common/Kconfig

   1 menu "Boot timing"
   2
   3 config BOOTSTAGE
   4         bool "Boot timing and reporting"
   5         help
   6           Enable recording of boot time while booting. To use it, insert
   7           calls to bootstage_mark() with a suitable BOOTSTAGE_ID from
   8           bootstage.h. Only a single entry is recorded for each ID. You can
   9           give the entry a name with bootstage_mark_name(). You can also
  10           record elapsed time in a particular stage using bootstage_start()
  11           before starting and bootstage_accum() when finished. Bootstage will
  12           add up all the accumulated time and report it.
  13
  14           Normally, IDs are defined in bootstage.h but a small number of
  15           additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC
  16           as the ID.
  17
  18           Calls to show_boot_progress() will also result in log entries but
  19           these will not have names.
  20
  21 config BOOTSTAGE_REPORT
  22         bool "Display a detailed boot timing report before booting the OS"
  23         depends on BOOTSTAGE
  24         help
  25           Enable output of a boot time report just before the OS is booted.
  26           This shows how long it took U-Boot to go through each stage of the
  27           boot process. The report looks something like this:
  28
  29                 Timer summary in microseconds:
  30                        Mark    Elapsed  Stage
  31                           0          0  reset
  32                   3,575,678  3,575,678  board_init_f start
  33                   3,575,695         17  arch_cpu_init A9
  34                   3,575,777         82  arch_cpu_init done
  35                   3,659,598     83,821  board_init_r start
  36                   3,910,375    250,777  main_loop
  37                  29,916,167 26,005,792  bootm_start
  38                  30,361,327    445,160  start_kernel
  39
  40 config BOOTSTAGE_USER_COUNT
  41         hex "Number of boot ID numbers available for user use"
  42         default 20
  43         help
  44           This is the number of available user bootstage records.
  45           Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...)
  46           a new ID will be allocated from this stash. If you exceed
  47           the limit, recording will stop.
  48
  49 config BOOTSTAGE_FDT
  50         bool "Store boot timing information in the OS device tree"
  51         depends on BOOTSTAGE
  52         help
  53           Stash the bootstage information in the FDT. A root 'bootstage'
  54           node is created with each bootstage id as a child. Each child
  55           has a 'name' property and either 'mark' containing the
  56           mark time in microseconds, or 'accum' containing the
  57           accumulated time for that bootstage id in microseconds.
  58           For example:
  59
  60                 bootstage {
  61                         154 {
  62                                 name = "board_init_f";
  63                                 mark = <3575678>;
  64                         };
  65                         170 {
  66                                 name = "lcd";
  67                                 accum = <33482>;
  68                         };
  69                 };
  70
  71           Code in the Linux kernel can find this in /proc/devicetree.
  72
  73 config BOOTSTAGE_STASH
  74         bool "Stash the boot timing information in memory before booting OS"
  75         depends on BOOTSTAGE
  76         help
  77           Some OSes do not support device tree. Bootstage can instead write
  78           the boot timing information in a binary format at a given address.
  79           This happens through a call to bootstage_stash(), typically in
  80           the CPU's cleanup_before_linux() function. You can use the
  81           'bootstage stash' and 'bootstage unstash' commands to do this on
  82           the command line.
  83
  84 config BOOTSTAGE_STASH_ADDR
  85         hex "Address to stash boot timing information"
  86         default 0
  87         help
  88           Provide an address which will not be overwritten by the OS when it
  89           starts, so that it can read this information when ready.
  90
  91 config BOOTSTAGE_STASH_SIZE
  92         hex "Size of boot timing stash region"
  93         default 4096
  94         help
  95           This should be large enough to hold the bootstage stash. A value of
  96           4096 (4KiB) is normally plenty.
  97
  98 endmenu
  99
 100 menu "Boot media"
 101
 102 config NOR_BOOT
 103         bool "Support for booting from NOR flash"
 104         depends on NOR
 105         help
 106           Enabling this will make a U-Boot binary that is capable of being
 107           booted via NOR.  In this case we will enable certain pinmux early
 108           as the ROM only partially sets up pinmux.  We also default to using
 109           NOR for environment.
 110
 111 config NAND_BOOT
 112         bool "Support for booting from NAND flash"
 113         default n
 114         help
 115           Enabling this will make a U-Boot binary that is capable of being
 116           booted via NAND flash. This is not a must, some SoCs need this,
 117           some not.
 118
 119 config ONENAND_BOOT
 120         bool "Support for booting from ONENAND"
 121         default n
 122         help
 123           Enabling this will make a U-Boot binary that is capable of being
 124           booted via ONENAND. This is not a must, some SoCs need this,
 125           some not.
 126
 127 config QSPI_BOOT
 128         bool "Support for booting from QSPI flash"
 129         default n
 130         help
 131           Enabling this will make a U-Boot binary that is capable of being
 132           booted via QSPI flash. This is not a must, some SoCs need this,
 133           some not.
 134
 135 config SATA_BOOT
 136         bool "Support for booting from SATA"
 137         default n
 138         help
 139           Enabling this will make a U-Boot binary that is capable of being
 140           booted via SATA. This is not a must, some SoCs need this,
 141           some not.
 142
 143 config SD_BOOT
 144         bool "Support for booting from SD/EMMC"
 145         default n
 146         help
 147           Enabling this will make a U-Boot binary that is capable of being
 148           booted via SD/EMMC. This is not a must, some SoCs need this,
 149           some not.
 150
 151 config SPI_BOOT
 152         bool "Support for booting from SPI flash"
 153         default n
 154         help
 155           Enabling this will make a U-Boot binary that is capable of being
 156           booted via SPI flash. This is not a must, some SoCs need this,
 157           some not.
 158
 159 endmenu
 160
 161 config BOOTDELAY
 162         int "delay in seconds before automatically booting"
 163         default 2
 164         depends on AUTOBOOT
 165         help
 166           Delay before automatically running bootcmd;
 167           set to 0 to autoboot with no delay, but you can stop it by key input.
 168           set to -1 to disable autoboot.
 169           set to -2 to autoboot with no delay and not check for abort
 170
 171           See doc/README.autoboot for details.
 172
 173 config CONSOLE_RECORD
 174         bool "Console recording"
 175         help
 176           This provides a way to record console output (and provide console
 177           input) through circular buffers. This is mostly useful for testing.
 178           Console output is recorded even when the console is silent.
 179           To enable console recording, call console_record_reset_enable()
 180           from your code.
 181
 182 config CONSOLE_RECORD_OUT_SIZE
 183         hex "Output buffer size"
 184         depends on CONSOLE_RECORD
 185         default 0x400 if CONSOLE_RECORD
 186         help
 187           Set the size of the console output buffer. When this fills up, no
 188           more data will be recorded until some is removed. The buffer is
 189           allocated immediately after the malloc() region is ready.
 190
 191 config CONSOLE_RECORD_IN_SIZE
 192         hex "Input buffer size"
 193         depends on CONSOLE_RECORD
 194         default 0x100 if CONSOLE_RECORD
 195         help
 196           Set the size of the console input buffer. When this contains data,
 197           tstc() and getc() will use this in preference to real device input.
 198           The buffer is allocated immediately after the malloc() region is
 199           ready.
 200
 201 config IDENT_STRING
 202         string "Board specific string to be added to uboot version string"
 203         help
 204           This options adds the board specific name to u-boot version.
 205
 206 config SYS_NO_FLASH
 207         bool "Disable support for parallel NOR flash"
 208         default n
 209         help
 210           This option is used to disable support for parallel NOR flash.
 211
 212 config VERSION_VARIABLE
 213         bool "add U-Boot environment variable vers"
 214         default n
 215         help
 216           If this variable is defined, an environment variable
 217           named "ver" is created by U-Boot showing the U-Boot
 218           version as printed by the "version" command.
 219           Any change to this variable will be reverted at the
 220           next reset.
 221
 222 config DISPLAY_CPUINFO
 223         bool "Display information about the CPU during start up"
 224         default y if ARM || BLACKFIN || NIOS2 || X86 || XTENSA
 225         help
 226           Display information about the CPU that U-Boot is running on
 227           when U-Boot starts up. The function print_cpuinfo() is called
 228           to do this.
 229
 230 config DISPLAY_BOARDINFO
 231         bool "Display information about the board during start up"
 232         default y if ARM || M68K || MIPS || PPC || SPARC || XTENSA
 233         help
 234           Display information about the board that U-Boot is running on
 235           when U-Boot starts up. The board function checkboard() is called
 236           to do this.
 237
 238 source "common/spl/Kconfig"