2 * Copyright (c) 2011 The Chromium OS Authors.
3 * (C) Copyright 2002-2006
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
8 * Marius Groeger <mgroeger@sysgo.de>
10 * SPDX-License-Identifier: GPL-2.0+
14 #include <linux/compiler.h>
16 #include <environment.h>
19 #if defined(CONFIG_CMD_IDE)
26 /* TODO: Can we move these into arch/ headers? */
42 #include <asm/errno.h>
47 #include <asm/sections.h>
49 #include <asm/init_helpers.h>
50 #include <asm/relocate.h>
53 #include <asm/state.h>
55 #include <linux/compiler.h>
58 * Pointer to initial global data area
60 * Here we initialize it if needed.
62 #ifdef XTRN_DECLARE_GLOBAL_DATA_PTR
63 #undef XTRN_DECLARE_GLOBAL_DATA_PTR
64 #define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */
65 DECLARE_GLOBAL_DATA_PTR
= (gd_t
*) (CONFIG_SYS_INIT_GD_ADDR
);
67 DECLARE_GLOBAL_DATA_PTR
;
71 * sjg: IMO this code should be
72 * refactored to a single function, something like:
74 * void led_set_state(enum led_colour_t colour, int on);
76 /************************************************************************
77 * Coloured LED functionality
78 ************************************************************************
79 * May be supplied by boards if desired
81 inline void __coloured_LED_init(void) {}
82 void coloured_LED_init(void)
83 __attribute__((weak
, alias("__coloured_LED_init")));
84 inline void __red_led_on(void) {}
85 void red_led_on(void) __attribute__((weak
, alias("__red_led_on")));
86 inline void __red_led_off(void) {}
87 void red_led_off(void) __attribute__((weak
, alias("__red_led_off")));
88 inline void __green_led_on(void) {}
89 void green_led_on(void) __attribute__((weak
, alias("__green_led_on")));
90 inline void __green_led_off(void) {}
91 void green_led_off(void) __attribute__((weak
, alias("__green_led_off")));
92 inline void __yellow_led_on(void) {}
93 void yellow_led_on(void) __attribute__((weak
, alias("__yellow_led_on")));
94 inline void __yellow_led_off(void) {}
95 void yellow_led_off(void) __attribute__((weak
, alias("__yellow_led_off")));
96 inline void __blue_led_on(void) {}
97 void blue_led_on(void) __attribute__((weak
, alias("__blue_led_on")));
98 inline void __blue_led_off(void) {}
99 void blue_led_off(void) __attribute__((weak
, alias("__blue_led_off")));
102 * Why is gd allocated a register? Prior to reloc it might be better to
103 * just pass it around to each function in this file?
105 * After reloc one could argue that it is hardly used and doesn't need
106 * to be in a register. Or if it is it should perhaps hold pointers to all
107 * global data for all modules, so that post-reloc we can avoid the massive
108 * literal pool we get on ARM. Or perhaps just encourage each module to use
113 * Could the CONFIG_SPL_BUILD infection become a flag in gd?
116 #if defined(CONFIG_WATCHDOG)
117 static int init_func_watchdog_init(void)
119 puts(" Watchdog enabled\n");
125 int init_func_watchdog_reset(void)
131 #endif /* CONFIG_WATCHDOG */
133 void __board_add_ram_info(int use_default
)
135 /* please define platform specific board_add_ram_info() */
138 void board_add_ram_info(int)
139 __attribute__ ((weak
, alias("__board_add_ram_info")));
141 static int init_baud_rate(void)
143 gd
->baudrate
= getenv_ulong("baudrate", 10, CONFIG_BAUDRATE
);
147 static int display_text_info(void)
149 #ifndef CONFIG_SANDBOX
150 ulong bss_start
, bss_end
;
152 #ifdef CONFIG_SYS_SYM_OFFSETS
153 bss_start
= _bss_start_ofs
+ _TEXT_BASE
;
154 bss_end
= _bss_end_ofs
+ _TEXT_BASE
;
156 bss_start
= (ulong
)&__bss_start
;
157 bss_end
= (ulong
)&__bss_end
;
159 debug("U-Boot code: %08X -> %08lX BSS: -> %08lX\n",
160 CONFIG_SYS_TEXT_BASE
, bss_start
, bss_end
);
163 #ifdef CONFIG_MODEM_SUPPORT
164 debug("Modem Support enabled\n");
166 #ifdef CONFIG_USE_IRQ
167 debug("IRQ Stack: %08lx\n", IRQ_STACK_START
);
168 debug("FIQ Stack: %08lx\n", FIQ_STACK_START
);
174 static int announce_dram_init(void)
181 static int init_func_ram(void)
183 #ifdef CONFIG_BOARD_TYPES
184 int board_type
= gd
->board_type
;
186 int board_type
= 0; /* use dummy arg */
189 gd
->ram_size
= initdram(board_type
);
191 if (gd
->ram_size
> 0)
194 puts("*** failed ***\n");
199 static int show_dram_config(void)
203 #ifdef CONFIG_NR_DRAM_BANKS
206 debug("\nRAM Configuration:\n");
207 for (i
= size
= 0; i
< CONFIG_NR_DRAM_BANKS
; i
++) {
208 size
+= gd
->bd
->bi_dram
[i
].size
;
209 debug("Bank #%d: %08lx ", i
, gd
->bd
->bi_dram
[i
].start
);
211 print_size(gd
->bd
->bi_dram
[i
].size
, "\n");
219 print_size(size
, "");
220 board_add_ram_info(0);
226 ulong
get_effective_memsize(void)
228 #ifndef CONFIG_VERY_BIG_RAM
231 /* limit stack to what we can reasonable map */
232 return ((gd
->ram_size
> CONFIG_MAX_MEM_MAPPED
) ?
233 CONFIG_MAX_MEM_MAPPED
: gd
->ram_size
);
237 void __dram_init_banksize(void)
239 #if defined(CONFIG_NR_DRAM_BANKS) && defined(CONFIG_SYS_SDRAM_BASE)
240 gd
->bd
->bi_dram
[0].start
= CONFIG_SYS_SDRAM_BASE
;
241 gd
->bd
->bi_dram
[0].size
= get_effective_memsize();
245 void dram_init_banksize(void)
246 __attribute__((weak
, alias("__dram_init_banksize")));
248 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
249 static int init_func_i2c(void)
252 i2c_init(CONFIG_SYS_I2C_SPEED
, CONFIG_SYS_I2C_SLAVE
);
258 #if defined(CONFIG_HARD_SPI)
259 static int init_func_spi(void)
269 static int zero_global_data(void)
271 memset((void *)gd
, '\0', sizeof(gd_t
));
276 static int setup_mon_len(void)
278 #ifdef CONFIG_SYS_SYM_OFFSETS
279 gd
->mon_len
= _bss_end_ofs
;
280 #elif defined(CONFIG_SANDBOX)
281 gd
->mon_len
= (ulong
)&_end
- (ulong
)_init
;
283 /* TODO: use (ulong)&__bss_end - (ulong)&__text_start; ? */
284 gd
->mon_len
= (ulong
)&__bss_end
- CONFIG_SYS_MONITOR_BASE
;
289 __weak
int arch_cpu_init(void)
294 #ifdef CONFIG_OF_HOSTFILE
296 #define CHECK(x) err = (x); if (err) goto failed;
298 /* Create an empty device tree blob */
299 static int make_empty_fdt(void *fdt
)
303 CHECK(fdt_create(fdt
, 256));
304 CHECK(fdt_finish_reservemap(fdt
));
305 CHECK(fdt_begin_node(fdt
, ""));
306 CHECK(fdt_end_node(fdt
));
307 CHECK(fdt_finish(fdt
));
311 printf("Unable to create empty FDT: %s\n", fdt_strerror(err
));
315 static int read_fdt_from_file(void)
317 struct sandbox_state
*state
= state_get_current();
322 blob
= map_sysmem(CONFIG_SYS_FDT_LOAD_ADDR
, 0);
323 if (!state
->fdt_fname
) {
324 err
= make_empty_fdt(blob
);
329 err
= fs_set_blk_dev("host", NULL
, FS_TYPE_SANDBOX
);
332 size
= fs_read(state
->fdt_fname
, CONFIG_SYS_FDT_LOAD_ADDR
, 0, 0);
343 #ifdef CONFIG_SANDBOX
344 static int setup_ram_buf(void)
346 gd
->arch
.ram_buf
= os_malloc(CONFIG_SYS_SDRAM_SIZE
);
347 assert(gd
->arch
.ram_buf
);
348 gd
->ram_size
= CONFIG_SYS_SDRAM_SIZE
;
354 static int setup_fdt(void)
356 #ifdef CONFIG_OF_EMBED
357 /* Get a pointer to the FDT */
358 gd
->fdt_blob
= _binary_dt_dtb_start
;
359 #elif defined CONFIG_OF_SEPARATE
360 /* FDT is at end of image */
361 # ifdef CONFIG_SYS_SYM_OFFSETS
362 gd
->fdt_blob
= (void *)(_end_ofs
+ CONFIG_SYS_TEXT_BASE
);
364 gd
->fdt_blob
= (ulong
*)&_end
;
366 #elif defined(CONFIG_OF_HOSTFILE)
367 if (read_fdt_from_file()) {
368 puts("Failed to read control FDT\n");
372 /* Allow the early environment to override the fdt address */
373 gd
->fdt_blob
= (void *)getenv_ulong("fdtcontroladdr", 16,
374 (uintptr_t)gd
->fdt_blob
);
378 /* Get the top of usable RAM */
379 __weak ulong
board_get_usable_ram_top(ulong total_size
)
384 static int setup_dest_addr(void)
386 debug("Monitor len: %08lX\n", gd
->mon_len
);
388 * Ram is setup, size stored in gd !!
390 debug("Ram size: %08lX\n", (ulong
)gd
->ram_size
);
391 #if defined(CONFIG_SYS_MEM_TOP_HIDE)
393 * Subtract specified amount of memory to hide so that it won't
394 * get "touched" at all by U-Boot. By fixing up gd->ram_size
395 * the Linux kernel should now get passed the now "corrected"
396 * memory size and won't touch it either. This should work
397 * for arch/ppc and arch/powerpc. Only Linux board ports in
398 * arch/powerpc with bootwrapper support, that recalculate the
399 * memory size from the SDRAM controller setup will have to
402 gd
->ram_size
-= CONFIG_SYS_MEM_TOP_HIDE
;
404 #ifdef CONFIG_SYS_SDRAM_BASE
405 gd
->ram_top
= CONFIG_SYS_SDRAM_BASE
;
407 gd
->ram_top
+= get_effective_memsize();
408 gd
->ram_top
= board_get_usable_ram_top(gd
->mon_len
);
409 gd
->relocaddr
= gd
->ram_top
;
410 debug("Ram top: %08lX\n", (ulong
)gd
->ram_top
);
411 #if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
413 * We need to make sure the location we intend to put secondary core
414 * boot code is reserved and not used by any part of u-boot
416 if (gd
->relocaddr
> determine_mp_bootpg(NULL
)) {
417 gd
->relocaddr
= determine_mp_bootpg(NULL
);
418 debug("Reserving MP boot page to %08lx\n", gd
->relocaddr
);
424 #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
425 static int reserve_logbuffer(void)
427 /* reserve kernel log buffer */
428 gd
->relocaddr
-= LOGBUFF_RESERVE
;
429 debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN
,
436 /* reserve protected RAM */
437 static int reserve_pram(void)
441 reg
= getenv_ulong("pram", 10, CONFIG_PRAM
);
442 gd
->relocaddr
-= (reg
<< 10); /* size is in kB */
443 debug("Reserving %ldk for protected RAM at %08lx\n", reg
,
447 #endif /* CONFIG_PRAM */
449 /* Round memory pointer down to next 4 kB limit */
450 static int reserve_round_4k(void)
452 gd
->relocaddr
&= ~(4096 - 1);
456 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \
458 static int reserve_mmu(void)
460 /* reserve TLB table */
461 gd
->arch
.tlb_size
= 4096 * 4;
462 gd
->relocaddr
-= gd
->arch
.tlb_size
;
464 /* round down to next 64 kB limit */
465 gd
->relocaddr
&= ~(0x10000 - 1);
467 gd
->arch
.tlb_addr
= gd
->relocaddr
;
468 debug("TLB table from %08lx to %08lx\n", gd
->arch
.tlb_addr
,
469 gd
->arch
.tlb_addr
+ gd
->arch
.tlb_size
);
475 static int reserve_lcd(void)
477 #ifdef CONFIG_FB_ADDR
478 gd
->fb_base
= CONFIG_FB_ADDR
;
480 /* reserve memory for LCD display (always full pages) */
481 gd
->relocaddr
= lcd_setmem(gd
->relocaddr
);
482 gd
->fb_base
= gd
->relocaddr
;
483 #endif /* CONFIG_FB_ADDR */
486 #endif /* CONFIG_LCD */
488 static int reserve_trace(void)
491 gd
->relocaddr
-= CONFIG_TRACE_BUFFER_SIZE
;
492 gd
->trace_buff
= map_sysmem(gd
->relocaddr
, CONFIG_TRACE_BUFFER_SIZE
);
493 debug("Reserving %dk for trace data at: %08lx\n",
494 CONFIG_TRACE_BUFFER_SIZE
>> 10, gd
->relocaddr
);
500 #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) \
501 && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
502 static int reserve_video(void)
504 /* reserve memory for video display (always full pages) */
505 gd
->relocaddr
= video_setmem(gd
->relocaddr
);
506 gd
->fb_base
= gd
->relocaddr
;
512 static int reserve_uboot(void)
515 * reserve memory for U-Boot code, data & bss
516 * round down to next 4 kB limit
518 gd
->relocaddr
-= gd
->mon_len
;
519 gd
->relocaddr
&= ~(4096 - 1);
521 /* round down to next 64 kB limit so that IVPR stays aligned */
522 gd
->relocaddr
&= ~(65536 - 1);
525 debug("Reserving %ldk for U-Boot at: %08lx\n", gd
->mon_len
>> 10,
528 gd
->start_addr_sp
= gd
->relocaddr
;
533 #ifndef CONFIG_SPL_BUILD
534 /* reserve memory for malloc() area */
535 static int reserve_malloc(void)
537 gd
->start_addr_sp
= gd
->start_addr_sp
- TOTAL_MALLOC_LEN
;
538 debug("Reserving %dk for malloc() at: %08lx\n",
539 TOTAL_MALLOC_LEN
>> 10, gd
->start_addr_sp
);
543 /* (permanently) allocate a Board Info struct */
544 static int reserve_board(void)
546 gd
->start_addr_sp
-= sizeof(bd_t
);
547 gd
->bd
= (bd_t
*)map_sysmem(gd
->start_addr_sp
, sizeof(bd_t
));
548 memset(gd
->bd
, '\0', sizeof(bd_t
));
549 debug("Reserving %zu Bytes for Board Info at: %08lx\n",
550 sizeof(bd_t
), gd
->start_addr_sp
);
555 static int setup_machine(void)
557 #ifdef CONFIG_MACH_TYPE
558 gd
->bd
->bi_arch_number
= CONFIG_MACH_TYPE
; /* board id for Linux */
563 static int reserve_global_data(void)
565 gd
->start_addr_sp
-= sizeof(gd_t
);
566 gd
->new_gd
= (gd_t
*)map_sysmem(gd
->start_addr_sp
, sizeof(gd_t
));
567 debug("Reserving %zu Bytes for Global Data at: %08lx\n",
568 sizeof(gd_t
), gd
->start_addr_sp
);
572 static int reserve_fdt(void)
575 * If the device tree is sitting immediate above our image then we
576 * must relocate it. If it is embedded in the data section, then it
577 * will be relocated with other data.
580 gd
->fdt_size
= ALIGN(fdt_totalsize(gd
->fdt_blob
) + 0x1000, 32);
582 gd
->start_addr_sp
-= gd
->fdt_size
;
583 gd
->new_fdt
= map_sysmem(gd
->start_addr_sp
, gd
->fdt_size
);
584 debug("Reserving %lu Bytes for FDT at: %08lx\n",
585 gd
->fdt_size
, gd
->start_addr_sp
);
591 static int reserve_stacks(void)
593 #ifdef CONFIG_SPL_BUILD
595 gd
->start_addr_sp
-= 128; /* leave 32 words for abort-stack */
596 gd
->irq_sp
= gd
->start_addr_sp
;
603 /* setup stack pointer for exceptions */
604 gd
->start_addr_sp
-= 16;
605 gd
->start_addr_sp
&= ~0xf;
606 gd
->irq_sp
= gd
->start_addr_sp
;
609 * Handle architecture-specific things here
610 * TODO(sjg@chromium.org): Perhaps create arch_reserve_stack()
611 * to handle this and put in arch/xxx/lib/stack.c
614 # ifdef CONFIG_USE_IRQ
615 gd
->start_addr_sp
-= (CONFIG_STACKSIZE_IRQ
+ CONFIG_STACKSIZE_FIQ
);
616 debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
617 CONFIG_STACKSIZE_IRQ
+ CONFIG_STACKSIZE_FIQ
, gd
->start_addr_sp
);
619 /* 8-byte alignment for ARM ABI compliance */
620 gd
->start_addr_sp
&= ~0x07;
622 /* leave 3 words for abort-stack, plus 1 for alignment */
623 gd
->start_addr_sp
-= 16;
624 # elif defined(CONFIG_PPC)
625 /* Clear initial stack frame */
626 s
= (ulong
*) gd
->start_addr_sp
;
627 *s
= 0; /* Terminate back chain */
628 *++s
= 0; /* NULL return address */
629 # endif /* Architecture specific code */
635 static int display_new_sp(void)
637 debug("New Stack Pointer is: %08lx\n", gd
->start_addr_sp
);
643 static int setup_board_part1(void)
648 * Save local variables to board info struct
651 bd
->bi_memstart
= CONFIG_SYS_SDRAM_BASE
; /* start of memory */
652 bd
->bi_memsize
= gd
->ram_size
; /* size in bytes */
654 #ifdef CONFIG_SYS_SRAM_BASE
655 bd
->bi_sramstart
= CONFIG_SYS_SRAM_BASE
; /* start of SRAM */
656 bd
->bi_sramsize
= CONFIG_SYS_SRAM_SIZE
; /* size of SRAM */
659 #if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
660 defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
661 bd
->bi_immr_base
= CONFIG_SYS_IMMR
; /* base of IMMR register */
663 #if defined(CONFIG_MPC5xxx)
664 bd
->bi_mbar_base
= CONFIG_SYS_MBAR
; /* base of internal registers */
666 #if defined(CONFIG_MPC83xx)
667 bd
->bi_immrbar
= CONFIG_SYS_IMMR
;
673 static int setup_board_part2(void)
677 bd
->bi_intfreq
= gd
->cpu_clk
; /* Internal Freq, in Hz */
678 bd
->bi_busfreq
= gd
->bus_clk
; /* Bus Freq, in Hz */
679 #if defined(CONFIG_CPM2)
680 bd
->bi_cpmfreq
= gd
->arch
.cpm_clk
;
681 bd
->bi_brgfreq
= gd
->arch
.brg_clk
;
682 bd
->bi_sccfreq
= gd
->arch
.scc_clk
;
683 bd
->bi_vco
= gd
->arch
.vco_out
;
684 #endif /* CONFIG_CPM2 */
685 #if defined(CONFIG_MPC512X)
686 bd
->bi_ipsfreq
= gd
->arch
.ips_clk
;
687 #endif /* CONFIG_MPC512X */
688 #if defined(CONFIG_MPC5xxx)
689 bd
->bi_ipbfreq
= gd
->arch
.ipb_clk
;
690 bd
->bi_pcifreq
= gd
->pci_clk
;
691 #endif /* CONFIG_MPC5xxx */
697 #ifdef CONFIG_SYS_EXTBDINFO
698 static int setup_board_extra(void)
702 strncpy((char *) bd
->bi_s_version
, "1.2", sizeof(bd
->bi_s_version
));
703 strncpy((char *) bd
->bi_r_version
, U_BOOT_VERSION
,
704 sizeof(bd
->bi_r_version
));
706 bd
->bi_procfreq
= gd
->cpu_clk
; /* Processor Speed, In Hz */
707 bd
->bi_plb_busfreq
= gd
->bus_clk
;
708 #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
709 defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
710 defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
711 bd
->bi_pci_busfreq
= get_PCI_freq();
712 bd
->bi_opbfreq
= get_OPB_freq();
713 #elif defined(CONFIG_XILINX_405)
714 bd
->bi_pci_busfreq
= get_PCI_freq();
722 static int init_post(void)
724 post_bootmode_init();
725 post_run(NULL
, POST_ROM
| post_bootmode_get(0));
731 static int setup_baud_rate(void)
733 /* Ick, can we get rid of this line? */
734 gd
->bd
->bi_baudrate
= gd
->baudrate
;
739 static int setup_dram_config(void)
741 /* Ram is board specific, so move it to board code ... */
742 dram_init_banksize();
747 static int reloc_fdt(void)
750 memcpy(gd
->new_fdt
, gd
->fdt_blob
, gd
->fdt_size
);
751 gd
->fdt_blob
= gd
->new_fdt
;
757 static int setup_reloc(void)
759 gd
->reloc_off
= gd
->relocaddr
- CONFIG_SYS_TEXT_BASE
;
760 memcpy(gd
->new_gd
, (char *)gd
, sizeof(gd_t
));
762 debug("Relocation Offset is: %08lx\n", gd
->reloc_off
);
763 debug("Relocating to %08lx, new gd at %08lx, sp at %08lx\n",
764 gd
->relocaddr
, (ulong
)map_to_sysmem(gd
->new_gd
),
770 /* ARM calls relocate_code from its crt0.S */
771 #if !defined(CONFIG_ARM)
773 static int jump_to_copy(void)
776 * x86 is special, but in a nice way. It uses a trampoline which
777 * enables the dcache if possible.
779 * For now, other archs use relocate_code(), which is implemented
780 * similarly for all archs. When we do generic relocation, hopefully
781 * we can make all archs enable the dcache prior to relocation.
785 * SDRAM and console are now initialised. The final stack can now
786 * be setup in SDRAM. Code execution will continue in Flash, but
787 * with the stack in SDRAM and Global Data in temporary memory
790 board_init_f_r_trampoline(gd
->start_addr_sp
);
791 #elif defined(CONFIG_SANDBOX)
792 board_init_r(gd
->new_gd
, 0);
794 relocate_code(gd
->start_addr_sp
, gd
->new_gd
, gd
->relocaddr
);
801 /* Record the board_init_f() bootstage (after arch_cpu_init()) */
802 static int mark_bootstage(void)
804 bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F
, "board_init_f");
809 static init_fnc_t init_sequence_f
[] = {
810 #if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
811 !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
812 !defined(CONFIG_MPC86xx) && !defined(CONFIG_X86)
815 #ifdef CONFIG_SANDBOX
821 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
822 /* TODO: can this go into arch_cpu_init()? */
825 arch_cpu_init
, /* basic arch cpu dependent setup */
827 cpu_init_f
, /* TODO(sjg@chromium.org): remove */
828 # ifdef CONFIG_OF_CONTROL
829 find_fdt
, /* TODO(sjg@chromium.org): remove */
833 #ifdef CONFIG_OF_CONTROL
836 #if defined(CONFIG_BOARD_EARLY_INIT_F)
839 /* TODO: can any of this go into arch_cpu_init()? */
840 #if defined(CONFIG_PPC) && !defined(CONFIG_8xx_CPUCLK_DEFAULT)
841 get_clocks
, /* get CPU and bus clocks (etc.) */
842 #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
843 && !defined(CONFIG_TQM885D)
844 adjust_sdram_tbs_8xx
,
846 /* TODO: can we rename this to timer_init()? */
850 timer_init
, /* initialize timer */
852 #ifdef CONFIG_SYS_ALLOC_DPRAM
853 #if !defined(CONFIG_CPM2)
857 #if defined(CONFIG_BOARD_POSTCLK_INIT)
860 #ifdef CONFIG_FSL_ESDHC
863 env_init
, /* initialize environment */
864 #if defined(CONFIG_8xx_CPUCLK_DEFAULT)
865 /* get CPU and bus clocks according to the environment variable */
867 /* adjust sdram refresh rate according to the new clock */
871 init_baud_rate
, /* initialze baudrate settings */
872 serial_init
, /* serial communications setup */
873 console_init_f
, /* stage 1 init of console */
874 #ifdef CONFIG_SANDBOX
875 sandbox_early_getopt_check
,
877 #ifdef CONFIG_OF_CONTROL
880 display_options
, /* say that we are here */
881 display_text_info
, /* show debugging info if required */
882 #if defined(CONFIG_8260)
885 #endif /* CONFIG_8260 */
886 #if defined(CONFIG_MPC83xx)
892 #if defined(CONFIG_DISPLAY_CPUINFO)
893 print_cpuinfo
, /* display cpu info (and speed) */
895 #if defined(CONFIG_MPC5xxx)
897 #endif /* CONFIG_MPC5xxx */
898 #if defined(CONFIG_DISPLAY_BOARDINFO)
899 checkboard
, /* display board info */
901 INIT_FUNC_WATCHDOG_INIT
902 #if defined(CONFIG_MISC_INIT_F)
905 INIT_FUNC_WATCHDOG_RESET
906 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
909 #if defined(CONFIG_HARD_SPI)
913 dram_init_f
, /* configure available RAM banks */
914 calculate_relocation_address
,
917 /* TODO: unify all these dram functions? */
919 dram_init
, /* configure available RAM banks */
927 INIT_FUNC_WATCHDOG_RESET
928 #if defined(CONFIG_SYS_DRAM_TEST)
930 #endif /* CONFIG_SYS_DRAM_TEST */
931 INIT_FUNC_WATCHDOG_RESET
936 INIT_FUNC_WATCHDOG_RESET
938 * Now that we have DRAM mapped and working, we can
939 * relocate the code and continue running from DRAM.
941 * Reserve memory at end of RAM for (top down in that order):
942 * - area that won't get touched by U-Boot and Linux (optional)
943 * - kernel log buffer
947 * - board info struct
950 #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
957 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \
965 /* TODO: Why the dependency on CONFIG_8xx? */
966 #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) \
967 && !defined(CONFIG_ARM) && !defined(CONFIG_X86)
971 #ifndef CONFIG_SPL_BUILD
983 INIT_FUNC_WATCHDOG_RESET
988 #ifdef CONFIG_SYS_EXTBDINFO
991 INIT_FUNC_WATCHDOG_RESET
1000 void board_init_f(ulong boot_flags
)
1008 gd
->flags
= boot_flags
;
1010 if (initcall_run_list(init_sequence_f
))
1014 /* NOTREACHED - jump_to_copy() does not return */
1021 * For now this code is only used on x86.
1023 * init_sequence_f_r is the list of init functions which are run when
1024 * U-Boot is executing from Flash with a semi-limited 'C' environment.
1025 * The following limitations must be considered when implementing an
1027 * - 'static' variables are read-only
1028 * - Global Data (gd->xxx) is read/write
1030 * The '_f_r' sequence must, as a minimum, copy U-Boot to RAM (if
1031 * supported). It _should_, if possible, copy global data to RAM and
1032 * initialise the CPU caches (to speed up the relocation process)
1034 * NOTE: At present only x86 uses this route, but it is intended that
1035 * all archs will move to this when generic relocation is implemented.
1037 static init_fnc_t init_sequence_f_r
[] = {
1041 do_elf_reloc_fixups
,
1046 void board_init_f_r(void)
1048 if (initcall_run_list(init_sequence_f_r
))
1052 * U-Boot has been copied into SDRAM, the BSS has been cleared etc.
1053 * Transfer execution from Flash to RAM by calculating the address
1054 * of the in-RAM copy of board_init_r() and calling it
1056 (board_init_r
+ gd
->reloc_off
)(gd
, gd
->relocaddr
);
1058 /* NOTREACHED - board_init_r() does not return */
1061 #endif /* CONFIG_X86 */