>
8 #include <asm/processor.h>
9 #include <asm/mmu.h>
10 #include <asm/cache.h>
11 #include <asm/immap_85xx.h>
12 #include <asm/io.h>
13 #include <miiphy.h>
14 #include <libfdt.h>
15 #include <fdt_support.h>
16 #include <fsl_mdio.h>
17 #include <tsec.h>
18 #include <jffs2/load_kernel.h>
19 #include <mtd_node.h>
20 #include <flash.h>
21 #include <netdev.h>
22
23
24 DECLARE_GLOBAL_DATA_PTR;
25
26 int board_early_init_f(void)
27 {
28 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
29
30 clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_CTS_B0_GPIO42);
31 setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS);
32
33 clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_RTS_B0_GPIO43);
34 setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_RTS_B0_DSP_TCK |
35 MPC85xx_PMUXCR2_UART_CTS_B1_SIM_PD);
36 setbits_be32(&gur->halt_req_mask, HALTED_TO_HALT_REQ_MASK_0);
37 clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_IFC_AD_GPIO_MASK |
38 MPC85xx_PMUXCR_IFC_AD17_GPO_MASK,
39 MPC85xx_PMUXCR_IFC_AD_GPIO |
40 MPC85xx_PMUXCR_IFC_AD17_GPO | MPC85xx_PMUXCR_SDHC_USIM);
41
42 return 0;
43 }
44
45 int checkboard(void)
46 {
47 struct cpu_type *cpu;
48
49 cpu = gd->arch.cpu;
50 printf("Board: %sRDB\n", cpu->name);
51
52 return 0;
53 }
54
55 #if defined(CONFIG_OF_BOARD_SETUP)
56 #ifdef CONFIG_FDT_FIXUP_PARTITIONS
57 struct node_info nodes[] = {
58 { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, },
59 };
60 #endif
61 int ft_board_setup(void *blob, bd_t *bd)
62 {
63 phys_addr_t base;
64 phys_size_t size;
65
66 ft_cpu_setup(blob, bd);
67
68 base = getenv_bootm_low();
69 size = getenv_bootm_size();
70
71 fdt_fixup_memory(blob, (u64)base, (u64)size);
72 #ifdef CONFIG_FDT_FIXUP_PARTITIONS
73 fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
74 #endif
75
76 fsl_fdt_fixup_dr_usb(blob, bd);
77
78 return 0;
79 }
80 #endif