cmd/fpga.c

   1 /*
   2  * (C) Copyright 2000, 2001
   3  * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  *  FPGA support
  10  */
  11 #include <common.h>
  12 #include <command.h>
  13 #include <fpga.h>
  14 #include <fs.h>
  15 #include <malloc.h>
  16
  17 /* Local functions */
  18 static int fpga_get_op(char *opstr);
  19
  20 /* Local defines */
  21 enum {
  22         FPGA_NONE = -1,
  23         FPGA_INFO,
  24         FPGA_LOAD,
  25         FPGA_LOADB,
  26         FPGA_DUMP,
  27         FPGA_LOADMK,
  28         FPGA_LOADP,
  29         FPGA_LOADBP,
  30         FPGA_LOADFS,
  31 };
  32
  33 /* ------------------------------------------------------------------------- */
  34 /* command form:
  35  *   fpga <op> <device number> <data addr> <datasize>
  36  * where op is 'load', 'dump', or 'info'
  37  * If there is no device number field, the fpga environment variable is used.
  38  * If there is no data addr field, the fpgadata environment variable is used.
  39  * The info command requires no data address field.
  40  */
  41 int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
  42 {
  43         int op, dev = FPGA_INVALID_DEVICE;
  44         size_t data_size = 0;
  45         void *fpga_data = NULL;
  46         char *devstr = env_get("fpga");
  47         char *datastr = env_get("fpgadata");
  48         int rc = FPGA_FAIL;
  49         int wrong_parms = 0;
  50 #if defined(CONFIG_FIT)
  51         const char *fit_uname = NULL;
  52         ulong fit_addr;
  53 #endif
  54 #if defined(CONFIG_CMD_FPGA_LOADFS)
  55         fpga_fs_info fpga_fsinfo;
  56         fpga_fsinfo.fstype = FS_TYPE_ANY;
  57 #endif
  58
  59         if (devstr)
  60                 dev = (int) simple_strtoul(devstr, NULL, 16);
  61         if (datastr)
  62                 fpga_data = (void *)simple_strtoul(datastr, NULL, 16);
  63
  64         switch (argc) {
  65 #if defined(CONFIG_CMD_FPGA_LOADFS)
  66         case 9:
  67                 fpga_fsinfo.blocksize = (unsigned int)
  68                                              simple_strtoul(argv[5], NULL, 16);
  69                 fpga_fsinfo.interface = argv[6];
  70                 fpga_fsinfo.dev_part = argv[7];
  71                 fpga_fsinfo.filename = argv[8];
  72 #endif
  73         case 5:         /* fpga <op> <dev> <data> <datasize> */
  74                 data_size = simple_strtoul(argv[4], NULL, 16);
  75
  76         case 4:         /* fpga <op> <dev> <data> */
  77 #if defined(CONFIG_FIT)
  78                 if (fit_parse_subimage(argv[3], (ulong)fpga_data,
  79                                        &fit_addr, &fit_uname)) {
  80                         fpga_data = (void *)fit_addr;
  81                         debug("*  fpga: subimage '%s' from FIT image ",
  82                               fit_uname);
  83                         debug("at 0x%08lx\n", fit_addr);
  84                 } else
  85 #endif
  86                 {
  87                         fpga_data = (void *)simple_strtoul(argv[3], NULL, 16);
  88                         debug("*  fpga: cmdline image address = 0x%08lx\n",
  89                               (ulong)fpga_data);
  90                 }
  91                 debug("%s: fpga_data = 0x%lx\n", __func__, (ulong)fpga_data);
  92
  93         case 3:         /* fpga <op> <dev | data addr> */
  94                 dev = (int)simple_strtoul(argv[2], NULL, 16);
  95                 debug("%s: device = %d\n", __func__, dev);
  96                 /* FIXME - this is a really weak test */
  97                 if ((argc == 3) && (dev > fpga_count())) {
  98                         /* must be buffer ptr */
  99                         debug("%s: Assuming buffer pointer in arg 3\n",
 100                               __func__);
 101
 102 #if defined(CONFIG_FIT)
 103                         if (fit_parse_subimage(argv[2], (ulong)fpga_data,
 104                                                &fit_addr, &fit_uname)) {
 105                                 fpga_data = (void *)fit_addr;
 106                                 debug("*  fpga: subimage '%s' from FIT image ",
 107                                       fit_uname);
 108                                 debug("at 0x%08lx\n", fit_addr);
 109                         } else
 110 #endif
 111                         {
 112                                 fpga_data = (void *)(uintptr_t)dev;
 113                                 debug("*  fpga: cmdline image addr = 0x%08lx\n",
 114                                       (ulong)fpga_data);
 115                         }
 116
 117                         debug("%s: fpga_data = 0x%lx\n",
 118                               __func__, (ulong)fpga_data);
 119                         dev = FPGA_INVALID_DEVICE;      /* reset device num */
 120                 }
 121
 122         case 2:         /* fpga <op> */
 123                 op = (int)fpga_get_op(argv[1]);
 124                 break;
 125
 126         default:
 127                 debug("%s: Too many or too few args (%d)\n", __func__, argc);
 128                 op = FPGA_NONE; /* force usage display */
 129                 break;
 130         }
 131
 132         if (dev == FPGA_INVALID_DEVICE) {
 133                 puts("FPGA device not specified\n");
 134                 op = FPGA_NONE;
 135         }
 136
 137         switch (op) {
 138         case FPGA_NONE:
 139         case FPGA_INFO:
 140                 break;
 141 #if defined(CONFIG_CMD_FPGA_LOADFS)
 142         case FPGA_LOADFS:
 143                 /* Blocksize can be zero */
 144                 if (!fpga_fsinfo.interface || !fpga_fsinfo.dev_part ||
 145                     !fpga_fsinfo.filename)
 146                         wrong_parms = 1;
 147 #endif
 148         case FPGA_LOAD:
 149         case FPGA_LOADP:
 150         case FPGA_LOADB:
 151         case FPGA_LOADBP:
 152         case FPGA_DUMP:
 153                 if (!fpga_data || !data_size)
 154                         wrong_parms = 1;
 155                 break;
 156 #if defined(CONFIG_CMD_FPGA_LOADMK)
 157         case FPGA_LOADMK:
 158                 if (!fpga_data)
 159                         wrong_parms = 1;
 160                 break;
 161 #endif
 162         }
 163
 164         if (wrong_parms) {
 165                 puts("Wrong parameters for FPGA request\n");
 166                 op = FPGA_NONE;
 167         }
 168
 169         switch (op) {
 170         case FPGA_NONE:
 171                 return CMD_RET_USAGE;
 172
 173         case FPGA_INFO:
 174                 rc = fpga_info(dev);
 175                 break;
 176
 177         case FPGA_LOAD:
 178                 rc = fpga_load(dev, fpga_data, data_size, BIT_FULL);
 179                 break;
 180
 181 #if defined(CONFIG_CMD_FPGA_LOADP)
 182         case FPGA_LOADP:
 183                 rc = fpga_load(dev, fpga_data, data_size, BIT_PARTIAL);
 184                 break;
 185 #endif
 186
 187         case FPGA_LOADB:
 188                 rc = fpga_loadbitstream(dev, fpga_data, data_size, BIT_FULL);
 189                 break;
 190
 191 #if defined(CONFIG_CMD_FPGA_LOADBP)
 192         case FPGA_LOADBP:
 193                 rc = fpga_loadbitstream(dev, fpga_data, data_size, BIT_PARTIAL);
 194                 break;
 195 #endif
 196
 197 #if defined(CONFIG_CMD_FPGA_LOADFS)
 198         case FPGA_LOADFS:
 199                 rc = fpga_fsload(dev, fpga_data, data_size, &fpga_fsinfo);
 200                 break;
 201 #endif
 202
 203 #if defined(CONFIG_CMD_FPGA_LOADMK)
 204         case FPGA_LOADMK:
 205                 switch (genimg_get_format(fpga_data)) {
 206 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
 207                 case IMAGE_FORMAT_LEGACY:
 208                         {
 209                                 image_header_t *hdr =
 210                                                 (image_header_t *)fpga_data;
 211                                 ulong data;
 212                                 uint8_t comp;
 213
 214                                 comp = image_get_comp(hdr);
 215                                 if (comp == IH_COMP_GZIP) {
 216 #if defined(CONFIG_GZIP)
 217                                         ulong image_buf = image_get_data(hdr);
 218                                         data = image_get_load(hdr);
 219                                         ulong image_size = ~0UL;
 220
 221                                         if (gunzip((void *)data, ~0UL,
 222                                                    (void *)image_buf,
 223                                                    &image_size) != 0) {
 224                                                 puts("GUNZIP: error\n");
 225                                                 return 1;
 226                                         }
 227                                         data_size = image_size;
 228 #else
 229                                         puts("Gunzip image is not supported\n");
 230                                         return 1;
 231 #endif
 232                                 } else {
 233                                         data = (ulong)image_get_data(hdr);
 234                                         data_size = image_get_data_size(hdr);
 235                                 }
 236                                 rc = fpga_load(dev, (void *)data, data_size,
 237                                                BIT_FULL);
 238                         }
 239                         break;
 240 #endif
 241 #if defined(CONFIG_FIT)
 242                 case IMAGE_FORMAT_FIT:
 243                         {
 244                                 const void *fit_hdr = (const void *)fpga_data;
 245                                 int noffset;
 246                                 const void *fit_data;
 247
 248                                 if (fit_uname == NULL) {
 249                                         puts("No FIT subimage unit name\n");
 250                                         return 1;
 251                                 }
 252
 253                                 if (!fit_check_format(fit_hdr)) {
 254                                         puts("Bad FIT image format\n");
 255                                         return 1;
 256                                 }
 257
 258                                 /* get fpga component image node offset */
 259                                 noffset = fit_image_get_node(fit_hdr,
 260                                                              fit_uname);
 261                                 if (noffset < 0) {
 262                                         printf("Can't find '%s' FIT subimage\n",
 263                                                fit_uname);
 264                                         return 1;
 265                                 }
 266
 267                                 /* verify integrity */
 268                                 if (!fit_image_verify(fit_hdr, noffset)) {
 269                                         puts ("Bad Data Hash\n");
 270                                         return 1;
 271                                 }
 272
 273                                 /* get fpga subimage data address and length */
 274                                 if (fit_image_get_data(fit_hdr, noffset,
 275                                                        &fit_data, &data_size)) {
 276                                         puts("Fpga subimage data not found\n");
 277                                         return 1;
 278                                 }
 279
 280                                 rc = fpga_load(dev, fit_data, data_size,
 281                                                BIT_FULL);
 282                         }
 283                         break;
 284 #endif
 285                 default:
 286                         puts("** Unknown image type\n");
 287                         rc = FPGA_FAIL;
 288                         break;
 289                 }
 290                 break;
 291 #endif
 292
 293         case FPGA_DUMP:
 294                 rc = fpga_dump(dev, fpga_data, data_size);
 295                 break;
 296
 297         default:
 298                 printf("Unknown operation\n");
 299                 return CMD_RET_USAGE;
 300         }
 301         return rc;
 302 }
 303
 304 /*
 305  * Map op to supported operations.  We don't use a table since we
 306  * would just have to relocate it from flash anyway.
 307  */
 308 static int fpga_get_op(char *opstr)
 309 {
 310         int op = FPGA_NONE;
 311
 312         if (!strcmp("info", opstr))
 313                 op = FPGA_INFO;
 314         else if (!strcmp("loadb", opstr))
 315                 op = FPGA_LOADB;
 316         else if (!strcmp("load", opstr))
 317                 op = FPGA_LOAD;
 318 #if defined(CONFIG_CMD_FPGA_LOADP)
 319         else if (!strcmp("loadp", opstr))
 320                 op = FPGA_LOADP;
 321 #endif
 322 #if defined(CONFIG_CMD_FPGA_LOADBP)
 323         else if (!strcmp("loadbp", opstr))
 324                 op = FPGA_LOADBP;
 325 #endif
 326 #if defined(CONFIG_CMD_FPGA_LOADFS)
 327         else if (!strcmp("loadfs", opstr))
 328                 op = FPGA_LOADFS;
 329 #endif
 330 #if defined(CONFIG_CMD_FPGA_LOADMK)
 331         else if (!strcmp("loadmk", opstr))
 332                 op = FPGA_LOADMK;
 333 #endif
 334         else if (!strcmp("dump", opstr))
 335                 op = FPGA_DUMP;
 336
 337         if (op == FPGA_NONE)
 338                 printf("Unknown fpga operation \"%s\"\n", opstr);
 339
 340         return op;
 341 }
 342
 343 #if defined(CONFIG_CMD_FPGA_LOADFS)
 344 U_BOOT_CMD(fpga, 9, 1, do_fpga,
 345 #else
 346 U_BOOT_CMD(fpga, 6, 1, do_fpga,
 347 #endif
 348            "loadable FPGA image support",
 349            "[operation type] [device number] [image address] [image size]\n"
 350            "fpga operations:\n"
 351            "  dump\t[dev] [address] [size]\tLoad device to memory buffer\n"
 352            "  info\t[dev]\t\t\tlist known device information\n"
 353            "  load\t[dev] [address] [size]\tLoad device from memory buffer\n"
 354 #if defined(CONFIG_CMD_FPGA_LOADP)
 355            "  loadp\t[dev] [address] [size]\t"
 356            "Load device from memory buffer with partial bitstream\n"
 357 #endif
 358            "  loadb\t[dev] [address] [size]\t"
 359            "Load device from bitstream buffer (Xilinx only)\n"
 360 #if defined(CONFIG_CMD_FPGA_LOADBP)
 361            "  loadbp\t[dev] [address] [size]\t"
 362            "Load device from bitstream buffer with partial bitstream"
 363            "(Xilinx only)\n"
 364 #endif
 365 #if defined(CONFIG_CMD_FPGA_LOADFS)
 366            "Load device from filesystem (FAT by default) (Xilinx only)\n"
 367            "  loadfs [dev] [address] [image size] [blocksize] <interface>\n"
 368            "        [<dev[:part]>] <filename>\n"
 369 #endif
 370 #if defined(CONFIG_CMD_FPGA_LOADMK)
 371            "  loadmk [dev] [address]\tLoad device generated with mkimage"
 372 #if defined(CONFIG_FIT)
 373            "\n"
 374            "\tFor loadmk operating on FIT format uImage address must include\n"
 375            "\tsubimage unit name in the form of addr:<subimg_uname>"
 376 #endif
 377 #endif
 378 );