common/Kconfig

   1 menu "Boot timing"
   2
   3 config BOOTSTAGE
   4         bool "Boot timing and reporting"
   5         help
   6           Enable recording of boot time while booting. To use it, insert
   7           calls to bootstage_mark() with a suitable BOOTSTAGE_ID from
   8           bootstage.h. Only a single entry is recorded for each ID. You can
   9           give the entry a name with bootstage_mark_name(). You can also
  10           record elapsed time in a particular stage using bootstage_start()
  11           before starting and bootstage_accum() when finished. Bootstage will
  12           add up all the accumulated time and report it.
  13
  14           Normally, IDs are defined in bootstage.h but a small number of
  15           additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC
  16           as the ID.
  17
  18           Calls to show_boot_progress() will also result in log entries but
  19           these will not have names.
  20
  21 config BOOTSTAGE_REPORT
  22         bool "Display a detailed boot timing report before booting the OS"
  23         depends on BOOTSTAGE
  24         help
  25           Enable output of a boot time report just before the OS is booted.
  26           This shows how long it took U-Boot to go through each stage of the
  27           boot process. The report looks something like this:
  28
  29                 Timer summary in microseconds:
  30                        Mark    Elapsed  Stage
  31                           0          0  reset
  32                   3,575,678  3,575,678  board_init_f start
  33                   3,575,695         17  arch_cpu_init A9
  34                   3,575,777         82  arch_cpu_init done
  35                   3,659,598     83,821  board_init_r start
  36                   3,910,375    250,777  main_loop
  37                  29,916,167 26,005,792  bootm_start
  38                  30,361,327    445,160  start_kernel
  39
  40 config BOOTSTAGE_USER_COUNT
  41         hex "Number of boot ID numbers available for user use"
  42         default 20
  43         help
  44           This is the number of available user bootstage records.
  45           Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...)
  46           a new ID will be allocated from this stash. If you exceed
  47           the limit, recording will stop.
  48
  49 config BOOTSTAGE_FDT
  50         bool "Store boot timing information in the OS device tree"
  51         depends on BOOTSTAGE
  52         help
  53           Stash the bootstage information in the FDT. A root 'bootstage'
  54           node is created with each bootstage id as a child. Each child
  55           has a 'name' property and either 'mark' containing the
  56           mark time in microseconds, or 'accum' containing the
  57           accumulated time for that bootstage id in microseconds.
  58           For example:
  59
  60                 bootstage {
  61                         154 {
  62                                 name = "board_init_f";
  63                                 mark = <3575678>;
  64                         };
  65                         170 {
  66                                 name = "lcd";
  67                                 accum = <33482>;
  68                         };
  69                 };
  70
  71           Code in the Linux kernel can find this in /proc/devicetree.
  72
  73 config BOOTSTAGE_STASH
  74         bool "Stash the boot timing information in memory before booting OS"
  75         depends on BOOTSTAGE
  76         help
  77           Some OSes do not support device tree. Bootstage can instead write
  78           the boot timing information in a binary format at a given address.
  79           This happens through a call to bootstage_stash(), typically in
  80           the CPU's cleanup_before_linux() function. You can use the
  81           'bootstage stash' and 'bootstage unstash' commands to do this on
  82           the command line.
  83
  84 config BOOTSTAGE_STASH_ADDR
  85         hex "Address to stash boot timing information"
  86         default 0
  87         help
  88           Provide an address which will not be overwritten by the OS when it
  89           starts, so that it can read this information when ready.
  90
  91 config BOOTSTAGE_STASH_SIZE
  92         hex "Size of boot timing stash region"
  93         default 4096
  94         help
  95           This should be large enough to hold the bootstage stash. A value of
  96           4096 (4KiB) is normally plenty.
  97
  98 endmenu
  99
 100 menu "Boot media"
 101
 102 config NOR_BOOT
 103         bool "Support for booting from NOR flash"
 104         depends on NOR
 105         help
 106           Enabling this will make a U-Boot binary that is capable of being
 107           booted via NOR.  In this case we will enable certain pinmux early
 108           as the ROM only partially sets up pinmux.  We also default to using
 109           NOR for environment.
 110
 111 config NAND_BOOT
 112         bool "Support for booting from NAND flash"
 113         default n
 114         help
 115           Enabling this will make a U-Boot binary that is capable of being
 116           booted via NAND flash. This is not a must, some SoCs need this,
 117           some not.
 118
 119 config ONENAND_BOOT
 120         bool "Support for booting from ONENAND"
 121         default n
 122         help
 123           Enabling this will make a U-Boot binary that is capable of being
 124           booted via ONENAND. This is not a must, some SoCs need this,
 125           some not.
 126
 127 config QSPI_BOOT
 128         bool "Support for booting from QSPI flash"
 129         default n
 130         help
 131           Enabling this will make a U-Boot binary that is capable of being
 132           booted via QSPI flash. This is not a must, some SoCs need this,
 133           some not.
 134
 135 config SATA_BOOT
 136         bool "Support for booting from SATA"
 137         default n
 138         help
 139           Enabling this will make a U-Boot binary that is capable of being
 140           booted via SATA. This is not a must, some SoCs need this,
 141           some not.
 142
 143 config SD_BOOT
 144         bool "Support for booting from SD/EMMC"
 145         default n
 146         help
 147           Enabling this will make a U-Boot binary that is capable of being
 148           booted via SD/EMMC. This is not a must, some SoCs need this,
 149           some not.
 150
 151 config SPI_BOOT
 152         bool "Support for booting from SPI flash"
 153         default n
 154         help
 155           Enabling this will make a U-Boot binary that is capable of being
 156           booted via SPI flash. This is not a must, some SoCs need this,
 157           some not.
 158
 159 endmenu
 160
 161 config BOOTDELAY
 162         int "delay in seconds before automatically booting"
 163         default 2
 164         depends on AUTOBOOT
 165         help
 166           Delay before automatically running bootcmd;
 167           set to 0 to autoboot with no delay, but you can stop it by key input.
 168           set to -1 to disable autoboot.
 169           set to -2 to autoboot with no delay and not check for abort
 170
 171           See doc/README.autoboot for details.
 172
 173 menu "Console"
 174
 175 config MENU
 176         bool
 177         help
 178           This is the library functionality to provide a text-based menu of
 179           choices for the user to make choices with.
 180
 181 config CONSOLE_RECORD
 182         bool "Console recording"
 183         help
 184           This provides a way to record console output (and provide console
 185           input) through circular buffers. This is mostly useful for testing.
 186           Console output is recorded even when the console is silent.
 187           To enable console recording, call console_record_reset_enable()
 188           from your code.
 189
 190 config CONSOLE_RECORD_OUT_SIZE
 191         hex "Output buffer size"
 192         depends on CONSOLE_RECORD
 193         default 0x400 if CONSOLE_RECORD
 194         help
 195           Set the size of the console output buffer. When this fills up, no
 196           more data will be recorded until some is removed. The buffer is
 197           allocated immediately after the malloc() region is ready.
 198
 199 config CONSOLE_RECORD_IN_SIZE
 200         hex "Input buffer size"
 201         depends on CONSOLE_RECORD
 202         default 0x100 if CONSOLE_RECORD
 203         help
 204           Set the size of the console input buffer. When this contains data,
 205           tstc() and getc() will use this in preference to real device input.
 206           The buffer is allocated immediately after the malloc() region is
 207           ready.
 208
 209 config IDENT_STRING
 210         string "Board specific string to be added to uboot version string"
 211         help
 212           This options adds the board specific name to u-boot version.
 213
 214 config SILENT_CONSOLE
 215         bool "Support a silent console"
 216         help
 217           This option allows the console to be silenced, meaning that no
 218           output will appear on the console devices. This is controlled by
 219           setting the environment vaariable 'silent' to a non-empty value.
 220           Note this also silences the console when booting Linux.
 221
 222           When the console is set up, the variable is checked, and the
 223           GD_FLG_SILENT flag is set. Changing the environment variable later
 224           will update the flag.
 225
 226 config SILENT_U_BOOT_ONLY
 227         bool "Only silence the U-Boot console"
 228         depends on SILENT_CONSOLE
 229         help
 230           Normally when the U-Boot console is silenced, Linux's console is
 231           also silenced (assuming the board boots into Linux). This option
 232           allows the linux console to operate normally, even if U-Boot's
 233           is silenced.
 234
 235 config SILENT_CONSOLE_UPDATE_ON_SET
 236         bool "Changes to the 'silent' environment variable update immediately"
 237         depends on SILENT_CONSOLE
 238         default y if SILENT_CONSOLE
 239         help
 240           When the 'silent' environment variable is changed, update the
 241           console silence flag immediately. This allows 'setenv' to be used
 242           to silence or un-silence the console.
 243
 244           The effect is that any change to the variable will affect the
 245           GD_FLG_SILENT flag.
 246
 247 config SILENT_CONSOLE_UPDATE_ON_RELOC
 248         bool "Allow flags to take effect on relocation"
 249         depends on SILENT_CONSOLE
 250         help
 251           In some cases the environment is not available until relocation
 252           (e.g. NAND). This option makes the value of the 'silent'
 253           environment variable take effect at relocation.
 254
 255 config PRE_CONSOLE_BUFFER
 256         bool "Buffer characters before the console is available"
 257         help
 258           Prior to the console being initialised (i.e. serial UART
 259           initialised etc) all console output is silently discarded.
 260           Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
 261           buffer any console messages prior to the console being
 262           initialised to a buffer. The buffer is a circular buffer, so
 263           if it overflows, earlier output is discarded.
 264
 265           Note that this is not currently supported in SPL. It would be
 266           useful to be able to share the pre-console buffer with SPL.
 267
 268 config PRE_CON_BUF_SZ
 269         int "Sets the size of the pre-console buffer"
 270         depends on PRE_CONSOLE_BUFFER
 271         default 4096
 272         help
 273           The size of the pre-console buffer affects how much console output
 274           can be held before it overflows and starts discarding earlier
 275           output. Normally there is very little output at this early stage,
 276           unless debugging is enabled, so allow enough for ~10 lines of
 277           text.
 278
 279           This is a useful feature if you are using a video console and
 280           want to see the full boot output on the console. Without this
 281           option only the post-relocation output will be displayed.
 282
 283 config PRE_CON_BUF_ADDR
 284         hex "Address of the pre-console buffer"
 285         depends on PRE_CONSOLE_BUFFER
 286         default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I
 287         default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I
 288         help
 289           This sets the start address of the pre-console buffer. This must
 290           be in available memory and is accessed before relocation and
 291           possibly before DRAM is set up. Therefore choose an address
 292           carefully.
 293
 294           We should consider removing this option and allocating the memory
 295           in board_init_f_init_reserve() instead.
 296
 297 config CONSOLE_MUX
 298         bool "Enable console multiplexing"
 299         default y if DM_VIDEO || VIDEO || LCD
 300         help
 301           This allows multiple devices to be used for each console 'file'.
 302           For example, stdout can be set to go to serial and video.
 303           Similarly, stdin can be set to come from serial and keyboard.
 304           Input can be provided from either source. Console multiplexing
 305           adds a small amount of size to U-Boot.  Changes to the environment
 306           variables stdout, stdin and stderr will take effect immediately.
 307
 308 config SYS_CONSOLE_IS_IN_ENV
 309         bool "Select console devices from the environment"
 310         default y if CONSOLE_MUX
 311         help
 312           This allows multiple input/output devices to be set at boot time.
 313           For example, if stdout is set to "serial,video" then output will
 314           be sent to both the serial and video devices on boot. The
 315           environment variables can be updated after boot to change the
 316           input/output devices.
 317
 318 config SYS_CONSOLE_OVERWRITE_ROUTINE
 319         bool "Allow board control over console overwriting"
 320         help
 321           If this is enabled, and the board-specific function
 322           overwrite_console() returns 1, the stdin, stderr and stdout are
 323           switched to the serial port, else the settings in the environment
 324           are used. If this is not enabled, the console will not be switched
 325           to serial.
 326
 327 config SYS_CONSOLE_ENV_OVERWRITE
 328         bool "Update environment variables during console init"
 329         help
 330           The console environment variables (stdout, stdin, stderr) can be
 331           used to determine the correct console devices on start-up. This
 332           option writes the console devices to these variables on console
 333           start-up (after relocation). This causes the environment to be
 334           updated to match the console devices actually chosen.
 335
 336 config SYS_CONSOLE_INFO_QUIET
 337         bool "Don't display the console devices on boot"
 338         help
 339           Normally U-Boot displays the current settings for stdout, stdin
 340           and stderr on boot when the post-relocation console is set up.
 341           Enable this option to supress this output. It can be obtained by
 342           calling stdio_print_current_devices() from board code.
 343
 344 config SYS_STDIO_DEREGISTER
 345         bool "Allow deregistering stdio devices"
 346         default y if USB_KEYBOARD
 347         help
 348           Generally there is no need to deregister stdio devices since they
 349           are never deactivated. But if a stdio device is used which can be
 350           removed (for example a USB keyboard) then this option can be
 351           enabled to ensure this is handled correctly.
 352
 353 endmenu
 354
 355 config DEFAULT_FDT_FILE
 356         string "Default fdt file"
 357         help
 358           This option is used to set the default fdt file to boot OS.
 359
 360 config SYS_NO_FLASH
 361         bool "Disable support for parallel NOR flash"
 362         default n
 363         help
 364           This option is used to disable support for parallel NOR flash.
 365
 366 config VERSION_VARIABLE
 367         bool "add U-Boot environment variable vers"
 368         default n
 369         help
 370           If this variable is defined, an environment variable
 371           named "ver" is created by U-Boot showing the U-Boot
 372           version as printed by the "version" command.
 373           Any change to this variable will be reverted at the
 374           next reset.
 375
 376 config DISPLAY_CPUINFO
 377         bool "Display information about the CPU during start up"
 378         default y if ARM || BLACKFIN || NIOS2 || X86 || XTENSA
 379         help
 380           Display information about the CPU that U-Boot is running on
 381           when U-Boot starts up. The function print_cpuinfo() is called
 382           to do this.
 383
 384 config DISPLAY_BOARDINFO
 385         bool "Display information about the board during start up"
 386         default y if ARM || M68K || MIPS || PPC || SPARC || XTENSA
 387         help
 388           Display information about the board that U-Boot is running on
 389           when U-Boot starts up. The board function checkboard() is called
 390           to do this.
 391
 392 source "common/spl/Kconfig"