board/freescale/ls1088a/README

   1 Overview
   2 --------
   3 The LS1088A Reference Design (RDB) is a high-performance computing,
   4 evaluation, and development platform that supports ARM SoC LS1088A and its
   5 derivatives.
   6
   7
   8 LS1088A SoC Overview
   9 --------------------------------------
  10 Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
  11
  12 RDB Default Switch Settings (1: ON; 0: OFF)
  13 -------------------------------------------
  14
  15 For QSPI Boot
  16 SW1 0011 0001
  17 SW2 x100 0000
  18 SW3 1111 0010
  19 SW4 1001 0011
  20 SW5 1111 0000
  21
  22 For SD Boot
  23 SW1 0010 0000
  24 SW2 0100 0000
  25 SW3 1111 0010
  26 SW4 1001 0011
  27 SW5 1111 0000
  28
  29 For eMMC Boot
  30 SW1 0010 0000
  31 SW2 1100 0000
  32 SW3 1111 0010
  33 SW4 1001 0011
  34 SW5 1111 0000
  35
  36 Alternately you can use this command to switch from QSPI to SD
  37
  38 => i2c mw 66 0x60 0x20; i2c mw 66 10 10;i2c mw 66 10 21
  39
  40  LS1088ARDB board Overview
  41  -------------------------
  42  - SERDES Connections, 16 lanes supporting:
  43       - PCI Express - 3.0
  44       - SATA 3.0
  45       - XFI
  46       - QSGMII
  47  - DDR Controller
  48      - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four
  49        chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default
  50        with FSL refernce software is 2100MT/s
  51  - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB
  52  - IFC/Local Bus
  53     - One 2 GB NAND flash with ECC support, not as boot source
  54     - CPLD of size 2K
  55  - USB 3.0
  56     - Two high speed USB 3.0 ports
  57     - First USB 3.0 port configured as Host with Type-A connector
  58     - Second USB 3.0 port configured as OTG with micro-AB connector
  59  - SDHC/eMMC
  60     - SDHC slot and onboard eMMC are muxed together
  61  - 4 I2C controllers
  62  - Two SATA onboard connectors
  63  - 2 UART
  64  - JTAG support
  65  - QSPI emulator support
  66  - TDM riser support
  67
  68 QDS Default Switch Settings (1: ON; 0: OFF)
  69 -------------------------------------------
  70
  71 For 16b IFC-NOR
  72 SW1 0001 0010
  73 SW2 x110 1111
  74
  75 For QSPI Boot
  76 SW1 0011 0001
  77 SW2 0110 1111
  78
  79 For SD Boot
  80 SW1 0010 0000
  81 SW2 0110 1111
  82
  83 For eMMC Boot
  84 SW1 0010 0000
  85 SW2 1110 1111
  86
  87 For I2C (ext. addr.)
  88 SW1 0010 0100
  89 SW2 1110 1111
  90
  91 SW3 to SW12 are identical for all boot source
  92
  93 SW3 0010 0100
  94 SW4 0010 0000
  95 SW5 1110 0111
  96 SW6 1110 1000
  97 SW7 0001 1101
  98 SW8 0000 1101
  99 SW9 1100 1010
 100 SW10 1110 1000
 101 SW11 1111 0100
 102 SW12 1111 1111
 103
 104  LS1088AQDS board Overview
 105  -------------------------
 106  - SERDES Connections, 16 lanes supporting:
 107       - PCI Express - 3.0
 108       - SATA 3.0
 109       - 2 XFI
 110       - QSGMII, SGMII with help for Riser card
 111       - 2 RGMII
 112       - 5 slot for Riser card or PCIe NIC
 113  - DDR Controller
 114      - One ports of 72-bits (8-bits ECC, 64-bits DATA) DDR4. Each port supports four
 115        chip-selects on one DIMM connector. Support is up to 2133MT/s, Although MAX default
 116        with FSL refernce software is 2100MT/s
 117  - 2 QSPI-NOR Spansion(S25FS512SDSMFI011) flash of size 64MB
 118  - IFC/Local Bus
 119     - One 2 GB NAND flash with ECC support, not as boot source
 120     - CPLD of size 2K
 121  - USB 3.0
 122     - Two high speed USB 3.0 ports
 123     - First USB 3.0 port configured as Host with Type-A connector
 124     - Second USB 3.0 port configured as OTG with micro-AB connector
 125  - SDHC/eMMC
 126     - SDHC/eMMC slot via adaptor
 127  - 4 I2C controllers
 128  - Two SATA onboard connectors
 129  - 2 UART
 130  - JTAG support
 131  - DSPI
 132  - PROMJET support
 133  - QSPI emulator support
 134  - TDM riser support
 135
 136 QSPI flash memory map valid for both QDS and RDB
 137   Image                               Flash Offset
 138  RCW+PBI                             0x00000000
 139  Boot firmware (U-Boot)              0x00100000
 140  Boot firmware Environment           0x00300000
 141  PPA firmware                        0x00400000
 142  DPAA2 MC                            0x00A00000
 143  DPAA2 DPL                           0x00D00000
 144  DPAA2 DPC                           0x00E00000
 145  Kernel.itb                          0x01000000