board/inka4x0/inka4x0.c

   1 /*
   2  * (C) Copyright 2003-2004
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * (C) Copyright 2004
   6  * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
   7  *
   8  * (C) Copyright 2004
   9  * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
  10  *
  11  * See file CREDITS for list of people who contributed to this
  12  * project.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  27  * MA 02111-1307 USA
  28  */
  29
  30 #include <common.h>
  31 #include <mpc5xxx.h>
  32 #include <pci.h>
  33
  34 #if defined(CONFIG_DDR_MT46V16M16)
  35 #include "mt46v16m16-75.h"
  36 #elif defined(CONFIG_SDR_MT48LC16M16A2)
  37 #include "mt48lc16m16a2-75.h"
  38 #elif defined(CONFIG_DDR_MT46V32M16)
  39 #include "mt46v32m16.h"
  40 #elif defined(CONFIG_DDR_HYB25D512160BF)
  41 #include "hyb25d512160bf.h"
  42 #elif defined(CONFIG_DDR_K4H511638C)
  43 #include "k4h511638c.h"
  44 #else
  45 #error "INKA4x0 SDRAM: invalid chip type specified!"
  46 #endif
  47
  48 #ifndef CONFIG_SYS_RAMBOOT
  49 static void sdram_start (int hi_addr)
  50 {
  51         long hi_addr_bit = hi_addr ? 0x01000000 : 0;
  52
  53         /* unlock mode register */
  54         *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
  55         __asm__ volatile ("sync");
  56
  57         /* precharge all banks */
  58         *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
  59         __asm__ volatile ("sync");
  60
  61 #if SDRAM_DDR
  62         /* set mode register: extended mode */
  63         *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
  64         __asm__ volatile ("sync");
  65
  66         /* set mode register: reset DLL */
  67         *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
  68         __asm__ volatile ("sync");
  69 #endif
  70
  71         /* precharge all banks */
  72         *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
  73         __asm__ volatile ("sync");
  74
  75         /* auto refresh */
  76         *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
  77         __asm__ volatile ("sync");
  78
  79         /* set mode register */
  80         *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
  81         __asm__ volatile ("sync");
  82
  83         /* normal operation */
  84         *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
  85         __asm__ volatile ("sync");
  86 }
  87 #endif
  88
  89 /*
  90  * ATTENTION: Although partially referenced initdram does NOT make real use
  91  *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  92  *            is something else than 0x00000000.
  93  */
  94
  95 phys_size_t initdram (int board_type)
  96 {
  97         ulong dramsize = 0;
  98 #ifndef CONFIG_SYS_RAMBOOT
  99         long test1, test2;
 100
 101         /* setup SDRAM chip selects */
 102         *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
 103         *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */
 104         __asm__ volatile ("sync");
 105
 106         /* setup config registers */
 107         *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
 108         *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
 109         __asm__ volatile ("sync");
 110
 111 #if SDRAM_DDR
 112         /* set tap delay */
 113         *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
 114         __asm__ volatile ("sync");
 115 #endif
 116
 117         /* find RAM size using SDRAM CS0 only */
 118         sdram_start(0);
 119         test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 120         sdram_start(1);
 121         test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
 122         if (test1 > test2) {
 123                 sdram_start(0);
 124                 dramsize = test1;
 125         } else {
 126                 dramsize = test2;
 127         }
 128
 129         /* memory smaller than 1MB is impossible */
 130         if (dramsize < (1 << 20)) {
 131                 dramsize = 0;
 132         }
 133
 134         /* set SDRAM CS0 size according to the amount of RAM found */
 135         if (dramsize > 0) {
 136                 *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
 137                         __builtin_ffs(dramsize >> 20) - 1;
 138         } else {
 139                 *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
 140         }
 141
 142         *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 143 #else /* CONFIG_SYS_RAMBOOT */
 144
 145         /* retrieve size of memory connected to SDRAM CS0 */
 146         dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
 147         if (dramsize >= 0x13) {
 148                 dramsize = (1 << (dramsize - 0x13)) << 20;
 149         } else {
 150                 dramsize = 0;
 151         }
 152 #endif /* CONFIG_SYS_RAMBOOT */
 153
 154         return dramsize;
 155 }
 156
 157 int checkboard (void)
 158 {
 159         puts ("Board: INKA 4X0\n");
 160         return 0;
 161 }
 162
 163 void flash_preinit(void)
 164 {
 165         /*
 166          * Now, when we are in RAM, enable flash write
 167          * access for detection process.
 168          * Note that CS_BOOT cannot be cleared when
 169          * executing in flash.
 170          */
 171         *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
 172 }
 173
 174 int misc_init_f (void)
 175 {
 176         char tmp[10];
 177         int i, br;
 178
 179         i = getenv_r("brightness", tmp, sizeof(tmp));
 180         br = (i > 0)
 181                 ? (int) simple_strtoul (tmp, NULL, 10)
 182                 : CONFIG_SYS_BRIGHTNESS;
 183         if (br > 255)
 184                 br = 255;
 185
 186         /* Initialize GPIO output pins.
 187          */
 188         /* Configure GPT as GPIO output (and set them as they control low-active LEDs */
 189         *(vu_long *)MPC5XXX_GPT0_ENABLE =
 190         *(vu_long *)MPC5XXX_GPT1_ENABLE =
 191         *(vu_long *)MPC5XXX_GPT2_ENABLE =
 192         *(vu_long *)MPC5XXX_GPT3_ENABLE =
 193         *(vu_long *)MPC5XXX_GPT4_ENABLE =
 194         *(vu_long *)MPC5XXX_GPT5_ENABLE = 0x34;
 195
 196         /* Configure GPT7 as PWM timer, 1kHz, no ints. */
 197         *(vu_long *)MPC5XXX_GPT7_ENABLE = 0;/* Disable */
 198         *(vu_long *)MPC5XXX_GPT7_COUNTER = 0x020000fe;
 199         *(vu_long *)MPC5XXX_GPT7_PWMCFG = (br << 16);
 200         *(vu_long *)MPC5XXX_GPT7_ENABLE = 0x3;/* Enable PWM mode and start */
 201
 202         /* Configure PSC3_6,7 as GPIO output */
 203         *(vu_long *)MPC5XXX_GPIO_ENABLE |= 0x00003000;
 204         *(vu_long *)MPC5XXX_GPIO_DIR |= 0x00003000;
 205
 206         /* Configure PSC3_8 as GPIO output, no interrupt */
 207         *(vu_long *)MPC5XXX_GPIO_SI_ENABLE |= 0x04000000;
 208         *(vu_long *)MPC5XXX_GPIO_SI_DIR |= 0x04000000;
 209         *(vu_long *)MPC5XXX_GPIO_SI_IEN &= ~0x04000000;
 210
 211         /* Configure PSC3_9 and GPIO_WKUP6,7 as GPIO output */
 212         *(vu_long *)MPC5XXX_WU_GPIO_ENABLE |= 0xc4000000;
 213         *(vu_long *)MPC5XXX_WU_GPIO_DIR |= 0xc4000000;
 214
 215         /* Set LR mirror bit because it is low-active */
 216         *(vu_long *) MPC5XXX_WU_GPIO_DATA_O    |= GPIO_WKUP_7;
 217         /*
 218          * Reset Coral-P graphics controller
 219          */
 220         *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
 221         *(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC3_9;
 222         *(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC3_9;
 223         return 0;
 224 }
 225
 226 #ifdef  CONFIG_PCI
 227 static struct pci_controller hose;
 228
 229 extern void pci_mpc5xxx_init(struct pci_controller *);
 230
 231 void pci_init_board(void)
 232 {
 233         pci_mpc5xxx_init(&hose);
 234 }
 235 #endif
 236
 237 #if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 238
 239 void init_ide_reset (void)
 240 {
 241         debug ("init_ide_reset\n");
 242
 243         /* Configure PSC1_4 as GPIO output for ATA reset */
 244         *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
 245         *(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
 246         /* Deassert reset */
 247         *(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC1_4;
 248 }
 249
 250 void ide_set_reset (int idereset)
 251 {
 252         debug ("ide_reset(%d)\n", idereset);
 253
 254         if (idereset) {
 255                 *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 256                 /* Make a delay. MPC5200 spec says 25 usec min */
 257                 udelay(500000);
 258         } else {
 259                 *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 260         }
 261 }
 262 #endif