2 * (C) Copyright 2004-2008
3 * Texas Instruments, <www.ti.com>
6 * Nishanth Menon <nm@ti.com>
8 * Derived from Beagle Board and 3430 SDP code by
9 * Sunil Kumar <sunilsaini05@gmail.com>
10 * Shashi Ranjan <shashiranjanmca05@gmail.com>
11 * Richard Woodruff <r-woodruff2@ti.com>
12 * Syed Mohammed Khasim <khasim@ti.com>
15 * SPDX-License-Identifier: GPL-2.0+
23 #include <asm/arch/mem.h>
24 #include <asm/arch/mmc_host_def.h>
25 #include <asm/arch/mux.h>
26 #include <asm/arch/sys_proto.h>
27 #include <asm/mach-types.h>
30 DECLARE_GLOBAL_DATA_PTR
;
32 /* gpmc_cfg is initialized by gpmc_init and we use it here */
33 extern struct gpmc
*gpmc_cfg
;
35 /* GPMC definitions for Ethenet Controller LAN9211 */
36 static const u32 gpmc_lab_enet
[] = {
37 ZOOM1_ENET_GPMC_CONF1
,
38 ZOOM1_ENET_GPMC_CONF2
,
39 ZOOM1_ENET_GPMC_CONF3
,
40 ZOOM1_ENET_GPMC_CONF4
,
41 ZOOM1_ENET_GPMC_CONF5
,
42 ZOOM1_ENET_GPMC_CONF6
,
43 /*CONF7- computed as params */
46 static const struct ns16550_platdata zoom1_serial
= {
52 U_BOOT_DEVICE(zoom1_uart
) = {
59 * Description: Early hardware init.
63 gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
64 /* CS1 is Ethernet LAN9211 */
65 enable_gpmc_cs_config(gpmc_lab_enet
, &gpmc_cfg
->cs
[1],
66 DEBUG_BASE
, GPMC_SIZE_16M
);
67 /* board id for Linux */
68 gd
->bd
->bi_arch_number
= MACH_TYPE_OMAP_LDP
;
70 gd
->bd
->bi_boot_params
= (OMAP34XX_SDRC_CS0
+ 0x100);
76 * Routine: misc_init_r
77 * Description: Configure zoom board specific configurations
82 twl4030_led_init(TWL4030_LED_LEDEN_LEDAON
| TWL4030_LED_LEDEN_LEDBON
);
87 * The board is reset by holding the red button on the
88 * top right front face for eight seconds.
90 twl4030_power_reset_init();
96 * Routine: set_muxconf_regs
97 * Description: Setting up the configuration Mux registers specific to the
98 * hardware. Many pins need to be moved from protect to primary
101 void set_muxconf_regs(void)
103 /* platform specific muxes */
107 #ifdef CONFIG_GENERIC_MMC
108 int board_mmc_init(bd_t
*bis
)
110 return omap_mmc_init(0, 0, 0, -1, -1);
113 void board_mmc_power_init(void)
115 twl4030_power_mmc_init(0);
119 #ifdef CONFIG_CMD_NET
120 int board_eth_init(bd_t
*bis
)
124 #ifdef CONFIG_SMC911X
125 #define STR_ENV_ETHADDR "ethaddr"
127 struct eth_device
*dev
;
130 rc
= smc911x_initialize(0, CONFIG_SMC911X_BASE
);
131 if (!eth_getenv_enetaddr(STR_ENV_ETHADDR
, eth_addr
)) {
132 dev
= eth_get_dev_by_index(0);
134 eth_setenv_enetaddr(STR_ENV_ETHADDR
, dev
->enetaddr
);
136 printf("zoom1: Couldn't get eth device\n");