3 * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
5 * Based on board/amcc/canyonlands/canyonlands.c
7 * Stefan Roese, DENX Software Engineering, sr@denx.de.
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28 #include <fdt_support.h>
30 #include <asm/processor.h>
33 #include <asm/4xx_pcie.h>
36 extern flash_info_t flash_info
[CONFIG_SYS_MAX_FLASH_BANKS
];
38 DECLARE_GLOBAL_DATA_PTR
;
40 #define CONFIG_SYS_BCSR3_PCIE 0x10
42 int board_early_init_f(void)
45 * Setup the interrupt controller polarities, triggers, etc.
47 mtdcr(UIC0SR
, 0xffffffff); /* clear all */
48 mtdcr(UIC0ER
, 0x00000000); /* disable all */
49 mtdcr(UIC0CR
, 0x00000005); /* ATI & UIC1 crit are critical */
50 mtdcr(UIC0PR
, 0xffffffff); /* per ref-board manual */
51 mtdcr(UIC0TR
, 0x00000000); /* per ref-board manual */
52 mtdcr(UIC0VR
, 0x00000000); /* int31 highest, base=0x000 */
53 mtdcr(UIC0SR
, 0xffffffff); /* clear all */
55 mtdcr(UIC1SR
, 0xffffffff); /* clear all */
56 mtdcr(UIC1ER
, 0x00000000); /* disable all */
57 mtdcr(UIC1CR
, 0x00000000); /* all non-critical */
58 mtdcr(UIC1PR
, 0xffffffff); /* per ref-board manual */
59 mtdcr(UIC1TR
, 0x00000000); /* per ref-board manual */
60 mtdcr(UIC1VR
, 0x00000000); /* int31 highest, base=0x000 */
61 mtdcr(UIC1SR
, 0xffffffff); /* clear all */
63 mtdcr(UIC2SR
, 0xffffffff); /* clear all */
64 mtdcr(UIC2ER
, 0x00000000); /* disable all */
65 mtdcr(UIC2CR
, 0x00000000); /* all non-critical */
66 mtdcr(UIC2PR
, 0xffffffff); /* per ref-board manual */
67 mtdcr(UIC2TR
, 0x00000000); /* per ref-board manual */
68 mtdcr(UIC2VR
, 0x00000000); /* int31 highest, base=0x000 */
69 mtdcr(UIC2SR
, 0xffffffff); /* clear all */
71 mtdcr(UIC3SR
, 0xffffffff); /* clear all */
72 mtdcr(UIC3ER
, 0x00000000); /* disable all */
73 mtdcr(UIC3CR
, 0x00000000); /* all non-critical */
74 mtdcr(UIC3PR
, 0xffffffff); /* per ref-board manual */
75 mtdcr(UIC3TR
, 0x00000000); /* per ref-board manual */
76 mtdcr(UIC3VR
, 0x00000000); /* int31 highest, base=0x000 */
77 mtdcr(UIC3SR
, 0xffffffff); /* clear all */
80 * Configure PFC (Pin Function Control) registers
84 mtsdr(SDR0_PFC0
, 0x00007fff);
85 mtsdr(SDR0_PFC1
, 0x00040000);
87 /* Enable PCI host functionality in SDR0_PCI0 */
88 mtsdr(SDR0_PCI0
, 0xe0000000);
90 mtsdr(SDR0_SRST1
, 0); /* Pull AHB out of reset default=1 */
92 /* Setup PLB4-AHB bridge based on the system address map */
93 mtdcr(AHB_TOP
, 0x8000004B);
94 mtdcr(AHB_BOT
, 0x8000004B);
97 * Configure USB-STP pins as alternate and not GPIO
98 * It seems to be neccessary to configure the STP pins as GPIO
99 * input at powerup (perhaps while USB reset is asserted). So
100 * we configure those pins to their "real" function now.
102 gpio_config(16, GPIO_OUT
, GPIO_ALT1
, GPIO_OUT_1
);
103 gpio_config(19, GPIO_OUT
, GPIO_ALT1
, GPIO_OUT_1
);
105 /* Trigger board component reset */
106 out_le16((void *)CONFIG_SYS_IO_BASE
, 0xffff);
107 out_le16((void *)CONFIG_SYS_IO_BASE
+ 0x100, 0xffff);
109 out_le16((void *)CONFIG_SYS_IO_BASE
, 0xffbf);
110 out_le16((void *)CONFIG_SYS_IO_BASE
+ 0x100, 0xffbf);
112 out_le16((void *)CONFIG_SYS_IO_BASE
, 0xffff);
113 out_le16((void *)CONFIG_SYS_IO_BASE
+ 0x100, 0xffff);
118 int get_cpu_num(void)
120 int cpu
= NA_OR_UNKNOWN_CPU
;
127 char *s
= getenv("serial#");
129 #ifdef CONFIG_DEVCONCENTER
130 printf("Board: DevCon-Center");
132 printf("Board: Intip");
144 int board_early_init_r(void)
147 * CompactCenter has 64MBytes, DevCon-Center 128MBytes of NOR FLASH
148 * (Spansion 29GL512), but the boot EBC mapping only supports a maximum
149 * of 16MBytes (4.ff00.0000 - 4.ffff.ffff).
150 * To solve this problem, the FLASH has to get remapped to another
151 * EBC address which accepts bigger regions:
153 * 0xfn00.0000 -> 4.cn00.0000
156 u32 bxcr_bw
= (CONFIG_SYS_FLASH_SIZE
== 128 << 20) ?
157 EBC_BXCR_BS_128MB
: EBC_BXCR_BS_64MB
;
159 /* Remap the NOR FLASH to 0xcn00.0000 ... 0xcfff.ffff */
160 mtebc(PB0CR
, CONFIG_SYS_FLASH_BASE_PHYS_L
163 | EBC_BXCR_BW_16BIT
);
165 /* Remove TLB entry of boot EBC mapping */
166 remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR
, 16 << 20);
168 /* Add TLB entry for 0xfn00.0000 -> 0x4.cn00.0000 */
169 program_tlb(CONFIG_SYS_FLASH_BASE_PHYS
, CONFIG_SYS_FLASH_BASE
,
170 CONFIG_SYS_FLASH_SIZE
, TLB_WORD2_I_ENABLE
);
173 * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
174 * 0xfc00.0000 is possible
178 * Clear potential errors resulting from auto-calibration.
179 * If not done, then we could get an interrupt later on when
180 * exceptions are enabled.
182 set_mcsr(get_mcsr());
187 int misc_init_r(void)
193 * Set EMAC mode/configuration (GMII, SGMII, RGMII...).
194 * This is board specific, so let's do it here.
196 mfsdr(SDR0_ETH_CFG
, eth_cfg
);
197 /* disable SGMII mode */
198 eth_cfg
&= ~(SDR0_ETH_CFG_SGMII2_ENABLE
|
199 SDR0_ETH_CFG_SGMII1_ENABLE
|
200 SDR0_ETH_CFG_SGMII0_ENABLE
);
201 /* Set the for 2 RGMII mode */
202 /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
203 eth_cfg
&= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL
;
204 eth_cfg
|= SDR0_ETH_CFG_GMC1_BRIDGE_SEL
;
205 mtsdr(SDR0_ETH_CFG
, eth_cfg
);
208 * The AHB Bridge core is held in reset after power-on or reset
211 mfsdr(SDR0_SRST1
, sdr0_srst1
);
212 sdr0_srst1
&= ~SDR0_SRST1_AHB
;
213 mtsdr(SDR0_SRST1
, sdr0_srst1
);
218 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
219 extern void __ft_board_setup(void *blob
, bd_t
*bd
);
221 void ft_board_setup(void *blob
, bd_t
*bd
)
223 __ft_board_setup(blob
, bd
);
225 fdt_find_and_setprop(blob
, "/plb/pciex@d00000000", "status",
226 "disabled", sizeof("disabled"), 1);
228 fdt_find_and_setprop(blob
, "/plb/sata@bffd1000", "status",
229 "disabled", sizeof("disabled"), 1);
231 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */