board/freescale/t208xrdb/tlb.c

   1 /*
   2  * Copyright 2008-2014 Freescale Semiconductor, Inc.
   3  *
   4  * (C) Copyright 2000
   5  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #include <common.h>
  11 #include <asm/mmu.h>
  12
  13 struct fsl_e_tlb_entry tlb_table[] = {
  14         /* TLB 0 - for temp stack in cache */
  15         SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
  16                       CONFIG_SYS_INIT_RAM_ADDR_PHYS,
  17                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
  18                       0, 0, BOOKE_PAGESZ_4K, 0),
  19         SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
  20                       CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
  21                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
  22                       0, 0, BOOKE_PAGESZ_4K, 0),
  23         SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
  24                       CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
  25                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
  26                       0, 0, BOOKE_PAGESZ_4K, 0),
  27         SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
  28                       CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
  29                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
  30                       0, 0, BOOKE_PAGESZ_4K, 0),
  31
  32         /* TLB 1 */
  33         /* *I*** - Covers boot page */
  34 #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
  35         /*
  36          * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
  37          * SRAM is at 0xfff00000, it covered the 0xfffff000.
  38          */
  39         SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
  40                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  41                       0, 0, BOOKE_PAGESZ_1M, 1),
  42 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
  43         /*
  44          * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the
  45          * space is at 0xfff00000, it covered the 0xfffff000.
  46          */
  47         SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR,
  48                       CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS,
  49                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
  50                       0, 0, BOOKE_PAGESZ_1M, 1),
  51 #else
  52         SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
  53                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  54                       0, 0, BOOKE_PAGESZ_4K, 1),
  55 #endif
  56
  57         /* *I*G* - CCSRBAR */
  58         SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
  59                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  60                       0, 1, BOOKE_PAGESZ_16M, 1),
  61
  62         /* *I*G* - Flash, localbus */
  63         /* This will be changed to *I*G* after relocation to RAM. */
  64         SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
  65                       MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
  66                       0, 2, BOOKE_PAGESZ_256M, 1),
  67
  68 #ifndef CONFIG_SPL_BUILD
  69         /* *I*G* - PCIe 1, 0x80000000 */
  70         SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
  71                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  72                       0, 3, BOOKE_PAGESZ_512M, 1),
  73
  74         /* *I*G* - PCIe 2, 0xa0000000 */
  75         SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_VIRT, CONFIG_SYS_PCIE2_MEM_PHYS,
  76                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  77                       0, 4, BOOKE_PAGESZ_256M, 1),
  78
  79         /* *I*G* - PCIe 3, 0xb0000000 */
  80         SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
  81                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  82                       0, 5, BOOKE_PAGESZ_256M, 1),
  83
  84
  85         /* *I*G* - PCIe 4, 0xc0000000 */
  86         SET_TLB_ENTRY(1, CONFIG_SYS_PCIE4_MEM_VIRT, CONFIG_SYS_PCIE4_MEM_PHYS,
  87                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  88                       0, 6, BOOKE_PAGESZ_256M, 1),
  89
  90         /* *I*G* - PCI I/O */
  91         SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
  92                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  93                       0, 7, BOOKE_PAGESZ_256K, 1),
  94
  95         /* Bman/Qman */
  96 #ifdef CONFIG_SYS_BMAN_MEM_PHYS
  97         SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
  98                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
  99                       0, 9, BOOKE_PAGESZ_16M, 1),
 100         SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
 101                       CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
 102                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 103                       0, 10, BOOKE_PAGESZ_16M, 1),
 104 #endif
 105 #ifdef CONFIG_SYS_QMAN_MEM_PHYS
 106         SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
 107                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
 108                       0, 11, BOOKE_PAGESZ_16M, 1),
 109         SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
 110                       CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
 111                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 112                       0, 12, BOOKE_PAGESZ_16M, 1),
 113 #endif
 114 #endif
 115 #ifdef CONFIG_SYS_DCSRBAR_PHYS
 116         SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
 117                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 118                       0, 13, BOOKE_PAGESZ_32M, 1),
 119 #endif
 120 #ifdef CONFIG_SYS_NAND_BASE
 121         /*
 122          * *I*G - NAND
 123          * entry 14 and 15 has been used hard coded, they will be disabled
 124          * in cpu_init_f, so we use entry 16 for nand.
 125          */
 126         SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
 127                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 128                       0, 16, BOOKE_PAGESZ_64K, 1),
 129 #endif
 130 #ifdef CONFIG_SYS_CPLD_BASE
 131         SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
 132                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 133                       0, 17, BOOKE_PAGESZ_4K, 1),
 134 #endif
 135 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 136         /*
 137          * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for
 138          * fetching ucode and ENV from master
 139          */
 140         SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR,
 141                       CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS,
 142                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
 143                       0, 18, BOOKE_PAGESZ_1M, 1),
 144 #endif
 145 #if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
 146         SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 147                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
 148                       0, 19, BOOKE_PAGESZ_2G, 1)
 149 #endif
 150
 151 };
 152
 153 int num_tlb_entries = ARRAY_SIZE(tlb_table);