board/zipitz2/zipitz2.c

   1 /*
   2  * Copyright (C) 2009
   3  * Marek Vasut <marek.vasut@gmail.com>
   4  *
   5  * Heavily based on pxa255_idp platform
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #include <common.h>
  27 #include <command.h>
  28 #include <serial.h>
  29 #include <asm/arch/hardware.h>
  30 #include <asm/arch/pxa.h>
  31 #include <asm/arch/regs-mmc.h>
  32 #include <spi.h>
  33 #include <asm/io.h>
  34
  35 DECLARE_GLOBAL_DATA_PTR;
  36
  37 #ifdef  CONFIG_CMD_SPI
  38 void lcd_start(void);
  39 #else
  40 inline void lcd_start(void) {};
  41 #endif
  42
  43 /*
  44  * Miscelaneous platform dependent initialisations
  45  */
  46
  47 int board_init (void)
  48 {
  49         /* We have RAM, disable cache */
  50         dcache_disable();
  51         icache_disable();
  52
  53         /* arch number of Z2 */
  54         gd->bd->bi_arch_number = MACH_TYPE_ZIPIT2;
  55
  56         /* adress of boot parameters */
  57         gd->bd->bi_boot_params = 0xa0000100;
  58
  59         /* Enable LCD */
  60         lcd_start();
  61
  62         return 0;
  63 }
  64
  65 struct serial_device *default_serial_console (void)
  66 {
  67         return &serial_stuart_device;
  68 }
  69
  70 int dram_init(void)
  71 {
  72         pxa2xx_dram_init();
  73         gd->ram_size = PHYS_SDRAM_1_SIZE;
  74         return 0;
  75 }
  76
  77 void dram_init_banksize(void)
  78 {
  79         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
  80         gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
  81 }
  82
  83 #ifdef  CONFIG_CMD_MMC
  84 int board_mmc_init(bd_t *bis)
  85 {
  86         pxa_mmc_register(0);
  87         return 0;
  88 }
  89 #endif
  90
  91 #ifdef  CONFIG_CMD_SPI
  92
  93 struct {
  94         unsigned char   reg;
  95         unsigned short  data;
  96         unsigned char   mdelay;
  97 } lcd_data[] = {
  98         { 0x07, 0x0000, 0 },
  99         { 0x13, 0x0000, 10 },
 100         { 0x11, 0x3004, 0 },
 101         { 0x14, 0x200F, 0 },
 102         { 0x10, 0x1a20, 0 },
 103         { 0x13, 0x0040, 50 },
 104         { 0x13, 0x0060, 0 },
 105         { 0x13, 0x0070, 200 },
 106         { 0x01, 0x0127, 0 },
 107         { 0x02, 0x0700, 0 },
 108         { 0x03, 0x1030, 0 },
 109         { 0x08, 0x0208, 0 },
 110         { 0x0B, 0x0620, 0 },
 111         { 0x0C, 0x0110, 0 },
 112         { 0x30, 0x0120, 0 },
 113         { 0x31, 0x0127, 0 },
 114         { 0x32, 0x0000, 0 },
 115         { 0x33, 0x0503, 0 },
 116         { 0x34, 0x0727, 0 },
 117         { 0x35, 0x0124, 0 },
 118         { 0x36, 0x0706, 0 },
 119         { 0x37, 0x0701, 0 },
 120         { 0x38, 0x0F00, 0 },
 121         { 0x39, 0x0F00, 0 },
 122         { 0x40, 0x0000, 0 },
 123         { 0x41, 0x0000, 0 },
 124         { 0x42, 0x013f, 0 },
 125         { 0x43, 0x0000, 0 },
 126         { 0x44, 0x013f, 0 },
 127         { 0x45, 0x0000, 0 },
 128         { 0x46, 0xef00, 0 },
 129         { 0x47, 0x013f, 0 },
 130         { 0x48, 0x0000, 0 },
 131         { 0x07, 0x0015, 30 },
 132         { 0x07, 0x0017, 0 },
 133         { 0x20, 0x0000, 0 },
 134         { 0x21, 0x0000, 0 },
 135         { 0x22, 0x0000, 0 },
 136 };
 137
 138 void zipitz2_spi_sda(int set)
 139 {
 140         /* GPIO 13 */
 141         if (set)
 142                 writel((1 << 13), GPSR0);
 143         else
 144                 writel((1 << 13), GPCR0);
 145 }
 146
 147 void zipitz2_spi_scl(int set)
 148 {
 149         /* GPIO 22 */
 150         if (set)
 151                 writel((1 << 22), GPCR0);
 152         else
 153                 writel((1 << 22), GPSR0);
 154 }
 155
 156 unsigned char zipitz2_spi_read(void)
 157 {
 158         /* GPIO 40 */
 159         return !!(readl(GPLR1) & (1 << 8));
 160 }
 161
 162 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 163 {
 164         /* Always valid */
 165         return 1;
 166 }
 167
 168 void spi_cs_activate(struct spi_slave *slave)
 169 {
 170         /* GPIO 88 low */
 171         writel((1 << 24), GPCR2);
 172 }
 173
 174 void spi_cs_deactivate(struct spi_slave *slave)
 175 {
 176         /* GPIO 88 high */
 177         writel((1 << 24), GPSR2);
 178
 179 }
 180
 181 void lcd_start(void)
 182 {
 183         int i;
 184         unsigned char reg[3] = { 0x74, 0x00, 0 };
 185         unsigned char data[3] = { 0x76, 0, 0 };
 186         unsigned char dummy[3] = { 0, 0, 0 };
 187
 188         /* PWM2 AF */
 189         writel(readl(GAFR0_L) | 0x00800000, GAFR0_L);
 190         /* Enable clock to all PWM */
 191         writel(readl(CKEN) | 0x3, CKEN);
 192         /* Configure PWM2 */
 193         writel(0x4f, PWM_CTRL2);
 194         writel(0x2ff, PWM_PWDUTY2);
 195         writel(792, PWM_PERVAL2);
 196
 197         /* Toggle the reset pin to reset the LCD */
 198         writel((1 << 19), GPSR0);
 199         udelay(100000);
 200         writel((1 << 19), GPCR0);
 201         udelay(20000);
 202         writel((1 << 19), GPSR0);
 203         udelay(20000);
 204
 205         /* Program the LCD init sequence */
 206         for (i = 0; i < sizeof(lcd_data) / sizeof(lcd_data[0]); i++) {
 207                 reg[0] = 0x74;
 208                 reg[1] = 0x0;
 209                 reg[2] = lcd_data[i].reg;
 210                 spi_xfer(NULL, 24, reg, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
 211
 212                 data[0] = 0x76;
 213                 data[1] = lcd_data[i].data >> 8;
 214                 data[2] = lcd_data[i].data & 0xff;
 215                 spi_xfer(NULL, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END);
 216
 217                 if (lcd_data[i].mdelay)
 218                         udelay(lcd_data[i].mdelay * 1000);
 219         }
 220
 221         writel((1 << 11), GPSR0);
 222 }
 223 #endif