board/freescale/bsc9132qds/tlb.c

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <asm/mmu.h>
   9
  10 struct fsl_e_tlb_entry tlb_table[] = {
  11         /* TLB 0 - for temp stack in cache */
  12         SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
  13                         MAS3_SX|MAS3_SW|MAS3_SR, 0,
  14                         0, 0, BOOKE_PAGESZ_4K, 0),
  15         SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
  16                         CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
  17                         MAS3_SX|MAS3_SW|MAS3_SR, 0,
  18                         0, 0, BOOKE_PAGESZ_4K, 0),
  19         SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
  20                         CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
  21                         MAS3_SX|MAS3_SW|MAS3_SR, 0,
  22                         0, 0, BOOKE_PAGESZ_4K, 0),
  23         SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
  24                         CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
  25                         MAS3_SX|MAS3_SW|MAS3_SR, 0,
  26                         0, 0, BOOKE_PAGESZ_4K, 0),
  27
  28         /* TLB 1 */
  29         /* *I*** - Covers boot page */
  30         SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
  31                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  32                       0, 0, BOOKE_PAGESZ_4K, 1),
  33 #ifdef CONFIG_SPL_NAND_BOOT
  34         SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
  35                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  36                       0, 10, BOOKE_PAGESZ_4K, 1),
  37 #endif
  38
  39         /* *I*G* - CCSRBAR (PA) */
  40         SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
  41                         MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  42                         0, 1, BOOKE_PAGESZ_1M, 1),
  43
  44         /* CCSRBAR (DSP) */
  45         SET_TLB_ENTRY(1, CONFIG_SYS_FSL_DSP_CCSRBAR,
  46                       CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, MAS3_SW|MAS3_SR,
  47                       MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_1M, 1),
  48
  49 #ifndef CONFIG_SPL_BUILD
  50         SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
  51                         MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
  52                         0, 3, BOOKE_PAGESZ_64M, 1),
  53
  54         SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x4000000,
  55                         CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
  56                         MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
  57                         0, 4, BOOKE_PAGESZ_64M, 1),
  58
  59 #ifdef CONFIG_PCI
  60         /* *I*G* - PCI */
  61         SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
  62                         MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  63                         0, 6, BOOKE_PAGESZ_256M, 1),
  64
  65         /* *I*G* - PCI I/O */
  66         SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
  67                         MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  68                         0, 7, BOOKE_PAGESZ_64K, 1),
  69 #endif
  70 #endif
  71
  72 #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
  73         SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
  74                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
  75                       0, 8, BOOKE_PAGESZ_1G, 1),
  76 #endif
  77
  78 #ifdef CONFIG_SYS_FPGA_BASE
  79                 /* *I*G - Board FPGA  */
  80         SET_TLB_ENTRY(1, CONFIG_SYS_FPGA_BASE, CONFIG_SYS_FPGA_BASE_PHYS,
  81                         MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  82                         0, 9, BOOKE_PAGESZ_256K, 1),
  83 #endif
  84
  85 #ifdef CONFIG_SYS_NAND_BASE_PHYS
  86         SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
  87                         MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  88                         0, 5, BOOKE_PAGESZ_1M, 1),
  89 #endif
  90 };
  91
  92 int num_tlb_entries = ARRAY_SIZE(tlb_table);