board/sbc8349/sbc8349.c

   1 /*
   2  * sbc8349.c -- WindRiver SBC8349 board support.
   3  * Copyright (c) 2006-2007 Wind River Systems, Inc.
   4  *
   5  * Paul Gortmaker <paul.gortmaker@windriver.com>
   6  * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.)
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  *
  26  */
  27
  28 #include <common.h>
  29 #include <ioports.h>
  30 #include <mpc83xx.h>
  31 #include <asm/mpc8349_pci.h>
  32 #include <i2c.h>
  33 #include <spd_sdram.h>
  34 #include <miiphy.h>
  35 #if defined(CONFIG_OF_LIBFDT)
  36 #include <libfdt.h>
  37 #endif
  38
  39 int fixed_sdram(void);
  40 void sdram_init(void);
  41
  42 #if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX)
  43 void ddr_enable_ecc(unsigned int dram_size);
  44 #endif
  45
  46 #ifdef CONFIG_BOARD_EARLY_INIT_F
  47 int board_early_init_f (void)
  48 {
  49         return 0;
  50 }
  51 #endif
  52
  53 #define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
  54
  55 phys_size_t initdram (int board_type)
  56 {
  57         volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
  58         u32 msize = 0;
  59
  60         if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
  61                 return -1;
  62
  63         /* DDR SDRAM - Main SODIMM */
  64         im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
  65 #if defined(CONFIG_SPD_EEPROM)
  66         msize = spd_sdram();
  67 #else
  68         msize = fixed_sdram();
  69 #endif
  70         /*
  71          * Initialize SDRAM if it is on local bus.
  72          */
  73         sdram_init();
  74
  75 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
  76         /*
  77          * Initialize and enable DDR ECC.
  78          */
  79         ddr_enable_ecc(msize * 1024 * 1024);
  80 #endif
  81         /* return total bus SDRAM size(bytes)  -- DDR */
  82         return (msize * 1024 * 1024);
  83 }
  84
  85 #if !defined(CONFIG_SPD_EEPROM)
  86 /*************************************************************************
  87  *  fixed sdram init -- doesn't use serial presence detect.
  88  ************************************************************************/
  89 int fixed_sdram(void)
  90 {
  91         volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
  92         u32 msize = 0;
  93         u32 ddr_size;
  94         u32 ddr_size_log2;
  95
  96         msize = CONFIG_SYS_DDR_SIZE;
  97         for (ddr_size = msize << 20, ddr_size_log2 = 0;
  98              (ddr_size > 1);
  99              ddr_size = ddr_size>>1, ddr_size_log2++) {
 100                 if (ddr_size & 1) {
 101                         return -1;
 102                 }
 103         }
 104         im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
 105         im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
 106
 107 #if (CONFIG_SYS_DDR_SIZE != 256)
 108 #warning Currently any ddr size other than 256 is not supported
 109 #endif
 110         im->ddr.csbnds[2].csbnds = 0x0000000f;
 111         im->ddr.cs_config[2] = CONFIG_SYS_DDR_CONFIG;
 112
 113         /* currently we use only one CS, so disable the other banks */
 114         im->ddr.cs_config[0] = 0;
 115         im->ddr.cs_config[1] = 0;
 116         im->ddr.cs_config[3] = 0;
 117
 118         im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
 119         im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
 120
 121         im->ddr.sdram_cfg =
 122                 SDRAM_CFG_SREN
 123 #if defined(CONFIG_DDR_2T_TIMING)
 124                 | SDRAM_CFG_2T_EN
 125 #endif
 126                 | SDRAM_CFG_SDRAM_TYPE_DDR1;
 127 #if defined (CONFIG_DDR_32BIT)
 128         /* for 32-bit mode burst length is 8 */
 129         im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
 130 #endif
 131         im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
 132
 133         im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
 134         udelay(200);
 135
 136         /* enable DDR controller */
 137         im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
 138         return msize;
 139 }
 140 #endif/*!CONFIG_SYS_SPD_EEPROM*/
 141
 142
 143 int checkboard (void)
 144 {
 145         puts("Board: Wind River SBC834x\n");
 146         return 0;
 147 }
 148
 149 /*
 150  * if board is fitted with SDRAM
 151  */
 152 #if defined(CONFIG_SYS_BR2_PRELIM)  \
 153         && defined(CONFIG_SYS_OR2_PRELIM) \
 154         && defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
 155         && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
 156 /*
 157  * Initialize SDRAM memory on the Local Bus.
 158  */
 159
 160 void sdram_init(void)
 161 {
 162         volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 163         volatile lbus83xx_t *lbc= &immap->lbus;
 164         uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 165
 166         puts("\n   SDRAM on Local Bus: ");
 167         print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
 168
 169         /*
 170          * Setup SDRAM Base and Option Registers, already done in cpu_init.c
 171          */
 172
 173         /* setup mtrpt, lsrt and lbcr for LB bus */
 174         lbc->lbcr = CONFIG_SYS_LBC_LBCR;
 175         lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
 176         lbc->lsrt = CONFIG_SYS_LBC_LSRT;
 177         asm("sync");
 178
 179         /*
 180          * Configure the SDRAM controller Machine Mode Register.
 181          */
 182         lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
 183
 184         lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
 185         asm("sync");
 186         *sdram_addr = 0xff;
 187         udelay(100);
 188
 189         lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
 190         asm("sync");
 191         /*1 times*/
 192         *sdram_addr = 0xff;
 193         udelay(100);
 194         /*2 times*/
 195         *sdram_addr = 0xff;
 196         udelay(100);
 197         /*3 times*/
 198         *sdram_addr = 0xff;
 199         udelay(100);
 200         /*4 times*/
 201         *sdram_addr = 0xff;
 202         udelay(100);
 203         /*5 times*/
 204         *sdram_addr = 0xff;
 205         udelay(100);
 206         /*6 times*/
 207         *sdram_addr = 0xff;
 208         udelay(100);
 209         /*7 times*/
 210         *sdram_addr = 0xff;
 211         udelay(100);
 212         /*8 times*/
 213         *sdram_addr = 0xff;
 214         udelay(100);
 215
 216         /* 0x58636733; mode register write operation */
 217         lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
 218         asm("sync");
 219         *sdram_addr = 0xff;
 220         udelay(100);
 221
 222         lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
 223         asm("sync");
 224         *sdram_addr = 0xff;
 225         udelay(100);
 226 }
 227 #else
 228 void sdram_init(void)
 229 {
 230         puts("   SDRAM on Local Bus: Disabled in config\n");
 231 }
 232 #endif
 233
 234 #if defined(CONFIG_OF_BOARD_SETUP)
 235 void ft_board_setup(void *blob, bd_t *bd)
 236 {
 237         ft_cpu_setup(blob, bd);
 238 #ifdef CONFIG_PCI
 239         ft_pci_setup(blob, bd);
 240 #endif
 241 }
 242 #endif