]> git.ipfire.org Git - people/ms/u-boot.git/blob - board/sandpoint/sandpoint.c
Add GPL-2.0+ SPDX-License-Identifier to source files
[people/ms/u-boot.git] / board / sandpoint / sandpoint.c
1 /*
2 * (C) Copyright 2000
3 * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8 #include <common.h>
9 #include <mpc824x.h>
10 #include <pci.h>
11 #include <netdev.h>
12
13 int checkboard (void)
14 {
15 /*TODO: Check processor type */
16
17 puts ( "Board: Sandpoint "
18 #ifdef CONFIG_MPC8240
19 "8240"
20 #endif
21 #ifdef CONFIG_MPC8245
22 "8245"
23 #endif
24 " Unity ##Test not implemented yet##\n");
25 return 0;
26 }
27
28 #if 0 /* NOT USED */
29 int checkflash (void)
30 {
31 /* TODO: XXX XXX XXX */
32 printf ("## Test not implemented yet ##\n");
33
34 return (0);
35 }
36 #endif
37
38 phys_size_t initdram (int board_type)
39 {
40 long size;
41 long new_bank0_end;
42 long mear1;
43 long emear1;
44
45 size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
46
47 new_bank0_end = size - 1;
48 mear1 = mpc824x_mpc107_getreg(MEAR1);
49 emear1 = mpc824x_mpc107_getreg(EMEAR1);
50 mear1 = (mear1 & 0xFFFFFF00) |
51 ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
52 emear1 = (emear1 & 0xFFFFFF00) |
53 ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
54 mpc824x_mpc107_setreg(MEAR1, mear1);
55 mpc824x_mpc107_setreg(EMEAR1, emear1);
56
57 return (size);
58 }
59
60 /*
61 * Initialize PCI Devices, report devices found.
62 */
63 #ifndef CONFIG_PCI_PNP
64 static struct pci_config_table pci_sandpoint_config_table[] = {
65 { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
66 pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
67 PCI_ENET0_MEMADDR,
68 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
69 { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
70 pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
71 PCI_ENET1_MEMADDR,
72 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
73 { }
74 };
75 #endif
76
77 struct pci_controller hose = {
78 #ifndef CONFIG_PCI_PNP
79 config_table: pci_sandpoint_config_table,
80 #endif
81 };
82
83 void pci_init_board(void)
84 {
85 pci_mpc824x_init(&hose);
86 }
87
88 int board_eth_init(bd_t *bis)
89 {
90 return pci_eth_init(bis);
91 }